CorruptObjectException has a constructor that takes Throwable and
calls initCause with it. Use that instead of instantiating the
exception and explicitly calling initCause.
Change-Id: I1f2747d6c4cc5249e93401b9787eb4ceb50cb995
Signed-off-by: David Pursehouse <david.pursehouse@gmail.com>
In 5e7eed4 a new StoredObjectRepresentationNotAvailableException
constructor was added, that takes a Throwable to initialize the
exception cause.
Update more call sites to use this constructor instead of first
instantiating it and explicitly calling initCause().
All callers now use the new constructor, so annotate the other one as
deprecated.
Change-Id: I6d2a7e289a95f0360ddebf904cfd8b6c18fef10c
Signed-off-by: David Pursehouse <david.pursehouse@gmail.com>
If the cause can be passed into the constructor, callers don't need to
instantiate it and then explicitly call initCause.
Note that the constructors in this class cause "non-API parameter type"
warnings because ObjectToPack is internal, however it's probably OK
since the only non-internal reference to it is in the pgm.debug package.
Change-Id: Ia4eab24e79f9afe6214ea8160137d941d4048319
Signed-off-by: David Pursehouse <david.pursehouse@gmail.com>
Previously, Config was using the same method for both escaping and
parsing subsection names and config values. The goal was presumably code
savings, but unfortunately, these two pieces of the git config format
are simply different.
In git v2.15.1, Documentation/config.txt says the following about
subsection names:
"Subsection names are case sensitive and can contain any characters
except newline (doublequote `"` and backslash can be included by
escaping them as `\"` and `\\`, respectively). Section headers cannot
span multiple lines. Variables may belong directly to a section or to
a given subsection."
And, later in the same documentation section, about values:
"A line that defines a value can be continued to the next line by
ending it with a `\`; the backquote and the end-of-line are stripped.
Leading whitespaces after 'name =', the remainder of the line after
the first comment character '#' or ';', and trailing whitespaces of
the line are discarded unless they are enclosed in double quotes.
Internal whitespaces within the value are retained verbatim.
Inside double quotes, double quote `"` and backslash `\` characters
must be escaped: use `\"` for `"` and `\\` for `\`.
The following escape sequences (beside `\"` and `\\`) are recognized:
`\n` for newline character (NL), `\t` for horizontal tabulation (HT,
TAB) and `\b` for backspace (BS). Other char escape sequences
(including octal escape sequences) are invalid."
The main important differences are that subsection names have a limited
set of supported escape sequences, and do not support newlines at all,
either escaped or unescaped. Arguably, it would be easy to support
escaped newlines, but C git simply does not:
$ git config -f foo.config $'foo.bar\nbaz.quux' value
error: invalid key (newline): foo.bar
baz.quux
I468106ac was an attempt to fix one bug in escapeValue, around leading
whitespace, without having to rewrite the whole escaping/parsing code.
Unfortunately, because escapeValue was used for escaping subsection
names as well, this made it possible to write invalid config files, any
time Config#toText is called with a subsection name with trailing
whitespace, like {foo }.
Rather than pile hacks on top of hacks, fix it for real by largely
rewriting the escaping and parsing code.
In addition to fixing escape sequences, fix (and write tests for) a few
more issues in the old implementation:
* Now that we can properly parse it, always emit newlines as "\n" from
escapeValue, rather than the weird (but still supported) syntax with a
non-quoted trailing literal "\n\" before the newline. In addition to
producing more readable output and matching the behavior of C git,
this makes the escaping code much simpler.
* Disallow '\0' entirely within both subsection names and values, since
due to Unix command line argument conventions it is impossible to pass
such values to "git config".
* Properly preserve intra-value whitespace when parsing, rather than
collapsing it all to a single space.
Change-Id: I304f626b9d0ad1592c4e4e449a11b136c0f8b3e3
The map returned by getAllRefs includes all refs, including symrefs like
HEAD that may not point to any object yet. That is a valid state (e.g.,
in a new repository that has just been created by "git init"), so skip
such refs.
Change-Id: Ieff8a1aa738b8d09a2990d075eb20601156b70d3
Signed-off-by: Zhen Chen <czhen@google.com>
When we are cloning we have no refs at all yet, and there cannot
(or at least should not) be any other thread doing something with
refs yet.
Locking loose refs is thus not needed, since there are no loose
refs yet and nothing should be trying to create them concurrently.
Let's skip the whole loose ref locking when we are cloning a repository.
As a result, JGit will write the refs directly to the packed-refs
file, and will not create the refs/remotes/ directories nor the
lock files underneath when cloning and packed refs are used. Since
no lock files are created, any problems on case-insensitive file
systems with tag or branch names that differ only in case are avoided
during cloning.
Detect if we are cloning based on the following heuristics:
* HEAD is a dangling symref
* There is no loose ref
* There is no packed-refs file
Note, however, that there may still be problems with such tag or
branch names later on. This is primarily a five-minutes-past-twelve
stop-gap measure to resolve the referenced bug, which affects the
Oxygen.2 release.
Bug: 528497
Change-Id: I57860c29c210568165276a123b855e462b6a107a
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
The Config class must be safe to run against untrusted input files.
Reading arbitrary local system paths using include.path is risky for
servers, including Gerrit Code Review.
This was fixed on master [1] by making "readIncludedConfig" a noop
by default. This allows only FileBasedConfig, which originated from
local disk, to read local system paths.
However, the "readIncludedConfig" method was only introduced in [2]
which was needed by [3], both of which are only on the master branch.
On the stable branch only Config supports includes. Therefore this
commit simply disables the include functionality.
[1] https://git.eclipse.org/r/#/c/113371/
[2] https://git.eclipse.org/r/#/c/111847/
[3] https://git.eclipse.org/r/#/c/111848/
Bug: 528781
Change-Id: I9a3be3f1d07c4b6772bff535a2556e699a61381c
Signed-off-by: David Pursehouse <david.pursehouse@gmail.com>
The Config class must be safe to run against untrusted input files.
Reading arbitrary local system paths using include.path is risky for
servers, including Gerrit Code Review. Return null by default to
incide the include should be ignored.
Only FileBasedConfig which originated from local disk should be trying
to read local system paths. FileBasedConfig already overrides this
method with its own implementation.
Change-Id: I2ff31753868aa1bbac4a6843a4c23e50bd6f46f3
This can be useful for sophisticated pre-read algorithms to quickly
determine if a file is likely already in cache, especially small
reftables which may be smaller than a typical DFS block size.
Change-Id: I7756948063b722ff650c9ba82060ff9ad554b0ba
FindBugs reports:
This class is an inner class, but does not use its embedded reference
to the object which created it. This reference makes the instances
of the class larger, and may keep the reference to the creator object
alive longer than necessary. If possible, the class should be made
static.
Change-Id: I9f49de32b4cd81b7ef1239b390353689263bf66e
Signed-off-by: David Pursehouse <david.pursehouse@gmail.com>
If some process executed by FS#readPipe lived for a while after
closing stderr, FS#GobblerThread#run failed with an
IllegalThreadStateException exception when accessing p.exitValue()
for the process which is still alive.
Add Process#waitFor calls to wait for the process completion.
Bug: 528335
Change-Id: I87e0b6f9ad0b995dbce46ddfb877e33eaf3ae5a6
Signed-off-by: Dmitry Pavlenko <pavlenko@tmatesoft.com>
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
File.listFiles() returns null if the given File does not represent a
directory, so we can just test for null instead of making a separate
call to FS.DETECTED.isDirectory()
This also avoids a false-positive error from SpotBugs which claims
that there is a potential null-pointer exception on dereferencing the
result of Files.listFiles().
Change-Id: I18e09e391011db997470f5a09d8e38bb604c0213
Signed-off-by: David Pursehouse <david.pursehouse@gmail.com>
Enclose the call to getStat in a `try`, and release the previously
acquired lock in the `finally`. This prevents that the lock is left
unreleased in the case of an exception being raised in getStat.
Change-Id: I17b4cd134dae887e23a1165253be0ac2d4fd452c
Signed-off-by: David Pursehouse <david.pursehouse@gmail.com>
Boolean is being abused to represent three possible states of atomic
file creation support (true/enabled, false/disabled, null/undefined).
Replace this with an enum of the three explicit states.
Change-Id: I2cd7fa6422311dc427823304b082ce8da50d2fbe
Signed-off-by: David Pursehouse <david.pursehouse@gmail.com>
David Pursehouse
Matthias Sohn
Dave Borowitz
Zhen Chen
Thomas Wolf
Shawn Pearce
David Turner
Dmitry Pavlenko