StreamCopyThread#run consistently interrupts itself whenever it
discovers it has been interrupted by StreamCopyThread#flush while not
reading. The flushCount is not needed to avoid lost flushes.
All in-tree users of StreamCopyThread never flush. As a nice side
benefit, this avoids the expense of atomic operations that have no
purpose for those users.
Change-Id: I1afe415cd09a67f1891c3baf712a9003ad553062
Now that RepositoryCache have a time based eviction strategy, get rid
of the strategy to evict cache entries if heap memory is running low,
i.e. soft references. Main reason why time based eviction was
implemented was to offer an alternative to the unpredictable soft
references.
Relying on soft references is not working, especially in large heap. The
JVM GC will consider collecting soft references as last resort before
throwing an out of memory error. For example, an application like Gerrit
configured with a 128GB heap, GC will wait until all 128GB is filled
before collecting the soft references so the application will be
suffering long pauses caused by GC for a long time already. In other
words, you will have to restart application because it's unusable before
JVM eviction kicks in.
Keeping the SoftReference in RepositoryCache is causing more harm than
good. If you use the time based eviction (which is the default strategy)
and want to tune JVM to release soft references more aggressively, it
will release repositories from the cache even though they are not
expired which defeats the purpose of the repository cache.
Gerrit uses Lucene library which uses soft references and this is
causing a "memory leak" except if you configure JVM to release soft
references more aggressively which have the nasty side effect of
evicting non expired repositories from the cache.
Change-Id: I9940bd800464c7f007696d0ccde52ea617b2ebce
Signed-off-by: Hugo Arès <hugo.ares@ericsson.com>
Work around issues with JSch not handling interrupts by
isolating the JSch interactions onto another thread.
Run write and flush on a single threaded Executor using
simple Callable operations wrapping the method calls,
waiting on the future to determine the outcome before
allowing the caller to continue.
If any operation was interrupted the state of the stream
becomes fuzzy at close time. The implementation tries to
interrupt the pending write or flush, but this is very
likely to corrupt the stream object, so exceptions are
ignored during such a dirty close.
Change-Id: I42e3ba3d8c35a2e40aad340580037ebefbb99b53
In case a value is used which isn’t a power of 2 there will be a high
chance of java.lang.ArrayIndexOutBoundsException and
org.eclipse.jgit.errors.CorruptObjectException due to a mismatching
assumption for the DfsBlockCache#blockSizeShift parameter.
Change-Id: Ib348b3704edf10b5f93a3ffab4fa6f09cbbae231
Signed-off-by: Philipp Marx <smigfu@googlemail.com>
* GC.tooManyLooseObjects() always responded true since the loop missed
to advance the iterator so it always incremented until the threshold was
exceeded.
* Also fix loop exit criterion which was off by 1.
* Add some tests.
Change-Id: I70976dfaa026efbcf3c46bd45941f37277a18e04
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
StreamCopyThread.flush was introduced in
61645b938bc934fda3b0624c5bac1e3495634750 (Add timeouts to smart
transport clients, 2009-06-19) to support timeouts on write in JSch.
The commit message from that change explains:
JSch made a timeout on write difficult because they explicitly do
a catch for InterruptedException inside of their OutputStream. We
have to work around that by creating an additional thread that just
shuttles data between our own OutputStream and the real JSch stream.
The code that runs on that thread is structured as follows:
while (!done) {
int n = src.read(buf);
dst.write(buf, 0, n);
}
with src being a PipedInputStream representing the data to be written
to JSch. To add flush support, that change wanted to add an extra step
if (wantFlush)
dst.flush();
but to handle the case where the thread is blocked in the read() call
waiting for new input, it needs to interrupt the read. So that is how
it works: the caller runs
pipeOut.write(some data);
pipeOut.flush();
copyThread.flush();
to write some data and force it to flush by interrupting the read.
After the pipeOut.flush(), the StreamCopyThread reads the data that was
written and prepares to copy it out. If the copyThread.flush() call
interrupts the copyThread before it acquires writeLock and starts
writing, we throw away the data we just read to fulfill the flush.
Oops.
Noticed during the review of e67d59df3f
(StreamCopyThread: Do not let flush interrupt a write, 2016-11-04),
which introduced this bug.
Change-Id: I4aceb5610e1bfb251046097adf46bca54bc1d998
flush calls interrupt() to interrupt a pending read and trigger a
flush. Unfortunately that interrupt() call can also interrupt a
pending write, putting Jsch in a bad state and triggering "Short read
of block" errors. Add locking to ensure the flush only interrupts
reads as intended.
Change-Id: Ib105d9e107ae43549ced7e6da29c22ee41cde9d8
If there was a new flush() call during flush previous bytes, we need to
catch it in order to process the new bytes between the two flush()
calls instead of going to last catch IOException clause and end the
thread.
Change-Id: Ibc58a1fa97559238c13590aedbb85e482d85e465
Signed-off-by: Zhen Chen <czhen@google.com>
ObjectId is serializable, and so are its subtypes. Ensure that
serialization does not follow the hash collision chain internal to the
ObjectIdOwnerMap, otherwise completely unrelated objects may get
serialized when a RevObject is serialized.
Note that serializing a RevCommit or RevTag may serialize quite a few
objects due to the parent/object links they contain. A user has no real
control over how many objects will be written when a RevCommit is
serialized. C.f [1]. This change does not resolve that, but in any case
this internal hash collision chain link should not participate in
serialization.
[1] https://github.com/gitblit/gitblit/pull/1141
Change-Id: Ice331a9dc80a59ca360fcc04adaff8b5e750d847
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
Previously, the streamFileThreshold, the threshold at which a file
would be streamed rather than loaded entirely into memory, was only
configurable on a global basis.
This commit makes this threshold configurable on a per-loader basis.
Bug: 490404
Change-Id: I492c18c3155dbf56eedda9044a61d76120fd75f9
Signed-off-by: Kevin Corcoran <kevin.corcoran@puppetlabs.com>
Signed-off-by: David Pursehouse <david.pursehouse@gmail.com>
With the auto option, gc checks whether any housekeeping is required; if
not, it exits without performing any work. Some JGit commands run gc
--auto after performing operations that could create many loose objects.
Housekeeping is required if there are too many loose objects or too many
packs in the repository.
If the number of loose objects exceeds the value of the gc.auto option
jgit's GC consolidates all existing packs into a single pack (equivalent
to -A option), whereas git-core would combine all loose objects into a
single pack using repack -d -l. Setting the value of gc.auto to 0
disables automatic packing of loose objects.
If the number of packs exceeds the value of gc.autoPackLimit, then
existing packs (except those marked with a .keep file) are consolidated
into a single pack by using the -A option of repack. Setting
gc.autoPackLimit to 0 disables automatic consolidation of packs.
Like git the following jgit commands run auto gc:
- fetch
- merge
- rebase
- receive-pack
The auto gc for receive-pack can be suppressed by setting the config
option receive.autogc = false
Change-Id: I68a2a051b39ec2c53cb7c4b8f6c596ba65eeba5d
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
The new method addPaths(List<String>) allows callers to add multiple
paths without having to iterate over several calls to addPath(String).
Change-Id: I2c3746a97ead7118fb0ed5543a2c843224719031
Signed-off-by: David Pursehouse <david.pursehouse@gmail.com>
This SIOOBE happens reproducibly when trying to access
a repository containing Cygwin symlinks
Change-Id: I25f103fcc723bac7bfaaeee333a86f11627a92c7
Signed-off-by: Marc Strapetz <marc.strapetz@syntevo.com>
Signed-off-by: David Pursehouse <david.pursehouse@gmail.com>
Remove the assumption that the local repository is a file based one.
Change-Id: I8f10fe7a54e9fc07f2a23d7901e52b65aa570d45
Signed-off-by: Thomas Meyer <thomas.mey@web.de>
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Git barfs on these (and they don't make any sense), so we certainly
shouldn't write them.
Change-Id: I3faf8554a05f0fd147be2e63fbe55987d3f88099
Signed-off-by: David Turner <dturner@twosigma.com>
Signed-off-by: David Pursehouse <david.pursehouse@gmail.com>
Allow for higher concurrency on DfsBlockCache by adding a configuration
for number of estimated concurrent requests.
Change-Id: Ia65e58ecb2c459b6d9c9697a2f715d933270f7e6
Signed-off-by: Philipp Marx <smigfu@googlemail.com>
Adding a space before the unit ('g', 'm', 'k) causes git to fail with
the error:
fatal: bad numeric config value
Change-Id: I57f11d3a1cdcca4549858e773af1a2a80fc0369f
Signed-off-by: David Turner <dturner@twosigma.com>
Signed-off-by: David Pursehouse <david.pursehouse@gmail.com>
The 'factory' field is lazy initialized in the detect() method.
According to FindBugs:
Because the compiler or processor may reorder instructions, threads
are not guaranteed to see a completely initialized object, if the
method can be called by multiple threads.
Fix this by declaring the member as 'volatile'.
Change-Id: Ib32663bb28c9564584256e01f625b4e7875e6223
Signed-off-by: David Pursehouse <david.pursehouse@gmail.com>
To avoid that people try to "fix" it.
Change-Id: Ib4b35e357e4c068a17243ebd2d57b058c54d5834
Signed-off-by: David Pursehouse <david.pursehouse@gmail.com>
Earlier we tried to close the repository before removing it from the
cache, so close only reduced refcount but didn't close it.
Now that we no longer leak usage count on purpose and the usage count is
now ignored anyway, there is no longer a need to run the removal twice.
Change-Id: I8b62cec6d8a3e88c096d1f37a1f7f5a5066c90a0
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
If the repository close method was called twice (or more) for one open,
the usage count became negative and the repository was never be evicted
from the cache because the method checking if repository is expired was
not considering negative usage count.
Change-Id: I18a80c415c54c37d1b9def2b311ff2d0afa455ca
Signed-off-by: Hugo Arès <hugo.ares@ericsson.com>
Symlinks on MacOS are written as UTF-8 NFD, but
readSymbolicLink().toString() converts to NFC with potentially fewer
bytes. May occur in particular if the link target has non-ASCII
characters for which the NFC and NFD encodings differ. This may lead
to an EOFException: Short read of block.
This causes all kinds of weird effects in EGit, ranging from failing
rebases (which report the exception to the user) to EGit decorations in
the navigator silently disappearing (and never coming back).
* Rename readContentAsNormalizedString() to readSymlinkTarget() as it's
called only for symlinks. Also make it protected.
* Fix by allowing the read to succeed even if less than the expected
number of bytes are returned by the entry's input stream.
* Override in FileTreeIterator to use fs.readSymlink() directly.
Includes a new MacOS-only test.
Change-Id: I264c5972d67b1cbb1ed690580f5706e671b9affd
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Spawn an ObjectReader from the ObjectInserter, so the flush can be
delayed at the end of the fetch.
Change-Id: I35fe8c8370c06c25262645202aec2b1318057c19
Signed-off-by: Zhen Chen <czhen@google.com>
The package-private method Repository::gitInternalSlash() is not
referenced from anywhere within the package.
Last uses were removed with
0f8743d4 "Remove deprecated Tree, TreeEntry, FileTreeEntry and friends"
6e9fdce9 "Kill GitIndex"
Signed-off-by: Rüdiger Herrmann <ruediger.herrmann@gmx.de>
Change-Id: I514bf684ad0da808f6523e9e46db9674a25e1fb5
CheckoutCommand was not returning updated and removed files in case of
an overall status of NONDELETED. That's status which occurs especially
on the Windows platform when Checkout wanted to delete files but the
filesystem doesn't allow this. The situation is more seldom on linux/mac
because open filehandles don't stop a deletion attempt and checkout
succeeds more often.
Change-Id: I4828008e58c09bd8f9edaf0f7eda0a79c629fb57
There was a bug when carrying over flags from a merge commit to its
non-first parents. The first parent of a merge commit was handled
differently and correct but the non-first parents are handled by a
recursive algorithm. Flags should be copied from the root merge commit
to parent-2, to grandparent-2, ... up to the limit of STACK_DEPTH==500
parents-levels. But the recursive algorithm was always copying only to
the direct parents of the merge commit and not the grand*-parents.
This seems to be no problem when commits are handled in a strict date
order because then copying only one level is no problem if children are
handled before parents. But when commits are not seperated anymore by
distinctive correct dates (e.g. because all commits have the same date)
then it may happen that a merge-parent is handled before the merge
commit and when dealing later with the merge commit one has to copy
flags down to more than one level
Bug: 501211
Change-Id: I2d79a7cf1e3bce21a490905ccd9d5e502d7b8421
There are already suppressions for the same warnings in other parts
of this class.
Change-Id: Ic3b45525c6c8200cba975d14c7650cedb4409a4d
Signed-off-by: David Pursehouse <david.pursehouse@gmail.com>
UploadPackLogger is deprecated but will not be removed until
JGit version 5.0.
Suppress the unavoidable deprecation warnings on usages of the
interface that are kept for backwards compatibility.
Add a TODO so that we don't forget to remove it in 5.0.
Change-Id: Id248002b9bdf23db192427196d54c722a012106c
Signed-off-by: David Pursehouse <david.pursehouse@gmail.com>
Repository.close() method is used when reference counting and expiration
needs to be honored. The RepositoryCache.unregisterAndCloseRepository
method should close the repository unconditionally. This is also indicated
from its javadoc.
Change-Id: I19392d1eaa17f27ae44b55eea49dcff05a52f298
The class AtomicObjectOutputStream should be available to all lfs
related classes, not only to the server side. Move the class from
org.eclipse.jgit.lfs.server.fs to org.eclipse.jgit.lfs.internal to
achieve that.
Change-Id: I028e1c9ec7c21f316340b21d558b9a6b77e2060d
Adds a JGit built-in implementation of the "git lfs smudge" filter. This
filter should do the same as the one described in [1] besides that it
only supports the local case when the lfs objects are already present in
the media directory. Remote cases where download of LFS objects from an
LFS server is needed will be done in a later commit.
[1] https://github.com/github/git-lfs/blob/master/docs/man/git-lfs-smudge.1.ronn
Change-Id: I8ff661d4edd3667ef7f86f3b4fa33e568eb4c8f4
If the configuration parameter filter.<filterDriverName>.useJGitBuiltin
is set to true then for all corresponding filters JGit will try to
execute the built-in filter instead of the filter-command which is
defined in git configuration. It will fallback to the non-built-in
filters if no built-in filters are registered or if constructing them
leads to exceptions. If set to false JGit will not try to execute
built-in filters for the specified filter driver.
Example: The configuration contains the following lines
[filter "lfs"]
clean = git-lfs clean -- %f
smudge = git-lfs smudge -- %f
useJGitBuiltin = true
Addtionally the .gitattributes file in the root of the working tree
contains:
*.bin filter=lfs
In this case when new content is added similar to "git add 1.bin" then
the following will happen:
- jgit will check whether a built-in command factory was registered
for the command "jgit://builtin/lfs/clean". If that is true the
factory is used to create a built-in filter command and that
command is used to filter the content
- Otherwise jgit will call the external program "git lfs clean ..."
to do the filtering
Change-Id: Idadb1db06b1e89e7031d7ed6319904973c367d38
JGit supports smudge filters defined in repository configuration. The
filters are implemented as external programs filtering content by
accepting the original content (as seen in git's object database) on
stdin and which emit the filtered content on stdout. This content is
then written to the file in the working tree. To run such a filter JGit
has to start an external process and pump data into/from this process.
This commit adds support for built-in smudge filters which are
implemented in Java and which are executed by jgit's main thread. When a
filter is defined in the configuration as
"jgit://builtin/<filterDriverName>/smudge" then JGit will lookup in a
static map whether a builtin filter is registered under this name. If
found such a filter is called to do the filtering.
The functionality in this commit requires that a program using JGit
explicitly calls the JGit API to register built-in implementations for
specific smudge filters. In follow-up commits configuration parameters
will be added which trigger such registrations.
Change-Id: Ia743aa0dbed795e71e5792f35ae55660e0eb3c24
JGit supports clean filters defined in repository configuration. The
filters are implemented as external programs filtering content by
accepting the original content (as seen in the working tree) on stdin
and which emit the filtered content on stdout. To run such a filter JGit
has to start an external process and pump data into/from this process.
This commit adds support for clean filters which are implemented
in Java and which are executed by jgit's main thread. When a filter is
defined in the configuration as
"jgit://builtin/<filterDriverName>/clean" then JGit will lookup in a
static map whether a filter is registered under this name. If found
such a filter is called to do the filtering.
The functionality in this commit requires that a program using JGit
explicitly calls the JGit API to register built-in implementations for
specific clean filters. In follow-up commits configuration parameters
will be added which trigger such registrations. Other commits will add
implementations for lfs filters.
Change-Id: I0344d3c54801c9a46e5a606c5df17e5f2e17b2be
This is like PackStatistics, but for PackParser.
Change-Id: I854215c0956fd0b36843d631780be303e021b8be
Signed-off-by: Masaya Suzuki <masayasuzuki@google.com>
BranchConfig treated this config property as a boolean, but git also
allows the values "preserve" and "interactive". Config property
pull.rebase also allows the same values.
Replace private enum PullCommand.PullRebaseMode by new public enum
BranchConfig.BranchRebaseMode and adapt all uses. Add a new setter to
PullCommand.
Note: PullCommand will treat "interactive" like "true", i.e., as a
non-interactive rebase. Not sure how "interactive" should be handled.
At least it won't balk on it.
Bug: 499482
Change-Id: I7309360f5662b2c2efa1bd8ea6f112c63cf064af
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
Change-Id: I6691b454404dd4db3c690ecfc7515de765bc2ef7
Signed-off-by: Martin Goellnitz <m.goellnitz@outlook.com>
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Jonathan Nieder
Hugo Arès
Shawn Pearce
Philipp Marx
Matthias Sohn
Zhen Chen
Thomas Wolf
Kevin Corcoran
Christian Halstrick
David Pursehouse
Marc Strapetz
Thomas Meyer
David Turner
Rüdiger Herrmann
Saša Živkov
Masaya Suzuki
Andrey Loskutov
Martin Goellnitz