Change-Id: I6691b454404dd4db3c690ecfc7515de765bc2ef7
Signed-off-by: Martin Goellnitz <m.goellnitz@outlook.com>
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
- enhance FS.readPipe to throw an exception if the external command
fails to enable the caller to handle the command failure
- reduce log level to warning if system git config does not exist
- improve log message
Bug: 476639
Change-Id: I94ae3caec22150dde81f1ea8e1e665df55290d42
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Without the bridge JGit tests don't show log output in Eclipse console.
Change-Id: I7acce1f1787960b5ca98377cb5c7f599a8a220b5
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Since 4.0 JGit does no longer support Java versions older than Java 7 so
there is no need anymore to mention Java 7 in the class name.
Change-Id: Ic46c9d89a7e919ae4a69487fa06de0478d2b21f0
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Refactor all of the push option support code to allocate the list
immediately before parsing the options section off the stream.
Move option support down to ReceivePack instead of BaseReceivePack.
Push options are specific to the ReceivePack protocol and are not
likely to appear in the 4 year old subscription proposal. These
changes are OK before JGit 4.5 ships as no consumer should be relying
on these new APIs.
Change-Id: Ib07d18c877628aba07da07cd91875f918d509c49
Initialize pushOptions when we decide to use them, instead of when we
advertise them.
In the case of HTTP the advertisement is in a different network
request, hence in a different instance of the BaseReceivePack.
Change-Id: I094c60942e04de82cb6d8433c9cd43a46ffae332
Signed-off-by: Stefan Beller <sbeller@google.com>
DfsRefDatabase#compareAndPut had a vague semantics for reference
matching. Because of this, an operation to make a symbolic
reference had been broken for some DFS implementations even if they
followed the contract of compareAndPut. The clarified semantics
requires the implementations to satisfy the followings:
* Matching references should be both symbolic references or both
object ID references.
* If both are symbolic references, both should have the same target
name.
* If both are object ID references, both should have the same object
ID.
This semantics is defined based on
https://git.eclipse.org/r/#/c/77416/. Before this commit,
DfsRefDatabase couldn't see the target of symbolic references.
InMemoryRepository is changed to comply with the new semantics. This
semantics change can affect the existing DFS implementations that only
checks object IDs. This commit adds two tests that the previous
InMemoryRepository couldn't pass.
Change-Id: I6c6b5d3cc8241a81f4a37782381c88e8a59fdf15
Signed-off-by: Masaya Suzuki <masayasuzuki@google.com>
The RepositoryTestCase hierarchy no longer comes from TestCase, so all
test methods must have @Test.
Fix one test that was broken but never run; fortunately this was just
a typo in the test code.
Change-Id: I3ac8ccdab5e2d5539c63d7b0a88d8bdb0c5ff66e
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
This fixes the tests failed in JDK8.
FS uses java.nio API to get file attributes. The timestamps obtained
from that API are more precise than the ones from
java.io.File#lastModified() since Java8.
This difference accidentally makes JGit detect newly added files as
smudged. Use the precised timestamp to avoid this false positive.
Bug: 500058
Change-Id: I9e587583c85cb6efa7562ad6c5f26577869a2e7c
Signed-off-by: Masaya Suzuki <masayasuzuki@google.com>
Signed-off-by: Andrey Loskutov <loskutov@gmx.de>
This will be used by EGit for implementing commit amend in the staging
view (see Idcd1efeeee8b3065bae36e285bfc0af24ab1e88f).
Change-Id: Ice9ebbb1c0c3314c679f4db40cdd3664f61c27c3
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
This fixes the warning "src/ is missing from source.."
Change-Id: I166e3a6a3d5230e4110d3283ec4dbc7d1dfe6732
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
cgit changed the --depth parameter to mean the total depth of history
rather than the depth of ancestors to be returned [1]. JGit still uses
the latter meaning, so update it to match cgit.
depth=0 still means a non-shallow clone. depth=1 now means only the
wants rather than the wants and their direct parents.
This is accomplished by changing the semantic meaning of "depth" in
UploadPack and PackWriter to mean the total depth of history desired,
while keeping "depth" in DepthWalk.{RevWalk,ObjectWalk} to mean
the depth of traversal. Thus UploadPack and PackWriter always
initialize their DepthWalks with "depth-1".
[1] upload-pack: fix off-by-one depth calculation in shallow clone
https://code.googlesource.com/git/+/682c7d2f1a2d1a5443777237450505738af2ff1a
Change-Id: I87ed3c0f56c37e3491e367a41f5e555c4207ff44
Signed-off-by: Terry Parker <tparker@google.com>
When fetching from a shallow clone, the client sends "have" lines
to tell the server about objects it already has and "shallow" lines
to tell where its local history terminates. In some circumstances,
the server fails to honor the shallow lines and fails to return
objects that the client needs.
UploadPack passes the "have" lines to PackWriter so PackWriter can
omit them from the generated pack. UploadPack processes "shallow"
lines by calling RevWalk.assumeShallow() with the set of shallow
commits. RevWalk creates and caches RevCommits for these shallow
commits, clearing out their parents. That way, walks correctly
terminate at the shallow commits instead of assuming the client has
history going back behind them. UploadPack converts its RevWalk to an
ObjectWalk, maintaining the cached RevCommits, and passes it to
PackWriter.
Unfortunately, to support shallow fetches the PackWriter does the
following:
if (shallowPack && !(walk instanceof DepthWalk.ObjectWalk))
walk = new DepthWalk.ObjectWalk(reader, depth);
That is, when the client sends a "deepen" line (fetch --depth=<n>)
and the caller has not passed in a DepthWalk.ObjectWalk, PackWriter
throws away the RevWalk that was passed in and makes a new one. The
cleared parent lists prepared by RevWalk.assumeShallow() are lost.
Fortunately UploadPack intends to pass in a DepthWalk.ObjectWalk.
It tries to create it by calling toObjectWalkWithSameObjects() on
a DepthWalk.RevWalk. But it doesn't work: because DepthWalk.RevWalk
does not override the standard RevWalk#toObjectWalkWithSameObjects
implementation, the result is a plain ObjectWalk instead of an
instance of DepthWalk.ObjectWalk.
The result is that the "shallow" information is thrown away and
objects reachable from the shallow commits can be omitted from the
pack sent when fetching with --depth from a shallow clone.
Multiple factors collude to limit the circumstances under which this
bug can be observed:
1. Commits with depth != 0 don't enter DepthGenerator's pending queue.
That means a "have" cannot have any effect on DepthGenerator unless
it is also a "want".
2. DepthGenerator#next() doesn't call carryFlagsImpl(), so the
uninteresting flag is not propagated to ancestors there even if a
"have" is also a "want".
3. JGit treats a depth of 1 as "1 past the wants".
Because of (2), the only place the UNINTERESTING flag can leak to a
shallow commit's parents is in the carryFlags() call from
markUninteresting(). carryFlags() only traverses commits that have
already been parsed: commits yet to be parsed are supposed to inherit
correct flags from their parent in PendingGenerator#next (which
doesn't happen here --- that is (2)). So the list of commits that have
already been parsed becomes relevant.
When we hit the markUninteresting() call, all "want"s, "have"s, and
commits to be unshallowed have been parsed. carryFlags() only
affects the parsed commits. If the "want" is a direct parent of a
"have", then it carryFlags() marks it as uninteresting. If the "have"
was also a "shallow", then its parent pointer should have been null
and the "want" shouldn't have been marked, so we see the bug. If the
"want" is a more distant ancestor then (2) keeps the uninteresting
state from propagating to the "want" and we don't see the bug. If the
"shallow" is not also a "have" then the shallow commit isn't parsed
so (2) keeps the uninteresting state from propagating to the "want
so we don't see the bug.
Here is a reproduction case (time flowing left to right, arrows
pointing to parents). "C" must be a commit that the client
reports as a "have" during negotiation. That can only happen if the
server reports it as an existing branch or tag in the first round of
negotiation:
A <-- B <-- C <-- D
First do
git clone --depth 1 <repo>
which yields D as a "have" and C as a "shallow" commit. Then try
git fetch --depth 1 <repo> B:refs/heads/B
Negotiation sets up: have D, shallow C, have C, want B.
But due to this bug B is marked as uninteresting and is not sent.
Change-Id: I6e14b57b2f85e52d28cdcf356df647870f475440
Signed-off-by: Terry Parker <tparker@google.com>
The bundle org.eclipse.jgit.java7 was removed in 4.0.
Remove references to it from the README.md.
Remove reference to it from org.eclipse.jgit.test/.project, which
causes an error message when opening the project in Eclipse:
Resource '/org.eclipse.jgit.java7' does not exist.
Change-Id: If0dbd562dcd60550bec3c0f793289474b7624bce
Signed-off-by: David Pursehouse <david.pursehouse@gmail.com>
When doing an incremental fetch from JGit, "have" commits are marked
as "uninteresting". In a non-shallow fetch, when the RevWalk hits an
"uninteresting" commit it marks the commit's corresponding tree as
uninteresting. That has the effect of dropping those trees and all the
trees and blobs they reference out of the thin pack returned to the
client.
However, shallow fetches use a DepthWalk to limit the RevWalk, which
nearly always causes the RevWalk to terminate before encountering the
"have" commits. As a result the pack created for the incremental fetch
never encounters "uninteresting" tree objects and thus includes
duplicate objects that it knows the client already has.
Change-Id: I7b1f7c3b0d83e04d34cd2fa676f1ad4fec904c05
Signed-off-by: Terry Parker <tparker@google.com>
Previously jgit would attempt to clean git repositories that had not
been committed by calling a non-recursive delete on them, which would
fail as they are directories. This commit addresses that issue in the
following ways.
Repositories are skipped in a default clean, similarly to cgit and only
cleaned when the force flag is applied. When the force flag is applied
repositories are deleted using a recursive delete call. The force flag
and setForce method are added here to CleanCommand to support this
change.
Bug: 498367
Change-Id: Ib6cfff65a033d0d0f76395060bf76719e13fc467
Signed-off-by: Matthaus Owens <matthaus@puppetlabs.com>
This commit adds some test coverage to cleaning a repository with a
submodule, which did not previously exist.
Bug: 498367
Change-Id: Ia5c4e4cc53488800dd486f8556dc57656783f1c4
Signed-off-by: Matthaus Owens <matthaus@puppetlabs.com>
This prevents the warning:
Potential heap pollution via varargs parameter
The method doesn't do any casting of types that would cause the heap
pollution, so it should be safe to add @SafeVarArgs.
See [1] for information about this warning.
[1] http://stackoverflow.com/a/12462259/381622
Change-Id: Ic6d252915ea44b4f1c385afecb98906cd2c54382
Signed-off-by: David Pursehouse <david.pursehouse@gmail.com>
Gerrit's superproject subscription feature uses RefSpecs to formalize
the ACLs of when the superproject subscription feature is allowed.
As this is a slightly different use case than describing a local/remote
pair of refs, we need to be more permissive. Specifically we want to allow:
refs/heads/*
refs/heads/*:refs/heads/master
refs/heads/master:refs/heads/*
Introduce a new constructor, that allows constructing these RefSpecs.
Change-Id: I46c0bea9d876e61eb2c8d50f404b905792bc72b3
Signed-off-by: Stefan Beller <sbeller@google.com>
We had a case in Gerrits superproject subscriptions where
'refs/heads/' was configured with the intention to mean 'refs/heads/*'.
The first expression lacks the '*', which is why it is not considered
a wildcard but it was considered valid and so was not found early to be
a typo.
Refs are not allowed to end with '/' anyway, so add a check for that.
Change-Id: I3ffdd9002146382acafb4fbc310a64af4cc1b7a9
Signed-off-by: Stefan Beller <sbeller@google.com>
Example usage:
$ ./jgit push \
--push-option "Reviewer=j.doe@example.org" \
--push-option "<arbitrary string>" \
origin HEAD:refs/for/master
Stefan Beller has also made an equivalent change to CGit:
http://thread.gmane.org/gmane.comp.version-control.git/299872
Change-Id: I6797e50681054dce3bd179e80b731aef5e200d77
Signed-off-by: Dan Wang <dwwang@google.com>
When Repository.close() decrements the useCount to 0 currently the cache
immediately evicts the repository from WindowCache and RepositoryCache.
This leads to I/O overhead on busy repositories because pack files and
references are inserted and deleted from the cache frequently.
This commit defers the eviction of a repository from the caches until
last use of the repository is older than time to live. The eviction is
handled by a background task running periodically.
Add two new configuration parameters:
* core.repositoryCacheExpireAfter: cache entries are evicted if the
cache entry wasn't accessed longer than this time in milliseconds
* core.repositoryCacheCleanupDelay: defines the interval in milliseconds
for running a background task evicting expired cache entries. If set to
-1 the delay is set to min(repositoryCacheExpireAfter, 10 minutes). If
set to 0 the time based eviction is switched off and no background task
is started. If time based eviction is switched off the JVM can still
evict cache entries if heap memory is running low.
Change-Id: I4a0214ad8b4a193985dda6a0ade63b70bdb948d7
Also-by: Matthias Sohn <matthias.sohn@sap.com>
Also-by: Hugo Arès <hugo.ares@ericsson.com>
Also-by: Sasa Zivkov <sasa.zivkov@sap.com>
If the client sent a well-formed enough request to see it wants to use
side-band-64k for status reporting (meaning its a modern client), but
any other command record was somehow invalid (e.g. corrupt SHA-1)
report the parsing exception using channel 3. This allows clients to
see the failure and know the server will not be continuing.
git-core and JGit clients send all commands and then start a sideband
demux before sending the pack. By consuming all commands first we get
the client into a state where it can see and respond to the channel 3
server failure.
This behavior is useful on HTTPS connections when the client is buggy
and sent a corrupt command, but still managed to request side-band-64k
in the first line.
Change-Id: If385b91ceb9f024ccae2d1645caf15bc6b206130
Some branches in WorkingTreeIterator.getIndexFileMode() have not been
covered by tests. Enhance the tests to increase test coverage.
Change-Id: I400a221048f0f6cbaa987350eaf998b0ebb50a4e
DfsGarbageCollector will now enforce a maximum time to live (TTL) for
UNREACHABLE_GARBAGE packs. The default TTL is 1 day, which should be
enough time to avoid races with other processes that are inserting
data into the repository.
Change-Id: Id719e6e2a03cfc9a0c0aef8ed71d261dda14bd0c
Signed-off-by: Mike Williams <miwilliams@google.com>
1f86350 added initial support for include.path. Relative path and path
with tilde are not yet supported but config load was failing if one of
those 2 unsupported options was encountered. Another problem was that
config load was failing if the include.path file did not exist.
Change the behavior to be consistent with native git. Ignore unsupported
or nonexistent include.path.
Bug: 495505
Bug: 496732
Change-Id: I7285d0e7abb6389ba6983e9c46021bea4344af68
Signed-off-by: Hugo Arès <hugo.ares@ericsson.com>
Treewalk has a member 'attr' which caches the attributes for the current
entry. We did not reset the cache always when moving to next entry. The
effect was that when there are no attributes for an entry 'a' but 'a'
was skipped by a Treewalk filter then Treewalk stopped looking for
attributes until TreeWalk.next() was called again.
Change-Id: Ied39b7fb5f56afe7a237da17801003d0abe6b1c7
Problem occurs when the checkout wants to create a file 'd/f' but
the workingtree contains a dirty file 'd'. In order to create d/f the
file 'd' would have to be deleted and since the file is dirty that
content would be lost. This should lead to a CheckoutConflictException
for d/f when failOnConflict was set to true.
This fix also changes jgit checkout semantics to be more like native
gits checkout semantics. If during a checkout jgit wants to delete a
folder but finds that the working tree contains a dirty file at this
path then JGit will now throw an exception instead of silently keeping
the dirty file. Like in this example:
git init
touch b
git add b
git commit -m addB
mkdir a
touch a/c
git add a/c
git commit -m addAC
rm -fr a
touch a
git checkout HEAD~
Change-Id: I9089123179e09dd565285d50b0caa308d290cccd
Signed-off-by: Rüdiger Herrmann <ruediger.herrmann@gmx.de>
Also-by: Rüdiger Herrmann <ruediger.herrmann@gmx.de>
The native wire protocol sends ref advertisements in the pkt-line
format, which requires encoding the ObjectId and ref name onto a byte
sequence. Busy servers show this is a very high source of garbage,
which pushes the garbage collector harder when there are many refs in
the repository (e.g. 70k, in a Gerrit managed repository).
Optimize the side band advertiser by retaining the CharsetEncoder,
minimizing the amount of temporary garbage built during encoding.
Change-Id: I406c654bf82c1eb94b38862da2425e98396134cb
Before this fix, ref directory removal did not work. That was because
the ref lock file was still in the leaf directory at deletion time.
Hence no deep ref directories were ever deleted, which negatively
impacted performance under large directory structure circumstances.
This fix removes the ref lock file before attempting to delete the ref
directory (which includes it). The other deep parent directories are
therefore now successfully deleted in turn, since leaf's content
(lock file) gets removed first.
So, given a structure such as refs/any/directory[/**], this fix now
deletes all empty directories up to -and including- 'directory'. The
'any' directory (e.g.) does not get deleted even if empty, as before.
The ref lock file is still also removed in the calling block's finally
clause, just in case, as before. Such double-unlock brought by this
fix is harmless (a no-op).
A new (private) RefDirectory#delete method is introduced to support
this #pack-specific case; other RefDirectory#delete callers remain
untouched.
Change-Id: I47ba1eeb9bcf0cb93d2ed105d84fea2dac756a5a
Signed-off-by: Marco Miller <marco.miller@ericsson.com>
Git servers supporting HTTP transport can send multiple WWW-Authenticate
challenges [1] for different authentication schemes the server supports.
If authentication fails now retry all authentication types proposed by
the server.
[1] https://tools.ietf.org/html/rfc2617#page-3
Bug: 492057
Change-Id: I01d438a5896f9b1008bd6b751ad9c7cbf780af1a
Signed-off-by: Christian Pontesegger <christian.pontesegger@web.de>
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
When using a DfsInserter for high-throughput insertion of many
objects (analogous to git-fast-import), we don't necessarily want to
do a random object lookup for each. It'll be faster from the
inserter's perspective to insert the duplicate objects and let a later
GC handle the deduplication.
Change-Id: Ic97f5f01657b4525f157e6df66023f1f07fc1851
Git core learned about the submodule.<name>.shallow option in
.gitmodules files, which is a recommendation to clone a submodule
shallow. A repo manifest may record a clone depth recommendation as
an optional field, which contains more information than a binary
shallow/nonshallow recommendation, so any attempted conversion may be
lossy. In practice the clone depth recommendation is either '1' or doesn't
exist, which is the binary behavior we have in Git core.
Change-Id: I51aa9cb6d1d9660dae6ab6d21ad7bae9bc5325e6
Signed-off-by: Stefan Beller <sbeller@google.com>
Andrey Loskutov
Martin Goellnitz
Matthias Sohn
Shawn Pearce
Stefan Beller
Masaya Suzuki
Dave Borowitz
Terry Parker
David Pursehouse
Matthaus Owens
Dan Wang
Christian Halstrick
Hugo Arès
Mike Williams
Marco Miller
Christian Pontesegger