The error message for an Exception thrown by StartGenerator when given
both the TOPO flag and the TOPO_KEEP_BRANCH_TOGETHER flag mentions a
non-existent flag, TOPO_NON_INTERMIX. The error message was introduced
in commit e498d43.
Replace TOPO_NON_INTERMIX with TOPO_KEEP_BRANCH_TOGETHER in the error
message of an Exception thrown by the StartGenerator when the TOPO flag
is provided together with the TOPO_KEEP_BRANCH_TOGETHER flag.
Signed-off-by: Alex Spradlin <alexaspradlin@google.com>
Change-Id: Id24640dc08e96a196508fe38ce144aa7e035082f
The topological sort algorithm in TopoSortGenerator for RevWalk may mix
multiple lines of history, producing results that differ from C git's
git-log whose man page states: "Show no parents before all of its
children are shown, and avoid showing commits on multiple lines of
history intermixed." Lines of history are mixed because
TopoSortGenerator merely delays producing a commit until all of its
children have been produced; it does not immediately produce a commit
after its last child has been produced.
Therefore, add a new RevSort option called TOPO_KEEP_BRANCH_TOGETHER
with a new topo sort algorithm in TopoNonIntermixGenerator. In the
Generator, when the last child of a commit has been produced, unpop
that commit so that it will be returned upon the subsequent call to
next(). To avoid producing duplicates, mark commits that have not yet
been produced as TOPO_QUEUED so that when a commit is popped, it is
produced if and only if TOPO_QUEUED is set.
To support nesting with other generators that may produce the same
commit multiple times like DepthGenerator (for example, StartGenerator
does this), do not increment parent inDegree for the same child commit
more than once.
Commit b5e764abd2 modified the existing
TopoSortGenerator to avoid mixing lines of history, but it was reverted
in e40c38ab08 because the new behavior
caused problems for EGit users. This motivated adding a new Generator
for the new behavior.
Signed-off-by: Alex Spradlin <alexaspradlin@google.com>
Change-Id: Icbb24eac98c00e45c175b01e1c8122554f617933
Does not fix any issue but prevents user from shooting themselves in the
foot with improper configuration.
Suggested by Demetr Starshov at https://git.eclipse.org/r/#/c/157681/
Change-Id: I006d65022f0a7d4066970825d00080c59404fdc3
Signed-off-by: Michael Dardis <git@md-5.net>
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
The externalized error message added in f4fc640 ("BasePackConnection:
Check for expected length of ref advertisement", Dec 18, 2019) uses a
malformed string format. Since there is only one formatting argument,
it should be referenced with '{0}' rather than '{1}'.
Change-Id: Ibda864dfb0bb902fe07ae4bba73117b212046e8a
Signed-off-by: David Pursehouse <david.pursehouse@gmail.com>
Use ServiceLoader and define
org.eclipse.jgit.transport.DefaultSshSessionFactory in
META-INF/services/org.eclipse.jgit.transport.SshSessionFactory so that
the legacy behavior is still the same.
Bug: 553625
Change-Id: Id1a65506140d921ed76d83699e3817f0d2ca08ed
Signed-off-by: Emmanuel Hugonnet <ehugonne@redhat.com>
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
SSLContext.getInstance("TLS") by default behaves differently on IBM
JDK than on Oracle or OpenJDK.[1] On IBM JDK one gets sockets that
have only TLSv1 enabled, which makes HTTPS connections fail since most
servers refuse this old protocol version. On Oracle JDK/OpenJDK, one
gets sockets with all available protocol versions enabled.
Explicitly enable all available TLS protocol versions to make
HTTPS connections work also on IBM JDK.
[1] https://www.ibm.com/support/knowledgecenter/en/SSYKE2_8.0.0/com.ibm.java.security.component.80.doc/security-component/jsse2Docs/matchsslcontext_tls.html#matchsslcontext_tls
Bug: 558709
Change-Id: I5ffc57a78e67a6239b9dad54840a49a8ed28930a
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
When a conflicting file was blamed, JGit would not identify lines
coming from the merge parents. The main cause for this was that
Blame and BlameCommand simply added the first DirCacheEntry found
for a file to its queue of candidates (blobs or commits) to consider.
In case of a conflict this typically is the merge base commit, and
comparing a auto-merged contents against that base would yield
incorrect results.
Such cases have to be handled specially. The candidate to be
considered by the blame must use the working tree contents, but
at the same time behave like a merge commit/candidate with HEAD
and the MERGE_HEADs as parents. Canonical git does something very
similar, see [1].
Implement that and add tests.
I first did this for the JGit pgm Blame command. When I then tried
to do the same in BlameCommand, I noticed that the latter also
included some fancy but incomplete CR-LF handling. In order to
be able to use the new BlameGenerator.prepareHead() also in
BlameCommand this CR-LF handling was also moved into BlameGenerator
and corrected in doing so.
(Just considering the git config settings was not good enough,
CR-LF behavior can also be influenced by .gitattributes, and even
by whether the file in the index has CR-LF. To correctly determine
CR-LF handling for check-in one needs to do a TreeWalk with at
least a FileTreeIterator and a DirCacheIterator.)
[1] https://github.com/git/git/blob/v2.22.0/blame.c#L174
Bug: 434330
Change-Id: I9d763dd6ba478b0b6ebf9456049d6301f478ef7c
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
Reftable is a binary, block-based storage format for the ref-database.
It provides several advantages over the traditional packed + loose
storage format:
* O(1) write performance, even for deletions and transactions.
* atomic updates to the ref database.
* O(log N) lookup and prefix scans
* free from restrictions imposed by the file system: it is
case-sensitive even on case-insensitive file systems, and has
no inherent limitations for directory/file conflicts
* prefix compression reduces space usage for repetitive ref names,
such as gerrit's refs/changes/xx/xxxxx format.
FileReftableDatabase is based on FileReftableStack, which does
compactions inline. This is simple, and has good median performance,
but every so often it will rewrite the entire ref database.
For testing, a FileReftableTest (mirroring RefUpdateTest) is added to
check for Reftable specific behavior. This must be done separately, as
reflogs have different semantics.
Add a reftable flavor of BatchRefUpdateTest.
Add a FileReftableStackTest to exercise compaction.
Add FileRepository#convertToReftable so existing testdata can be
reused.
CQ: 21007
Change-Id: I1837f268e91c6b446cb0155061727dbaccb714b8
Signed-off-by: Han-Wen Nienhuys <hanwen@google.com>
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
This avoids polluting hand-crafted user level config with
auto-configured options which might disturb in environments where
the user level config is replicated between different machines.
Add a jgit config as parent of the system level config. Persist
measured timestamp resolutions always in this jgit config and read it
via the user global config. This has the effect that auto-configured
timestamp resolution will be used by default and can be overridden in
either the system level or user level config.
Store the jgit config under the XDG_CONFIG_HOME directory following the
XDG base directory specification [1] in order to ensure that we have
write permissions to persist the file. This has the effect that each OS
user will use its jgit config since they typically use different
XDG_CONFIG_HOME directories.
If the environment variable XDG_CONFIG_HOME is defined the jgit config
file is located at $XDG_CONFIG_HOME/jgit/config otherwise the default is
~/.config/jgit/config.
If you want to avoid redundant measurement for different OS users
manually copy the values measured and auto-configured for one OS user to
the system level git config.
[1] https://wiki.archlinux.org/index.php/XDG_Base_Directory
Bug: 551850
Change-Id: I0022bd40ae62f82e5b964c2ea25822eb55d94687
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
The RepositoryState's description is shown in EGit's interactive rebase
view. Use the grammatically correct form.
Bug: 552359
Change-Id: I860ef730a67f2b34d7fabbfbda5ea65ead9270d2
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Support the core.hooksPath git config. This can be an absolute or
relative path of a directory where to find git hooks; a relative
path is resolved relative to the directory the hook will run in.
Bug: 500266
Change-Id: I671999a6386a837e897c31718583c91d8035f3ba
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
Since commit c3b0dec509fe136c5417422f31898b5a4e2d5e02, Git has
disallowed writing a non-commit to refs/heads/* refs. JGit still
allows that, which can put users in a bad situation. For example,
git push origin v1.0:master
pushes the tag object v1.0 to refs/heads/master, instead of the
intended commit object v1.0^{commit}.
Prevent that by validating that the target of the ref points to a
commit object when pushing to refs/heads/*.
Git performs the same check at a lower level (in the RefDatabase). We
could do the same here, but for now let's start conservatively by
handling it in pushes first.
[jn: fleshed out commit message]
Change-Id: I8f98ae6d8acbcd5ef7553ec732bc096cb6eb7c4e
Signed-off-by: Yunjie Li <yunjieli@google.com>
Signed-off-by: Jonathan Nieder <jrn@google.com>
It's expected that jgit should work without native git installation.
In such case Security Manager can be configured to deny access to the
files outside of git repository. JGit tries to find cygwin
installation. If Security manager restricts access to some folders
in PATH, it should be considered that those folders are absent
for jgit.
Also JGit tries to detect if symbolic links are supported by OS. If
security manager forbids creation of symlinks, it should be assumed
that symlinks aren't supported.
Bug: 550115
Change-Id: Ic4b243cada604bc1090db6cc1cfd74f0fa324b98
Signed-off-by: Nail Samatov <sanail@yandex.ru>
So far the git configuration and the system wide git configuration were
always reloaded when jgit accessed these global configuration files to
access global configuration options which are not in the context of a
single git repository. Cache these configurations in SystemReader and
only reload them if their file metadata observed using FileSnapshot
indicates a modification.
Change-Id: I092fe11a5d95f1c5799273cacfc7a415d0b7786c
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
- fix handling of interrupts in FileStoreAttributes#saveToConfig
- increase retry wait time to 100ms
- don't wait after last retry
- dont retry if failure is caused by another exception than
LockFailedException
Change-Id: I108c012717d2bcce71f2c6cb9cf0879de704ebc2
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Cache FileStoreAttributeCache entries since looking up FileStore for a
file may be expensive on some platforms.
Implement a simple LRU cache based on ConcurrentHashMap using a simple
long counter to order access to cache entries.
Change-Id: I4881fa938ad2f17712c05da857838073a2fc4ddb
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Signed-off-by: Marc Strapetz <marc.strapetz@syntevo.com>
Also-By: Marc Strapetz <marc.strapetz@syntevo.com>
This enables higher file timestamp resolution on filesystems like ext4,
Mac APFS (1ns) or NTFS (100ns) providing high timestamp resolution on
filesystem level.
Note:
- on some OSes Java 8,9 truncate milliseconds, see
https://bugs.openjdk.java.net/browse/JDK-8177809, fixed in Java 10
- UnixFileAttributes truncates timestamp resolution to microseconds when
converting the internal representation to FileTime exposed in the API,
see https://bugs.openjdk.java.net/browse/JDK-8181493
- WindowsFileAttributes also provides only microsecond resolution
Change-Id: I25ffff31a3c6f725fc345d4ddc2f26da3b88f6f2
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
To enable persisting filesystem timestamp resolution per FileStore add a
new config section to the user global git configuration:
- Config section is "filesystem"
- Config subsection is concatenation of
- Java vendor (system property "java.vm.vendor")
- runtime version (system property "java.vm.version")
- FileStore's name
- separated by '|'
e.g.
"AdoptOpenJDK|1.8.0_212-b03|/dev/disk1s1"
The prefix is needed since some Java versions do not expose the full
timestamp resolution of the underlying filesystem. This may also
depend on the underlying operating system hence concrete key values
may not be portable.
- Config key for timestamp resolution is "timestampResolution" as a time
value, supported time units are those supported by
DefaultTypedConfigGetter#getTimeUnit
If timestamp resolution is already configured for a given FileStore
the configured value is used instead of measuring the resolution.
When timestamp resolution was measured it is persisted in the user
global git configuration.
Example:
[filesystem "AdoptOpenJDK|1.8.0_212-b03|/dev/disk1s1"]
timestampResolution = 1 seconds
If locking the git config file fails retry saving the resolution up to 5
times in order to workaround races with another thread.
In order to avoid stack overflow use the fallback filesystem timestamp
resolution when loading FileBasedConfig which creates itself a
FileSnapshot to help checking if the config changed.
Note:
- on some OSes Java 8,9 truncate to milliseconds or seconds, see
https://bugs.openjdk.java.net/browse/JDK-8177809, fixed in Java 10
- UnixFileAttributes up to Java 12 truncates timestamp resolution to
microseconds when converting the internal representation to FileTime
exposed in the API, see https://bugs.openjdk.java.net/browse/JDK-8181493
- WindowsFileAttributes also provides only microsecond resolution up to
Java 12
Hence do not attempt to manually configure a higher timestamp resolution
than supported by the Java version being used at runtime.
Bug: 546891
Bug: 548188
Change-Id: Iff91b8f9e6e5e2295e1463f87c8e95edf4abbcf8
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
It was reported that measuring file timestamp resolution may hang
indefinitely on nfs. Hence timeout this measurement at the known worst
filesystem timestamp resolution (FAT) of 2 seconds.
Bug: 548188
Change-Id: I17004b0aa49d5b0e76360a008af3adb911b289c0
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
RevWalk does not currently provide a --first-parent equivalent and the
feature has been requested.
Add a field to the RevWalk class to specify whether walks should
traverse first parents only. Modify Generator implementations to support
the feature.
Change-Id: I4a9a0d5767f82141dcf6d08659d7cb77c585fae4
Signed-off-by: Dave Borowitz <dborowitz@google.com>
Signed-off-by: Alex Spradlin <alexaspradlin@google.com>
When loading the config, a FileNotFoundException may occur if the file
exists but cannot be read (see [1]). This is the case on Windows with a
virus scanner checking the file. Therefore if the file exists and that
exception is thrown, retry multiple times, similar to how this was
already implemented for IOException.
[1] https://docs.oracle.com/javase/8/docs/api/java/io/FileNotFoundException.html
Bug: 529522
Change-Id: Ic5dc3b7b24bb0005d6256ed00513bc7c0b91e613
Signed-off-by: Michael Keppler <Michael.Keppler@gmx.de>
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
We logged a stack trace if the configured http.cookieFile was missing.
Instead only log a warning.
Bug: 548081
Change-Id: I42e39f5ad8ffce7b43162e5068f60af073b8a126
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
The git config entries "http.cookieFile" and
"http.saveCookies" are correctly evaluated.
Bug: 488572
Change-Id: Icfeeea95e1a5bac3fa4438849d4ac2306d7d5562
Signed-off-by: Konrad Windszus <konrad_w@gmx.de>
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Offer a version of findBranchesReachableFrom method with progress
monitor callback. This is required to allow UI clients to cancel long
running operations and show progress.
Bug: 547642
Change-Id: I31d1de54dbaa6ffb11e03da4c447963e8defa1d0
Signed-off-by: Andrey Loskutov <loskutov@gmx.de>
One occurrence in core JGit, several in jgit.pgm. One unused
occurrence in jgit.pgm; remove it.
Change-Id: I04c3dd9d9f542f1e1ac6df4cbf03bcefb6bfdf78
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
When the packfile checksum does not match the expected one
report the correct checksum error instead of reporting that
the number of objects is incorrect.
Change-Id: I040f36dacc4152ae05453e7acbf8dfccceb46e0d
Signed-off-by: Luca Milanesio <luca.milanesio@gmail.com>
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
(cherry picked from commit 436c99ce59)
Externalize the message and log the pack file with absolute path.
Change-Id: I019052dfae8fd96ab67da08b3287d699287004cb
Signed-off-by: David Pursehouse <david.pursehouse@gmail.com>
(cherry picked from commit 9665d86ba1)
When the packfile checksum does not match the expected one
report the correct checksum error instead of reporting that
the number of objects is incorrect.
Change-Id: I040f36dacc4152ae05453e7acbf8dfccceb46e0d
Signed-off-by: Luca Milanesio <luca.milanesio@gmail.com>
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Externalize the message and log the pack file with absolute path.
Change-Id: I019052dfae8fd96ab67da08b3287d699287004cb
Signed-off-by: David Pursehouse <david.pursehouse@gmail.com>
Instead of a new "unexpectedNlinkValue" message use the already
existing "failedAtomicFileCreation". Remove a stray double quote
from the latter.
Change-Id: I1ba5e9ea48d3f7615354b2ace2575883070b3206
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
Several problems:
* The command didn't specify whether it expected short or full names.
* For the new name, it expected a short name, but then got confused
if tags or both local and remote branches with the same name existed.
* For the old name, it accepted either a short or a full name, but
again got confused if a short name was given and a tag with the
same name existed.
With such an interface, one cannot use Repository.findRef() to
reliably find the branch to rename. Use exactRef() for the new
name as by the time the Ref is needed its full name is known.
For determining the old Ref from the name, do the resolution
explicitly: first try exactRef (assuming the old name is a full
name); if that doesn't find anything, try "refs/heads/<old>" and
"refs/remotes/<old>" explicitly. Throw an exception if the name
is ambiguous, or if exactRef returned something that is not a
branch (refs/tags/... or also refs/notes/...).
Document in the javadoc what kind of names are valid, and add tests.
A user can still shoot himself in the foot if he chooses exceptionally
stupid branch names. For instance, it is still possible to rename a
branch to "refs/heads/foo" (full name "refs/heads/refs/heads/foo"),
but it cannot be renamed further using the new short name if a branch
with the full name "refs/heads/foo" exists. Similar edge cases exist
for other dumb branch names, like a branch with the short name
"refs/tags/foo". Renaming using the full name is always possible.
Bug: 542446
Change-Id: I34ac91c80c0a00c79a384d16ce1e727c550d54e9
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
This also includes a change to generating the jgit CLI jar. Shading is
no longer possible because it breaks the signature of BouncyCastle.
Instead, the Spring Boot Loader Maven plug-in is now used to generate an
executable jar.
Bug: 382212
Change-Id: I35ee3d4b06d9d479475ab2e51b29bed49661bbdc
Also-by: Gunnar Wagenknecht <gunnar@wagenknecht.org>
Signed-off-by: Gunnar Wagenknecht <gunnar@wagenknecht.org>
Signed-off-by: Medha Bhargav Prabhala <mprabhala@salesforce.com>
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
This change introduces the concept of a GpgSigner which will sign
commits. The GpgSigner will be of a specific implementation (eg.,
Bouncycastle or OpenPgP executable). The actual implementation is not
part of this change.
Bug: 382212
Change-Id: Iea5da1e885c039e06bc8d679d46b124cbe504c8e
Also-by: Medha Bhargav Prabhala <mprabhala@salesforce.com>
Signed-off-by: Medha Bhargav Prabhala <mprabhala@salesforce.com>
Signed-off-by: Gunnar Wagenknecht <gunnar@wagenknecht.org>
When a server sends a ref advertisement using protocol v2 it contains
lines other than ref names and sha1s. Attempting to get the sha1 out
of such a line using the substring method can result in a SIOOB error
when it doesn't actually contain the sha1 and ref name.
Add a check that the line is of the expected length, and subsequently
that the extracted object id is valid, and if not throw an exception.
Change-Id: Id92fe66ff8b6deb2cf987d81929f8d0602c399f4
Signed-off-by: David Pursehouse <david.pursehouse@gmail.com>
Do not add an artificial line break to the message, since it may become
much wider due to the embedded exception messages anyway.
The layout shall be controlled by the egit supplied message dialog using
layout constraints.
Bug: 540537
Change-Id: I4257b52e5e59689dfcbab47bd7c075b3fd031837
Signed-off-by: Michael Keppler <Michael.Keppler@gmx.de>
The only reference to this externalized text was deleted in c88d34b0.
Change-Id: Iecc7cc89192d69431dddb6550a02f66f0b09accc
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
In C Git, when a client fetches with "git fetch --shallow-since=<date>
origin <ref>", and all commits reachable from <ref> are older than
<date>, the server dies with a message "no commits selected for shallow
requests". That is, (1) the --shallow-since filter applies to the commit
pointed to by the ref itself, and (2) there is a check that at least one
commit is not filtered out. (The pack-protocol.txt documentation does
not describe this, but the C implementation does this.)
The implementation in commit 1bb430dc21 ("UploadPack: support
deepen-since in protocol v2", 2018-09-27) does neither (1) nor (2), so
do both of these.
Change-Id: I9946327a71627626ecce34ca2d017d2add8867fc
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Alex Spradlin
Michael Dardis
David Pursehouse
Emmanuel Hugonnet
Thomas Wolf
Matthias Sohn
Han-Wen Nienhuys
Yunjie Li
Nail Samatov
Dave Borowitz
Michael Keppler
Konrad Windszus
Andrey Loskutov
Luca Milanesio
Medha Bhargav Prabhala
Gunnar Wagenknecht
Jonathan Tan