FileSnapshot.isModified may have reported a file to be clean although it
was actually dirty.
Imagine you have a FileSnapshot on file f. lastmodified and lastread are
both t0. Now time is t1 and you
1) modify the file
2) update the FileSnapshot of the file (lastModified=t1, lastRead=t1)
3) modify the file again
4) wait 3 seconds
5) ask the Filesnapshot whether the file is dirty or not. It erroneously
answered it's clean.
Any file which has been modified longer than 2.5 seconds ago was
reported to be clean. As the test shows that's not always correct.
The real-world problem fixed by this change is the following:
* A gerrit server using JGit to serve git repositories is processing
fetch requests while simultaneously a native git garbage collection
runs on the repo.
* At time t1 native git writes temporary files in the pack folder
setting the mtime of the pack folder to t1.
* A fetch request causes JGit to search for new packfiles and JGit
remembers this scan in a Filesnapshot on the packs folder. Since the gc
is not finished JGit doesn't see any new packfiles.
* The fetch is processed and the gc ends while the filesystem timer is
still t1. GC writes a new packfile and deletes the old packfile.
* 3 seconds later another request arrives. JGit does not yet know about
the new packfile but is also not rescanning the pack folder because it
cached that the last scan happened at time t1 and pack folder's mtime is
also t1. Now JGit will not be able to resolve any object contained in
this new pack. This behavior may be persistent if objects referenced by
the ref/meta/config branch are affected so gerrit can't read permissions
stored in the refs/meta/config branch anymore and will not allow any
pushes anymore. The pack folder will not change its mtime and therefore
no rescan will take place.
Change-Id: I3efd0ccffeb97b01207dc3e7a6b85c6b06928fad
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Fix JGits merge-base calculation in case of inconsistent commit times.
JGit was potentially failing to compute correct merge-bases when the
commit times where inconsistent (a parent commit was younger than a
child commit). The code in MergeBaseGenerator was aware of the fact that
sometimes the discovery of a merge base x can occur after the parents of
x have been seen (see comment in #carryOntoOne()). But in the light of
inconsistent commit times it was possible that these parents of a
merge-base have already been returned as a merge-base.
This commit fixes the bug by buffering all commits generated by
MergeBaseGenerator. It is expected that this buffer will be small
because the number of merge-bases will be small. Additionally a new
flag is used to mark the ancestors of merge-bases. This allows to filter
out the unwanted commits.
Bug: 507584
Change-Id: I9cc140b784c3231b972bd2c3de61a789365237ab
Use Oxygen M3 Orbit repository which provides the bundles built using
the new orbit-recipe based build.
CQ: 11658
Change-Id: I7f3dcc966732b32830c75d5daa55383bd028d182
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Java 8 fixed the silent flush during close issue by
FilterOutputStream (base class of BufferedOutputStream)
using try-with-resources to close the stream, getting a
behavior matching what JGit's SafeBufferedOutputStream
was doing:
try {
flush();
} finally {
out.close();
}
With Java 8 as the minimum required version to run JGit
it is no longer necessary to override close() or have
this class. Deprecate the class, and use the JRE's version
of close.
Change-Id: Ic0584c140010278dbe4062df2e71be5df9a797b3
This method pair allows the caller to read and modify the description
file that is traditionally used by gitweb and cgit when rendering a
repository on the web.
Gerrit Code Review has offered this feature for years as part of
its GitRepositoryManager interface, but its fundamentally a feature
of JGit and its Repository abstraction.
git-core typically initializes a repository with a default value
inside the description file. During getDescription() this string
is converted to null as it is never a useful description.
Change-Id: I0a457026c74e9c73ea27e6f070d5fbaca3439be5
In case a value is used which isn’t a power of 2 there will be a high
chance of java.lang.ArrayIndexOutBoundsException and
org.eclipse.jgit.errors.CorruptObjectException due to a mismatching
assumption for the DfsBlockCache#blockSizeShift parameter.
Change-Id: Ib348b3704edf10b5f93a3ffab4fa6f09cbbae231
Signed-off-by: Philipp Marx <smigfu@googlemail.com>
* GC.tooManyLooseObjects() always responded true since the loop missed
to advance the iterator so it always incremented until the threshold was
exceeded.
* Also fix loop exit criterion which was off by 1.
* Add some tests.
Change-Id: I70976dfaa026efbcf3c46bd45941f37277a18e04
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Previously, the streamFileThreshold, the threshold at which a file
would be streamed rather than loaded entirely into memory, was only
configurable on a global basis.
This commit makes this threshold configurable on a per-loader basis.
Bug: 490404
Change-Id: I492c18c3155dbf56eedda9044a61d76120fd75f9
Signed-off-by: Kevin Corcoran <kevin.corcoran@puppetlabs.com>
Signed-off-by: David Pursehouse <david.pursehouse@gmail.com>
Git barfs on these (and they don't make any sense), so we certainly
shouldn't write them.
Change-Id: I3faf8554a05f0fd147be2e63fbe55987d3f88099
Signed-off-by: David Turner <dturner@twosigma.com>
Signed-off-by: David Pursehouse <david.pursehouse@gmail.com>
Upgrade to match the version used on Gerrit's master branch.
Requires a couple of modifications to make the tests work:
- Remove source_under_test parameters from java_test calls.
- Add vm_args with explicit setting of tmpdir location for http
tests. This is needed due to upstream changes in temporary
directory handling [1].
[1] https://github.com/facebook/buck/issues/946
Change-Id: I5d5dd5edc335d44b118e8587f69ba89b83fc7fbb
Signed-off-by: David Pursehouse <david.pursehouse@gmail.com>
If the repository close method was called twice (or more) for one open,
the usage count became negative and the repository was never be evicted
from the cache because the method checking if repository is expired was
not considering negative usage count.
Change-Id: I18a80c415c54c37d1b9def2b311ff2d0afa455ca
Signed-off-by: Hugo Arès <hugo.ares@ericsson.com>
Symlinks on MacOS are written as UTF-8 NFD, but
readSymbolicLink().toString() converts to NFC with potentially fewer
bytes. May occur in particular if the link target has non-ASCII
characters for which the NFC and NFD encodings differ. This may lead
to an EOFException: Short read of block.
This causes all kinds of weird effects in EGit, ranging from failing
rebases (which report the exception to the user) to EGit decorations in
the navigator silently disappearing (and never coming back).
* Rename readContentAsNormalizedString() to readSymlinkTarget() as it's
called only for symlinks. Also make it protected.
* Fix by allowing the read to succeed even if less than the expected
number of bytes are returned by the entry's input stream.
* Override in FileTreeIterator to use fs.readSymlink() directly.
Includes a new MacOS-only test.
Change-Id: I264c5972d67b1cbb1ed690580f5706e671b9affd
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
CheckoutCommand was not returning updated and removed files in case of
an overall status of NONDELETED. That's status which occurs especially
on the Windows platform when Checkout wanted to delete files but the
filesystem doesn't allow this. The situation is more seldom on linux/mac
because open filehandles don't stop a deletion attempt and checkout
succeeds more often.
Change-Id: I4828008e58c09bd8f9edaf0f7eda0a79c629fb57
There was a bug when carrying over flags from a merge commit to its
non-first parents. The first parent of a merge commit was handled
differently and correct but the non-first parents are handled by a
recursive algorithm. Flags should be copied from the root merge commit
to parent-2, to grandparent-2, ... up to the limit of STACK_DEPTH==500
parents-levels. But the recursive algorithm was always copying only to
the direct parents of the merge commit and not the grand*-parents.
This seems to be no problem when commits are handled in a strict date
order because then copying only one level is no problem if children are
handled before parents. But when commits are not seperated anymore by
distinctive correct dates (e.g. because all commits have the same date)
then it may happen that a merge-parent is handled before the merge
commit and when dealing later with the merge commit one has to copy
flags down to more than one level
Bug: 501211
Change-Id: I2d79a7cf1e3bce21a490905ccd9d5e502d7b8421
Change-Id: I26d69fb6d35c6fb120360ef143d1b1f565d4014c
Signed-off-by: David Pursehouse <david.pursehouse@gmail.com>
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Adds a JGit built-in implementation of the "git lfs smudge" filter. This
filter should do the same as the one described in [1] besides that it
only supports the local case when the lfs objects are already present in
the media directory. Remote cases where download of LFS objects from an
LFS server is needed will be done in a later commit.
[1] https://github.com/github/git-lfs/blob/master/docs/man/git-lfs-smudge.1.ronn
Change-Id: I8ff661d4edd3667ef7f86f3b4fa33e568eb4c8f4
Adds a JGit built-in implementation of the "git lfs clean" filter. This
filter should do the same as the one described in [1]. But since this
filter is written in Java and can be called by JGit without forking new
processes it should be much faster
[1]
https://github.com/github/git-lfs/blob/master/docs/man/git-lfs-clean.1.ronn
Change-Id: If60e387e97870245b4bd765eda6717eb84cffb1d
JGit supports smudge filters defined in repository configuration. The
filters are implemented as external programs filtering content by
accepting the original content (as seen in git's object database) on
stdin and which emit the filtered content on stdout. This content is
then written to the file in the working tree. To run such a filter JGit
has to start an external process and pump data into/from this process.
This commit adds support for built-in smudge filters which are
implemented in Java and which are executed by jgit's main thread. When a
filter is defined in the configuration as
"jgit://builtin/<filterDriverName>/smudge" then JGit will lookup in a
static map whether a builtin filter is registered under this name. If
found such a filter is called to do the filtering.
The functionality in this commit requires that a program using JGit
explicitly calls the JGit API to register built-in implementations for
specific smudge filters. In follow-up commits configuration parameters
will be added which trigger such registrations.
Change-Id: Ia743aa0dbed795e71e5792f35ae55660e0eb3c24
JGit supports clean filters defined in repository configuration. The
filters are implemented as external programs filtering content by
accepting the original content (as seen in the working tree) on stdin
and which emit the filtered content on stdout. To run such a filter JGit
has to start an external process and pump data into/from this process.
This commit adds support for clean filters which are implemented
in Java and which are executed by jgit's main thread. When a filter is
defined in the configuration as
"jgit://builtin/<filterDriverName>/clean" then JGit will lookup in a
static map whether a filter is registered under this name. If found
such a filter is called to do the filtering.
The functionality in this commit requires that a program using JGit
explicitly calls the JGit API to register built-in implementations for
specific clean filters. In follow-up commits configuration parameters
will be added which trigger such registrations. Other commits will add
implementations for lfs filters.
Change-Id: I0344d3c54801c9a46e5a606c5df17e5f2e17b2be
BranchConfig treated this config property as a boolean, but git also
allows the values "preserve" and "interactive". Config property
pull.rebase also allows the same values.
Replace private enum PullCommand.PullRebaseMode by new public enum
BranchConfig.BranchRebaseMode and adapt all uses. Add a new setter to
PullCommand.
Note: PullCommand will treat "interactive" like "true", i.e., as a
non-interactive rebase. Not sure how "interactive" should be handled.
At least it won't balk on it.
Bug: 499482
Change-Id: I7309360f5662b2c2efa1bd8ea6f112c63cf064af
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
Change-Id: I6691b454404dd4db3c690ecfc7515de765bc2ef7
Signed-off-by: Martin Goellnitz <m.goellnitz@outlook.com>
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
- enhance FS.readPipe to throw an exception if the external command
fails to enable the caller to handle the command failure
- reduce log level to warning if system git config does not exist
- improve log message
Bug: 476639
Change-Id: I94ae3caec22150dde81f1ea8e1e665df55290d42
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Without the bridge JGit tests don't show log output in Eclipse console.
Change-Id: I7acce1f1787960b5ca98377cb5c7f599a8a220b5
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Since 4.0 JGit does no longer support Java versions older than Java 7 so
there is no need anymore to mention Java 7 in the class name.
Change-Id: Ic46c9d89a7e919ae4a69487fa06de0478d2b21f0
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Refactor all of the push option support code to allocate the list
immediately before parsing the options section off the stream.
Move option support down to ReceivePack instead of BaseReceivePack.
Push options are specific to the ReceivePack protocol and are not
likely to appear in the 4 year old subscription proposal. These
changes are OK before JGit 4.5 ships as no consumer should be relying
on these new APIs.
Change-Id: Ib07d18c877628aba07da07cd91875f918d509c49
Initialize pushOptions when we decide to use them, instead of when we
advertise them.
In the case of HTTP the advertisement is in a different network
request, hence in a different instance of the BaseReceivePack.
Change-Id: I094c60942e04de82cb6d8433c9cd43a46ffae332
Signed-off-by: Stefan Beller <sbeller@google.com>
DfsRefDatabase#compareAndPut had a vague semantics for reference
matching. Because of this, an operation to make a symbolic
reference had been broken for some DFS implementations even if they
followed the contract of compareAndPut. The clarified semantics
requires the implementations to satisfy the followings:
* Matching references should be both symbolic references or both
object ID references.
* If both are symbolic references, both should have the same target
name.
* If both are object ID references, both should have the same object
ID.
This semantics is defined based on
https://git.eclipse.org/r/#/c/77416/. Before this commit,
DfsRefDatabase couldn't see the target of symbolic references.
InMemoryRepository is changed to comply with the new semantics. This
semantics change can affect the existing DFS implementations that only
checks object IDs. This commit adds two tests that the previous
InMemoryRepository couldn't pass.
Change-Id: I6c6b5d3cc8241a81f4a37782381c88e8a59fdf15
Signed-off-by: Masaya Suzuki <masayasuzuki@google.com>
The RepositoryTestCase hierarchy no longer comes from TestCase, so all
test methods must have @Test.
Fix one test that was broken but never run; fortunately this was just
a typo in the test code.
Change-Id: I3ac8ccdab5e2d5539c63d7b0a88d8bdb0c5ff66e
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
This fixes the tests failed in JDK8.
FS uses java.nio API to get file attributes. The timestamps obtained
from that API are more precise than the ones from
java.io.File#lastModified() since Java8.
This difference accidentally makes JGit detect newly added files as
smudged. Use the precised timestamp to avoid this false positive.
Bug: 500058
Change-Id: I9e587583c85cb6efa7562ad6c5f26577869a2e7c
Signed-off-by: Masaya Suzuki <masayasuzuki@google.com>
Signed-off-by: Andrey Loskutov <loskutov@gmx.de>
This will be used by EGit for implementing commit amend in the staging
view (see Idcd1efeeee8b3065bae36e285bfc0af24ab1e88f).
Change-Id: Ice9ebbb1c0c3314c679f4db40cdd3664f61c27c3
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
This fixes the warning "src/ is missing from source.."
Change-Id: I166e3a6a3d5230e4110d3283ec4dbc7d1dfe6732
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
cgit changed the --depth parameter to mean the total depth of history
rather than the depth of ancestors to be returned [1]. JGit still uses
the latter meaning, so update it to match cgit.
depth=0 still means a non-shallow clone. depth=1 now means only the
wants rather than the wants and their direct parents.
This is accomplished by changing the semantic meaning of "depth" in
UploadPack and PackWriter to mean the total depth of history desired,
while keeping "depth" in DepthWalk.{RevWalk,ObjectWalk} to mean
the depth of traversal. Thus UploadPack and PackWriter always
initialize their DepthWalks with "depth-1".
[1] upload-pack: fix off-by-one depth calculation in shallow clone
https://code.googlesource.com/git/+/682c7d2f1a2d1a5443777237450505738af2ff1a
Change-Id: I87ed3c0f56c37e3491e367a41f5e555c4207ff44
Signed-off-by: Terry Parker <tparker@google.com>
When fetching from a shallow clone, the client sends "have" lines
to tell the server about objects it already has and "shallow" lines
to tell where its local history terminates. In some circumstances,
the server fails to honor the shallow lines and fails to return
objects that the client needs.
UploadPack passes the "have" lines to PackWriter so PackWriter can
omit them from the generated pack. UploadPack processes "shallow"
lines by calling RevWalk.assumeShallow() with the set of shallow
commits. RevWalk creates and caches RevCommits for these shallow
commits, clearing out their parents. That way, walks correctly
terminate at the shallow commits instead of assuming the client has
history going back behind them. UploadPack converts its RevWalk to an
ObjectWalk, maintaining the cached RevCommits, and passes it to
PackWriter.
Unfortunately, to support shallow fetches the PackWriter does the
following:
if (shallowPack && !(walk instanceof DepthWalk.ObjectWalk))
walk = new DepthWalk.ObjectWalk(reader, depth);
That is, when the client sends a "deepen" line (fetch --depth=<n>)
and the caller has not passed in a DepthWalk.ObjectWalk, PackWriter
throws away the RevWalk that was passed in and makes a new one. The
cleared parent lists prepared by RevWalk.assumeShallow() are lost.
Fortunately UploadPack intends to pass in a DepthWalk.ObjectWalk.
It tries to create it by calling toObjectWalkWithSameObjects() on
a DepthWalk.RevWalk. But it doesn't work: because DepthWalk.RevWalk
does not override the standard RevWalk#toObjectWalkWithSameObjects
implementation, the result is a plain ObjectWalk instead of an
instance of DepthWalk.ObjectWalk.
The result is that the "shallow" information is thrown away and
objects reachable from the shallow commits can be omitted from the
pack sent when fetching with --depth from a shallow clone.
Multiple factors collude to limit the circumstances under which this
bug can be observed:
1. Commits with depth != 0 don't enter DepthGenerator's pending queue.
That means a "have" cannot have any effect on DepthGenerator unless
it is also a "want".
2. DepthGenerator#next() doesn't call carryFlagsImpl(), so the
uninteresting flag is not propagated to ancestors there even if a
"have" is also a "want".
3. JGit treats a depth of 1 as "1 past the wants".
Because of (2), the only place the UNINTERESTING flag can leak to a
shallow commit's parents is in the carryFlags() call from
markUninteresting(). carryFlags() only traverses commits that have
already been parsed: commits yet to be parsed are supposed to inherit
correct flags from their parent in PendingGenerator#next (which
doesn't happen here --- that is (2)). So the list of commits that have
already been parsed becomes relevant.
When we hit the markUninteresting() call, all "want"s, "have"s, and
commits to be unshallowed have been parsed. carryFlags() only
affects the parsed commits. If the "want" is a direct parent of a
"have", then it carryFlags() marks it as uninteresting. If the "have"
was also a "shallow", then its parent pointer should have been null
and the "want" shouldn't have been marked, so we see the bug. If the
"want" is a more distant ancestor then (2) keeps the uninteresting
state from propagating to the "want" and we don't see the bug. If the
"shallow" is not also a "have" then the shallow commit isn't parsed
so (2) keeps the uninteresting state from propagating to the "want
so we don't see the bug.
Here is a reproduction case (time flowing left to right, arrows
pointing to parents). "C" must be a commit that the client
reports as a "have" during negotiation. That can only happen if the
server reports it as an existing branch or tag in the first round of
negotiation:
A <-- B <-- C <-- D
First do
git clone --depth 1 <repo>
which yields D as a "have" and C as a "shallow" commit. Then try
git fetch --depth 1 <repo> B:refs/heads/B
Negotiation sets up: have D, shallow C, have C, want B.
But due to this bug B is marked as uninteresting and is not sent.
Change-Id: I6e14b57b2f85e52d28cdcf356df647870f475440
Signed-off-by: Terry Parker <tparker@google.com>
The bundle org.eclipse.jgit.java7 was removed in 4.0.
Remove references to it from the README.md.
Remove reference to it from org.eclipse.jgit.test/.project, which
causes an error message when opening the project in Eclipse:
Resource '/org.eclipse.jgit.java7' does not exist.
Change-Id: If0dbd562dcd60550bec3c0f793289474b7624bce
Signed-off-by: David Pursehouse <david.pursehouse@gmail.com>
When doing an incremental fetch from JGit, "have" commits are marked
as "uninteresting". In a non-shallow fetch, when the RevWalk hits an
"uninteresting" commit it marks the commit's corresponding tree as
uninteresting. That has the effect of dropping those trees and all the
trees and blobs they reference out of the thin pack returned to the
client.
However, shallow fetches use a DepthWalk to limit the RevWalk, which
nearly always causes the RevWalk to terminate before encountering the
"have" commits. As a result the pack created for the incremental fetch
never encounters "uninteresting" tree objects and thus includes
duplicate objects that it knows the client already has.
Change-Id: I7b1f7c3b0d83e04d34cd2fa676f1ad4fec904c05
Signed-off-by: Terry Parker <tparker@google.com>
Previously jgit would attempt to clean git repositories that had not
been committed by calling a non-recursive delete on them, which would
fail as they are directories. This commit addresses that issue in the
following ways.
Repositories are skipped in a default clean, similarly to cgit and only
cleaned when the force flag is applied. When the force flag is applied
repositories are deleted using a recursive delete call. The force flag
and setForce method are added here to CleanCommand to support this
change.
Bug: 498367
Change-Id: Ib6cfff65a033d0d0f76395060bf76719e13fc467
Signed-off-by: Matthaus Owens <matthaus@puppetlabs.com>
This commit adds some test coverage to cleaning a repository with a
submodule, which did not previously exist.
Bug: 498367
Change-Id: Ia5c4e4cc53488800dd486f8556dc57656783f1c4
Signed-off-by: Matthaus Owens <matthaus@puppetlabs.com>
This prevents the warning:
Potential heap pollution via varargs parameter
The method doesn't do any casting of types that would cause the heap
pollution, so it should be safe to add @SafeVarArgs.
See [1] for information about this warning.
[1] http://stackoverflow.com/a/12462259/381622
Change-Id: Ic6d252915ea44b4f1c385afecb98906cd2c54382
Signed-off-by: David Pursehouse <david.pursehouse@gmail.com>
Christian Halstrick
Dave Borowitz
Shawn Pearce
David Pursehouse
Philipp Marx
Matthias Sohn
Kevin Corcoran
David Turner
Hugo Arès
Thomas Wolf
Andrey Loskutov
Martin Goellnitz
Stefan Beller
Masaya Suzuki
Terry Parker
Matthaus Owens