If the IndexDiffFilter is asked whether it should include or filter out
a certain path and for that path there is a dircache entry with a stage
different from 0, then the filter should never filter out this entry.
IndexDiffFilter is an optimized version of AnyDiffFilter and there is no
case where the index contains non-0 stages but we still don't see any
diff for that path.
Change-Id: I25915880f304090fe90584c79bddf021231227a2
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
In change If45bc3d078b3d3de87b758e71d7379059d709603 a new parameter was
added to 3 protected methods of ResolveMerger. This breaks the code of
developers which have subclassed ResolveMerger. The API baseline check
in Eclipse reports this as API breakage.
Since this will break only providers but not consumers of the API this
should be allowed also in minor versions. According to OSGi semantic
versioning
http://www.osgi.org/wiki/uploads/Links/SemanticVersioning.pdf
breaking providers in a minor version update is ok.
Therefore silence these errors using API filter rules.
Bug: 440757
Change-Id: Icabbd0e1de7e877c66a5c4a2c8391473f992a1aa
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
It's an internal package which isn't part of the API. Mark it x-internal
to silence @since tag warnings which are only raised for new API.
Bug: 440757
Change-Id: Id05deaca43f135cd1bfe83cf1f29787cbbdbecac
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
The fix is to move the new head commit to the newly-created revert
commit, so that additional revert commits will use the correct head.
Change-Id: I5de3a9a2a4c276e60af732e9c507cbbdfd1a4652
Signed-off-by: Maik Schreiber <blizzy@blizzy.de>
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Apparently repo allows projects overlapping, e.g. one project's path is "foo"
and another project's path is "foo/bar". This is not supported in git submodule.
At JGit repo side we'll skip all the submodules that are in subdirectories of
other submodules, and on repo side we'll make them submodules to resolve this
problem.
Change-Id: I6820c4ef400c530a36150b1228706adfcc43ef64
Signed-off-by: Yuxuan 'fishy' Wang <fishywang@google.com>
Previously when RecursiveMerger was trying to create a single virtual
common base for the merge it was failing when this lead to content-merge
conflicts. This is different from what native git is doing. When native
git's recursive merge algorithm creates a new common base it will merge
the multiple parents and simply take the merge result (potentially
including conflict markers) as common base. See my discussion with Shawn
here: http://www.spinics.net/lists/git/msg234959.html :
> - How should workingtree, index (stage1,2,3) look like if during
that
> merge of common ancestors a conflict occurs? Will I see in stage2
and
> stage3 really see content of X1 and X2?
Its done entirely in memory and never touches the working tree or
index. When a conflict exists in the X1-X2 merge the conflict is
preserved into the new virtual base.
There is still the possibility that the merge of parents lead to
conflicts. File/Folder conclicts, conflicts on filemodes. This commit
only fixes the situation for conflicts when merging content.
Bug: 438203
Change-Id: If45bc3d078b3d3de87b758e71d7379059d709603
During recursive merge jgit potentially has to merge multiple
common ancestors. If this fails because there are conflicts then
the exception thrown for that should have a message which states
this clearly. Previously a wrong message was given ("More than 200
merge bases ...")
Change-Id: Ia3c058d5575decdefd50390ed83b63668d31c1d1
Each time the longest common substring is found the diff algorithm
recurses to reprocess the regions before and after the common string.
Large files with many edits can trigger StackOverflowError as the
algorithm attempts to process a deeply split tree of regions. This
is especially prone to happen in servers where the Java stack size
may have been limited to 1M or even 256K.
To keep edits produced in order a queue is used to process edits
in a depth-first strategy.
Change-Id: Iae7260c6934efdffac7c7bee4d3633a8208924f7
When RecursiveMerger tried to determine a common base tree it was
recursively tried to merge multiple common bases. But these intermediate
merges which have just been done to determine a single common base for
the final merge already filled some important fields (toBeCheckedOut,
toBeDeleted, ...). These side effects of the intermediate merges led to
wrong results of the final merge. One symptom was that after a recursive
merge which should be succesful you could still see leftover files in
the worktree: files which existed in the (virtual) common base but which
don't exist anymore in the branches to be merged.
The solution is easy: Clear the appropriate fields after common base
determination and start the final merge with a clean state.
Change-Id: I644ea9e1cb15360f7901bc0483cdb9286308c226
Signed-off-by: Robin Rosenberg <robin.rosenberg@dewire.com>
As described in native gits file "git-read-tree.txt" git has in a
special mode when doing the "initial" checkout. "Initial" means that the
index is empty before the checkout. This was not handled correctly in
JGit and is fixed in this commit. Also see
https://github.com/git/git/blob/master/Documentation/git-read-tree.txt#L181
Change-Id: I9b9d1bd9ebf349cfca420c891c7b099a18d07ba4
Setting branch.<name>.rebase or pull.rebase to 'preserve' will preserve
merges during rebase. Also, pull.rebase is now consulted if there is no
branch-specific configuration.
Bug: 429664
Change-Id: I345fa295c7e774e0d0a8e6aba30fbfc3552e0084
Signed-off-by: Konrad Kügler <swamblumat-eclipsebugs@yahoo.de>
With --preserve-merges C Git re-does merges using the rewritten merge
parents, discarding the old merge commit. For the common use-case of
pull with rebase this is unfortunate, as it loses the merge conflict
resolution (and other fixes in the merge), which may have taken quite
some time to get right in the first place.
To overcome this we use a two-fold approach:
If any of the (non-first) merge parents of a merge were rewritten, we
also redo the merge, to include the (potential) new changes in those
commits.
If only the first parent was rewritten, i.e. we are merging a branch
that is otherwise unaffected by the rebase, we instead cherry-pick the
merge commit at hand. This is done with the --mainline 1 and --no-commit
options to apply the changes introduced by the merge. Then we set up an
appropriate MERGE_HEAD and commit the result, thus effectively forging a
merge.
Apart from the approach taken to rebase merge commits, this
implementation closely follows C Git. As a result, both Git
implementations can continue rebases of each other.
Preserving merges works for both interactive and non-interactive rebase,
but as in C Git it is easy do get undesired outcomes with interactive
rebase.
CommitCommand supports committing merges during rebase now.
Bug: 439421
Change-Id: I4cf69b9d4ec6109d130ab8e3f42fcbdac25a13b2
Signed-off-by: Konrad Kügler <swamblumat-eclipsebugs@yahoo.de>
Allows to pass for example a List<RevCommit>.
Change-Id: I5522707060d7d3e0d848ba579956dc62f8fa0234
Signed-off-by: Konrad Kügler <swamblumat-eclipsebugs@yahoo.de>
DiffFormatter now suports either side being null and the log program
will output the diff for the first commit.
Bug: 395791
Change-Id: I378957b57e9ad1f7195ba416f402178453f0ebd3
Making the methods static would gain little in performance,
make the code harder to change. Removing unncessary warnings
is more important.
Change-Id: If3e6aa9c1d92e58b4e7a8e246cf4aace237d7a7b
These settings were added by Eclipse simply by touching
the project settings. Adding these makes it simpler to see
what local changes have been made.
Change-Id: Iab0aa62530312eb0c78b03b5c6a632742bcc4978
{} is plain wrong and is not accepted by MessageFormat, the other risk
becoming wrong if another single quote is introduced in the future and
sets a bad example.
Bug: 438261
Change-Id: I2948ca90c10f6ec2574f7f2b9be0a72821ea4daf
Connecting to an SshSession may fail due to different reasons. Jsch for
example often throws an com.jcraft.jsch.JschException: verify: false.[1]
The issue is still not fixed in JSch 0.1.51.
In such a case it is worth retrying to connect. The number of connection
attempts can be configured using ssh_config parameter
"ConnectionAttempts" [2].
Don't retry if the user canceled authentication.
[1] http://sourceforge.net/p/jsch/bugs/58/
[2] http://linux.die.net/man/5/ssh_config
Bug: 437656
Change-Id: I6dd2a3786b7d3f15f5a46821d8edac987a57e381
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
The current behavior of passing a TreeFilter to RevWalk has limited
usefulness, since the RevFilter derived from the TreeFilter is always
ANDed together with any other RevFilters. It is also tied fairly
tightly to the parent rewriting mechanism.
Make TreeRevFilter a generic RevFilter that matches modified paths
against any TreeFilter. This allows for more complex logic like
(modified this path OR authored by this person).
Leave the rewrite flag logic in this class, since it's closely tied to
the parent comparison code, but hidden behind a protected constructor.
Change-Id: Ia72ef591a99415e6f340c5f64583a49c91f1b82f
Sometimes an input stream is more useful than the filename of the xml manifest.
Change-Id: Icb09ac751b3d8d7eb14427ad1aac8cee0c371c5f
Signed-off-by: Yuxuan 'fishy' Wang <fishywang@google.com>
DeltaTask$Block.partitionTask was doing an infinite loop if number of
threads was greater than the totalWeight. The weightPerThread was 0
which was causing the infinite loop. Set the weightPerThread to a
minimal value of one.
Bug: 420915
Change-Id: Ia8e3ad956d53d8193937b7fa1bc19aafde9767ff
Signed-off-by: Hugo Arès <hugo.ares@ericsson.com>
Originally, blame's walk to find a scapegoat to blame for a file
walking backward from a commit used the test
treeWalk.getFileMode(0).getObjectType() != OBJ_BLOB
to throw out gitlink (submodule) entries. Later, 52500d3264 (blame:
Micro optimize blob lookup in tree, 2014-04-17) changed that test to
(treeWalk.getRawMode(0) & TYPE_FILE) != TYPE_FILE
These checks are not the same, though: the older test accepts files
and symlinks, while the newer one accepts files, symlinks, and gitlink
(submodule) entries. This is particularly broken in the submodule
case --- trying to parse the referred-to commit as a blob produces
caught an exception: GET /gerrit/+blame/master/plugins/reviewnotes HTTP/1.1
org.eclipse.jgit.errors.MissingObjectException: Missing blob 61702414c046dd6b811c9137b765f9db422f83db
Stick to just (possibly executable) files instead. Symlinks are not
line-oriented data so blame on a symlink is not likely to be useful.
A quick grep for '& TYPE_' doesn't find any other instances of this
bug.
Change-Id: Iebcc91f1bee3c91adda51dccd6372e8302bf23fe
Signed-off-by: Jonathan Nieder <jrn@google.com>
Christian Halstrick
Robin Stocker
Matthias Sohn
Andrey Loskutov
Maik Schreiber
Yuxuan 'fishy' Wang
Shawn Pearce
Konrad Kügler
Robin Rosenberg
Stefan Lay
Dave Borowitz
Anton Bannykh
Hugo Arès
Jonathan Nieder