* stable-4.6:
Update Jetty to 9.4.1.v20170120 in buck build
Update Jetty to 9.4.1.v20170120
Update build to use Tycho 1.0.0
Update minimum JDK version in README
Change-Id: I735697c112094e883986ce13026d967291d88494
Signed-off-by: David Pursehouse <david.pursehouse@gmail.com>
5e8e2179b2 (Update Jetty to
9.4.1.v201470120, 2017-01-26) updated Jetty in the maven build.
Update the buck build to match so buck builds work again.
The buck build will go away soon, but in the meantime (until the bazel
build gets the same level of support) it is convenient as a faster way
of running tests than using maven.
The bazel build doesn't need this change since it doesn't build or run
http tests yet.
Change-Id: Ibbdaf2880e76b32fc9f6b5605a2ff29e3deffda2
(cherry picked from commit 2470f01d0f)
MappedLoginService is no longer available in Jetty 9.4 therefore base
TestLoginService on AbstractLoginService.
Apparently Jetty now uses slf4j hence adapt RecordingLogger accordingly
so we can log error messages containing slf4j style formatting anchors
"{}".
Change-Id: Ibb36aba8782882936849b6102001a88b699bb65c
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
(cherry picked from commit 5e8e2179b2)
Extend FetchCommand to expose a new method, setRecurseSubmodules(mode),
which allows to set the mode to ON, OFF or ON_DEMAND.
After fetching a repository, its submodules are recursively fetched:
- When the mode is YES, submodules are always fetched.
- When the mode is NO, submodules are not fetched.
- When the mode is ON_DEMAND, submodules are only fetched when the
parent repository receives an update of the submodule and the new
revision is not already in the submodule.
The mode is determined in the following order of precedence:
- Value specified in the API call using setRecurseSubmodules.
- Value specified in the repository's config under the key
submodule.name.fetchRecurseSubmodules
- Defaults to ON_DEMAND if neither of the previous is set.
Extend FetchResult to recursively include results for submodules, as
a map of the submodule path to an instance of FetchResult.
Test setup is based on testCloneRepositoryWithNestedSubmodules.
Change-Id: Ibc841683763307cb76e78e142e0da5b11b1add2a
Signed-off-by: David Pursehouse <david.pursehouse@gmail.com>
This operation was added recently with the goal to provide some
way to auto-correct invalid user input, or to provide a correction
suggestion to the user -- EGit uses it now that way. But the initial
implementation was very restrictive; it removed all non-ASCII
characters and even slashes.
Understandably end users were not happy with that. Git has no such
restriction to ASCII-only; nor does JGit. Branch names should be
meaningful to the end user, and if a user-supplied branch name is
invalid for technical reasons, a "normalized" name should still
be meaningful to the user.
Rewrite to attempt a minimal fix such that the result will pass
isValidRefName.
* Replace all Unicode whitespace by underscore.
* Replace troublesome special characters by dash.
* Collapse sequences of underscores, dots, and dashes.
* Remove underscores, dots, and dashes following slashes, and
collapse sequences of slashes.
* Strip leading and trailing sequences of slashes, dots, dashes,
and underscores.
* Avoid the ".lock" extension.
* Avoid the Windows reserved device names.
* If input name is null return an empty String so callers don't need to
check for null.
This still allows branch names with single slashes as separators
between components, avoids some pitfalls that isValidRefName() tests
for, and leaves other character untouched and thus allows non-ASCII
branch names.
Also move the function from the bottom of the file up to where
isValidRefName is implemented.
Bug: 512508
Change-Id: Ia0576d9b2489162208c05e51c6d54e9f0c88c3a7
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Update SHA1 class to include a Java port of sha1dc[1]'s ubc_check,
which can detect the attack pattern used by the SHAttered[2] authors.
Given the shattered example files that have the same SHA-1, this
modified implementation can identify there is risk of collision given
only one file in the pair:
$ jgit ...
[main] WARN org.eclipse.jgit.util.sha1.SHA1 - SHA-1 collision 38762cf7f55934b34d179ae6a4c80cadccbb7f0a
When JGit detects probability of a collision the SHA1 class now warns
on the logger, reporting the object's SHA-1 hash, and then throws a
Sha1CollisionException to the caller.
From the paper[3] by Marc Stevens, the probability of a false positive
identification of a collision is about 14 * 2^(-160), sufficiently low
enough for any detected collision to likely be a real collision.
git-core[4] may adopt sha1dc before the system migrates to an entirely
new hash function. This commit enables JGit to remain compatible with
that move to sha1dc, and help protect users by warning if similar
attacks as SHAttered are identified.
Performance declined about 8% (detection off), now:
MessageDigest 238.41 MiB/s
MessageDigest 244.52 MiB/s
MessageDigest 244.06 MiB/s
MessageDigest 242.58 MiB/s
SHA1 216.77 MiB/s (was ~240.83 MiB/s)
SHA1 220.98 MiB/s
SHA1 221.76 MiB/s
SHA1 221.34 MiB/s
This decline in throughput is attributed to the step loop unrolling in
compress(), which was necessary to easily fit the UbcCheck logic into
the hash function. Using helper functions s1-s4 reduces the code
explosion, providing acceptable throughput.
With detection enabled (default):
SHA1 detectCollision 180.12 MiB/s
SHA1 detectCollision 181.59 MiB/s
SHA1 detectCollision 181.64 MiB/s
SHA1 detectCollision 182.24 MiB/s
sha1dc (native C) ~206.28 MiB/s
sha1dc (native C) ~204.47 MiB/s
sha1dc (native C) ~203.74 MiB/s
Average time across 100,000 calls to hash 4100 bytes (such as a commit
or tree) for the various algorithms available to JGit also shows SHA1
is slower than MessageDigest, but by an acceptable margin:
MessageDigest 17 usec
SHA1 18 usec
SHA1 detectCollision 22 usec
Time to index-pack for git.git (217982 objects, 69 MiB) has increased:
MessageDigest SHA1 w/ detectCollision
------------- -----------------------
20.12s 25.25s
19.87s 25.48s
20.04s 25.26s
avg 20.01s 25.33s +26%
Being implemented in Java with these additional safety checks is
clearly a penalty, but throughput is still acceptable given the
increased security against object name collisions.
[1] https://github.com/cr-marcstevens/sha1collisiondetection
[2] https://shattered.it/
[3] https://marc-stevens.nl/research/papers/C13-S.pdf
[4] https://public-inbox.org/git/20170223230621.43anex65ndoqbgnf@sigill.intra.peff.net/
Change-Id: I9fe4c6d8fc5e5a661af72cd3246c9e67b1b9fee6
The TreeWalk filtering classes need to support the three different
meanings of the return value the path comparison generates.
A new path comparison method (isPathMatch) is created with
three distinct return values (isPathPrefix use value '0' to
encode two of these) which will makes it possible for the logical
operators (especially NOT) to aggregate a correct verdict.
A filter like: AND(Path("path"), NOT(Path("path/to/other")))
Should filter out 'path/to/other/file', but not 'path/to/my/file'.
The path-limiting feature when testing path/to/my/file, would
result to run test for the following paths:
path
path/to
path/to/my
path/to/my/file
isPathPrefix('path/to/other') will return '0' for the first two
and since there is no way for NOT to distinguish between an exact
match and a match indicating that the tested path is a 'parent',
it will incorrectly return false and thus remove everything below
'path' immediately.
isPathMatch has a distinguished value for 'parent' matches that
will be preserved through the logic operators and should not
cause an over-eager removal of paths.
The functionality of isPathPrefix is required by other parts
and is untouched.
Unit tests are included to ensure that the logical functionality
is correct and can be preserved.
Change-Id: Ice2ca9406f09f1b179569e99b86a0e5d77baa20d
Signed-off-by: Magnus Vigerlöf <magnus.vigerlof@gmail.com>
Allow SHA1 instances to be reused to compute another hash value, and
resume caching them in ObjectInserter and PackParser. This shaves a
small amount of running time off parsing git.git's pack file:
before after
------ ------
25.25s 25.55s
25.48s 25.06s
25.26s 24.94s
Almost noise (small difference), but recycling the instances reduces
some stress on the memory allocator finding two 80 word message block
arrays needed for hashing and collision detection.
Change-Id: I4af88a720e81460293bc5c5d1d3db1a831e7e228
5e8e2179b2 (Update Jetty to
9.4.1.v201470120, 2017-01-26) updated Jetty in the maven build.
Update the buck build to match so buck builds work again.
The buck build will go away soon, but in the meantime (until the bazel
build gets the same level of support) it is convenient as a faster way
of running tests than using maven.
The bazel build doesn't need this change since it doesn't build or run
http tests yet.
Change-Id: Ibbdaf2880e76b32fc9f6b5605a2ff29e3deffda2
Generate names for objects using only the pure Java SHA1
implementation, but continue using MessageDigest in tests.
This opens the possibility of changing the hashing function
to incorporate additional safety measures, such as those
used in sha1dc[1].
Since MessageDigest has higher throughput, continue using
MessageDigest for computing pack, idx and DirCache trailers.
These are less likely to be sensitive to SHAttered[2] types
of attacks, as Git uses them to detect random bit flips
during transfer, and not for content identity.
[1] https://github.com/cr-marcstevens/sha1collisiondetection
[2] https://shattered.it/
Change-Id: If6da98334201f7f20cb916e46f782c45f373784e
This implementation is derived straight from the description written
in RFC 3174. On Mac OS X with Java 1.8.0_91 it offers similar
throughput as MessageDigest SHA-1:
system 239.75 MiB/s
system 244.71 MiB/s
system 245.00 MiB/s
system 244.92 MiB/s
sha1 234.08 MiB/s
sha1 244.50 MiB/s
sha1 242.99 MiB/s
sha1 241.73 MiB/s
This is the fastest implementation I could come up with. Common SHA-1
implementation tricks such as unrolling loops creates a method too
large for the JIT to effectively optimize, resulting in lower overall
hashing throughput. Using a preprocessor to perform the register
renaming of A-E also didn't help, as again the method was too large
for the JIT to effectively optimize.
Fortunately the fastest version is a naive, straight-forward
implementation very close to the description in RFC 3174.
Change-Id: I228b05c4a294ca2ad51386cf0e47978c68e1aa42
Since the introduction of generic type parameter inference in Java 7,
it's not necessary to explicitly specify the type of generic parameters.
Enable the warning in Eclipse, and fix all occurrences.
Change-Id: I9158caf1beca5e4980b6240ac401f3868520aad0
Signed-off-by: David Pursehouse <david.pursehouse@gmail.com>
FileRepository is in the package org.eclipse.jgit.internal, and is
thus non-API. This causes warnings in Eclipse when FileRepository is
used.
Add a filter to prevent the warnings.
Change-Id: I9a8ae106c085bb0e826031fa183b4c4bdabcc5fc
Signed-off-by: David Pursehouse <david.pursehouse@gmail.com>
In 0bff481d45 to accurately use the two
limits it was necessary to move the LimitedInputStream out of the
PacketLineIn and further down to the PackParser. Unfortuantely this
didn't survive review, as a buggy test failed and the "fix" was to
drop this part of the code.
The maxPackSizeLimit should apply to the pack stream, not the pkt-line
framing used to send commands to control the ReceivePack instance. The
commands are controlled using a different limit. The failing test allowed
too many bytes in the pack and was only failing because it was including
the command framing. The correct fix for the test was simply to drop the
limit lower, to more closely match the actual pack size.
Change-Id: I47d3885b9d7d527e153df7ac9c62fc2865ceecf4
RevCommit.getCommitTime returns time in seconds since the epoch.
ZipArchiveEntry.setTime expects time in milliseconds.
Add the missing unit conversion to get the correct result.
Correct formatting to be consistent with the rest of the code.
Change-Id: I990b92f1d996ec8538d4857755694d91b142eb53
Set missingOverrideAnnotation=warning in Eclipse compiler preferences
which enables the warning:
The method <method> of type <type> should be tagged with @Override
since it actually overrides a superclass method
Justification for this warning is described in:
http://stackoverflow.com/a/94411/381622
Enabling this causes in excess of 1000 warnings across the entire
code-base. They are very easy to fix automatically with Eclipse's
"Quick Fix" tool.
Fix all of them except 2 which cause compilation failure when the
project is built with mvn; add TODO comments on those for further
investigation.
Change-Id: I5772061041fd361fe93137fd8b0ad356e748a29c
Signed-off-by: David Pursehouse <david.pursehouse@gmail.com>
MappedLoginService is no longer available in Jetty 9.4 therefore base
TestLoginService on AbstractLoginService.
Apparently Jetty now uses slf4j hence adapt RecordingLogger accordingly
so we can log error messages containing slf4j style formatting anchors
"{}".
Change-Id: Ibb36aba8782882936849b6102001a88b699bb65c
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Add a new method setTagOpt which sets the annotated tag behavior during
fetch. Pass the option to the fetch command.
No explicit tests are added; the fetch with tags functionality is already
covered by the tests of the fetch command.
Change-Id: I131e1f68d8fcced178d8fa48abf7ffab17f8e173
Signed-off-by: David Pursehouse <david.pursehouse@gmail.com>
Archived zip files for a same commit have different MD5 hash because
mdate and mdate in the header of zip entries are not specified. In
this case, Commons Compress sets an archived time.
In the original git implementation, it's set a commit time:
e2b2d6a172/archive.c (L378)
By this fix, archive command sets the commit time to ZipArchiveEntry
when RevCommit is given as an archiving target.
Change-Id: I30dd8710e910cdf42d57742f8709e9803930a123
Signed-off-by: Naoki Takezoe <takezoe@gmail.com>
Signed-off-by: David Pursehouse <david.pursehouse@gmail.com>
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
If the pruneexpire config is set to "now", then any unreferenced loose
objects are immediately eligible for gc. So there is no need to
actually write the loose objects.
Users who run hosting services which sometimes accept large, entirely
garbage packs might set the following configurations:
gc.pruneExpire = now
gc.prunePackExpire = 2.weeks
Then garbage objects will be kept around in packs, but after two weeks
the packs themselves will get deleted.
For client-side users of jgit, the default settings will loosen
garbage objects, and, after an hour, delete the old packs in which
they resided.
Change-Id: I8f686ac60b40181b1ee92ac6c313c3f33b55c44c
Signed-off-by: David Turner <dturner@twosigma.com>
Without this, using bazel 0.4.4 to build fails:
ERROR: jgit/org.eclipse.jgit/BUILD:29:1: Java compilation in rule '//org.eclipse.jgit:insecure_cipher_factory' failed: Worker process sent response with exit code: 1.
jgit/src/org/eclipse/jgit/transport/InsecureCipherFactory.java:63: error: [InsecureCryptoUsage] Insecure usage of a crypto API: the transformation is not a compile-time constant expression.
return Cipher.getInstance(algo);
^
(see http://errorprone.info/bugpattern/InsecureCryptoUsage)
Change-Id: I7f9a3a5117e42cb68544674f5312df0368aa3674
At beginning of the OBJECT_SCAN loop, it will first check if the object
exists in the last pack, however, it forgot to avoid garbage pack for
the first iteration.
Change-Id: I8a99c0f439218d19c49cd4dae891b8cc4a57099d
Signed-off-by: Zhen Chen <czhen@google.com>
There are multiple places in DfsReader to skip garbage pack if both of
the following conditions satisfied:
* AvoidUnreachable flag is set
* The pack is a garabge pack
Refactor them into a shared private method.
Change-Id: I67d6bb601db55f904437c807c6a3c36f0a723265
Signed-off-by: Zhen Chen <czhen@google.com>
Place a configurable upper bound on the amount of command data
received from clients during `git push`. The limit is applied to the
encoded wire protocol format, not the JGit in-memory representation.
This allows clients to flexibly use the limit; shorter reference names
allow for more commands, longer reference names permit fewer commands
per batch.
Based on data gathered from many repositories at $DAY_JOB, the average
reference name is well under 200 bytes when encoded in UTF-8 (the wire
encoding). The new 3 MiB default receive.maxCommandBytes allows about
11,155 references in a single `git push` invocation. A Gerrit Code
Review system with six-digit change numbers could still encode 29,399
references in the 3 MiB maxCommandBytes limit.
Change-Id: I84317d396d25ab1b46820e43ae2b73943646032c
Signed-off-by: David Pursehouse <david.pursehouse@gmail.com>
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
In one place version 3.0.4 is used, and in another place 3.0.3 is
used.
Define the version (3.0.4) in a property and use that in both places,
so it doesn't get inconsistent again next time the version is bumped.
Change-Id: If3a2489cec78c0c9ef76aa6b941fda51b098e04b
Signed-off-by: David Pursehouse <david.pursehouse@gmail.com>
David Pursehouse
Matthias Sohn
Jonathan Nieder
Thomas Wolf
Shawn Pearce
Magnus Vigerlöf
Naoki Takezoe
David Turner
Zhen Chen