Instead of indexing the subsection names on each request for a given
section name, index both the section and subsection names in a single
scan through the entry list. This should improve lookup time for
reading the section names out of the configuration, especially for the
url.*.insteadof type of processing performed in RemoteConfig.
Change-Id: I7b3269565b1308f69d20dc3f3fe917aea00f8a73
Iterate over all successfully cloned submodules recursively
and continue initializing and updating until no more are found.
Bug: 375426
Change-Id: Ifb99e41e2deb0c369442bca3c0f5f072dd006816
Content length is computed and cached (short term) in the working
tree iterator when core.autocrlf is set.
Hopefully this is a cleaner fix than my previous attempt to make
autocrlf work.
Change-Id: I1b6bbb643101a00db94e5514b5e2b069f338907a
This reverts commit bf845c126d since this
change needs to go through a formal IP review and Chris missed to file a
CQ for that.
Change-Id: I303515d78116f0591a2911dbfb9f857738f086a9
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
This extracts the logic for writing to the reflog from
RefDirectory into a new ReflogWriter class. This class
creates a public API for writing reflog entries similar
to ReflogReader for reading reflog entries.
The new command supports rewriting the stash's log to remove
a configured entry followed by updating the stash ref to
the value at the bottom of the newly written log.
Change-Id: Icfcbc70e838666769a742a94196eb8dc9c7efcc7
Signed-off-by: Chris Aniszczyk <zx@twitter.com>
Check for a '#' character in each line read and
parse the leading characters as the class name of
a TransportProtocol being registered via SPI.
Bug: 373439
Change-Id: If36cb62c07ecea78ba0f326a87edf1d80b7b42b6
Signed-off-by: Chris Aniszczyk <zx@twitter.com>
This allows repositoryies with a missing repositoryformatversion
config value to be successfully opened but still throws exceptions
when the value is a non-long or greater than zero.
git-core attempts to parse this config value as a long as well
and defaults to 0 if the value is missing.
Bug: 368697
Change-Id: I4a93117afca37e591e8e0ab4d2f2eef4273f0cc9
Signed-off-by: Chris Aniszczyk <zx@twitter.com>
Previously only certain values were copied over which caused
divergence in behavior between the JGit command and corresponding
CGit command.
Bug: 372051
Change-Id: I72a83215a679a713138da31f5ab838f14388d4bd
Signed-off-by: Chris Aniszczyk <zx@twitter.com>
This reverts commit 88fe2836ed.
Auto CRLF isn't special enough to be screwing around with the buffers
used for raw byte processing of the ObjectInserter API. If it needs a
buffer to process a file that is bigger than the buffer allocated by
an ObjectInserter, it needs to do its own buffer management.
Change-Id: Ida4aaa80d0f9f78035f3d2a9ebdde904c980f89a
Previously a DirCacheCheckout was done using a merge tree reflecting
the state of the repository when the stash was originally done.
This was wrong since unstashing after making subsequent commits
would undo changes already committed by checking out entries from
an outdated tree.
The new approach is to scan for conflicts initially using a 6-way
tree walk that contains the trees for the stashed HEAD, stashed
index, stashed working directory, current HEAD, current index, and
current working directory. Then perform a subsequent scan of the
stashed HEAD, index, and working directory trees and apply all
the stashed differences to the current index and working directory.
Bug: 372882
Change-Id: Ica65f162132c00a16964e838de66fc8b5cd0b0aa
Signed-off-by: Chris Aniszczyk <zx@twitter.com>
The package was removed in I763590a45d75f00a09097ab6f89581a3bbd3c797
Change-Id: Ifa9e75714f85d17609f9bf61581aaed0631a6fa7
Signed-off-by: Kevin Sawicki <kevin@github.com>
Submodules present in the index but missing from the working
directory should not be staged for deletion when AddCommand
is called with the update flag set to true.
This mirrors the behavior of CGit. Submodules can still be
staged for deletion by running by using the RmCommand.
Change-Id: Iee508a67f9621269d1c28d422f88c6b8dd9f8e6e
If after resolving all conflicts nothing is left to commit, return
an according result, so that downstreams (EGit, ...) can behave like
cgit, and display a nice message informing the user.
Currently, EGit displays a "HEAD advanced fast forward" message, which
is absolutely not helpful at all.
This is the basic API revamping required to get that state communicated
to the outside world (EGit).
Bug: 336812
Change-Id: If2665005cf54a5b51c0fe80bad019fa42b0205af
Checkout command should throw o.e.j.api.errors.CheckoutConflictException
which is a GitAPIException not o.e.j.errors.CheckoutConflictException.
PullCommand should rethrow the API exception as a JGitInternalException.
Bug: 356922
Change-Id: I865c4905997d9834c85a97fbe7287604daf99075
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Removes unneeded calls to Git.wrap in test cases where a valid
Git object already exists as an instance variable.
Change-Id: Id0e032d7886dfa6a3288321503a02743413f707d
Signed-off-by: Chris Aniszczyk <zx@twitter.com>
This will be the message and person used for the commit
of stashed working directory changes.
Bug: 372884
Change-Id: I2501b080f6b94e826cf7dba3fd526ae5c1d969d1
Signed-off-by: Chris Aniszczyk <zx@twitter.com>
The duplication has been introduced when merging
I08e1369e142bb19f42a8d7bbb5a7d062cc8533fc and
I18adc63596f4657516ccc6d704a561924c79d445. The former should have been
manually rebased. It also missed a copyright update in ApplyCommandTest.
Change-Id: I18fe6108220f964524fb16b719604222aa7abee6
CRLF only works for small files, where small is the size of the
buffer, i.e. about 8K. This QD fix reallocates the buffer to be
large enough.
Bug: 369780
Change-Id: Ifc34ad204fbf5986b257a5c616e4a8c601e8261a
This prevents existing entries from being cleared when the
.gitmodules config is saved after the new submodule configuration
is added.
Change-Id: I66841f5e758a7527e2e6e25cf1318e5fea91a909
Signed-off-by: Kevin Sawicki <kevin@github.com>
This is intended to replace the RefFilter interface (but does not yet,
for backwards compatibility). That interface required lots of extra
scanning and copying in filter cases such as only advertising a subtree
of the refs directory. Instead, provide a hook that can be executed
right before ref advertisement, using the public methods on
UploadPack/ReceivePack to explicitly set the map of advertised refs.
Change-Id: I0067019a191c8148af2cfb71a675f2258c5af0ca
Applies the changes in a stashed commit to the local working
directory and index
Bug: 309355
Change-Id: I9fd5ede8affc7f0060ffa7c5cec34573b6fa2b1b
Signed-off-by: Chris Aniszczyk <zx@twitter.com>
Adds a new command to stash the index and working directory
changes in a commit stored in refs/stash
Bug: 309355
Change-Id: I2ce85b1601b74b07e286a3f99feb358dfbdfe29c
Signed-off-by: Chris Aniszczyk <zx@twitter.com>
This will perform the equivalent of running a
'git checkout -- .' at the root of a repository
Change-Id: I3e2dd563700999bc063effdd3640499c8ed08136
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
EolCanonicalizingInputStream may also be used in combination with
.gitattributes. If .gitattributes states that a file is of type text, line
endings have to be canonicalized even if the actual file content seems
to be binary.
Change-Id: Ie4ccdfc5cb91fbd55e06f51146cf5c7c84b8e18b
Handle more cases for file mode changes. Especially make sure that the
following cases are handled correctly.
Case 1)
An entry in the working tree, HEAD tree, and merge tree have
different modes and different content.
Prior Outcome:
Dirty working tree content is replaced and file mode
changes are lost.
New Outcome:
Conflict is generated.
Case 2)
An entry in the index and merge tree have the same content
but different modes but both modes are file type modes.
Prior Outcome:
File mode in working tree is not updated and the working
directory is dirty.
New Outcome:
Index is updated and the working directory is clean.
Bug: 363772
Change-Id: I224602d68228eb419813986807f1eeab77e9c302
Signed-off-by: Christian Halstrick <christian.halstrick@sap.com>
Also-by: Kevin Sawicki <kevin@github.com>
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
A '.git' file in a repository's working tree root is now parsed
as a ref to a folder located elsewhere. This supports submodules
having their repository location outside of the parent repository's
working directory such as in the parent repository's '.git/modules'
directory.
This adds support to BaseRepositoryBuilder for repositories created
with the '--separate-git-dir' option specified to 'git init'.
Change-Id: I73c538f6d845bdbc0c4e2bce5a77f900cf36e1a9
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Moves RepositoryTestCase.writeThashFile, RepositoryTestCase.deleteFile
and dependencies into JGitTestUtil for further reuse.
Required-by-EGit: If8dfa0251797aca56ddc825619500dc21885ba26
Change-Id: I6fc62c8e6626f907e544b5bbe5d64e864a2c323f
Signed-off-by: Dariusz Luksza <dariusz@luksza.org>
Interpret submodule URLs that start with './' or '../' as
relative to either the configured remote for the HEAD branch,
or 'origin', or the parent repository working directory if no
remote URL is configured
Bug: 368536
Change-Id: Id4985824023b75cd45cd64a4dd9d421166391e10
This is used by EGit change I1e1caca561d1b0a0c194bfc42e64b698f42c6e6a to
show branch status in decoration.
It can also be used for providing the same output as C Git in "git
status".
Change-Id: I8d2b108c89905c3f0496f3d517879596740787c0
Signed-off-by: Robin Stocker <robin@nibor.org>
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Getting the name of the remote-tracking branch given a branch is not so
easy to get right. This class provides a way to do that and could be
used for more branch config related things (e.g. in PullCommand).
Change-Id: I896a2384217936c8b672df8b81c9599f5c350458
Signed-off-by: Robin Stocker <robin@nibor.org>
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
It returns the number of commits that are in start and not in end.
Useful for calculating how much a branch is ahead of another one.
Change-Id: I09f7d9b049beea417da7ff32c9f8bf0d4ed46a7f
Signed-off-by: Robin Stocker <robin@nibor.org>
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Revision strings that end with a ':' with no trailing path
should return the tree associated with the current ref parsed
Bug: 368370
Change-Id: I7c7617a77bd418bad4e570be2d1e9002ad280762
Signed-off-by: Robin Rosenberg <robin.rosenberg@dewire.com>
Java's BufferedOutputStream swallows any errors that occur when flushing
the buffer in close().
This class overrides close to make sure an error during the final
flush is reported back to the caller.
Change-Id: I74a82b31505fadf8378069c5f6554f1033c28f9b
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Shawn O. Pearce
Kevin Sawicki
Robin Rosenberg
Matthias Sohn
Tomasz Zarna
Markus Duft
Sascha Scholz
Dave Borowitz
Stefan Lay
Marc Strapetz
Christian Halstrick
Dariusz Luksza
Robin Stocker