These methods allow to find all configuration entry names for a given
section or section/subsection searching recursively through all base
configurations of the given configuration.
These methods are needed to calculate the names for the effective
configuration of a git repository which combines the configuration entry
names found in the repository, global and system configuration files
Bug: 396659
Change-Id: Ie3731b5e877f8686aadad3f1a46b2e583ad3b7c6
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
This feature was introduced in native git with version 1.8.4.
Bug: 422951
Change-Id: I42f194174d64d7ada6631e2156c2a7bf93b5e91c
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Instead of just a generic "Invalid path: $path", add a reason for the
cases where it's not obvious what the problem is (e.g. "aux" being
reserved on Windows).
Bug: 413915
Change-Id: Ia6436bd2560e4f049c92d9aac907cb87348605e0
Signed-off-by: Robin Stocker <robin@nibor.org>
The matcher has to be reset before using it, as was already done in the
other cases.
Bug: 423039
Change-Id: I87abaa7ad7f0aac8651db6e88d41427cacb4d776
Also-by: Ondrej Vrabec <ovrabec@netbeans.org>
Signed-off-by: Robin Stocker <robin@nibor.org>
When there are conflicts with a recursive merge, the conflicting paths
are stored in unmergedPaths (field in ResolveMerger). Later, when the
MergeResult is constructed in MergeCommand, getBaseCommit is called,
which computes the merge base a second time.
In case of RecursiveMerger, getBaseCommit merges the multiple merge
bases into one. It does this not by creating a new ResolveMerger but
instead calling mergeTrees. The problem with mergeTrees is that at the
end, it checks if unmergedPaths is non-empty and returns false in that
case.
Because unmergedPaths was already non-empty because of the real merge,
it thinks that there were conflicts when computing the merge base again,
when there really were none.
This can be fixed by storing the base commit when computing it and then
returning that instead of computing it a second time.
Note that another possible fix would be to just use a new ResolveMerger
for merging the merge bases instead. This would also remove the need to
remember the old value of dircache, inCore and workingTreeIterator (see
RecursiveMerger#getBaseCommit).
Bug: 419641
Change-Id: Ib2ebf4e177498c22a9098aa225e3cfcf16bbd958
Signed-off-by: Robin Stocker <robin@nibor.org>
Bad files from symbolic links were being generated on Cygwin and
required resolution by the appropriate FS. Pass FS to getSymRef and call
FS.resolve before asking if the file is absolute.
Bug: 419494
Change-Id: I74aa7a285954cade77f41df6f813b6dafb5d6cd7
Signed-off-by: John Ross <jwross@us.ibm.com>
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
With this change jgit checks for uncommitted changes before a rebase is
started. This is also done by native git. One reason is that an abort
would override such changes. The check is skipped for a non-interactive
rebase when it will result in a fast-forward. In this case there can be
only checkout conflicts but no merge conflicts, so there cannot be an
abort which overrides uncommitted changes.
Bug: 422352
Change-Id: I1e0b59b2a4d80a686b67a6729e441924362b1236
Signed-off-by: Stefan Lay <stefan.lay@sap.com>
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
JGit was not handling certain file/folder conflicts during a checkout
correctly. This was reported by Axel Richard in
http://dev.eclipse.org/mhonarc/lists/jgit-dev/msg02358.html.
This commit fixes this problem.
Still JGit behaves intentionally different than native git.
If HEAD contains a tree, and workingtree, Index and Merge contain a file
with same content ... then JGit allows a conflict free checkout of
Merge. Native git always complains that it doesn't want to overwrite
local changes. But there is no need to update the working tree because
Index and Merge are already equal.
A shell script which shows how native git behaves can be found here.
https://gist.github.com/chalstrick/7694959#file-gistfile1-sh
Change-Id: Ifd6a68974d61cd4fa23bc575f3a40773db66cafc
Signed-off-by: Christian Halstrick <christian.halstrick@sap.com>
Applying a stash on another commit failed because the merge base for the
cherry-pick of the stashed index state was not corectly set.
Bug: 422684
Change-Id: I9355352b2b9a7abefa3248ca3c17a9301177d0d6
Signed-off-by: Stefan Lay <stefan.lay@sap.com>
Otherwise switching to another locale yields wrong results when parsing
date strings in GitDateParser. Since the MockSystemReader explicitly
uses english locale the tests need to specify the locale to be used when
parsing date strings.
Bug: 420772
Change-Id: I313ef6b1e9ef3bfb43d929ce34712ebd21f2cd9c
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Empty lines of discarded commit messages were added to the commit
message because they were not commented out properly.
Bug: 422246
Change-Id: I263e8a6b30a3392d8b4f09c0695505068a0a485d
Signed-off-by: Stefan Lay <stefan.lay@sap.com>
The API in org.eclipse.jgit.api does allow to open repositories but it
did not allow to close them. This commit fixes this and allows
API users to close a repository without having to use lower-level
classes.
Bug: 420502
Change-Id: I866225cc8534ae5916113fa24eb1c7513fd4472e
Signed-off-by: Christian Halstrick <christian.halstrick@sap.com>
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
DfsPackFile.isIndexLoaded() uses the DfsBlockCache.Ref.get() method
to check if the index loaded. However, using the get() method marks
a hot bit in the cache, which can cause the index to never be unloaded
and seem hotter than it really is. Add a has() method which only
checks if the value is not null and does not update the hot bit.
Change-Id: I7e9ed216f6e273e8f5d79ae573973197654419b4
If during an garbage collection old packfiles are deleted it could
happen that on certain platforms the index file can be deleted but the
packfile can't be deleted (because someone locked the file). This led
to repositories with packfiles without corresponding index files. Those
zombie-packfiles potentially consume a lot of space on disk and it is
never tried to delete them again. Try to avoid this situation by
deleting packfiles first and don't try to delete the other files if we
can't delete the packfile. This gives us the chance to delete the
packfile during next GC.
This commit only improves the situation - there is still the chance for
orphan files during packfile deletion. We don't have an atomic delete
of multiple files .
Change-Id: I0a19ae630186f07d0cc7fe9df246fa1cedeca8f6
This silences some discouraged access warnings issued since
TestRepository uses PackWriter which is in an internal package.
Change-Id: Ic9c4631e237c2fe1996c518328ecc2a9ab5c348b
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
If a commit was marked for edit, reword, squash or fixup, but the
interactive rebase stopped because of a conflict, the step was not done
after conflict resolution. This is done now.
Change-Id: If8e7ccc50469165744f2b8a53d180f9ba0f72330
Signed-off-by: Stefan Lay <stefan.lay@sap.com>
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
When the last step was an edit step, rebase interactive did not finish
after continuing the rebase. Instead, it returned with the status
FAST_FORWARD.
Change-Id: Ib19857474ac089dfeaae665ad5e95c66c21099b0
With the new RebaseResult.EDIT a client can now distinguish if rebase
stopped due to a conflict or because the commit was marked for edit in
an interactive rebase.
Change-Id: I40f2311cf43ed5f290dcda65a7bd85ba770a85f5
Signed-off-by: Stefan Lay <stefan.lay@sap.com>
The rebase command now supports squash and fixup. Both actions are not
allowed as the first step of the rebase.
In JGit, before any rebase step is performed, the next commit is
already cherry-picked. This commit keeps that behaviour. In case of
squash or fixup a soft reset to the parent is perfomed afterwards.
CQ: 7684
Bug: 396510
Change-Id: I3c4190940b4d7f19860e223d647fc78705e57203
Signed-off-by: Tobias Pfeifer <to.pfeifer@web.de>
Signed-off-by: Stefan Lay <stefan.lay@sap.com>
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
This should prevent class cast problems caused by jgit and egit bundles
wiring to different versions of com.jcraft.jsch.
Bug: 420903
Change-Id: Icabe40209ea07369e2b7eee31952d131aef3fbf1
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Add Operation.PROCESS_STEPS to RebaseCommand to enable starting
interactive rebase explicitly after rebase steps have been configured.
Change-Id: I2d6f0de82010ea6523fbce6fb4501e847bdcdddc
Signed-off-by: Tobias Pfeifer <to.pfeifer@web.de>
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Checking of spaces at the end of the file name caused the
test to fail for Windows only.
Bug: 396662
Change-Id: I47bcccb0fa32ce606276c3f30d454851d115ca11
Signed-off-by: Robin Rosenberg <robin.rosenberg@dewire.com>
A rebase todo file consists of regular non-comment action lines and
comment lines. In case that a regular action line has been commented out
(i.e. prefixed with a hash '#'), the RebaseTodoLine that is representing
this line should hold the values for commitId and shortMessage even
though it's a comment line. This allows to switch between comment and
non-comment easily even after the file has been persisted and reread.
Change-Id: I56ec2ba08eaf3772e2d74d937dd496209a744d4b
Signed-off-by: Tobias Pfeifer <to.pfeifer@web.de>
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Reading and writing files formatted like the git-rebase-todo files was
hidden in the RebaseCommand. Certain constructs (like leading tabs and
spaces) have not been handled as in native git. Also the upcoming
rebase interactive feature in EGit needs reading/writing these files
independently from a RebaseCommand.
Therefore reading and writing those files has been moved to the
Repository class. RebaseCommand gets smaller because of that and doesn't
have to deal with reading/writing files.
Additional tests for empty todo-list files, or files containing comments
have been added.
Change-Id: I323f3619952fecdf28ddf50139a88e0bea34f5ba
Signed-off-by: Christian Halstrick <christian.halstrick@sap.com>
Also-by: Tobias Pfeifer <to.pfeifer@sap.com>
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
This allows subclasses to configure the HTTP connection (for example,
to add headers to the request).
Bug: 400724
Change-Id: I6f9d699e158a7b9d813c8fa8d273992a28994e41
Signed-off-by: Michael Nelson <michael.nelson@tasktop.com>
Signed-off-by: Chris Aniszczyk <caniszczyk@gmail.com>
Otherwise the MockSystemReader from the test setup is active for other
tests.
Change-Id: I7caf693bd692d06936e29efd4dc4aabb48c1c39b
Signed-off-by: Robin Stocker <robin@nibor.org>
IOException did not add a (String, Throwable) constructor until 1.5.
Instead use the String super constructor and initCause to initialize
the exception.
Fixes bug 418889
Change-Id: Ide735ecfc7d04884981b79b57a4275863ce17006
ServiceMayNotContinueException usually wraps an underlying exception.
Add convenience constructors that take Throwable. In the case a
string is not provided, the message defaults to "internal server error",
since it may be reported to the client.
Change-Id: I15dc20306826c352f69e88afb7ed6927c12b6c1f
Currently, Repository.getAllRefs() and Repository.getTags() silently
ignores an IOException and instead returns an empty map. Repository
is a public API and as such cannot be changed until the next major
revision change. Where possible, update the internal jgit APIs to
use the RefDatabase directly, since it propagates the error.
Change-Id: I4e4537d8bd0fa772f388262684c5c4ca1929dc4c
Matthias Sohn
Stefan Lay
Robin Stocker
John Ross
Christian Halstrick
Colby Ranger
Tobias Pfeifer
Shawn Pearce
Robin Rosenberg
Michael Nelson