allRefs determined the end of the ref block without accounting for
index or log blocks. This could cause other blocks to be interpreted
as ref blocks, leading to "invalid block" error messages.
Change-Id: I7b9323e7d5e0e7d64535b3ec1efd576aed1e9870
Signed-off-by: Han-Wen Nienhuys <hanwen@google.com>
Since commit c3b0dec509fe136c5417422f31898b5a4e2d5e02, Git has
disallowed writing a non-commit to refs/heads/* refs. JGit still
allows that, which can put users in a bad situation. For example,
git push origin v1.0:master
pushes the tag object v1.0 to refs/heads/master, instead of the
intended commit object v1.0^{commit}.
Prevent that by validating that the target of the ref points to a
commit object when pushing to refs/heads/*.
Git performs the same check at a lower level (in the RefDatabase). We
could do the same here, but for now let's start conservatively by
handling it in pushes first.
[jn: fleshed out commit message]
Change-Id: I8f98ae6d8acbcd5ef7553ec732bc096cb6eb7c4e
Signed-off-by: Yunjie Li <yunjieli@google.com>
Signed-off-by: Jonathan Nieder <jrn@google.com>
PackedBatchRefUpdate was creating a new packed-refs list that was
potentially unsorted. This would be papered over when the list was
read back from disk in parsePackedRef, which detects unsorted ref
lists on reading, and sorts them. However, the BatchRefUpdate also
installed the new (unsorted) list in-memory in
RefDirectory#packedRefs.
With the timestamp granularity code committed to stable-5.1, we can
more often accurately decide that the packed-refs file is clean, and
will return the erroneous unsorted data more often. Unluckily timed
delays also cause the file to be clean, hence this problem was
exacerbated under load.
The symptom is that refs added by a BatchRefUpdate would stop being
visible directly after they were added. In particular, the Gerrit
integration tests uses BatchRefUpdate in its setup for creating the
Admin group, and then tries to read it out directly afterward.
The tests recreates one failure case. A better approach would be to
revise RefList.Builder, so it detects out-of-order lists and
automatically sorts them.
Fixes https://bugs.eclipse.org/bugs/show_bug.cgi?id=548716 and
https://bugs.chromium.org/p/gerrit/issues/detail?id=11373.
Bug: 548716
Change-Id: I613c8059964513ce2370543620725b540b3cb6d1
Signed-off-by: Han-Wen Nienhuys <hanwen@google.com>
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
The only usage of this test iterator was removed in df637928d. Hence
delete this iterator and associated test.
Change-Id: I47710133ec3edc675c21db210960c024982668c6
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
(cherry picked from commit a024759cf5)
This test case assumed file system timestamp resolution of 1 second. On
filesystems with a finer resolution this test fails since the index
entry is only smudged if the file index entry's lastModified and the
lastModified of the git index itself are within the same filesystem
timer tick. Fix this by ensuring that these timestamps are identical
which should work for any filesystem timer resolution.
Bug: 548188
Change-Id: Id84d59e1cfeb48fa008f8f27f2f892c4f73985de
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Signed-off-by: Christian Halstrick <christian.halstrick@sap.com>
(cherry picked from commit 1159f9dd7c)
By using File#setLastModified, we can create a racy git situation
stably.
Tested with --runs_per_test=100
Bug: 526111
Change-Id: I60b3632d353e19f335668325aa603640be423f58
Signed-off-by: Masaya Suzuki <masayasuzuki@google.com>
(cherry picked from commit df637928d2)
Move the handling of cached user and system config to getSystemConfig
and getUserConfig methods and revert the implementation of
openSystemConfig and openUserConfig to the old stateless
implementation.
This ensures the open methods respect the passed-in parent config, which
may be different on each invocation. Additionally, returning a new
instance matches the behavior of the previous implementation of the
default system reader, which downstream callers may be depending on.
Move the implementation of the new caching methods getSystemConfig and
getUserConfig up to SystemReader. This avoids that we break the ABI for
subclasses of SystemReader.
Also see [1] which fixed a similar problem with Gerrit's custom
SystemReader.
[1] https://gerrit-review.googlesource.com/c/gerrit/+/225458
Change-Id: If54a2491932d8fc914d4649cb73c9e837c5b8ad0
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
When firstParent is set, RevWalk traverses only the first parent of a
commit, even though that commit is UNINTERESTING. Since we want the
maximal UNINTERESTING set, we shouldn't prune any parents here. This
issue is apparent only when some of the commits being traversed are
unparsed, since walker.carryFlagsImpl() propagates the UNINTERESTING
flag to all parsed ancestors, masking the issue.
Therefore teach RevWalk to traverse all parents when a commit is
UNINTERESTING and not only the first parent. Since this issue is
masked by commit parsing, also test situations when the commits
involved are unparsed.
Signed-off-by: Alex Spradlin <alexaspradlin@google.com>
Change-Id: I95e2ad9ae8f1f50fbecae674367ee7e0855519b1
It's expected that jgit should work without native git installation.
In such case Security Manager can be configured to deny access to the
files outside of git repository. JGit tries to find cygwin
installation. If Security manager restricts access to some folders
in PATH, it should be considered that those folders are absent
for jgit.
Also JGit tries to detect if symbolic links are supported by OS. If
security manager forbids creation of symlinks, it should be assumed
that symlinks aren't supported.
Bug: 550115
Change-Id: Ic4b243cada604bc1090db6cc1cfd74f0fa324b98
Signed-off-by: Nail Samatov <sanail@yandex.ru>
Teach UploadPack to take a provider of URIs corresponding to cached
packs. When fetching, if the client supports the packfile-uri feature,
and if such a cached pack were to be streamed, instead send the
corresponding URI.
This packfile-uri feature is implemented in the jt/fetch-cdn-offload
branch of Git. There is interest in this feature [1], but it is not yet
merged.
[1] https://public-inbox.org/git/cover.1552073690.git.jonathantanmy@google.com/
Change-Id: I9a32dae131c9c56ad2ff4a8a9638ae3b5e44dc15
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Previously, the API did not enforce ordering of writes. Misuse of
this API would lead to data effectively being lost.
Guard against that with IllegalArgumentException, and add a test.
Change-Id: I04f55c481d60532fc64d35fa32c47037a03988ae
Signed-off-by: Han-Wen Nienhuys <hanwen@google.com>
Small reftables omit the log index. Currently,
ReftableWriter#shouldHaveIndex does this if there is a single-block
log, but other writers could decide on different criteria.
In the case that the log index is missing, we have to linearly search
for the right block. It is never appropriate to use binary search on
blocks for log data, as the blocks are compressed and therefore
irregularly sized.
Signed-off-by: Han-Wen Nienhuys <hanwen@google.com>
Change-Id: Id59874edf6bf45c7dec502d9465888e077ffe198
So far the git configuration and the system wide git configuration were
always reloaded when jgit accessed these global configuration files to
access global configuration options which are not in the context of a
single git repository. Cache these configurations in SystemReader and
only reload them if their file metadata observed using FileSnapshot
indicates a modification.
Change-Id: I092fe11a5d95f1c5799273cacfc7a415d0b7786c
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
Tests shall not modify ~/.gitconfig. When running tests with bazel this
test failed since bazel isolates tests in a sandbox.
Change-Id: I7dd092afd14972da58a95eb7c200d353f0959fa1
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
The method org.eclipse.jgit.util.FS.supportsAtomicCreateNewFile()
should default to true as mentioned in docs [1]
org.eclipse.jgit.util.FS_POSIX.supportsAtomicCreateNewFile() method
will set the value to false if the git config
core.supportsatomiccreatenewfile is not set.
It should default to true if the configuration is undefined.
[1]
4169a95a65/org.eclipse.jgit/src/org/eclipse/jgit/util/FS_POSIX.java (L372)
Bug: 544164
Change-Id: I16ccf989a89da2cf4975c200b3228b25ba4c0d55
Signed-off-by: Vishal Devgire <vishaldevgire@gmail.com>
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
It missed to call the setup() method of its super class which prepares
the MockSystemReader
Change-Id: I39858749f8d0115fc6ac7edc8847ffb2bbc85c33
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
If we use the default system reader FileStoreAttributes cannot persist
attributes in userConfig when tests run in Bazel due to sandboxing.
Hence we need to ensure that all tests use MockSystemReader (and
especially a mocked userConfig).
Change-Id: Ic1ad8e2ec5a150c5433434a5f6667d6c4674c87d
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Move the implementation of the static equals() method to a new method
and suppress the error. Deprecate the old method to signal that we
intend to remove it in the next major release.
See https://errorprone.info/bugpattern/AmbiguousMethodReference
Change-Id: I5e29c97f4db3e11770be589a6ccd785e2c9ac7f2
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Error Prone reports:
[NarrowingCompoundAssignment] Compound assignments from long to int
hide lossy casts
and
[NarrowingCompoundAssignment] Compound assignments from int to byte
hide lossy casts
See https://errorprone.info/bugpattern/NarrowingCompoundAssignment
Fix the warnings by adding explicit casts or changing types as
necessary.
Now that all occurrences of the warning are fixed, increase its
severity to ERROR.
Change-Id: Idb3670e6047b146ae37daee07212ff9455512623
Signed-off-by: David Pursehouse <david.pursehouse@gmail.com>
- use FS.DETECTED instead of db.getFS() since the ssh config is
typically in a different place than the repository, the same is used in
OpenSshConfig
- reduce unnecessary repeated writes by introducing wait for one tick of
the file time resolution
Change-Id: Ifac915e97ff420ec5cf8e2f162e351f9f51b6b14
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Increase the safety factor to 2.5x for extra safety if max of measured
timestamp resolution and measured minimal racy threshold is < 100ms, use
1.25 otherwise since for large filesystem resolution values the
influence of finite resolution of the system clock should be negligible.
Before, not yet using the newly introduced minRacyThreshold measurement,
the threshold was 1.1x FS resolution, and we could issue the
following sequence of events,
start
create-file
read-file (currentTime)
end
which had the following timestamps:
create-file 1564589081998
start 1564589082002
read 1564589082003
end 1564589082004
In this case, the difference between create-file and read is 5ms,
which exceeded the 4ms FS resolution, even though the events together
took just 2ms of runtime.
Reproduce with:
bazel test --runs_per_test=100 \
//org.eclipse.jgit.test:org_eclipse_jgit_internal_storage_file_FileSnapshotTest
The file system timestamp resolution is 4ms in this case.
This code assumes that the kernel and the JVM use the same clock that
is synchronized with the file system clock. This seems plausible,
given the resolution of System.currentTimeMillis() and the latency for
a gettimeofday system call (typically ~1us), but it would be good to
justify this with specifications.
Also cover a source of flakiness: if the test runs under extreme load,
then we could have
start
create-file
<long delay>
read
end
which would register as an unmodified file. Avoid this by skipping the
test if end-start is too big.
[msohn]:
- downported from master to stable-5.1
- skip test if resolution is below 10ms
- adjust safety factor to 1.25 for resolutions above 100ms
Change-Id: I87d2cf035e01c44b7ba8364c410a860aa8e312ef
Signed-off-by: Han-Wen Nienhuys <hanwen@google.com>
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Cache FileStoreAttributeCache entries since looking up FileStore for a
file may be expensive on some platforms.
Implement a simple LRU cache based on ConcurrentHashMap using a simple
long counter to order access to cache entries.
Change-Id: I4881fa938ad2f17712c05da857838073a2fc4ddb
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Signed-off-by: Marc Strapetz <marc.strapetz@syntevo.com>
Also-By: Marc Strapetz <marc.strapetz@syntevo.com>
To enable persisting the minimal racy threshold per FileStore add a
new config option to the user global git configuration:
- Config section is "filesystem"
- Config subsection is concatenation of
- Java vendor (system property "java.vendor")
- Java version (system property "java.version")
- FileStore's name, on Windows we use the attribute volume:vsn instead
since the name is not necessarily unique.
- separated by '|'
e.g.
"AdoptOpenJDK|1.8.0_212-b03|/dev/disk1s1"
The same prefix is used as for filesystem timestamp resolution, so
both values are stored in the same config section
- The config key for minmal racy threshold is "minRacyThreshold" as a
time value, supported time units are those supported by
DefaultTypedConfigGetter#getTimeUnit
- measure for 3 seconds to limit runtime which depends on hardware, OS
and Java version being used
If the minimal racy threshold is configured for a given FileStore the
configured value is used instead of measuring it.
When the minimal racy threshold was measured it is persisted in the user
global git configuration.
Rename FileStoreAttributeCache to FileStoreAttributes since this class
is now declared public in order to enable exposing all attributes in one
object.
Example:
[filesystem "AdoptOpenJDK|11.0.3|/dev/disk1s1"]
timestampResolution = 7000 nanoseconds
minRacyThreshold = 3440 microseconds
Change-Id: I22195e488453aae8d011b0a8e3276fe3d99deaea
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Also-By: Marc Strapetz <marc.strapetz@syntevo.com>
By running FileSnapshotTest#detectFileModified we found that the sum of
measured filesystem timestamp resolution and measured clock resolution
may yield a too small interval after a file has been modified which we
need to consider racily clean. In our tests we didn't find this behavior
on all systems we tested on, e.g. on MacOS using APFS and Java 8 and 11
this effect was not observed.
On Linux (SLES 15, kernel 4.12.14-150.22-default) we collected the
following test results using Java 8 and 11:
In 23-98% of 10000 test runs (depending on filesystem type and Java
version) the test failed, which means the effective interval which needs
to be considered racily clean after a file was modified is larger than
the measured file timestamp resolution.
"delta" is the observed interval after a file has been modified but
FileSnapshot did not yet detect the modification:
"resolution" is the measured sum of file timestamp resolution and clock
resolution seen in Java.
Java version filesystem failures resolution min delta max delta
1.8.0_212-b04 btrfs 98.6% 1 ms 3.6 ms 6.6 ms
1.8.0_212-b04 ext4 82.6% 3 ms 1.1 ms 4.1 ms
1.8.0_212-b04 xfs 23.8% 4 ms 3.7 ms 3.9 ms
1.8.0_212-b04 zfs 23.1% 3 ms 4.8 ms 5.0 ms
11.0.3+7 btrfs 98.1% 3 us 0.7 ms 4.7 ms
11.0.3+7 ext4 98.1% 6 us 0.7 ms 4.7 ms
11.0.3+7 xfs 98.5% 7 us 0.1 ms 8.0 ms
11.0.3+7 zfs 98.4% 7 us 0.7 ms 5.2 ms
Mac OS
1.8.0_212 APFS 0% 1 s
11.0.3+7 APFS 0% 6 us
The observed delta is not distributed according to a normal gaussian
distribution but rather random in the observed range between "min delta"
and "max delta".
Run this test after measuring file timestamp resolution in
FS.FileAttributeCache to auto-configure JGit since it's unclear what
mechanism is causing this effect.
In FileSnapshot#isRacyClean use the maximum of the measured timestamp
resolution and the measured "delta" as explained above to decide if a
given FileSnapshot is to be considered racily clean. Add a 30% safety
margin to ensure we are on the safe side.
Change-Id: I1c8bb59f6486f174b7bbdc63072777ddbe06694d
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
These are useful to avoid typos, and also for tab completion.
Change-Id: I0f2d267e46b36bc40297c9657c447f3fd8b9f831
Signed-off-by: David Turner <dturner@twosigma.com>
In a subsequent patch, in some cases, PackWriter#writePack will be
responsible for both the "packfile-uris" and "packfile" sections,
meaning that (in these cases) it must write the "packfile" section
header itself.
In preparation for that patch, move the writing of the "packfile"
section header closer to the invocation of PackWriter#writePack when the
entire fetch response is configured to use the sideband. This means that
"packfile" is written *after* objects are counted (and progress messages
sent to the client in sideband 2) when the "sideband-all" feature is
used (whether "packfile-uris" is used or not), and written *before*
objects are counted otherwise.
Having code to write "packfile" in two places is unfortunate but
necessary. When "sideband-all" is not used, object counting has to
happen after "packfile" is written, because "packfile" activates the
sideband that allows counting progress to be transmitted. When
"packfile-uris" is used, object counting has to happen before "packfile"
is written, because object counting determines whether to send
"packfile-uris" or "packfile". When "sideband-all" is used but
"packfile-uris" is not used, either way works; this commit uses
"packfile-uris" behavior in this case.
Also make the naming of the sideband-activating methods in PacketLineOut
more consistent.
Change-Id: Ifbfd26cc26af10c41b77758168833702d6983df1
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Repeat the test 10000 times to get statistics if measured
fsTimestampResolution is working in practice to detect racy git
situations.
Add a class to compute statistics for this test. Log delta between
lastModified and time when FileSnapshot failed to detect modification.
This happens if the racy git limit determined by measuring filesystem
timestamp resolution and clock resolution is too small. If it would be
correct FileSnapshot would always detect modification or mark it
modified if time since modification is smaller than the racy git limit.
Change-Id: Iabe7af1a7211ca58480f8902d4fa4e366932fc77
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
The newly introduced ProtocolV2HookChain is implemented using lists
instead of arrays.
Update PostUploadHookChain to keep the hook chains implementation
consistent.
Change-Id: I5ae0c923f117ac48558a989464f5d5d868d81f76
Signed-off-by: Ivan Frade <ifrade@google.com>
The newly introduced ProtocolV2HookChain is implemented using lists
instead of arrays.
Update PostUploadHookChain to keep hook chain implementations
consistent.
Change-Id: Ic5694feab943e8949896b93103dbf427716c9bd7
Signed-off-by: Ivan Frade <ifrade@google.com>
This should help to detect if measured fsTimeResolution is too small.
Change-Id: Id1f54dbdedb52b17859904e47776fa3a5887b8be
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
When filesystem timestamp resolution is very high some tests don't work
since runtime of the test setup is too long to reach a racily clean
FileSnapshot. Hence skip these tests when timestamp resolution is higher
than 10 millisecond.
Change-Id: Ie47dd10eda22037b5c1ebff6b6becce0654ea807
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
This helps to avoid some time critical tests can't prepare the test
fixture intended since measuring timestamp resolution takes time.
Change-Id: Ib34023e682a106070ca97e98ef16789a4dfb97b4
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
- use Path instead of File
- create test directories, files and output stream using Files methods
- delete unused list "files"
Change-Id: I8c5c601eca9f613efb5618d33b262277df92a06a
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
UploadPack only supports one protocol-v2 hook. There are already cases
where more than one is needed.
Offer a Chain class to compose ProtocolV2Hooks, as other hooks do. It
looks like a single hook but it calls all its members.
Change-Id: Idd173ca7df6672079ac0de03c67f77abac376538
Signed-off-by: Ivan Frade <ifrade@google.com>
This enables higher file timestamp resolution on filesystems like ext4,
Mac APFS (1ns) or NTFS (100ns) providing high timestamp resolution on
filesystem level.
Note:
- on some OSes Java 8,9 truncate milliseconds, see
https://bugs.openjdk.java.net/browse/JDK-8177809, fixed in Java 10
- UnixFileAttributes truncates timestamp resolution to microseconds when
converting the internal representation to FileTime exposed in the API,
see https://bugs.openjdk.java.net/browse/JDK-8181493
- WindowsFileAttributes also provides only microsecond resolution
Change-Id: I25ffff31a3c6f725fc345d4ddc2f26da3b88f6f2
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Use a Consumer instead of several nullable variables to further
configure UploadPack. This is in preparation for a test in a subsequent
patch needing further customization of the UploadPack object before
invoking it.
Change-Id: I074dff92c711a5ba74558bb4b06c42c115fb9b7f
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Allow the client to specify "sideband-all" in a fetch v2 request,
indicating that the whole response is to be multiplexed (with a sideband
indicator on every non-flush and non-delim pkt) instead of only the
packfile being multiplexed. This allows, for example, progress messages
to be sent at any point in the response.
This implements the "sideband-all" feature documented in
Documentation/technical/protocol-v2.txt in Git.
Change-Id: I3e7f21c88ff0982b1b7ebb09c9ad6c742c4483c8
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
UploadPackTest.java contains tests that check behavior when
"allowfilter" and "allowrefinwant" are not set, are set, and are not set
but the client insists on using them anyway. Because another capability
is to be included in a subsequent patch, refactor the common code in
these tests.
Remove setBoolean calls with "false", as they are no-ops.
Also take the opportunity to eliminate the overspecification of the
"fetch=" line returned by the capability advertisement.
Change-Id: I289bbd11c902a513cd8d53bc34767e61ebbd5f17
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
The only usage of this test iterator was removed in df637928d. Hence
delete this iterator and associated test.
Change-Id: I47710133ec3edc675c21db210960c024982668c6
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Add a unittest.
In commit I5485db55 ("Fix FileSnapshot's consideration of file size"),
the special casing of UNKNOWN_SIZE was forgotten.
This change, together with I493f3b57b ("Measure file timestamp
resolution used in FileSnapshot") introduced a regression that would
occasionally surface in Gerrit integration tests marked UseLocalDisk,
with the symptom that creating the Admin user in NoteDb failed with a
LOCK_FAILURE.
Signed-off-by: Han-Wen Nienhuys <hanwen@google.com>
Change-Id: I7ffd972581f815c144f810481103c7985af5feb0
This test case assumed file system timestamp resolution of 1 second. On
filesystems with a finer resolution this test fails since the index
entry is only smudged if the file index entry's lastModified and the
lastModified of the git index itself are within the same filesystem
timer tick. Fix this by ensuring that these timestamps are identical
which should work for any filesystem timer resolution.
Bug: 548188
Change-Id: Id84d59e1cfeb48fa008f8f27f2f892c4f73985de
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Signed-off-by: Christian Halstrick <christian.halstrick@sap.com>
Han-Wen Nienhuys
Yunjie Li
Matthias Sohn
Masaya Suzuki
Alex Spradlin
Nail Samatov
Jonathan Tan
Anton Khodos
Vishal Devgire
David Pursehouse
David Turner
Ivan Frade