Decorators need to know whether folders in the working tree contain only
untracked files. This change enhances IndexDiffFilter to report such
folders. This works only together with treewalks which operate in
default traversal mode. For treewalks which process entries in
postorder mode (files are walked before their parent folder is walked)
this detection doesn't work.
Bug: 359264
Change-Id: I9298d1e3ccac0aec8bbd4e8ac867bc06a5c89c9f
Signed-off-by: Christian Halstrick <christian.halstrick@sap.com>
Signed-off-by: Jens Baumgart <jens.baumgart@sap.com>
Signed-off-by: Chris Aniszczyk <zx@twitter.com>
Mark the treeWalk as recursive; otherwise following renames only works
for toplevel files.
Bug: 302549
Change-Id: I70867928eadf332b0942f8bf6877a3acb3828c87
Signed-off-by: Carsten Pfeiffer <carsten.pfeiffer@gebit.de>
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Signed-off-by: Chris Aniszczyk <zx@twitter.com>
Refactored the three common transport configuration options:
credentials provider, timeout, and transport config callback
into a new TransportCommand base class which is now extended
by all commands that use a Transport object during execution.
Bug: 349188
Change-Id: I90c2c14fb4e3cc4712905158f9047153a0c235c2
Signed-off-by: Kevin Sawicki <kevin@github.com>
Signed-off-by: Chris Aniszczyk <zx@twitter.com>
A few places were still using GitIndex. Replacing it was fairly
simple, but there is a difference in test outcome in
ReadTreeTest.testUntrackedConflicts. I believe the new behavior
is good, since we do not update neither the index, not the worktree.
Change-Id: I4be5357b7b3139dded17f77e07a140addb213ea7
Signed-off-by: Robin Rosenberg <robin.rosenberg@dewire.com>
This includes merging ReadTreeTest into DirCacheCheckoutTest and
converting IndexDiffTest to use DirCache only. The GitIndex specific
T0007GitIndex test remains.
GitIndex is deprecated. Let us speed up its demise by focusing the
DirCacheCheckout tests to using DirCache instead.
This also add explicit deprecation comments to methods that depend
on GitIndex in Repository and TreeEntry. The latter is deprecated in
itself.
Change-Id: Id89262f7fbfee07871f444378f196ded444f2783
Signed-off-by: Robin Rosenberg <robin.rosenberg@dewire.com>
Any RuntimeException or Error in this block will leave the lock
held by the caller thread, which can later result in deadlock or
just cache requests hanging forever because they cannot get to
the lock object.
Wrap everything in try/finally to prevent the lock from hanging,
even though a RuntimeException or Error should never happen in
any of these code paths.
Change-Id: Ibb3467f7ee4c06f617b737858b4be17b10d936e0
The cache starts with a single empty Ref that has no data, as the
clock list does not support being empty. When this Ref is removed,
the size has to be decremented from the associated DfsPackKey,
which was previously null. Make it always be non-null.
Change-Id: I2af99903e8039405ea6d67f383576ffa43839cff
Most unexpected exceptions are completely useless yielding message
like "null" or "3" or in the best cases something reasonable, but
still out of context.
Just declare the test as throwing an exception. That will retain
the full stack trace leading to the point of failure without using
a debugger or changing the code.
Change-Id: Id2454d328d1aa665606ae002de2c3805fe7baa8e
* changes:
DfsBlockCache: Update hits to not include contains()
Add a listener for changes to a DfsObjDatabase's pack files
Expose the reverse index size in the DfsPackDescription
Add a DfsPackFile method to get the number of cached bytes
Expose the list of pack files in the DfsBlockCache
Add a DFS repository description and reference it in each pack
Clarify the docstring of DfsBlockCache.reconfigure()
DFS: A storage layer for JGit
Intended for cross-request use, so only refers to
DfsRepositoryDescriptions rather than DfsRepositorys.
Change-Id: I2633e472c9264d91d632069f608d53d4bdd0fc09
Callers may want to inspect the contents of the cache, which this allows
them to do in a read-only fashion without any locking.
Change-Id: Ifd78e8ce34e26e5cc33e9dd61d70c593ce479ee0
Just as DfsPackDescription describes a pack but does not imply it is
open in memory, a DfsRepositoryDescription describes a repository at a
basic level without it necessarily being open.
Change-Id: I890b5fccdda12c1090cfabf4083b5c0e98d717f6
The docstring was copied from the local filesystem cache code, which
actually attempted to reconfigure the cache on the fly. The DFS cache is
designed to be "reconfigured" exactly once.
Change-Id: Ia0b01f5d6b6b3d3a68d65a5c229ff67c1cede5bc
In practice the DHT storage layer has not been performing as well as
large scale server environments want to see from a Git server.
The performance of the DHT schema degrades rapidly as small changes
are pushed into the repository due to the chunk size being less than
1/3 of the pushed pack size. Small chunks cause poor prefetch
performance during reading, and require significantly longer prefetch
lists inside of the chunk meta field to work around the small size.
The DHT code is very complex (>17,000 lines of code) and is very
sensitive to the underlying database round-trip time, as well as the
way objects were written into the pack stream that was chunked and
stored on the database. A poor pack layout (from any version of C Git
prior to Junio reworking it) can cause the DHT code to be unable to
enumerate the objects of the linux-2.6 repository in a completable
time scale.
Performing a clone from a DHT stored repository of 2 million objects
takes 2 million row lookups in the DHT to locate the OBJECT_INDEX row
for each object being cloned. This is very difficult for some DHTs to
scale, even at 5000 rows/second the lookup stage alone takes 6 minutes
(on local filesystem, this is almost too fast to bother measuring).
Some servers like Apache Cassandra just fall over and cannot complete
the 2 million lookups in rapid fire.
On a ~400 MiB repository, the DHT schema has an extra 25 MiB of
redundant data that gets downloaded to the JGit process, and that is
before you consider the cost of the OBJECT_INDEX table also being
fully loaded, which is at least 223 MiB of data for the linux kernel
repository. In the DHT schema answering a `git clone` of the ~400 MiB
linux kernel needs to load 248 MiB of "index" data from the DHT, in
addition to the ~400 MiB of pack data that gets sent to the client.
This is 193 MiB more data to be accessed than the native filesystem
format, but it needs to come over a much smaller pipe (local Ethernet
typically) than the local SATA disk drive.
I also never got around to writing the "repack" support for the DHT
schema, as it turns out to be fairly complex to safely repack data in
the repository while also trying to minimize the amount of changes
made to the database, due to very common limitations on database
mutation rates..
This new DFS storage layer fixes a lot of those issues by taking the
simple approach for storing relatively standard Git pack and index
files on an abstract filesystem. Packs are accessed by an in-process
buffer cache, similar to the WindowCache used by the local filesystem
storage layer. Unlike the local file IO, there are some assumptions
that the storage system has relatively high latency and no concept of
"file handles". Instead it looks at the file more like HTTP byte range
requests, where a read channel is a simply a thunk to trigger a read
request over the network.
The DFS code in this change is still abstract, it does not store on
any particular filesystem, but is fairly well suited to the Amazon S3
or Apache Hadoop HDFS. Storing packs directly on HDFS rather than
HBase removes a layer of abstraction, as most HBase row reads turn
into an HDFS read.
Most of the DFS code in this change was blatently copied from the
local filesystem code. Most parts should be refactored to be shared
between the two storage systems, but right now I am hesistent to do
this due to how well tuned the local filesystem code currently is.
Change-Id: Iec524abdf172e9ec5485d6c88ca6512cd8a6eafb
Actually this is not ok according to the RFC, but this implementation is
ment to be Git compatible. A '\' is needed when the authentication
requires or allows authentication to a Windows domain where the
user name can be specified as DOMAIN\user.
Change-Id: If02f258c032486f1afd2e09592a3c7069942eb8b
Open a repository for submodule entries that have a child .git
directory and use the resolved HEAD commit as the entry's id.
Change-Id: I68d6e127f018b24ee865865a2dd3011a0e21453c
Signed-off-by: Kevin Sawicki <kevin@github.com>
The system property jgit.cygpath must be set to true in order
for cygwin's cygpath to be used to translate path from cygwin
namespace to Windows namespace.
The cygwin path translation should be considered deprecated.
Bug: 353389
Change-Id: I2b5234c0ab936dac67d1e232f4cd28331bf3226d
Signed-off-by: Robin Rosenberg <robin.rosenberg@dewire.com>
* changes:
Cosmetic adjustment of relative date format, do not display "0 months"
Make use of the many date formatting options in the log command
Define a utility class for handling Git date formats
Though it may seem less precise, "0 months" looks bad and the reference
Git implementation also does not display "0 months"
Change-Id: I488e9c97656f9941788ae88d7c5c1562ab6c26f0
The egit history view shows the files associated with a commit by using
a PathFilter. When following renames with a FollowFilter, the PathFilter
cannot be configured anymore because the affected files are simply not
known.
Thus, it should be possible to get to know which files are renamed.
Bug: 302549
Change-Id: I4761e9f5cfb4f0ef0b0e1e38991401a1d5003bea
Introducing a new abstract method is not nice when one
expects other to subclass them. Create default implementations
so old code that implements SystemReader does not break.
The default methods just delegate to the JVM.
Change-Id: I42cdfdcb6b29f7203697a23833dca85185b0b9b3
Signed-off-by: Robin Rosenberg <robin.rosenberg@dewire.com>
Besides the formats known by git-log(1) we also add "locale"
and "localelocal" that formats dates according to the user's locale.
"locale" does not translate into local timezone, while
localelocal does.
Change-Id: I1c088dcec992c107e43f6c17be4ac9ed6eb428bf
We deleted the entry if there was a file and an index
entry, but not when there was just an index entry. Now
delete the file in both cases since the missing file
just means our worktree is dirty. This affected the
implementation of reset --hard.
Bug: 347574
Change-Id: Ie66fa61303472422830f5e33614e93ad65094e5d
Jens Baumgart
Carsten Pfeiffer
Kevin Sawicki
Robin Rosenberg
Christian Halstrick
Shawn O. Pearce
Colby Ranger
Dave Borowitz
Carl Myers
Marc Strapetz
Matthias Sohn