Instead of hiding this logic inside of DirCacheTree and the legacy
Tree type, pull it into a common place where we can reuse it by
creating tree records in a buffer that can be passed directly into
the ObjectInserter. This allows us to avoid some copying, as the
inserter can be given the internal buffer of the formatter.
Because we trust these two callers to feed us records in the proper
order, without '/' in the names, and without duplicate names in the
same tree, we don't do any validation inside of the formatter itself.
To protect themselves from making ordering errors, developers should
continue to use DirCache to process edits to source code trees.
Change-Id: Idf7f10e736d4a44ccdf8afe060535d7b0554a92f
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
When adding a new method near the end of the sequence we want to
show the full method inserted, and not tear the prior method due
to the common trailing curly brace being consumed as part of the
common end region of the sequences.
Bug: 328895
Change-Id: I233bc40445fb5452863f5fb082bc3097433a8da6
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
This test isn't that useful. The better way to evaluate diff
algorithm performance is to run `jgit debug-diff-algorithms` over
real-world repositories, such as linux-2.6.git. Whenever we modify
an algorithm we should manually verify that its runtime performance
doesn't get any worse than it already is.
Change-Id: I0beed3a5a8a537c958a5a6438a1283f97fa2097a
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
HistogramDiff failed on cases where the initial element for the LCS
was actually very common (e.g. has 20 occurrences), and the first
element of the inserted region after the LCS was also common but
had fewer occurrences (e.g. 10), while the LCS also contained a
unique element (1 occurrence).
This happens often in Java source code. The initial element for
the LCS might be the empty line ("\n"), and the inserted but common
element might be "\t/**\n", with the LCS being a large span of
lines that contains unique method declarations. Even though "/**"
occurs less often than the empty line its not a better LCS if the
LCS we already have contains a unique element.
The logic in HistogramDiff would normally have worked fine, except I
tried to optimize scanning of B by making tryLongestCommonSequence
return the end of the region when there are matching elements
found in A. This allows us to skip over the current LCS region,
as it has already been examined, but caused us to fail to identify
an element that had a lower occurrence count within the region.
The solution used here is to trade space-for-time by keeping a
table of A positions to their occurrence counts. This allows the
matching logic to always use the smallest count for this region,
even if the smallest count doesn't appear on the initial element.
The new unit test testEdit_LcsContainsUnique() verifies this new
behavior works as expected.
Bug: 328895
Change-Id: Id170783b891f645b6a8cf6f133c6682b8de40aaf
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Fixes the "Method ignores results of InputStream.read()" warning.
This is the only place where read() was used instead of readFully()
and the return value was not checked. So it was either an oversight
or should be documented. This change assumes it was an oversight.
Change-Id: I859404a7d80449c538a552427787f3e57d7c92b4
The value was accessed every time in the loop body with get(),
so use the more efficient entrySet().
Change-Id: I91d90cbd0b0d03ca4a3db986c58b8d80d80f40a4
This was already disabled in the Eclipse preferences for the project.
With this, Hudson should also ignore it.
Change-Id: I7a6b9a20451dc5ba9a61553248b5f4b6c6c7a78b
As described in Bug 328551 there was a bug that the merge algorithm
was not always reporting conflicts when the same line was deleted
and modified. This problem was introduced during commit
0c017188b4 when reported conflicts have
been checked for common pre- and suffixes.
This was fixed here by better determining whether after stripping
off common prefixes and suffixes from a conflicting region there
is still some conflicting part left.
I also added a unit test to test this situation.
Bug: 328551
Change-Id: Iec6c9055d00e5049938484a27ab98dda2577afc4
Signed-off-by: Christian Halstrick <christian.halstrick@sap.com>
When creating a local branch based on another local branch, the
upstream configuration contains "." as origin and the source branch
as "merge". The PullCommand should support this by skipping the
fetch step altogether and use the base branch to merge with.
Change-Id: I260a1771aeeffca5b0161d1494fd63c672ecc2a6
Signed-off-by: Mathias Kinzler <mathias.kinzler@sap.com>
AmbiguousObjectException contains an AbbreviatedObjectId and is
supposed to be serializable, so it should be serializable as well.
Change-Id: I8056e78aee20fdd3cb9600b52cd8ed988544293d
It's probably not possible that these numbers are negative in the
algorithm, but it's cleaner this way and gets rid of three more
FindBugs warnings.
Change-Id: Ifbce4e2c787fb9a7cd309c605e8d86211ef8a352
Don't permit transient worker threads to access the underlying output
stream of a ProgressMonitor, as they might get marked as the stream's
writer thread. Instead proxy update events from the workers back onto
the application's real work thread. This ensures that the stream only
sees a single thread, and its the thread that will remain alive for
the entire life cycle of the operation.
This fixes IOException("Write end dead") during local repository fetch
when threaded delta search is enabled. One of the transient delta
search threads became the designated writer for the pipe, and when it
terminated the reader end thought the writer was dead, even though the
main writer thread was still executing in PackWriter.
Bug: 326557
Change-Id: I01d1b20a3d7be1c0b480c7fb5c9773c161fe5c15
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
RefsDirectory fires a RefsChangedEvent when it detect that one
ref changed (new, modified, deleted). But there was a potential
of wrong events beeing fired leading to a endless loop in EGit.
Problem is that when calling getRefs(ALL) we don't want to report
additional refs and by that we remove the additional refs from
the list of "refs reported upwards last time". We fire an
RefsChangedEvent because we think that the special refs are not
there anymore.
I fixed this by removing eventing for the additional refs. Another
alternative would be to always scan also for additional refs and
put them in the list of refs. But getRefs(ALL) would then remove
the additional refs again. I didn't do that for performance reasons
and also because I am not sure whether we want evnting for
additional refs.
Change-Id: Icb9398b55a8c6bbf03e38f6670feb67754ce91e0
Signed-off-by: Christian Halstrick <christian.halstrick@sap.com>
When checking out a tree, files that are identical to the file in
the current index and working directory don't need to be updated.
Change-Id: I9e025a53facd42410796eae821baaeff684a25c5
Signed-off-by: Chris Aniszczyk <caniszczyk@gmail.com>
The diff command in the pgm package was enhanced to allow
choosing the diff algorithm (currently myers or histogram)
Change-Id: I72083e78fb5c92868eb5d8ec512277d212a39349
Signed-off-by: Christian Halstrick <christian.halstrick@sap.com>
IndexDiff now allows to set an additional filter. This can be used
e.g. for restricting the tree walk to a given set of files.
Change-Id: I642de17e74b997fa0c5878c90631f6640ed70bdd
Signed-off-by: Jens Baumgart <jens.baumgart@sap.com>
The RefDirectory class was not returning FETCH_HEAD and
MERGE_HEAD when trying to get all refs via getRefs(RefDatabase.ALL).
This fix adds constants for FETCH_HEAD and ORIG_HEAD and adds a
new getter getAdditionalRefs() to get these additional refs.
To be compatible with c git the getRefs(ALL) method will not return
FETCH_HEAD, MERGE_HEAD and ORIG_HEAD.
Change-Id: Ie114ca92e9d5e7d61d892f4413ade65acdc08c32
Signed-off-by: Christian Halstrick <christian.halstrick@sap.com>
We need to use findbugs-maven-plugin:2.3.2-SNAPSHOT
since otherwise build fails with maven-3.0 [1], [2].
We should switch to the release version as soon
as this becomes available.
[1] http://www.sonatype.com/people/2010/10/maven-3-0-has-landed/
[2] http://jira.codehaus.org/browse/MFINDBUGS-122
Bug: 327799
Change-Id: I1c57f81cf6f0450e56411881488c4ee754e458e3
Signed-off-by: Chris Aniszczyk <caniszczyk@gmail.com>
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
If an object hasn't been accessed yet the pack list for a repository
may not have been scanned from disk. If an application (e.g. the dumb
transport servlet support code) asks for the pack list for an
ObjectDirectory, we should load it immediately.
Change-Id: I93d7b1bca422d905948e8e83b2afa83c8894a68b
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
If an ObjectInserter is created from a CachedObjectDirectory, we need
to ensure the cache is updated whenever a new loose object is actually
added to the loose objects directory, otherwise a future read from an
ObjectReader on the CachedObjectDirectory might not be able to open
the newly created object.
We mostly had the infrastructure in place to implement this due to the
injection of unpacked large deltas, but we didn't have a way to pass
the ObjectId from ObjectDirectoryInserter to CachedObjectDirectory,
because the inserter was using the underlying ObjectDirectory and not
the CachedObjectDirectory. Redirecting to CachedObjectDirectory
ensures the cache is updated.
Change-Id: I1f7bdfacc7ad77ebdb885f655e549cc570652225
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
These messages may need to change depending on the current
thread's configured locale, and thus cannot be static.
Change-Id: I96751a63852ec9c4bf6c47edadcf8752700543df
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
There was a chance that we hit a NPE which doing a checkout
with DirCacheCheckout when there is no HEAD (e.g. initial
checkout). This is fixed here.
Change-Id: Ie3b8cae21dcd90ba8352823ea94a700f8ee9221a
Signed-off-by: Christian Halstrick <christian.halstrick@sap.com>
3rd party packages that use repository types other than FileRepository
may wish to extend our pgm package and implement their own resolution
scheme for repository "names" that are passed in by the --git-dir
command line option. Make that possible by allowing the package to
extend the Main class and override the lookup.
This is primarily useful when developing new storage implementations
and trying to experiment with the results, without linking all of it
into the core JGit package.
Change-Id: Id30e168da16341e5da43365688a63aa30c7b7e2c
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Implemented the initial version of a cherry-pick command.
A correct error handling is missing (what happens if the
checkout fails, the cherry-pick leads to conflicts etc).
But straightforward cherry-picks works.
Change-Id: I235c0eb3a7a2d5bdfe40400f1deed06f29d746e1
Signed-off-by: Christian Halstrick <christian.halstrick@sap.com>
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Shawn O. Pearce
Robin Stocker
Christian Halstrick
Mathias Kinzler
Lluis Sanchez
Christian Halstrick
Jens Baumgart
Matthias Sohn
Chris Aniszczyk