- don't mark them as singleton to allow coexistence of multiple versions
in the same installation
- add missing version qualifier to Eclipse-SourceBundle header
see
https://dev.eclipse.org/mhonarc/lists/cross-project-issues-dev/msg10524.html
Change-Id: Ie4e028038f5a1d3e18b0be06c3d2ea82e7f9068d
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
* changes:
Do not rewrite parents in RevWalkTextBuiltins
RevWalk: Allow disabling parent rewriting
RevWalkTextBuiltin: Add -n to limit number of commits returned
Default behavior of C git is to skip parent rewriting unless
particular history simplification or --parents flags are passed. Since
JGit has no such flags, JGit should not rewrite parents.
Change-Id: I9ba0e70fe6d5f49f975b71eea46f93198900f37d
Previously, setting any TreeFilter on a RevWalk triggered parent
rewriting, which in the current StartGenerator implementation ends up
buffering the entire commit history in memory. Aside from causing poor
performance on large histories, this does not match the default
behavior of `git rev-list`, which does not rewrite parent SHAs unless
asked to via --parents/--children.
Add a new method setRewriteParents() to RevWalk to disable this
behavior. Continue rewriting parents by default to maintain backwards
compatibility.
Change-Id: I1f38e05526071c75ca58095e312663de5e6f334d
Using the lane position and other data for equals/hashCode is not
useful.
Change-Id: I7af151d8a84544a77a486474c8ac71dd80090c66
Signed-off-by: Konrad Kügler <swamblumat-eclipsebugs@yahoo.de>
When blaming a merge commit with "Ignore whitespace changes" enabled,
don't discard blame candidates for other parents when we encounter a
parent that only has whitespace changes compared to the merge result.
The algorithm early prepares parents for blaming, removing the
appropriate blame regions from the list of regions still to blame. Only
at the end, the prepared blame candidates are submitted for blaming.
When looking at a non-first parent which only differs in whitespace to
the merge result, it submitted that parent, but only to blame it for the
(usually few) lines not already prepared to blame on other parents. Due
to an early return the blame candidates for the previous parents were
forgotten, leaving many lines unannotated.
bug: 433024
Change-Id: I43c9caf2078b92b05e652dbed2192568907bf199
Signed-off-by: Konrad Kügler <swamblumat-eclipsebugs@yahoo.de>
When JGit uses bitmaps (which is the case after a gc), the push command
doesn't go through the code where MissingObjectExceptions are caught
for remote objects not found locally.
Fixed by removing earlier non-locally-found remote objects.
This was seen withing gerrit, see:
https://code.google.com/p/gerrit/issues/detail?id=2025
Bug: 426044
Change-Id: Ieda718a0530e3680036edfa0963ab88fdd1362c0
Signed-off-by: Jean-Jacques Lafay <jeanjacques.lafay@gmail.com>
Signed-off-by: Doug Kelly <dougk.ff7@gmail.com>
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
This makes it easy to edit the pom.xml from within Eclipse.
Change-Id: I4718217caadbfe892b7cbb557e0d3d6b40d48321
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
If remote name contains / or there was a branch directly under the
refs/remotes namespace (wrong) the computation of remote name and
suggested local branch name would fail. Fix this by looking at the
configured remotes. A ref under refs/remotes that does not match a
remote configuration is not considered a remote tracking branch anymore.
This patch does not fix all similar errors in EGit/JGit.
Bug: 411002
Bug: 400414
Change-Id: I2515a6ed05f9104c387ce4e43b24dae942ae2473
Instead of requiring the caller to know how to list remote
names or parse remote branch names, add a few utilities for
that.
Change-Id: Ib6b2403532f4abbce594a03c0b9da49d30b19f70
Signed-off-by: Robin Rosenberg <robin.rosenberg@dewire.com>
* changes:
Commit changes generated during repo command
Added implementation of copyfile rule.
Added groups support to repo subcommand.
Added the command line of jgit repo.
Implemented first part of the repo sub-command.
JGit caches the contents of the known_hosts file within JSch when
first started, and never attempts to re-read it. If the contents
change (such as when using Gerrit replication), the new host will
never be found.
On failures, try reloading the knonwn_hosts and retry the
connection, in addition to reloading the credentials.
Change-Id: I980c4f4003f2a48c71b9b47c51e640d1e7742f58
Signed-off-by: Doug Kelly <dougk.ff7@gmail.com>
Streaming packed deltas is so slow that it never feasibly completes
(it will take hours for it to stream a few hundred megabytes on
relatively fast systems with a large amount of storage). This
was indicated as a "failed experiment" by Shawn in the following
mailing list post:
http://dev.eclipse.org/mhonarc/lists/jgit-dev/msg01674.html
Change-Id: Idc12f59e37b122f13856d7b533a5af9d8867a8a5
Signed-off-by: Doug Kelly <dougk.ff7@gmail.com>
Currently the repo sub-command only "works", but the submodules will have .git
directories themselves, and lacks group support.
Change-Id: I88a6ee07109187c6c9bfd92a044775fcfb5befa6
Signed-off-by: Yuxuan 'fishy' Wang <fishywang@google.com>
* changes:
blame: Reuse existing blameEntireRegionOnParent method
blame: Remove unnecessary curly braces around single statement if
blame: Allow candidate to manage its setup before output
blame: Do not update candidate regionList during output
blame: Only use computeRange if -L was requested
When a commit is blamed for multiple lines of the result file the
command line interface prints the same text before each line in that
span. Format these strings once and reuse them as the line prefix.
For long files (e.g. 2425 lines of ReceiveCommits.java in Gerrit)
this can save as much as 20ms during the output phase of the command
line blame program.
Change-Id: Ie42787d77c8d0cbca7ccbf59c795120494a2a891
Skipping directly to the parent is already possible with an existing
helper method. Update the source path (to follow the rename) and then
use the existing code path to push the parent inside the current entry.
Change-Id: Icb1d49e53d14b599efc478990613625a9e058e09
Pass in the RevWalk and let the candidate decide how to prepare itself
for output. This removes the conditional for the missing sourceCommit,
as candidates missing a commit can override the method with a no-op.
Change-Id: I3fa19b8676dfd3c177583f8f42593b5000b5350d
Instead of updating the candidate's regionList field to iterate
through the linked list of regions, use a special purpose field
in the BlameGenerator. This allows the candidate to be unmodified.
Change-Id: I2cda031b59220ab603ef82050e741ecbbaa1953f
The computeRange method is inefficient for computing the entire file.
If the entire file was selected ask for the entire file.
Change-Id: I8b2dbf635e875cc125443dac50be121208646540
If an error occurs in command line option parsing the error message
may be stuck in a Java level buffer. Flush the stream to ensure
everything is made available to the calling process or terminal.
Change-Id: I55b16e43aa96fc81c1197121032f5cdd901d412c
If the caller uses a BatchRefUpdate to execute these (e.g. fetch)
there may be more detailed status information inside of the command
that was used to execute it. Allow the caller to obtain that status
data from the ReceiveCommand version of the TrackingRefUpdate.
Change-Id: I47209377fb8fcef0346d7678f1ab27f4790b49bc
* changes:
diff: Optimize single line edits
blame: Reduce running time ~4.5% by skipping common subtrees
blame: Micro optimize blob lookup in tree
blame: Automatically increase commit abbreviation length
Blame correctly in the presence of conflicting merges
If the header and trailer are identical up to a single line on both
sides, return that REPLACE edit as the only result. No algorithm can
break down a REPLACE with height of 1.
Change-Id: I483c40e8790cc3e8b322ef6dfce2299491fd0ac7
The version attribute of Eclipse-SourceBundle must match
the bundle version.
Change-Id: Ic629ccae1d89c9070e4ec80420a0e2ed7d403922
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
With this commit running blame on render_view_impl.cc[1] saves
about 644 ms over prior versions, reducing the time about 4.5%.
Large projects often contain strands of commits where no changes
are made to a particular subtree. Blame used to dive recursively
into these subtrees to look for the blob and check if its SHA-1
was changed. In chromium/src[1] only 20% of the commits modify
the content/renderer subtree relevant for the file.
The recursivePath is necessary to check for '/' and remember
if common subtree elimination should be attempted. When a file
lives within a subtree the extra cost to check for unmodified
subtrees saves time. However for files in the root tree the
extra work incurred by TreeWalk is not worthwhile and would
significantly increase overall running time.
Now typical running times from an otherwise idle desktop:
real 0m13.387s 0m13.341s 0m13.443s
user 0m15.410s 0m15.220s 0m15.350s
previously:
real 0m14.085s 0m14.049s 0m13.968s
user 0m15.730s 0m15.820s 0m15.770s
[1] 34d6e5c5b4/content/renderer/render_view_impl.cc
Change-Id: Ib16d684df7ffa034ee28def3fb22c797998d5b7b
Dave Borowitz
Matthias Sohn
Laurent Goubet
Robin Rosenberg
Shawn Pearce
Konrad Kügler
Jean-Jacques Lafay
Bogdan Gheorghe
Yuxuan 'fishy' Wang
Doug Kelly
Shawn Pearce