If CheckStat is MINIMAL or timestamps have no nanosecond part
WorkingTreeIterator.compareMetaData only checks the second part of
timestamps and ignores nanoseconds which may have ended up in the index
by using native git.
If
fileLastModified.getEpochSecond() == cacheLastModified.getEpochSecond()
we currently proceed comparing fileLastModified and cacheLastModified
with full precision which is wrong since we determined that we detected
reduced timestamp resolution.
Fix this and also handle smudged index entries for CheckStat.MINIMAL.
Change-Id: I6149885903ac63d79b42d234cc02aa4e19578f3c
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
We don't need to update time atomically since it's only used to order
cache entries in LRU order.
Change-Id: I756fa6d90b180c519bf52925f134763744f2c1f1
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Since commit c3b0dec509fe136c5417422f31898b5a4e2d5e02, Git has
disallowed writing a non-commit to refs/heads/* refs. JGit still
allows that, which can put users in a bad situation. For example,
git push origin v1.0:master
pushes the tag object v1.0 to refs/heads/master, instead of the
intended commit object v1.0^{commit}.
Prevent that by validating that the target of the ref points to a
commit object when pushing to refs/heads/*.
Git performs the same check at a lower level (in the RefDatabase). We
could do the same here, but for now let's start conservatively by
handling it in pushes first.
[jn: fleshed out commit message]
Change-Id: I8f98ae6d8acbcd5ef7553ec732bc096cb6eb7c4e
Signed-off-by: Yunjie Li <yunjieli@google.com>
Signed-off-by: Jonathan Nieder <jrn@google.com>
PackedBatchRefUpdate was creating a new packed-refs list that was
potentially unsorted. This would be papered over when the list was
read back from disk in parsePackedRef, which detects unsorted ref
lists on reading, and sorts them. However, the BatchRefUpdate also
installed the new (unsorted) list in-memory in
RefDirectory#packedRefs.
With the timestamp granularity code committed to stable-5.1, we can
more often accurately decide that the packed-refs file is clean, and
will return the erroneous unsorted data more often. Unluckily timed
delays also cause the file to be clean, hence this problem was
exacerbated under load.
The symptom is that refs added by a BatchRefUpdate would stop being
visible directly after they were added. In particular, the Gerrit
integration tests uses BatchRefUpdate in its setup for creating the
Admin group, and then tries to read it out directly afterward.
The tests recreates one failure case. A better approach would be to
revise RefList.Builder, so it detects out-of-order lists and
automatically sorts them.
Fixes https://bugs.eclipse.org/bugs/show_bug.cgi?id=548716 and
https://bugs.chromium.org/p/gerrit/issues/detail?id=11373.
Bug: 548716
Change-Id: I613c8059964513ce2370543620725b540b3cb6d1
Signed-off-by: Han-Wen Nienhuys <hanwen@google.com>
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Add the constant, and implement hashing of known host names in
OpenSshServerKeyDatabase. Add a test verifying that the hashing
works.
Bug: 548492
Change-Id: Iabe82b666da627bd7f4d82519a366d166aa9ddd4
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
Move the handling of cached user and system config to getSystemConfig
and getUserConfig methods and revert the implementation of
openSystemConfig and openUserConfig to the old stateless
implementation.
This ensures the open methods respect the passed-in parent config, which
may be different on each invocation. Additionally, returning a new
instance matches the behavior of the previous implementation of the
default system reader, which downstream callers may be depending on.
Move the implementation of the new caching methods getSystemConfig and
getUserConfig up to SystemReader. This avoids that we break the ABI for
subclasses of SystemReader.
Also see [1] which fixed a similar problem with Gerrit's custom
SystemReader.
[1] https://gerrit-review.googlesource.com/c/gerrit/+/225458
Change-Id: If54a2491932d8fc914d4649cb73c9e837c5b8ad0
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
These warnings were missed to address in a0048208 which introduced them.
Change-Id: Ia2d15fdce72c10378d020682b80fe7fc548c0d4c
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
In order to support implementations of CachedPackUriProvider (which need
to supply, among other things, the checksum of the packfile
corresponding to a CachedPack), in a004820858 ("UploadPack: support
custom packfile-to-URI mapping", 2019-08-20), the method getCheckSum()
was added to PackIndex. However, there is no way to access the PackIndex
from a DfsCachedPack.
Therefore, add an accessor for the DfsPackFile stored in the
DfsCachedPack. Now, a user who has a DfsCachedPack can use
DfsCachedPack#getPackFile then DfsPackFile#getPackIndex then
PackIndex#getCheckSum to obtain the checksum of a pack.
Change-Id: Ia010c016f6cac0f058ee20eff4c10f57338bfefc
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
When firstParent is set, RevWalk traverses only the first parent of a
commit, even though that commit is UNINTERESTING. Since we want the
maximal UNINTERESTING set, we shouldn't prune any parents here. This
issue is apparent only when some of the commits being traversed are
unparsed, since walker.carryFlagsImpl() propagates the UNINTERESTING
flag to all parsed ancestors, masking the issue.
Therefore teach RevWalk to traverse all parents when a commit is
UNINTERESTING and not only the first parent. Since this issue is
masked by commit parsing, also test situations when the commits
involved are unparsed.
Signed-off-by: Alex Spradlin <alexaspradlin@google.com>
Change-Id: I95e2ad9ae8f1f50fbecae674367ee7e0855519b1
It's expected that jgit should work without native git installation.
In such case Security Manager can be configured to deny access to the
files outside of git repository. JGit tries to find cygwin
installation. If Security manager restricts access to some folders
in PATH, it should be considered that those folders are absent
for jgit.
Also JGit tries to detect if symbolic links are supported by OS. If
security manager forbids creation of symlinks, it should be assumed
that symlinks aren't supported.
Bug: 550115
Change-Id: Ic4b243cada604bc1090db6cc1cfd74f0fa324b98
Signed-off-by: Nail Samatov <sanail@yandex.ru>
This ensures that only one instance of user and one instance of system
config is set.
Change-Id: Idd00150f91d2d40af79499dd7bf8ad5940f87c4e
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
deleteChildren was called on directory instead of gitDir, leading to a
potential null pointer exception if the git directory existed initially.
Bug: 550340
Change-Id: Iafc3b2961253a99862a59e81c7371f7bc564b412
Signed-off-by: Adrien Bustany <adrien-xx-eclipse@bustany.org>
The merge done in change If0c5010a2 resolved a conflict incorrectly
and reverted the fix that was done in change Id0bcdc93b.
Change-Id: I0f5fde33d1f366817f2b966eb42535f7bd3b063e
Reported-by: Thomas Wolf <thomas.wolf@paranor.ch>
Signed-off-by: David Pursehouse <david.pursehouse@gmail.com>
Ensure we use the same type when comparing seconds since the epoch.
This does not prevent that in 2038 timestamps in seconds since the epoch
stored in a 32 bit integer will overflow. Integer.MAX_VALUE translates
to 2038-01-19T03:14:07Z. After this date we'll have an issue since we
store seconds since the epoch in a 32 bit integer in some places.
Bug: 319142
Change-Id: If0c03003d40b480f044686e2f7a2f62c9f4e2fe1
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Replace the two int variables smudge_s and smudge_ns by an Instant and
use the new method DirCacheEntry.mightBeRacilyClean(Instant).
Change-Id: Id70adbb0856a64909617acf65da1bae8e2ae934a
Signed-off-by: Michael Keppler <Michael.Keppler@gmx.de>
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Teach UploadPack to take a provider of URIs corresponding to cached
packs. When fetching, if the client supports the packfile-uri feature,
and if such a cached pack were to be streamed, instead send the
corresponding URI.
This packfile-uri feature is implemented in the jt/fetch-cdn-offload
branch of Git. There is interest in this feature [1], but it is not yet
merged.
[1] https://public-inbox.org/git/cover.1552073690.git.jonathantanmy@google.com/
Change-Id: I9a32dae131c9c56ad2ff4a8a9638ae3b5e44dc15
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Previously, the API did not enforce ordering of writes. Misuse of
this API would lead to data effectively being lost.
Guard against that with IllegalArgumentException, and add a test.
Change-Id: I04f55c481d60532fc64d35fa32c47037a03988ae
Signed-off-by: Han-Wen Nienhuys <hanwen@google.com>