Previously when merging two contents with a non-empty base and one of
the contents was empty (size == 0) and the other was modified there
was a potentially expensive calculation until we finally always come
to the same result -> the complete non-deleted content should collide
with the empty content.
This proposal adds an optimization to detect empty input content and
to produce the appropriate result immediatly.
Change-Id: Ie6a837260c19d808f0e99173f570ff96dd22acd3
Signed-off-by: Christian Halstrick <christian.halstrick@sap.com>
For the following patch on the linux 2.6.32 tag:
--- a/kernel/sched_fair.c
+++ b/kernel/sched_fair.c
@@ -685,6 +685,7 @@ static void enqueue_sleeper(struct cfs_rq *cfs_rq, struct sc
static void check_spread(struct cfs_rq *cfs_rq, struct sched_entity *se)
{
+#if 0
#ifdef CONFIG_SCHED_DEBUG
s64 d = se->vruntime - cfs_rq->min_vruntime;
@@ -694,6 +695,7 @@ static void check_spread(struct cfs_rq *cfs_rq, struct
sched
if (d > 3*sysctl_sched_latency)
schedstat_inc(cfs_rq, nr_spread_over);
#endif
+#endif
}
static void
JGit produced an incorrect diff, attempting to add a new "}" instead
of the new "#endif" at the end of the hunk. This was caused by a prior
fix for bug 328895 where we wanted to "slide" a diff down in the file
when adding a new method/function and want to show the closing curly
brace as being added after the new method, rather than added onto the
end of the prior function or method just before the insertion point.
Bug: 345956
Change-Id: I32b9e24f1e2980258b1b39dd1807919ab1c5f9b2
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
The problem occurred when the first text ends in the middle
of the last line of the other text and the first text has no
end of line.
Bug: 344975
Change-Id: I1f0dd9f8062f2148a7c1341c9122202e082ad19d
Signed-off-by: Robin Rosenberg <robin.rosenberg@dewire.com>
The reflog message fix was done in
I4f1c3cd6b2cf543be213f061afb94223062dde51
Change-Id: I44817ccf4bf226ed3e4ce6fb2d923e88788221dd
Signed-off-by: Robin Rosenberg <robin.rosenberg@dewire.com>
This makes the message look the same as in C Git (the "."):
This reverts commit <sha1>.
Change-Id: I4c254c122277b127e7b039c0d1c7f7a0d691530d
Signed-off-by: Robin Stocker <robin@nibor.org>
Since d1718a the method getHumanishName was broken on windows since
the URIish is not normalized anymore. For a path like
"C:\gitRepositories\egit" the whole path was returned instead of
"egit".
Bug: 343519
Change-Id: I95056009072b99d32f288966302d0f8188b47836
Signed-off-by: Stefan Lay <stefan.lay@sap.com>
Before this change any files in the conflicting set would
also be listed in the the other IndexDiff Sets which is
confusing. With this change a conflicting file will not
be included in any of the other sets.
Change-Id: Ife9f2652685220bcfddc1f9820423acdcd5acfdc
Signed-off-by: Chris Aniszczyk <caniszczyk@gmail.com>
Merging into a non-master branch would result in the following message:
Merge branch 'a' into HEAD
Now the merge message is correct:
Merge branch 'a' into b
Change-Id: I488f97190e4c1711c23a7a3cbd64f8b13a87bbac
Signed-off-by: Robin Stocker <robin@nibor.org>
Duplicates cgit behaviour for merging the case where
OURS is deleted and THEIRS is modified as well as
OURS is modified and THEIRS id deleted.
Change-Id: Ia2ab4f8dc95020f2914ff01c2bf3b1bc62a9d45d
Signed-off-by: Chris Aniszczyk <caniszczyk@gmail.com>
RefDirectory did not correctly follow the contract of RefList. The
contract says if you use add() method of RefList builder, you MUST
sort() it afterwards, and later every other method assumes that list
is properly sorted (especially the binary search in the find() and
get() methods). Instead RefDirectory class tried to scan the refs
recursively while sorting every folder in the process before
processing and did not call sort().
For example, when scanning the contents of refs/tags project1 string
is smaller than project1-*, so it will recursively go into the folder
and add these tags first and only then will add project-* ones. This
will result in a broken list (any project1-* string is less than
project1/* one, but they all appear after them in the list), that's
why binary search will fail making loose RefList and the whole local
RefMap completely unusable.
Change-Id: Ibad90017e3b2435b1396b69a22520db4b1b022bb
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
This ensures that all test data is separated from project sources and
cleaned up after the test. Previously the cloned bare test repository
was created in org.eclipse.jgit.test/ and not deleted after the test
run.
Change-Id: I55110442e365fc8fe610f1c372f72a71ee6e1412
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
The same as with cherry-pick, the commit message of a merge should
include a "Conflicts" section when the merge resulted in conflicts.
Change-Id: I6261dc898262322924af5ca1bef841a654b0df55
Signed-off-by: Robin Stocker <robin@nibor.org>
Add handling of CHERRY_PICK_HEAD file in .git (similar to MERGE_HEAD),
which is written in case of a conflicting cherry-pick merge.
It is used so that Repository.getRepositoryState can return the new
states CHERRY_PICKING and CHERRY_PICKING_RESOLVED. These states, as well
as CHERRY_PICK_HEAD can be used in EGit to properly show the merge tool.
Also, in case of a conflict, MERGE_MSG is written with the original
commit message and a "Conflicts" section appended. This way, the
cherry-picked message is not lost and can later be re-used in the commit
dialog.
Bug: 339092
Change-Id: I947967fdc2f1d55016c95106b104c2afcc9797a1
Signed-off-by: Robin Stocker <robin@nibor.org>
Signed-off-by: Chris Aniszczyk <caniszczyk@gmail.com>
The timeout is also used in the FetchCommand called by the
CloneCommand.
The possibility to provide a list of branches to fetch initially is a
feature offered by EGit. To implement it here is a prerequisite for
EGit to be able to use the CloneCommand.
Change-Id: I21453de22e9ca61919a7c3386fcc526024742f5f
Signed-off-by: Stefan Lay <stefan.lay@sap.com>
When no branch was specified in the clone command, HEAD pointed to a
commit after clone. Now the clone command tries to find a branch which
points to the same commit and checks out this branch.
Bug: 339354
Change-Id: Ie3844465329f213dee4a8868dbf434ac3ce23a08
Signed-off-by: Stefan Lay <stefan.lay@sap.com>
When a new Git instance for an exisiting git repository should be
created there are two use-cases: either the application has already a
Repository instance in hand or the application knows where the
repository resides in the filesystem. Two methods are added to
explicitly support these use-cases: wrap(Repository db) and open(File
gitDir)
Change-Id: I2970e4aa8d4602cb1298f01e5b76bf0f96c492e5
Signed-off-by: Christian Halstrick <christian.halstrick@sap.com>
Instead of tracking the length and modification time by hand, rely
on FileSnapshot to tell RefDirectory when the $GIT_DIR/packed-refs
file has been changed or should be re-read from disk.
Change-Id: I067d268dfdca1d39c72dfa536b34e6a239117cc3
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
We used to normalize URI's since it seems simple. This however causes
inconsistencies to the user and to out tests. Just pass backslashes
through and make sure our parser can handle them.
Bug: 341062
Signed-off-by: Robin Rosenberg <robin.rosenberg@dewire.com>
Change-Id: I2c8e917a086faabcd8749160c2acc9dd05a42838
Detaching HEAD didn't work in some corner checkout cases. If, for example,
HEAD is symbolic ref to refs/heads/master, refs/heads/master is ref to commit
c0ffee... then:
checkout c0ffee...
would leave the HEAD unchanged.
The same symptom occurs when checking out a remote tracking branch or a tag
that references the same commit as refs/heads/master.
In the above case, the RefUpdate class didn't have enough information to decide
if the update needed to detach symbolic ref because it dealt only with new/old
objectIDs. Therefore, this fix introduced the RefUpdate.detachingSymbolicRef
flag.
Bug: 315166
Change-Id: I085c98b77ea8f9104a213978ea0d4ac6fd58f49b
Signed-off-by: Sasa Zivkov <sasa.zivkov@sap.com>
In case an underlying cherry-pick fails due to uncommitted changes, a
RebaseCommand shall fail and roll-back changes.
Change-Id: Ic22eb047fb03ac2c8391f777036b7dbf22a1b061
Signed-off-by: Philipp Thun <philipp.thun@sap.com>
Allow users of the GIT api to get to know the state of their
workingtree and index by adding a status command. The implementation
is mainly a wrapper around IndexDiff class. Better support for multiple
stages in the index (conflict situations) is still missing. An
appropriate change to IndexDiff and StatusCommand will come in a
subsequent commit.
Bug: 337296
Change-Id: Idb390375a68611853c1c903299ec678c89b081dc
Signed-off-by: Christian Halstrick <christian.halstrick@sap.com>
Signed-off-by: Chris Aniszczyk <caniszczyk@gmail.com>
In order to distinguish cherry-pick failures caused by conflicts vs.
'abnormal failures' (e.g. due to unstaged changes or a dirty
worktree), a CherryPickResult class is introduced and returned by
CherryPickCommand.call() instead of a RevCommit. This new class is
similar to MergeResult and RebaseResult. The CherryPickResult contains
all necessary information, e.g. paths causing the cherry-pick (a merge
called within, respectively) to fail. This allows callers to better
react on failures.
Change-Id: I5db57b9259e82ed118e4bf4ec94463efe68b8c1f
Signed-off-by: Philipp Thun <philipp.thun@sap.com>
Signed-off-by: Mathias Kinzler <mathias.kinzler@sap.com>
Add a test case for PullCommand for the successful merge case and test
that the short ref name is used.
Change-Id: I16cbbc88595f73e5512f984e67f93f87ee0fe242
Signed-off-by: Robin Stocker <robin@nibor.org>
java.lang.IndexOutOfBoundsException
at java.nio.ByteBuffer.wrap(ByteBuffer.java:352)
at org.eclipse.jgit.util.RawParseUtils.decodeNoFallback(RawParseUtils.java:913)
at org.eclipse.jgit.util.RawParseUtils.decode(RawParseUtils.java:880)
at org.eclipse.jgit.util.RawParseUtils.decode(RawParseUtils.java:839)
at org.eclipse.jgit.storage.file.ReflogReader$Entry.<init>(ReflogReader.java:102)
at org.eclipse.jgit.storage.file.ReflogReader.getReverseEntries(ReflogReader.java:183)
at org.eclipse.jgit.storage.file.ReflogReader.getReverseEntries(ReflogReader.java:162)
Change-Id: I22a18bc7193962e5018c40a75337f9976b585c40
Add paths causing abnormal merge failures (e.g. due to unstaged
changes) to the MergeResult returned by MergeCommand. This helps
callers to better handle (e.g. present) merge results.
Change-Id: Idb8cf04c5cecfb6a12cb880e16febfc3b9358564
Signed-off-by: Philipp Thun <philipp.thun@sap.com>
This change moves commonly used methods into the RepositoryTestCase
base class.
Change-Id: I56a46c31ee1661c7ce22eb755ab23da8bc9f5da2
Signed-off-by: Philipp Thun <philipp.thun@sap.com>
Simple variant of addAll() that knows how to copy large segments
quickly using System.arraycopy() rather than looping through with
an Iterator object.
Change-Id: Icb50a8f87fe9180ea28b6920f473bb9e70c300f1
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
In case a file needs to be checked out (from THEIRS) during a merge
operation, it has to be checked if the worktree version of this file
is dirty. If this is true, merge shall fail.
Change-Id: I17c24845584700aad953c3d4f2bea77a0d665ec4
Signed-off-by: Philipp Thun <philipp.thun@sap.com>
1. Perform an explicit check for untracked files.
2. Extract 'dirty checks' into separate methods
3. Clean up comments.
4. Tests: also check contents of files not affected by merge.
Change-Id: Ieb089668834d0a395c9ab192c555538917dfdc47
Signed-off-by: Philipp Thun <philipp.thun@sap.com>
We test the -o option of the commit command very accurate by
writing tests for each line of a decision table. In order to
still be able to point new jgit users to the CommitAndLogCommandTest
to find out how to use log() and commit() I factored out these 1200
lines of very specific tests into their own class.
Change-Id: Icf7c517f790a8fa79c8afd9b7f4a2805cf79196e
Signed-off-by: Christian Halstrick <christian.halstrick@sap.com>
If the remote peer replies with "ERR %s" instead of "ACK %s common" or
"NAK" during ancestor negotiation in the fetch-pack/upload-pack
protocol, treat that as an exception that aborts processing with the
error text as supplied by the remote system.
This matches behavior with "ERR %s" during the advertisements, which
is also a way for the remote to abort processing.
Change-Id: I2fe818e75c7f46156744ef4f703c40173cbc76d0
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
An option to insert a change id into the commit message was added
to CommitCommand.
This change is a prerequisite for removing GitIndex from EGit.
Change-Id: Iff9e26a8aaf21d8224bfd6ce3c98821c077bcd82
Signed-off-by: Jens Baumgart <jens.baumgart@sap.com>
Signed-off-by: Philipp Thun <philipp.thun@sap.com>
Signed-off-by: Mathias Kinzler <mathias.kinzler@sap.com>
This enables applications to differentiate between explicitly set
configuration parameters and best effort attempts to guess these
parameters from the operating system.
Change-Id: I67cc4099238a40c6dca795e64f0155ced6008ef1
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
This allows callers to determine if a URI is supported, before
worrying about the local repository.
Suggested-by: Dariusz Luksza <dariusz@luksza.org>
Change-Id: Ifc76a4ba841f2e2e7354bd51306b87b3b9d7f6ab
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Chris Aniszczyk <caniszczyk@gmail.com>
This better matches with PackFile and CachedPack's methods
that return the same value.
Change-Id: Idb9b7c71d2048dd2344a62c2cde20b4e34529ab7
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
PackWriter incorrectly returned 0 from getObjectsNumber() when the
pack has not been written yet. This caused dumb transports like
amazon-s3:// and sftp:// to abort early and never write out a pack,
under the assumption that the pack had no objects.
Until the pack header is written to the output stream, compute the
current object count each time it is requested. Once the header is
started, use the object count from the stats object.
Change-Id: I041a2368ae0cfe6f649ec28658d41a6355933900
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
OwnerMap is about 200 ms faster than SubclassMap, more friendly to the
GC, and uses less storage: testing the "Counting objects" part of
PackWriter on 1886362 objects:
ObjectIdSubclassMap:
load factor 50%
table: 4194304 (wasted 2307942)
ms spent 36998 36009 34795 34703 34941 35070 34284 34511 34638 34256
ms avg 34800 (last 9 runs)
ObjectIdOwnerMap:
load factor 100%
table: 2097152 (wasted 210790)
directory: 1024
ms spent 36842 35112 34922 34703 34580 34782 34165 34662 34314 34140
ms avg 34597 (last 9 runs)
The major difference with OwnerMap is entries must extend from
ObjectIdOwnerMap.Entry, where the OwnerMap has injected its own
private "next" field into each object. This allows the OwnerMap to use
a singly linked list for chaining collisions within a bucket. By
putting collisions in a linked list, we gain the entire table back for
the SHA-1 bits to index their own "private" slot.
Unfortunately this means that each object can appear in at most ONE
OwnerMap, as there is only one "next" field within the object instance
to thread into the map. For types that are very object map heavy like
RevWalk (entity RevObject) and PackWriter (entity ObjectToPack) this
is sufficient, these entity types are only put into one map by their
container. By introducing a new map type, we don't break existing
applications that might be trying to use ObjectIdSubclassMap to track
RevCommits they obtained from a RevWalk.
The OwnerMap uses less memory. Each object uses 1 reference more (so
we're up 1,886,362 references), but the table is 1/2 the size (2^20
rather than 2^21). The table itself wastes only 210,790 slots, rather
than 2,307,942. So OwnerMap is wasting 200k fewer references.
OwnerMap is more friendly to the GC, because it hardly ever generates
garbage. As the map reaches its 100% load factor target, it doubles in
size by allocating additional segment arrays of 2048 entries. (So the
first grow allocates 1 segment, second 2 segments, third 4 segments,
etc.) These segments are hooked into the pre-allocated directory of
1024 spaces. This permits the map to grow to 2 million objects before
the directory itself has to grow. By using segments of 2048 entries,
we are asking the GC to acquire 8,204 bytes in a 32 bit JVM. This is
easier to satisfy then 2,307,942 bytes (for the 512k table that is
just an intermediate step in the SubclassMap). By reusing the
previously allocated segments (they are re-hashed in-place) we don't
release any memory during a table grow.
When the directory grows, it does so by discarding the old one and
using one that is 4x larger (so the directory goes to 4096 entries on
its first grow). A directory of size 4096 can handle up to 8 millon
objects. The second directory grow (16384) goes to 33 million objects.
At that point we're starting to really push the limits of the JVM
heap, but at least its many small arrays. Previously SubclassMap would
need a table of 67108864 entries to handle that object count, which
needs a single contiguous allocation of 256 MiB. That's hard to come
by in a 32 bit JVM. Instead OwnerMap uses 8192 arrays of about 8 KiB
each. This is much easier to fit into a fragmented heap.
Change-Id: Ia4acf5cfbf7e9b71bc7faa0db9060f6a969c0c50
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
The new TransportProtocol type describes what a particular Transport
implementation wants in order to support a connection. 3rd parties
can now plug into the Transport.open() logic by implementing their
own TransportProtocol and Transport classes, and registering with
Transport.register().
GUI applications can help the user configure a connection by looking
at the supported fields of a particular TransportProtocol type, which
makes the GUI more dynamic and may better support new Transports.
Change-Id: Iafd8e3a6285261412aac6cba8e2c333f8b7b76a5
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Bernard Leach
Piotr Janik
Christian Halstrick
Shawn O. Pearce
Robin Rosenberg
Robin Stocker
Matthias Sohn
Stefan Lay
Kevin Sawicki
Leonard Broman
Chris Aniszczyk
Sasa Zivkov
Philipp Thun
Marc Strapetz
Jens Baumgart