If the CLI stops a rebase upon conflict, the current
step is already popped from the git-rebase-todo and appended to the
"done" file. The current implementation wrongly pops the step only
after successful cherry-pick.
Change-Id: I8640dda0cbb2a5271ecf75fcbad69410122eeab6
Signed-off-by: Mathias Kinzler <mathias.kinzler@sap.com>
The Repository is then in state "Rebase interactive".
Change-Id: I5d2de57f8670e1d4c71ed22509ab17f04e2561b5
Signed-off-by: Mathias Kinzler <mathias.kinzler@sap.com>
The IndexDiff had not collected the info if the flag
"assume-unchanged" is set. This information is useful for clients
which may want to decide if specific actions are allowed on a file.
Bug: 326213
Change-Id: I14bb7b03247d6c0b429a9d8d3f6b10f21d8ddeb1
Signed-off-by: Stefan Lay <stefan.lay@sap.com>
When the assume unchanged flag is set the Add command must not update
the index for this file if any changes are present in the working
directory.
Bug: 331351
Change-Id: I255870f689225a1d88971182e0eb377952641b42
Signed-off-by: Stefan Lay <stefan.lay@sap.com>
Rename detection should be considered enabled if
diff.renames config property is set to "copy" or "copies", instead of
throwing IllegalArgumentException.
Change-Id: If55d955e37235d4d00f5b0febd6aa10c0e27814e
In order to enable interoperability with the command line, we need to
remove line feeds when reading the files.
Change-Id: Ie2f5799037a60243bb4fac52346908ff85c0ce5d
Signed-off-by: Mathias Kinzler <mathias.kinzler@sap.com>
The referenced bug showed that JGit produced different merge results
compared to C Git. Unit test was added to reproduce the issue. The
problem can be solved by switching to histogram diff algorithm.
Bug: 331078
Change-Id: I54f30afb3a9fef1dbca365ca5f98f4cc846092e3
Signed-off-by: Christian Halstrick <christian.halstrick@sap.com>
Signed-off-by: Philipp Thun <philipp.thun@sap.com>
The diff algorithm which is used by Merge, Cherry-Pick, Rebase
should be configurable. A new configuration parameter "diff.algorithm"
is introduced which currently accepts the values "myers" or
"histogram". Based on this parameter for example the ResolveMerger
will choose a diff algorithm. The reason for this is bug 331078.
This bug shows that JGit is more compatible with C Git when
histogram diff is in place. But since histogram diff is quite new we
need an easy way to fall back to Myers diff.
Bug: 331078
Change-Id: I2549c992e478d991c61c9508ad826d1a9e539ae3
Signed-off-by: Christian Halstrick <christian.halstrick@sap.com>
Signed-off-by: Philipp Thun <philipp.thun@sap.com>
Check for deletion of temporary files in .git folder.
Check for deletion and creation of files.
Change-Id: I60b0b2975724f2e3582e8674d9f876dcbf62b350
Signed-off-by: Stefan Lay <stefan.lay@sap.com>
Signed-off-by: Mathias Kinzler <mathias.kinzler@sap.com>
Coverage tests showed that we are missing to test certain areas
in the rebase command. Add the missing tests.
Change-Id: Ia4a272d26cde7e1861dac30496e4b6799fc8187a
Signed-off-by: Christian Halstrick <christian.halstrick@sap.com>
The implementation delegates to the CheckoutCommand and
therefore only supports some of the options supported by
the CheckoutCommand.
Signed-off-by: Chris Aniszczyk <caniszczyk@gmail.com>
Add the ability to checkout a branch to the working tree.
Bug: 330860
Change-Id: Ie06b9e799a9e1be384da0b8996efa7209b32eac3
Signed-off-by: Chris Aniszczyk <caniszczyk@gmail.com>
There was a bug introduced by commit 0e815fe. For non-versioned files
the merge algorithm detected an incoming deletion from THEIRS.
Consequently such files were deleted. That's a severe bug which was
fixed by more precisely detecting incoming deletions.
Change-Id: I4385d3c990db11d62e371a385dc8ee89841db84a
Signed-off-by: Christian Halstrick <christian.halstrick@sap.com>
Signed-off-by: Philipp Thun <philipp.thun@sap.com>
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Since we have the RmCommand API now, update Rm to use it.
Change-Id: I6e2cb37573cc8a29846f01e09e8c07e0dc279dbe
Signed-off-by: Chris Aniszczyk <caniszczyk@gmail.com>
This is a first iteration to implement Rebase. At the moment, this
does not implement --continue and --skip, so if the first
conflict is found, the only option is to --abort the command.
Bug: 328217
Change-Id: I24d60c0214e71e5572955f8261e10a42e9e95298
Signed-off-by: Mathias Kinzler <mathias.kinzler@sap.com>
Signed-off-by: Chris Aniszczyk <caniszczyk@gmail.com>
Instead of copying up to 4 fields from the parent iterator each time a
child iterator is initialized and used, construct a single state
object that contains the 4 fields, and pass that one state object
through to the child. This makes it easier to add additional state
fields that must be inherited, at the slight expense of an extra
object allocation per TreeWalk, and an extra level of field
indirection whenever the options, nameEncoder, or read buffer is
required by the iterator.
Change-Id: Ic4603c33b772d7a45f9c81140537d51945688fcb
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Naming these inner classes ensures that stack traces which contain
them will give us useful information about which filter is involved in
the trace, rather than the generated names $1, $2, etc. This makes it
much easier to understand a stack trace at a glance.
Change-Id: Ia6a75fdb382ff6461e02054d94baf011bdeee5aa
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
In the case where DirCacheCheckout was used to checkout a tree
without taking HEAD into account (e.g. during a clone or hard reset)
we didn't handle conflicts correctly. E.g. if there are conflicts
(entries with stage != 0) in the index and we tried to hard reset
we have been processing the conflicting pathes multiple times (once
for every stage). With this fix we will update the index with the
entry from the "merge" state (the state we want checkout) when we
detect existing conflicts.
Change-Id: Iffbddccaa588cf0d1460a5e44dabaf540d996e26
Signed-off-by: Christian Halstrick <christian.halstrick@sap.com>
* rename-detection:
RenameDetector: Only scan deletes if adds exist
SimilarityRenameDetector: Initialize sizes to 0
SimilarityRenameDetector: Avoid allocating source index
SimilarityRenameDetector: Only attempt to index large files once
SimilarityIndex: Don't overflow internal counter fields
SimilarityIndex: Accept files larger than 8 MB
SimilarityIndex: Correct comment explaining the logic
* fs-fsync:
Remove unnecessary flush calls from LockFile
Remove unnecessary region locking from LockFile
Support core.fsyncRefFiles option
Support core.fsyncObjectFiles option
Simplify LockFile write(ObjectId) case
Rewrite the initialization of the encoding tables to be more clear,
but slightly slower to setup. We generally perfer a clear definition
of the data over a slightly slower class load time.
Change-Id: I0c7f89b6ab82dcf71525ffb69a388c312c195913
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Since we have already modified this class to localize an error
message, we might as well strip it down to contain only the
functionality we need, or might ever use.
To keep this simple to review we don't adjust formatting right
away, so code that was buried inside of an if or else block whose
condition was removed might not have the correct indentation anymore.
We can fix this with a later reformatting change.
Change-Id: I2996aaa704e9d6182e5500c7a63240d5e9d722cc
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
When DirCacheCheckout should be used to checkout only one
tree (reset --hard, clone) then we had to use the standard
constructor and specify null as value for head. This change
adds explicit constructors not taking HEAD and documents
that.
Bug: 330021
Signed-off-by: Christian Halstrick <christian.halstrick@sap.com>
Fanout level notes trees are combined back together into a flat leaf
level tree if during a removal of a subtree there are less than 3/4 of
the fanout subtrees still existing, and the size of the combined leaf
is under the 256 split limit noted above.
This rule is used because deletes are less common than insertions, and
SHA-1's relatively uniform distribution suggests that with only 192
subtrees existing in the fanout, there should be approximately 192
names in the combined replacement leaf tree.
Change-Id: Ia9d145ffd5454982509fc40906bc4dbbf2b13952
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Leaf level notes trees are split into a new fan-out tree if an
insertion occurs and the tree already contains >= 256 notes in it.
The splitting may occur multiple times if all of the notes have the
same prefix; in the worst case this produces a tree path such as
"00/00/00/00/00/00/00/00/00/00/00/00/00/00/00/00/00/00/00/be" if all
of the notes begin with zeros.
Change-Id: I2d7d98f35108def9ec49936ddbdc34b13822a3c7
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Some algorithms need to be able to iterate through all notes within a
particular bucket, such as when splitting or combining a bucket.
Exposing an Iterator<Note> makes this traversal possible.
For a LeafBucket the iteration is simple, its over the sorted array of
elements. For FanoutBucket its a bit more complex as the iteration
needs to union the iterators of each fanout bucket, lazily loading any
buckets that aren't already in-memory.
Change-Id: I3d5279b11984f44dcf0ddb14a82a4b4e51d4632d
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
This is necessary to allow applications to wrap the note tree in
a commit and update the note branch with the new state.
Change-Id: Idbd7ead4a1b16ae2b64a30a4a01a29cfed548cdf
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
NoteMap now supports editing in-memory, allowing applications to
modify the NoteMap once it has been loaded from the branch. The
ability to write the branch back to tree objects is not yet done,
so the edits are strictly transient.
Change-Id: I63448954abfca2a8e3e95369cd84c0d1176cdb79
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
The lock file protocol relies on the atomic creation of a standardized
name in the parent directory of the file being updated. Since the
creation is atomic, at most one thread in any process can succeed on
this creation, and all others will fail. While the lock file exists,
that file is private to the thread that is writing it, and no others
will attempt to read or modify the file.
Consequently the use of the region level locks around the file are
unnecessary, and may actually reduce performance when using NFS, SMB,
or some other sort of remote filesystem that supports locking.
Change-Id: Ice312b6fb4fdf9d36c734c3624c6d0537903913b
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
If core.fsyncRefFiles is set to true, fsync is used whenever a
reference file is updated, ensuring the file contents are also
written to disk. This can help to prevent empty ref files after
a system crash when using a filesystem such as HFS+ where data
writes may be delayed.
Change-Id: Ie508a974da50f63b0409c38afe68772322dc19f1
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Some repositories may be on really unstable filesystems, but still
want to have good reliability when objects are written to disk. If
core.fsyncObjectFiles is set to true, request the JVM to ensure the
data is written before returning success to the caller of insert.
The option defaults to false because it should be useless on any
filesystem that orders writes and metadata, such as ext3 mounted with
data=ordered (or data=journal). But it may be useful on some systems
(especially HFS+) where file content may flush to the disk
independently of filesystem structure changes.
Because FileChannel.force(boolean) only claims to ensure data is
written if it was written using the write(ByteBuffer) method of
FileChannel, redirect all writes when using fsyncObjectFiles to go
through the FileChannel interface instead of through the older style
OutputStream interface. This may not be necessary on all JVMs, but
its more portable to follow the definition than the common behavior.
Change-Id: I57f6b6bb7e403c07fbae989dbf3758eaf5edbc78
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Mathias Kinzler
Stefan Lay
Shawn Pearce
Marc Strapetz
Chris Aniszczyk
Christian Halstrick
Matthias Sohn