We add either 3 or 4 filters. If we are adding only 3 filters,
allocating the array for 4 isn't a huge waste of memory, but it
does simplify our code.
Change-Id: I7df29b414f6d5cfcf533edb1405083e6fcec32cf
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
To improve runtime performance, caching the WorkingTreeOptions inside
of the Config object using the Config.SectionParser API allows
the WorkingTreeOptions to be accessed more efficiently whenever a
FileTreeIterator is constructed for the Repository.
Instead of passing the filemode handling option into isModified(),
the WorkingTreeIterator should always honor whatever setting has
been configured in this repository, as defined by its own copy of
the WorkingTreeOptions. This simplifies all of the callers as they
no longer need to lookup core.filemode on their own.
A few locations were changed from always using a hardcoded "true"
on the file mode to passing what is actually configured in the
repository. This is a behavior change, but corrects what should be
considered to be bugs as the core.filemode variable wasn't always
being used.
Change-Id: Idb176736fa0dc97af372f1d652a94ecc72fb457c
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
When indexing large blobs that are stored whole (non-delta form),
avoid allocating the entire blob in memory and instead stream it
through the SHA-1 checksum computation. This reduces the size
of memory required by IndexPack when processing very big blobs,
such as a 500 MiB uncompressable binary.
If the large blob already exists in the local repository, its
contents needs to be compared byte-for-byte after the entire pack
has been indexed, to ensure there isn't an unexpected SHA-1 collision
which may result in later data corruption. This compare is performed
as a streaming compare, again avoiding the large object allocation.
This change doesn't improve on memory utilization for large objects
stored as deltas. The change also doesn't improve handling for
any large commits, trees or annotated tags. There isn't much to
be done here for those objects, because they need to be passed down
to the ObjectChecker as a byte[]. Fortunately it isn't common for
these object types to be that large,
Bug: 312868
Change-Id: I862afd4cb78013ee033d4ec68c067b1774a05be8
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Chris Aniszczyk <caniszczyk@gmail.com>
CC: Roberto Tyley <roberto.tyley@guardian.co.uk>
Some method parameters in WorkingTreeIterator are never used. Remove
them. Especially the removal of the FS parameter in isModified()
simplifies upcoming performance optimizations.
Change-Id: I7c449589283a4a6b6e23f2586cd784febdca8bcd
Signed-off-by: Christian Halstrick <christian.halstrick@sap.com>
Signed-off-by: Chris Aniszczyk <caniszczyk@gmail.com>
Introduce a http test bundle to make this functionality available for
EGit tests. A simple http server class is provided. The jetty version
was updated to a version that is also available via p2 (needed in EGit
UI tests).
Change-Id: I13bfc4c6c47e27d8f97d3e9752347d6d23e553d4
Signed-off-by: Jens Baumgart <jens.baumgart@sap.com>
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Its confusing that a new TreeWalk() needs to have reset() invoked
on it before addTree(). This is a historical accident caused by
how TreeWalk was abused within ObjectWalk.
Drop the initial empty tree from the TreeWalk and thus remove a
number of pointless reset() operations from unit tests and some of
the internal JGit code.
Existing application code which is still calling reset() will simply
be incurring a few unnecessary field assignments, but they should
consider cleaning up their code in the future.
Change-Id: I434e94ffa43491019e7dff52ca420a4d2245f48b
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
By inflating with an InputStream like API, it is possible to stream
through large objects rather than allocating the entire thing as
a byte[]. This change only refactors the inflation code within
IndexPack to use a streaming interface.
Change-Id: I5a84b486901c2cf63fa6a3306dd5fb5c53b4056b
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
CC: Roberto Tyley <roberto.tyley@guardian.co.uk>
java.io.File.delete() reports failure as an exceptional
return value false. Fix the code which silently ignored
this exceptional return value. Also remove some duplicate
deletion helper methods.
Change-Id: I80ed20ca1f07a2bc6e779957a4ad0c713789c5be
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Provide file helper methods in a reusable utility class to
replace many local implementations. java.io.File has some
methods reporting failure by returning false. We prefer to
throw IOException on failure so that callers can't forget
checking the return value.
Change-Id: I430c77b5d2cffcf8b47584326ad4817a7291845e
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Static accessors should come before a constructor.
Change-Id: Iee1051ce4f2038f19a08741e7a3a33f06a97a3c0
Signed-off-by: Chris Aniszczyk <caniszczyk@gmail.com>
We should grab the repository directory from the command to
avoid an NPE if no git directory is passed in via the CLI.
Change-Id: I649467c6d84bbc0d26a070d0d4ff1e6f81fd5bad
Signed-off-by: Chris Aniszczyk <caniszczyk@gmail.com>
There are some files that need to exist so that the CLI can continue
after the rebase has been stopped due to conflicts
Change-Id: I3cb4dc98609c059bf0cf9fd5f9e47a9c681cea2d
Signed-off-by: Mathias Kinzler <mathias.kinzler@sap.com>
Currently the following can happen in LockFile.commit: deletion of the
original file succeeds but renaming fails afterwards. In this case the
original file (e.g. branch file in refs/heads) is lost.
To workaround the issue the same retry logic as for file deletion is
applied to file renaming.
Bug: 331890
Change-Id: I68620c07f2d3ab7f3279c71a91e184e8eac69832
Signed-off-by: Jens Baumgart <jens.baumgart@sap.com>
Signed-off-by: Philipp Thun <philipp.thun@sap.com>
Because tags are more interesting here than local or remote branch
heads, tags get sorted earlier in the array than heads or remotes do.
Bug: 324939
Change-Id: Ifc3863461654df7f34fdecbd2abe1f4b5d2ffb8e
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
CC: Mathias Kinzler <mathias.kinzler@sap.com>
CC: Stefan Lay <stefan.lay@sap.com>
DirCacheCheckout needs to use ObjectLoader.copyTo to avoid loading the
complete content of a large file into the JVM heap.
Bug: 321097
Change-Id: I967590b6f233fd1c83d873075db01d653208b3b9
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
CC: Chris Aniszczyk <caniszczyk@gmail.com>
CC: Christian Halstrick <christian.halstrick@sap.com>
If the environment variable GIT_SSH is set, use GIT_SSH for any remote
protocol connections, instead of the local JSch library.
Bug: 321062
Change-Id: Ia18ea49d58f3ed657430067f1f72ef788a2dae4c
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
In order to honor GIT_SSH the TransportGitSsh class needs to run the
process named by the GIT_SSH environment variable and use that as the
pipes for connectivity to the remote peer. Refactor the current
transport code to support a different type of pipe connectivity, so we
can later add GIT_SSH.
Bug: 321062
Change-Id: I9d8ee1a95f1bac5013b33a4a42dcf1f98f92172f
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Displaying the current tree in the ls-tree style output makes it
easier to see what entries are currently stored.
Change-Id: If17c414db0d2e8d84e65de8bbcba7fd1b79aa311
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Reviewed-by: Chris Aniszczyk <caniszczyk@gmail.com>
This makes usage of a TreeFormatter more similar to a CommitBuilder or
a TagBuilder: populate the formatter and pass to the ObjectInserter.
Change-Id: I5a45ef3a35cc73f4905a34bc6f6228510df8eb2c
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Reviewed-by: Chris Aniszczyk <caniszczyk@gmail.com>
This better matches the existing API of TreeFormatter, but is just a
simple delegation to build().
Change-Id: I188f43acc34455e773d63836724b05e18f5c7a84
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Reviewed-by: Chris Aniszczyk <caniszczyk@gmail.com>
These objects don't need to be updated with the resulting ObjectId of
the formatted content, callers can get that from the ObjectInserter on
their own.
Change-Id: Idc5f097de9f7beafc5e54e597383d82daf9d7db4
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Reviewed-by: Chris Aniszczyk <caniszczyk@gmail.com>
The correct names for these is build(), as that is what a Java
developer will expect given the "builder" pattern.
Bug: 323541
Change-Id: I35042bdc95a955beeaee29e54bde10e4240b2a71
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Reviewed-by: Chris Aniszczyk <caniszczyk@gmail.com>
When in OURS and THEIRS a new file is created we want a conflict
when the two contents differ. If on two branches the same file
with the same content is created this should not be a conflict.
But: the current merge algorithm is throwing NPEs in this case.
Fix this by choosing an empty RawText as common base if the
base is empty.
Change-Id: I21cb23f852965b82fb82ccd66ec961c7edb3ac3d
Signed-off-by: Christian Halstrick <christian.halstrick@sap.com>
If the object type is a whole object and all we want is the type,
there is no need to skip the length header. The type is already known
and can be returned as-is. Instead skip the length header only for
the two delta formats, where the delta base must itself be scanned.
Change-Id: I87029258e88924b3e5850bdd6c9006a366191d10
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
This variable was not used for anything, but Eclipse's JDT failed to
notice because of the "shift += " operation within the body of the
while loop. Here we don't need the shift because we do not decode the
length, but we do have to skip over the bytes that store the length to
locate the delta base.
Bug: 331319
Change-Id: I200a874fd7e39e3adf2640b8cd0f53dcf91ef4c9
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
CC: Remy Suen <remysuen@ca.ibm.com>
Shawn O. Pearce
Chris Aniszczyk
Christian Halstrick
Jens Baumgart
Matthias Sohn
Mathias Kinzler
Robin Rosenberg