* changes:
Prune UNREACHABLE_GARBAGE packs when they expire
Use try-with-resources in DfsGarbageCollector.writePack
Fix lastModified to be consistent in DfsGarbageCollector
Add GC_REST PackSource to better order DFS packs
DfsGarbageCollector will now enforce a maximum time to live (TTL) for
UNREACHABLE_GARBAGE packs. The default TTL is 1 day, which should be
enough time to avoid races with other processes that are inserting
data into the repository.
Change-Id: Id719e6e2a03cfc9a0c0aef8ed71d261dda14bd0c
Signed-off-by: Mike Williams <miwilliams@google.com>
Set all packs written by the DfsGarbageCollector to use the same
starting timestamp as lastModified. This makes it easier to see
which packs came from the same DfsGarbageCollector run, as they
share the same timestamp.
Change-Id: Id633573fbc3f0f360887b4745cacf33d6fc09320
Force reads to use a search ordering of:
INSERT / RECEIVE
COMPACT
GC (heads)
GC_REST (non-heads)
GC_TXN (refs/txn)
UNREACHABLE_GARBAGE
This has provided decent performance for object lookups. Starting
from an arbitrary reference may find the content in a newer pack
created by DfsObjectInserter or a ReceivePack server. Compaction of
recent packs also contains newer content, and then most interesting
data is in the "main" GC pack. As the GC pack is self-contained (has
no edges leading outside) readers typically do not need to go further.
Adding a new GC_REST PackSource allows the DfsGarbageCollector to
identify to the pack ordering code which pack is which, so the
non-heads are scanned second during reads. This removes a hack that
was unique to Google's implementation that enforced this behavior by
fixing up the lastModified timestamp.
Renumber the PackSource's categories to reflect this search ordering.
Change-Id: I19fdaab8a8d6687cbe8c88488e6daa0630bf189a
Treewalk has a member 'attr' which caches the attributes for the current
entry. We did not reset the cache always when moving to next entry. The
effect was that when there are no attributes for an entry 'a' but 'a'
was skipped by a Treewalk filter then Treewalk stopped looking for
attributes until TreeWalk.next() was called again.
Change-Id: Ied39b7fb5f56afe7a237da17801003d0abe6b1c7
Problem occurs when the checkout wants to create a file 'd/f' but
the workingtree contains a dirty file 'd'. In order to create d/f the
file 'd' would have to be deleted and since the file is dirty that
content would be lost. This should lead to a CheckoutConflictException
for d/f when failOnConflict was set to true.
This fix also changes jgit checkout semantics to be more like native
gits checkout semantics. If during a checkout jgit wants to delete a
folder but finds that the working tree contains a dirty file at this
path then JGit will now throw an exception instead of silently keeping
the dirty file. Like in this example:
git init
touch b
git add b
git commit -m addB
mkdir a
touch a/c
git add a/c
git commit -m addAC
rm -fr a
touch a
git checkout HEAD~
Change-Id: I9089123179e09dd565285d50b0caa308d290cccd
Signed-off-by: Rüdiger Herrmann <ruediger.herrmann@gmx.de>
Also-by: Rüdiger Herrmann <ruediger.herrmann@gmx.de>
The native wire protocol sends ref advertisements in the pkt-line
format, which requires encoding the ObjectId and ref name onto a byte
sequence. Busy servers show this is a very high source of garbage,
which pushes the garbage collector harder when there are many refs in
the repository (e.g. 70k, in a Gerrit managed repository).
Optimize the side band advertiser by retaining the CharsetEncoder,
minimizing the amount of temporary garbage built during encoding.
Change-Id: I406c654bf82c1eb94b38862da2425e98396134cb
Git servers supporting HTTP transport can send multiple WWW-Authenticate
challenges [1] for different authentication schemes the server supports.
If authentication fails now retry all authentication types proposed by
the server.
[1] https://tools.ietf.org/html/rfc2617#page-3
Bug: 492057
Change-Id: I01d438a5896f9b1008bd6b751ad9c7cbf780af1a
Signed-off-by: Christian Pontesegger <christian.pontesegger@web.de>
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
setInput should always push at least 1 byte into the Inflater. If 0
bytes (or negative!) are being sent the DfsBlock is inconsistent with
the position passed in. This indicates a severe programming problem
in the caller, and may cause an infinite loop in DfsReader.
Today we saw a handful of live examples of this but don't know what
the cause is. Guard against this error condition and throw with a
more verbose failure, which may prevent an infinite loop. Callers
will eventually catch DataFormatException and rethrow with more detail
about the object that cannot be inflated, with the DFE in the chain.
Change-Id: I64ed2a471520e48283675c6210c6db8a60634635
When using a DfsInserter for high-throughput insertion of many
objects (analogous to git-fast-import), we don't necessarily want to
do a random object lookup for each. It'll be faster from the
inserter's perspective to insert the duplicate objects and let a later
GC handle the deduplication.
Change-Id: Ic97f5f01657b4525f157e6df66023f1f07fc1851
* master:
Fix javadoc errors and unused imports introduced by ddd0fe25
RepoCommand: record manifest shallow recommendation in .gitmodules
RepoCommand: record manifest groups as submodule labels
Remove the deprecated TestRepository.getClock() method
Replace use of deprecated method Repository.getRef()
[findBugs] Prevent potential NPE in
FileLfsRepository.getOutputStream()
Better report on client side if push failed due to too large object
[findBugs] Prevent potential NPE in CloneCommand.init()
RepoCommand: remove --record-remote-branches
RepoCommandTest: Improve assertion message for remote branch recording
Change-Id: I4fbce4f84925a933fcc9a48058ed6793f5821b97
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Git core learned about the submodule.<name>.shallow option in
.gitmodules files, which is a recommendation to clone a submodule
shallow. A repo manifest may record a clone depth recommendation as
an optional field, which contains more information than a binary
shallow/nonshallow recommendation, so any attempted conversion may be
lossy. In practice the clone depth recommendation is either '1' or doesn't
exist, which is the binary behavior we have in Git core.
Change-Id: I51aa9cb6d1d9660dae6ab6d21ad7bae9bc5325e6
Signed-off-by: Stefan Beller <sbeller@google.com>
Git core learned about attributes in pathspecs:
pathspec: allow querying for attributes
The pathspec mechanism is extended via the new
":(attr:eol=input)pattern/to/match" syntax to filter paths so that it
requires paths to not just match the given pattern but also have the
specified attrs attached for them to be chosen.
(177161a5f7, 2016-05-20)
We intend to use these pathspec attribute patterns for submodule
grouping, similar to the grouping in repo. So the RepoCommand which
translates repo manifest files into submodules should propagate this
information along. This requires writing information to the
.gitattributes file instead of the .gitmodules file. For now we just
overwrite any existing .gitattributes file and do not care about prior
attributes set. If this becomes an issue we need to figure out how to
correctly amend the grouping information to an existing .gitattributes
file.
Change-Id: I0f55b45786b6b8fc3d5be62d7f6aab9ac00ed60e
Signed-off-by: Stefan Beller <sbeller@google.com>
JGits PushCommand and BasePackPushConnection were throwing a generic
exception when the pushed pack-file was rejected by the server since it
contained too large objects. Teach JGit to better analyze the server's
response to detect this situation and throw a more specific exception.
Detect this situation by parsing the status line sent by the server.
This change only recognizes the response sent by a JGit based server.
All other servers which report such problems in a different way still
lead to a generic TransportExceptions.
Also see https://git.eclipse.org/r/#/c/46348/
Change-Id: I8d6d65e4585ebb3846f7207e7d1a2f82fa9cbd86
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
File.listFiles() returns null if the File is not a directory, improve
validation of directory and gitDir to fix this.
Change-Id: I763d08835faf96a0beb8e706992df0908526bd2c
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
This function only works in bare mode, and the command line works in
non-bare mode, so there's no point in pretending to support it here.
Change-Id: Ia017aded93d072bdb9947ec08c424256c3abe438
Signed-off-by: Stefan Beller <sbeller@google.com>
* master:
JGit CLI: allow to call git init with specific directory
Redirect all Show output to outs
Support git config [include] section with absolute path(s)
Added filter for merge and non-merges commits.
[findBugs] Prevent potential NPE in FS_POSIX.readUmask()
[findBugs] Fix calculation of host header in SignerV4
Update Orbit repository to S20160518051658 for Neon RC2
Fix StashApply regarding handling of untracked files
GC should not pack objects only referenced by ORIG_HEAD,...
Make sure to overwrite files when "reset --hard" detects conflicts
Allow setting FileMode to executable when applying patches in
ApplyCommand
Fix config value get to return last instead of 1st just like git
Remove UTF-8 checking duplication in Config lib subclasses
Update Maven plugins
Fix type parameter in javadoc in TestRepository.delete(String ref)
TestRepository: Add delete() method
Make BaseReceivePack.setAtomic public
ReceivePack: Pass atomic setting from client to BatchRefUpdate
Change-Id: I5c9c5b7ccb23fb48b44b3da10b2c5d876d043d24
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
* stable-4.3:
Fix computation of id in WorkingTreeIterator with autocrlf and
smudging
Prepare 4.3.2-SNAPSHOT builds
JGit v4.3.1.201605051710-r
Scan loose ref before packed in case gc about to remove the loose
Fix possible NPEs when reporting transport errors
Fix calling of clean/smudge filters from Checkout,MergeCommands
Fix ApplyCommand when result of patch is an empty file
Change-Id: I829f06699f6670e519d04c927bdba4b82df29199
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
JGit failed to do checkouts when the index contained smudged entries and
autocrlf was on. In such cases the WorkingTreeIterator calculated the
SHA1 sometimes on content which was not correctly filtered. The SHA1 was
computed on content which two times went through a lf->crlf conversion.
We used to tell the treewalk whether it is a checkin or checkout
operation and always use the related filters when reading any content.
If on windows and autocrlf is true and we do a checkout operation then
we always used a lf->crlf conversion on any text content. That's not
correct. Even during a checkout we sometimes need the crlf->lf
conversion. E.g. when calculating the content-id for working-tree
content we need to use crlf->lf filtering although the overall operation
type is checkout.
Often this bug does not have effects because we seldom compute the
content-id of filesystem content during a checkout. But we do need to
know whether a file is dirty or not before we overwrite it during a
checkout. And if the index entries are smudged we don't trust the index
and compute filesystem-content-sha1's explicitly.
This caused EGit not to be able to switch branches anymore on Windows
when autocrlf was true. EGit denied the checkout because it thought
workingtree files are dirty because content-sha1 are computed on wrongly
filtered content.
Bug: 493360
Change-Id: I1072a57b4c529ba3aaa50b7b02d2b816bb64a9b8
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
With this change it is possible to initialize repositories with
'git init /path/to/new/repo'
Change-Id: Ia9b288b4fb34887e8f5e2f3f270e521c44d41b6a
Signed-off-by: Rüdiger Herrmann <ruediger.herrmann@gmx.de>
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
The Show command wrote all diffs to System.out instead of 'outs.
Bug: 494143
Change-Id: Ibc78e9a058b7a32d536e03e294c1d933b6c26ba7
Signed-off-by: Rüdiger Herrmann <ruediger.herrmann@gmx.de>
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
As per [1], but limited to absolute paths indeed. No support yet for
tilde or $HOME expansion. Support for the --[no-]includes options
([1]) is not part of this commit scope either, but those options'
defaults are in effect as described in [1].
[1] https://git-scm.com/docs/git-config
Included path can be a config file that includes other path-s in turn.
An exception is thrown if too many recursions (circular includes)
happen because of ill-specified config files.
Change-Id: I700bd7b7e1625eb7de0180f220c707d8e7b0930b
Signed-off-by: Marco Miller <marco.miller@ericsson.com>
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Markus Keller
Shawn Pearce
Mike Williams
Christian Halstrick
Matthias Sohn
Christian Pontesegger
Hugo Arès
Dave Borowitz
Stefan Beller
Terry Parker
Rüdiger Herrmann
Marco Miller