In the Config#StringReader we relied on ArrayIndexOutOfBoundsException
to detect the end of the input. Creation of exception with (deep) stack
trace can significantly degrade performance in case when we read
thousands of config files, like in the case when Gerrit reads all
external ids from the NoteDb.
Use the buf.length to detect the end of the input.
Change-Id: I12266f25751373a870ce3fa623cf2a95d882d521
Older JGit stored only milliseconds timestamps in the index. Newer
JGit may get finer timestamps from the file system. This leads to
slow index diffs when a new JGit runs against an index produced
by older JGit because many timestamps will differ and JGit will
then do many content checks. See [1].
Handle this migration case by only comparing milliseconds if the
index entry has only millisecond precision.
The inverse may also occur; also compare only milliseconds if the
file timestamp has only millisecond precision.
Do the same also for microsecond resolution. On Windows, NTFS may
provide 100ns resolution and may be used by external programs writing
the index, but Java's WindowsFileAttributes may provide only
microseconds.
File timestamp precision in Java depends not only on the Java APIs
used by different JGit versions but may also change when running the
same Java code on different VMs. And of course the resolution may
vary among operating and file systems. Moreover, timestamp precision
in the index depends on the program that wrote the index. Canonical
git may use a different resolution, maybe even different between git
versions.
[1] https://www.eclipse.org/forums/index.php/t/1100344/
Change-Id: Idfd08606c883cb98787b2138f9baf0cc89a57b56
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
If CheckStat is MINIMAL or timestamps have no nanosecond part
WorkingTreeIterator.compareMetaData only checks the second part of
timestamps and ignores nanoseconds which may have ended up in the index
by using native git.
If
fileLastModified.getEpochSecond() == cacheLastModified.getEpochSecond()
we currently proceed comparing fileLastModified and cacheLastModified
with full precision which is wrong since we determined that we detected
reduced timestamp resolution.
Fix this and also handle smudged index entries for CheckStat.MINIMAL.
Change-Id: I6149885903ac63d79b42d234cc02aa4e19578f3c
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Using buildifier from master branch and the command:
$ buildifier -r -lint fix -warnings all .
Change-Id: I19c8ff183081093cb73bed7221a78a91b6cba4dc
Signed-off-by: David Pursehouse <david.pursehouse@gmail.com>
Bazelisk is utility to switch to the right Bazel version, that we
used to have with Buck build tool: [1].
Bazelisk will download the right Bazel version only once and will use
it in subsequent calls:
$ bazelisk build :release
2019/06/06 16:22:15 Downloading \
https://releases.bazel.build/0.26.1/release/bazel-0.26.1-linux-x86_64...
Bazelisk is storing the binaries in user's cache directory: [2], e.g.
on Linux OS:
$ ls -1 ~/.cache/bazelisk/bin
bazel-0.26.1-linux-x86_64
* [1] https://github.com/bazelbuild/bazelisk
* [2] https://golang.org/pkg/os/#UserCacheDir
Change-Id: Ia9180fb75f8cc17a0a0232622cf33a13bfad6b60
Signed-off-by: David Ostrovsky <david@ostrovsky.org>
Check the bazel version using the checker from bazel_skylib, and
require at least version 0.17.1 which is the minimum version that
does not suffer from the Java API mismatch issue [1].
The implementation is borrowed from the Gerrit project.
[1] https://github.com/bazelbuild/bazel/issues/6027
Change-Id: I224250088a1f5072fcaa3ec81228f4d2cb8cb389
Signed-off-by: David Pursehouse <david.pursehouse@gmail.com>
* stable-5.0:
Prepare 4.11.10-SNAPSHOT builds
JGit v4.11.9.201909030838-r
Bazel: Update bazlets to the latest master revision
Bazel: Remove FileTreeIteratorWithTimeControl from BUILD file
BatchRefUpdate: repro racy atomic update, and fix it
Delete unused FileTreeIteratorWithTimeControl
Fix RacyGitTests#testRacyGitDetection
Change RacyGitTests to create a racy git situation in a stable way
Silence API warnings
Change-Id: I172136a031ff0730e575327cafb3527c9650a71d
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
* stable-4.11:
Prepare 4.11.10-SNAPSHOT builds
JGit v4.11.9.201909030838-r
Bazel: Update bazlets to the latest master revision
Bazel: Remove FileTreeIteratorWithTimeControl from BUILD file
BatchRefUpdate: repro racy atomic update, and fix it
Delete unused FileTreeIteratorWithTimeControl
Fix RacyGitTests#testRacyGitDetection
Change RacyGitTests to create a racy git situation in a stable way
Silence API warnings
Change-Id: Ifb6a4dbea2f48fd2ffa66eb737d61920aefedfbd
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
* stable-4.10:
Bazel: Update bazlets to the latest master revision
Bazel: Remove FileTreeIteratorWithTimeControl from BUILD file
BatchRefUpdate: repro racy atomic update, and fix it
Delete unused FileTreeIteratorWithTimeControl
Fix RacyGitTests#testRacyGitDetection
Change RacyGitTests to create a racy git situation in a stable way
Silence API warnings
Change-Id: If672b4f0c350f4e8ff7e1e706485cffd8137236d
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
* stable-4.9:
BatchRefUpdate: repro racy atomic update, and fix it
Delete unused FileTreeIteratorWithTimeControl
Fix RacyGitTests#testRacyGitDetection
Change RacyGitTests to create a racy git situation in a stable way
Silence API warnings
Change-Id: Id5bf44645655fca40ad22bb1f1ad20a7c2e8f6db
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
The latest revision includes various fixes to allow the build
to work with recent versions of Bazel.
Change-Id: I72c100b99762010946d9b2784286af560bbdf185
Signed-off-by: David Pursehouse <david.pursehouse@gmail.com>
FileTreeIteratorWithTimeControl was deleted in a024759, but was
not removed from the BUILD file, thus causing the bazel build to
fail.
Change-Id: I892c0ffcac947298d0d6009374ee2c5d9afefb66
Signed-off-by: David Pursehouse <david.pursehouse@gmail.com>
(cherry picked from commit e54fde8616)
PackedBatchRefUpdate was creating a new packed-refs list that was
potentially unsorted. This would be papered over when the list was
read back from disk in parsePackedRef, which detects unsorted ref
lists on reading, and sorts them. However, the BatchRefUpdate also
installed the new (unsorted) list in-memory in
RefDirectory#packedRefs.
With the timestamp granularity code committed to stable-5.1, we can
more often accurately decide that the packed-refs file is clean, and
will return the erroneous unsorted data more often. Unluckily timed
delays also cause the file to be clean, hence this problem was
exacerbated under load.
The symptom is that refs added by a BatchRefUpdate would stop being
visible directly after they were added. In particular, the Gerrit
integration tests uses BatchRefUpdate in its setup for creating the
Admin group, and then tries to read it out directly afterward.
The tests recreates one failure case. A better approach would be to
revise RefList.Builder, so it detects out-of-order lists and
automatically sorts them.
Fixes https://bugs.eclipse.org/bugs/show_bug.cgi?id=548716 and
https://bugs.chromium.org/p/gerrit/issues/detail?id=11373.
Bug: 548716
Change-Id: I613c8059964513ce2370543620725b540b3cb6d1
Signed-off-by: Han-Wen Nienhuys <hanwen@google.com>
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
The only usage of this test iterator was removed in df637928d. Hence
delete this iterator and associated test.
Change-Id: I47710133ec3edc675c21db210960c024982668c6
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
(cherry picked from commit a024759cf5)
This test case assumed file system timestamp resolution of 1 second. On
filesystems with a finer resolution this test fails since the index
entry is only smudged if the file index entry's lastModified and the
lastModified of the git index itself are within the same filesystem
timer tick. Fix this by ensuring that these timestamps are identical
which should work for any filesystem timer resolution.
Bug: 548188
Change-Id: Id84d59e1cfeb48fa008f8f27f2f892c4f73985de
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Signed-off-by: Christian Halstrick <christian.halstrick@sap.com>
(cherry picked from commit 1159f9dd7c)
By using File#setLastModified, we can create a racy git situation
stably.
Tested with --runs_per_test=100
Bug: 526111
Change-Id: I60b3632d353e19f335668325aa603640be423f58
Signed-off-by: Masaya Suzuki <masayasuzuki@google.com>
(cherry picked from commit df637928d2)
Move the handling of cached user and system config to getSystemConfig
and getUserConfig methods and revert the implementation of
openSystemConfig and openUserConfig to the old stateless
implementation.
This ensures the open methods respect the passed-in parent config, which
may be different on each invocation. Additionally, returning a new
instance matches the behavior of the previous implementation of the
default system reader, which downstream callers may be depending on.
Move the implementation of the new caching methods getSystemConfig and
getUserConfig up to SystemReader. This avoids that we break the ABI for
subclasses of SystemReader.
Also see [1] which fixed a similar problem with Gerrit's custom
SystemReader.
[1] https://gerrit-review.googlesource.com/c/gerrit/+/225458
Change-Id: If54a2491932d8fc914d4649cb73c9e837c5b8ad0
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
This ensures that only one instance of user and one instance of system
config is set.
Change-Id: Idd00150f91d2d40af79499dd7bf8ad5940f87c4e
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
deleteChildren was called on directory instead of gitDir, leading to a
potential null pointer exception if the git directory existed initially.
Bug: 550340
Change-Id: Iafc3b2961253a99862a59e81c7371f7bc564b412
Signed-off-by: Adrien Bustany <adrien-xx-eclipse@bustany.org>
Ensure we use the same type when comparing seconds since the epoch.
This does not prevent that in 2038 timestamps in seconds since the epoch
stored in a 32 bit integer will overflow. Integer.MAX_VALUE translates
to 2038-01-19T03:14:07Z. After this date we'll have an issue since we
store seconds since the epoch in a 32 bit integer in some places.
Bug: 319142
Change-Id: If0c03003d40b480f044686e2f7a2f62c9f4e2fe1
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Replace the two int variables smudge_s and smudge_ns by an Instant and
use the new method DirCacheEntry.mightBeRacilyClean(Instant).
Change-Id: Id70adbb0856a64909617acf65da1bae8e2ae934a
Signed-off-by: Michael Keppler <Michael.Keppler@gmx.de>
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Matthias Sohn
David Pursehouse
Saša Živkov
Thomas Wolf
David Ostrovsky
Han-Wen Nienhuys
Masaya Suzuki
Adrien Bustany
Michael Keppler