From the javadoc for Files.list:
"The returned stream encapsulates a DirectoryStream. If timely disposal
of file system resources is required, the try-with-resources construct
should be used to ensure that the stream's close method is invoked
after the stream operations are completed."
This is the only call to Files#newDirectoryStream that is not already in
a try-with-resources.
Change-Id: I91e6c56b5d74e8435457ad6ed9e6b4b24d2aa14e
(cherry picked from commit 1c16ea4601)
* stable-4.9:
Retry stale file handles on .git/config file
Change-Id: I6db7256dbd1c71b23e1231809642ca21e996e066
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
On a local non-NFS filesystem the .git/config file will be orphaned if
it is replaced by a new process while the current process is reading the
old file. The current process successfully continues to read the
orphaned file until it closes the file handle.
Since NFS servers do not keep track of open files, instead of orphaning
the old .git/config file, such a replacement on an NFS filesystem will
instead cause the old file to be garbage collected (deleted). A stale
file handle exception will be raised on NFS clients if the file is
garbage collected (deleted) on the server while it is being read. Since
we no longer have access to the old file in these cases, the previous
code would just fail. However, in these cases, reopening the file and
rereading it will succeed (since it will open the new replacement file).
Since retrying the read is a viable strategy to deal with stale file
handles on the .git/config file, implement such a strategy.
Since it is possible that the .git/config file could be replaced again
while rereading it, loop on stale file handle exceptions, up to 5 extra
times, trying to read the .git/config file again, until we either read
the new file, or find that the file no longer exists. The limit of 5 is
arbitrary, and provides a safe upper bounds to prevent infinite loops
consuming resources in a potential unforeseen persistent error
condition.
Change-Id: I6901157b9dfdbd3013360ebe3eb40af147a8c626
Signed-off-by: Nasser Grainawi <nasser@codeaurora.org>
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
These problem usually occur when you subclass ThreadLocal (usually to
implement initialValue). Those classes reference the webapp's
classloader. The ThreadLocal subclass in turn is referenced by each
Thread instance (that's how ThreadLocals are implemented, they have a
"helper-Map" in each Thread instance, so the leak is actually not a tiny
Random instance but the whole webapp's classloader with a bunch of class
definitions and statically referenced parts of the webapp.
Bug: 449321
Change-Id: Ie7a8b0b90e40229e2471202f2a12637b9e0b1d11
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
* stable-4.9:
Fix ssh host name handling for Jsch
Jsch overrides the port in the URI with the one in ~/.ssh/config
Change-Id: Iff9076f65e767bbe8df016337b631bdaeb40ad98
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
If we give Jsch access to the ssh config file, we must _not_ resolve
the host name from the alias. Instead we must give the alias (i.e.,
the host name as is in the URI) to Jsch, so that it finds the same
ssh config entry.
Otherwise if the hostname in the URI, which is taken as an alias in
ssh config ("Host" line), is unequal to the "Hostname" line, and
there happens to be another ssh config entry with that translated
host name as alias, Jsch will pick up that second entry, and we end
up with a strange mixture of both.
Add tests for this case.
Bug: 531118
Change-Id: I249d8c073b0190ed110a69dca5b9be2a749822c3
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
Jsch unconditionally overwrites the port from the ssh config
file (if a port is specified there), even if the URI explicitly does
give a different port.
Fix this, and add tests.
Change-Id: I7b014543c7ece26270e366db39d7647f82d64f0d
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
* stable-4.9:
Minor fixes in three error messages
Change-Id: Ibd6bcecb40a6d97c46c66360020dca7453876298
Signed-off-by: David Pursehouse <david.pursehouse@gmail.com>
* Fix "can not" -> "cannot" in two messages
* Re-word "Cannot mkdir" to "Cannot create directory"
Change-Id: Ide0cec55eeeebd23bccc136257c80f47638ba858
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
Jsch caches keys (aka identities) specified in ~/.ssh/config via
IndentityFile only for the current Jsch Session. This results in
multiple password prompts for successive sessions.
Do the handling of IdentityFile exclusively in JGit, as it was before
4.9. JGit uses different Jsch instances per host and caches the
IdentityFile there, allowing it to be re-used in different sessions
for the same host.
* Add comments to explain this.
* Move the JschBugFixingConfig from OpenSshConfig to
JschConfigSessionFactory to have all these Jsch work-arounds
in one place.
* Make that config hide the IdentityFile config from Jsch to avoid
that Jsch overrides the JGit behavior.
Bug: 529173
Change-Id: Ib36c34a2921ba736adeb64de71323c2b91151613
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
Change-Id: Iaaefc2cbafbf083d6ab158b1c378ec69cc76d282
Signed-off-by: David Turner <dturner@twosigma.com>
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
When a submodule is moved, the "name" field remains the same, while
the "path" field changes. Git uses the "name" field in .git/config
when a submodule is initialized, so this patch makes JGit do so too.
Change-Id: I48d8e89f706447b860c0162822a8e68170aae42b
Signed-off-by: David Turner <dturner@twosigma.com>
This prepares builds on Java 9 [1].
The maven 2 tag "prerequisites" is not honored by maven 3
hence use maven-enforcer-plugin to enforce the minimum
maven version.
[1] https://issues.apache.org/jira/browse/MNG-6148
Change-Id: I57f5051a0641b1bd21f9f888f1a17d8f98e879e5
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
* stable-4.9:
Strings#convertGlob: fix escaping of patterns like [\[].
Change-Id: I18d55537002b3153db35f8a6b60f2f5317d17248
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Originally the patterns were escaped twice leading
to wrong matching results.
Bug: 528886
Change-Id: I26e201b4b0ef51cac08f940b76f381260fa925ca
Signed-off-by: Dmitry Pavlenko <pavlenko@tmatesoft.com>
Signed-off-by: David Pursehouse <david.pursehouse@gmail.com>
* changes:
ConfigTest: Add some additional comment parsing tests
Config: Drop backslash in invalid escape sequences in subsections
Config: Match C git behavior more closely in escaping values
The intent with the setCompressionLevel and checkExisting methods (which
are already public) is for callers to be able to call them, but they
can't do that if the class itself is not public.
Change-Id: I014044fec3bfa1d33775500345efd60eb5d45bde
These are ignored by C git when parsing:
$ git config -f - --list <<EOF
[foo "x\0y"]
bar = baz
[foo "x\qy"]
bar = baz
[foo "x\by"]
bar = baz
[foo "x\ny"]
bar = baz
[foo "x\ty"]
bar = baz
EOF
foo.x0y.bar=baz
foo.xqy.bar=baz
foo.xby.bar=baz
foo.xny.bar=baz
foo.xty.bar=baz
This behavior is different from value parsing, where an invalid escape
sequence is an error (which JGit already does as well):
$ git config -f - --list <<EOF
[foo]
bar = x\qy
EOF
fatal: bad config line 2 in standard input
Change-Id: Ifd40129b37d9a62df3d886d8d7e22f766f54e9d1
This profile isn't needed any longer since we require Java 8 as minimum
version.
Change-Id: I8a37eaf874473ff4004b9c074a810dddebde54c8
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
David Pursehouse
Dave Borowitz
Matthias Sohn
Nasser Grainawi
Thomas Wolf
Marc Strapetz
David Turner
Karsten Thoms
Dmitry Pavlenko