If an application uses PushConnection directly on the native Git wire
protocols JGit should send along the application's expected oldId, not
the advertised value. This allows the remote peer to compare-and-swap
since it was not tested inside JGit.
Discovered when I tried to use a PushConnection (bypassing the
standard PushProcess) and the client blindly overwrote the remote
reference, even though my app had supplied the wrong ObjectId for
the expectedOldObjectId. This was not expected and cost me over an
hour of debugging, plus "corruption" in the remote repository.
By passing along the exact expectedOldObjectId from the app the
remote side can do the check that the application skipped, and
avoid data loss.
Change-Id: Id3920837e6c47100376225bb4dd61fa3e88c64db
FileTreeIterator was calling by mistake
WorkingTreeIterator.idSubmodule(Entry). Instead it should always compute
idSubmodule on its own.
Change-Id: Id1b988aded06939b1d7edd2671e34bf756896c0e
This should mirror the behavior of `git push --atomic` where the
client asks the server to apply all-or-nothing. Some JGit servers
already support this based on a custom DFS backend. InMemoryRepository
is extended to support atomic push for unit testing purposes.
Local disk server side support inside of JGit is a more complex animal
due to the excessive amount of file locking required to protect every
reference as a loose reference.
Change-Id: I15083fbe48447678e034afeffb4639572a32f50c
Instead of checking every entry for .gitattributes only look for the
entry on request by TreeWalk. This avoids impacting uses like RevWalk
filtering history.
When the attrs is requested skip to the start of the tree and look for
.gitattributes until either it is found, or it is impossible to be
present. Due to the sorting rules of tree entries .gitattributes
should be among the first or second entries in the tree so very few
entries will need to be considered.
Waiting to find the .gitattributes file by native ordering may miss
attrs for files like .config, which sorts before .gitattributes.
Starting from the front of the tree on demand ensures the attributes
are parsed as early as necessary to process any entry in the tree.
Due to TreeWalk recursively processing up the tree of iterators we
cannot just reset the current CanonicalTreeParser to the start as
parent parsers share the same path buffer as their children.
Resetting a parent to look for .gitattributes may overwrite path
buffer data used by a child iterator. Work around this by building a
new temporary CanonicalTreeParser instance.
Change-Id: Ife950253b687be325340d27e9915c9a40df2641c
The checkPath function is available as a byte[] form, in fact the
String form just converts to byte[] to run the algorithm.
Having DirCacheEntry take a byte[] -> String -> byte[] to check if
each path is valid is a huge waste of CPU time. On some systems it
can double the time required to read 38,999 files from trees to the
DirCache. This slows down any operation using a DirCache.
Expose the byte[] form and use it for DirCacheEntry creation.
Change-Id: I6db7bc793ece99ff3c356338d793c07c061aeac7
If defined in .gitattributes call smudge filter during checkout.
To support checkout where current HEAD,index do not contain attributes
we need to also consider attributes from the tree we checkout. Therefore
CanonicalTreeParser has to learn how to provide attributes.
Change-Id: I168fdb81a8e1a9f991587b3e95a36550ea845f0a
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
When filters are defined for certain paths in gitattributes make
sure that clean filters are processed when adding new content to the
object database.
Change-Id: Iffd72914cec5b434ba4d0de232e285b7492db868
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Attributes represents a semantic collector of Attribute(s) and replaces
the anonymous Map<String,Attribute>. This class will be returned by
TreeWalk.getAttributes(). It offers convenient access to the attributes
wrapped in the Attributes object. Adds preparations for a future
Attribute Macro Expansion
Change-Id: I8348c8c457a2a7f1f0c48050e10399b0fa1cdbe1
Signed-off-by: Ivan Motsch <ivan.motsch@bsiag.com>
PushCommandTest and RunExternalScriptTest didn't succeed on Windows.
Fix this by expecting a simple line-feed as line ending (instead of the
platform dependent line separator. Additionally correct the computation
of expected URLs in PushCommandTest.
Change-Id: Idcdc41cd7e535ff88df33ea0a249333ed8fc91b0
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
This test expected that the test scripts emit a platform-dependent
newline (crlf on windows, lf on linux). But that's not true. Expected
result should always be a trailing "\n" because the test scripts
explicitly echo a "\n" in the end.
Change-Id: I604e08cda8cebe276b5214ba0f618b6112c3441f
The Repository class provides only one method to look up a ref by
name, getRef. If I request refs/heads/master and that ref does not
exist, getRef will look further in the search path:
ref/refs/heads/master
refs/heads/refs/heads/master
refs/remotes/refs/heads/master
This behavior is counterintuitive, needlessly inexpensive, and usually
not what the caller expects.
Allow callers to specify whether to use the search path by providing
two separate methods:
- exactRef, which looks up a ref when its exact name is known
- findRef, which looks for a ref along the search path
For backward compatibility, keep getRef as a deprecated synonym for
findRef.
This change introduces findRef and exactRef but does not update
callers outside tests to use them yet.
Change-Id: I35375d942baeb3ded15520388f8ebb9c0cc86f8c
Signed-off-by: Jonathan Nieder <jrn@google.com>
The class FS_Win32 was always trying out to create a temporary symlink
in order to find out whether symlinks are supported. FS_Win32_Cygwin was
overwriting this method and always returned true. But when the user
running JGit does not have administrative rights then the creation of
symlinks is forbidden even if he is running on FS_Win32_Cygwin. A lot of
tests failed only on the Windows platform because of this. It was
correctly detected that FS_Win32_Cygwin is the filesystem abstraction to
be used but creation of symlinks always failed because of lacking
privileges of the user running the tests.
This fix teaches FS_Win32_Cygwin to behave like FS_Win32 and to test
whether symlinks can be created in order to find out whether symlinks
are supported.
Change-Id: Ie2394631ffc4c489bd37c3ec142ed44bbfcac726
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Remove references to the bundle org.eclipse.jgit.java7 which was removed
in 4.0.
Change-Id: I85527eb2a34bb94979fdab1311043ae77a2b5ecd
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Prevent that WalkEncryptionTest fails when it can't determine the public
IP address using http://checkip.amazonws.com. Also set timeouts when
determining IP address in order to prevent long wait times during tests.
Change-Id: I1d2fe09f99df2a5f75f8077811a72fb2271cdddb
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
getRef() loops over its search path to find a ref:
Ref ref = null;
for (String prefix : SEARCH_PATH) {
ref = readRef(prefix + needle, packed);
if (ref != null) {
ref = resolve(ref, 0, null, null, packed);
break;
}
}
fireRefsChanged();
return ref;
If readRef returns null (indicating that the ref does not exist), the
loop continues so we can find the ref later in the search path. And
resolve should never return null, so if we return null it should mean
we exhausted the entire search path and didn't find the ref.
... except that resolve can return null: it does so when it has
followed too many symrefs and concluded that there is a symref loop:
if (MAX_SYMBOLIC_REF_DEPTH <= depth)
return null; // claim it doesn't exist
Continue the loop instead of returning null immediately. This makes
the behavior more consistent.
Arguably getRef should throw an exception when a symref loop is
detected. That would be a more invasive change, so if it's a good
idea it will have to wait for another patch.
Change-Id: Icb1c7fafd4f1e34c9b43538e27ab5bbc17ad9eef
Signed-off-by: Jonathan Nieder <jrn@google.com>
Adds the getAttributes feature to the tree walk. The computation of
attributes needs to be done by the TreeWalk since it needs both a
WorkingTreeIterator and a DirCacheIterator.
Bug: 342372
CQ: 9120
Change-Id: I5e33257fd8c9895869a128bad3fd1e720409d361
Signed-off-by: Arthur Daussy <arthur.daussy@obeo.fr>
Signed-off-by: Christian Halstrick <christian.halstrick@sap.com>
When attempting to determine the size of a blob that does not exist,
the RenameDetector throws a MissingObjectException.
The fix is to return a size of zero if the size is requested for a blob
id that doesn't exist.
Bug: 481577
Change-Id: I4e86276039c630617610cc51d0eefa56d7d3952f
Signed-off-by: Rüdiger Herrmann <ruediger.herrmann@gmx.de>
When asked to read a symref pointing to a branch-yet-to-be-born (such
as HEAD in a newly initialized repository), DfsRepository and
FileRepository return different results.
FileRepository:
exactRef("HEAD") => null
DfsRepository:
exactRef("HEAD") => SymbolicRef[HEAD -> refs/heads/master=00000000]
getRef("HEAD") returns the same as DfsRepository's exactRef in both
backends.
The intended behavior is the DfsRepository one: exactRef() is supposed
to be like getRef(), but more exact because it doesn't need to
traverse the search path.
The discrepancy is because DfsRefDatabase implements exactRef()
directly with the intended semantics, while RefDirectory uses a
fallback implementation built on top of getRefs(). getRefs() skips
symrefs to an unborn branch.
Override the fallback implementation with a correct implementation
that is similar to getRef() to avoid this. A followup change will fix
the fallback.
Change-Id: Ic138a5564a099ebf32248d86b93e2de9ab3c94ee
Reported-by: David Pursehouse <david.pursehouse@sonymobile.com>
Improved-by: Christian Halstrick <christian.halstrick@sap.com>
Bug: 478865
Prior to this change, DfsInserter would not insert an object into a pack
if it already existed in another pack in the repository, even if that
pack was unreachable. Consider this sequence of events:
- Object FOO is pushed to a repository.
- Subsequent ref changes make FOO UNREACHABLE_GARBAGE.
- FOO is subsequently re-inserted using a DfsInserter, but skipped
due to existing in UNREACHABLE_GARBAGE.
- The repository is repacked; FOO will not be written into a new pack
because it is not yet reachable from a reference. If the
UNREACHABLE_GARBAGE packs are deleted, FOO disappears.
- A reference is updated to reference FOO. This reference is now broken
as FOO was removed when the repacking process deleted the
UNREACHABLE_GARBAGE pack that stored the only copy of FOO.
The garbage collector can't safely delete the UNREACHABLE_GARBAGE
pack because FOO might be in the middle of being re-inserted/re-packed.
This change writes a duplicate copy of an object if it only exists in
UNREACHABLE_GARBAGE. This "freshens" the object to give it a chance to
survive long enough to be made reachable through a reference.
Change-Id: I20f2062230f3af3bccd6f21d3b7342f1152a5532
Signed-off-by: Mike Williams <miwilliams@google.com>
When the file <git-dir>/hooks/pre-push exists make sure that is is
executing during a push. The pre-push hook runs during git push, after
the remote refs have been updated but before any objects have been
transferred.
Change-Id: Ibbb58ee3227742d1a2f913134ce11e7a135c7f4c
In order to support filters in gitattributes FS.runProcess() is made
public. Support for stdin redirection has been added. Support for binary
data on stdin/stdout (as used be clean/smudge filters) has been added.
Change-Id: Ice2c152e9391368dc5748d7b825a838e3eb755f9
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
When commits are selected for bitmap generation, they are reordered
so that related "chains" of commits are grouped together. Chains are
"subbranches" of commits that may branch off of and re-merge with the
main line. Grouping by chains means that the XOR difference between
consecutive selected commits will be smaller, resulting in better
run-length compression of the XORed bitmaps.
Add a new testSelectionOrderingWithChains() test in a new
GcCommitSelectionTest test class. Also move related GC commit selection
tests out of GcBasicPackingTest and into GcCommitSelectionTest.
Change-Id: I8e80cac29c4ca8193b41c9898e5436c22a659f11
Signed-off-by: Terry Parker <tparker@google.com>
Expose the following bitmap selection parameters via PackConfig:
"bitmapContiguousCommitCount", "bitmapRecentCommitCount",
"bitmapRecentCommitSpan", "bitmapDistantCommitSpan",
"bitmapExcessiveBranchCount", and "bitmapInactiveBranchAge".
The value of bitmapContiguousCommitCount, whereby bitmaps are
created for the most recent N commits in a branch, has never
been verified. If experiments show that they are not valuable,
then we can simplify the implementation so that there is only
a concept of recent and distant commit history (defined by
"bitmapRecentCommitCount"), and the only controls we need are
"bitmapRecentCommitSpan" and "bitmapDistantCommitSpan".
Change-Id: I288bf3f97d6fbfdfcd5dde2699eff433a7307fb9
Signed-off-by: Terry Parker <tparker@google.com>
Replace the “bitmapCommitRange” parameter that was recently introduced
with two new parameters: “bitmapExcessiveBranchCount” and
“bitmapInactiveBranchAgeInDays”. If the count of branches does not
exceed “bitmapExcessiveBranchCount”, then the current algorithm is kept
for all branches.
If the branch count is excessive, then the commit time for the tip
commit for each branch is used to determine if a branch is “inactive”.
"Active" branches get full commit selection using the existing
algorithm. "Inactive" branches get fewer bitmaps near the branch tips.
Introduce a "contiguousCommitCount" parameter that always enforces that
the N most recent commits in a branch are selected for bitmaps. The
previous nextSelectionDistance() algorithm created anywhere from 1-100
contiguous bitmaps at branch tips.
For example, consider a branch with commits numbering 0-300, with 0
being the most recent commit. If the most recent 200 commits are not
merge commits and the 200th commit was the last one selected,
nextSelectionDistance() returned 100, causing commits 200-101 to be
ignored. Then a window of size 100 was evaluated, searching for merge
commits. Since no merge commits are found, the next commit (commit 0)
was selected, for a total of 1 commit in the topmost 100 commits.
If instead the 250th commit was selected, then by the same logic
commit 50 is selected. At that point nextSelectionDistance() switches to
selecting consecutive commits, so commits 0-50 in the topmost 100
commits are selected. The "contiguousCommitCount" parameter provides
more determinism by always selecting a constant number or topmost
commits.
Add an optimization to break out of the inner loop of selectCommits() if
all of the commits for the current branch have already been found.
When reusing bitmaps from an existing pack, remove unnecessary
populating and clearing of the writeBitmaps/PackBitmapIndexBuilder.
Add comments to PackWriterBitmapPreparer, rename methods and variables
for readability.
Add tests for bitmap selection with and without merge commits and with
excessive branch pruning triggered.
Note: I will follow up with an additional change that exposes the new
parameters through PackConfig.
Change-Id: I5ccbb96c8849f331c302d9f7840e05f9650c4608
Signed-off-by: Terry Parker <tparker@google.com>
LocalDiskRepositoryTestCase and TestRepository have competing ideas
about time. Push them into MockSystemReader so they can
cooperate.
Rename getClock() methods that return Dates to getDate().
Change-Id: Ibbd9fe7f85d0064b0a19e3b675b9718a9e67c479
Signed-off-by: Terry Parker <tparker@google.com>
Building on top of https://git.eclipse.org/r/#/c/56391/
Here we preserve compatibility with JetS3t
and add 2 new native JGit encryption implementations.
For reference, see connection configuration files:
* Version 0: jgit-s3-connection-v-0.properties
* Version 1: jgit-s3-connection-v-1.properties
* Version 2: jgit-s3-connection-v-2.properties
Change-Id: I713290bcacbe92d88e5ef28ce137de73dd1abe2f
Signed-off-by: Andrei Pozolotin <andrei.pozolotin@gmail.com>
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
See previous attempt: https://git.eclipse.org/r/#/c/16674/
Here we preserve as much of JetS3t mode as possible
while allowing to use new Java 8+ PBE algorithms
such as PBEWithHmacSHA512AndAES_256
Summary of changes:
* change pom.xml to control long tests
* add WalkEncryptionTest.launch to run long tests
* add AmazonS3.Keys to to normalize use of constants
* change WalkEncryption to support AES in JetS3t mode
* add WalkEncryptionTest to test remote encryption pipeline
* add support for CI configuration for live Amazon S3 testing
* add log4j based logging for tests in both Eclipse and Maven build
To test locally, check out the review branch, then:
* create amazon test configuration file
* located your home dir: ${user.home}
* named jgit-s3-config.properties
* file format follows AmazonS3 connection settings file:
accesskey = your-amazon-access-key
secretkey = your-amazon-secret-key
test.bucket = your-bucket-for-testing
* finally:
* run in Eclipse: WalkEncryptionTest.launch
* or
* run in Shell: mvn test --define test=WalkEncryptionTest
Change-Id: I6f455fd9fb4eac261ca73d0bec6a4e7dae9f2e91
Signed-off-by: Andrei Pozolotin <andrei.pozolotin@gmail.com>
At least on Windows the test failed each second time on the last assert.
Adding a small timeout before gc.prune() makes the test stable again.
Change-Id: I23d98dd565912c58dcf2f24f3ebc24824670cff3
Signed-off-by: Andrey Loskutov <loskutov@gmx.de>
RepoCommandTest was failing because of open file handle left.
IgnoreNodeTest was failing because of problems with creation of files
with trailing spaces on Windows.
HookTest was failing because of wrong line delimiter.
Change-Id: I34f074ac447eb4c3ada8b250309bb568b426189d
Signed-off-by: Andrey Loskutov <loskutov@gmx.de>
If the checkout path is currently a non-empty directory (and was a link
or a regular file before), this directory will be removed before
performing checkout, but only if the checkout path is specified.
Bug: 474973
Change-Id: Ifc6c61592d9b54d26c66367163acdebea369145c
Signed-off-by: Andrey Loskutov <loskutov@gmx.de>
A bitmap index contains bitmaps for a set of commits in a pack file.
Creating a bitmap for every commit is too expensive, so heuristics
select the most "important" commits. The most recent commits are the
most valuable. To clone a repository only those for the branch tips are
needed. When fetching, only commits since the last fetch are needed.
The commit selection heuristics generally work, but for some
repositories the number of selected commits is prohibitively high. One
example is the MSM 3.10 Linux kernel. With over 1 million commits on
2820 branches, the current heuristics resulted in +36k selected commits.
Each uncompressed bitmap for that repository is ~413k, making it
difficult to complete a GC operation in available memory.
The benefit of creating bitmaps over the entire history of a repository
like the MSM 3.10 Linux kernel isn't clear. For that repository, most
history for the last year appears to be in the last 100k commits.
Limiting bitmap commit selection to just those commits reduces the count
of selected commits from ~36k to ~10.5k. Dropping bitmaps for older
commits does not affect object counting times for clones or for fetches
on clients that are reasonably up-to-date.
This patch defines a new "bitmapCommitRange" PackConfig parameter to
limit the commit selection process when building bitmaps. The range
starts with the most recent commit and walks backwards. A range of 10k
considers only the 10000 most recent commits. A range of zero creates
bitmaps only for branch tips. A range of -1 (the default) does not limit
the range--all commits in the pack are used in the commit selection
process.
Change-Id: Ied92c70cfa0778facc670e0f14a0980bed5e3bfb
Signed-off-by: Terry Parker <tparker@google.com>
Previously the method DirCacheCheckoutTest#assertWorkDir() silently
skipped over empty folders. If tests would have left unexpected empty
folders in the worktree this would be overlooked. Now empty folders have
to be specified by something like mkmap("<foldername>", "/", ...]
Change-Id: Idb8b270e92daf02ecdc381d148a5958bd83ec057
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
On a server also running Gerrit that is using RepoCommand to
convert from an XML manifest to a git submodule superproject
periodically, it would be handy to be able to use Gerrit's
submodule subscription feature[1] to update the superproject
automatically between RepoCommand runs as changes are merged
in each subprojects.
This requires setting the 'branch' field for each submodule
so that Gerrit knows what branch to watch. Add an option to
do that.
Setting the branch field also is useful for plain Git users,
since it allows them to use "git submodule update --remote" to
manually update all submodules between RepoCommand runs.
[1] https://gerrit-review.googlesource.com/Documentation/user-submodules.html
Change-Id: I1a10861bcd0df3b3673fc2d481c8129b2bdac5f9
Signed-off-by: Stefan Beller <sbeller@google.com>
This patch makes JGit parsing of ignore rules containing unmatched '['
bracket compatible to the Git CLI.
Since '[' starts character group, Git tries to parse the ignore rule as
a shell glob pattern and if the character group is not closed, the glob
pattern is invalid and so the ignore rule never matches anything.
See also http://article.gmane.org/gmane.comp.version-control.git/278699.
Bug: 478490
Change-Id: I734a4d14fcdd721070e3f75d57e33c2c0700d503
Signed-off-by: Andrey Loskutov <loskutov@gmx.de>
This test case was developed in the scope of bug 478065.
Bug: 478065
Change-Id: Ibcce1ed375d4a6ba05461e6c6b287d16752fa681
Signed-off-by: Sébastien Arod <sebastien.arod@gmail.com>
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
An attempt to re-implement not well documented Git CLI behavior for
patterns with backslashes.
It looks like Git silently ignores all \ characters in ignore rules, if
they are NOT covered by 3 cases described in [1]:
{quote}
1) ... Put a backslash ("\") in front of the first hash for patterns
that begin with a hash.
...
2) Trailing spaces are ignored unless they are quoted with backslash
("\").
...
3) Put a backslash ("\") in front of the first "!" for patterns that
begin with a literal "!", for example, "\!important!.txt".
{quote}
Undocumented also is the fact that backslash itself can be escaped by
backslash.
So \h\e\l\l\o\.t\x\t rule matches hello.txt and a\\\\b a\b in Git CLI.
Additionally, the glob parser [2] knows special meaning of backslash:
{quote}
One can remove the special meaning of '?', '*' and '[' by preceding
them by a backslash, or, in case this is part of a shell command
line, enclosing them in quotes. Between brackets these characters
stand for themselves. Thus, "[[?*\]" matches the four characters
'[', '?', '*' and '\'.
{quote}
[1] https://www.kernel.org/pub/software/scm/git/docs/gitignore.html
[2] http://man7.org/linux/man-pages/man7/glob.7.html
Bug: 478065
Change-Id: I3dc973475d1943c5622103701fa8cb3ea0684e3e
Signed-off-by: Andrey Loskutov <loskutov@gmx.de>
Mike Gilbode
Shawn Pearce
Christian Halstrick
Andrey Loskutov
Kaloyan Raev
Shawn Pearce
Ivan Motsch
Jonathan Nieder
Matthias Sohn
Arthur Daussy
Rüdiger Herrmann
Mike Williams
Terry Parker
Marc Strapetz
Andrei Pozolotin
Stefan Beller
Sébastien Arod