The main concern are submodule urls starting with '-' that could pass as
options to an unguarded tool.
Pass through the parser the ids of blobs identified as .gitmodules
files in the ObjectChecker. Load the blobs and parse/validate them
in SubmoduleValidator.
Change-Id: Ia0cc32ce020d288f995bf7bc68041fda36be1963
Signed-off-by: Ivan Frade <ifrade@google.com>
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
In order to validate .gitmodules files, we first need to find them
in the incoming pack.
Do it in the ObjectChecker stage. Check in the tree objects if they
point to a .gitmodules file and report the tree id and the .gitmodules
blob id.
This can be used later to check if the file is in the root of the
project and if the contents are good.
While we're here, make isMacHFSGit more accurate by detecting variants
of filenames that vary in case.
[jn: tweaked NTFS and HFS+ checking; added more tests]
Change-Id: I70802e7d2c1374116149de4f89836b9498f39582
Signed-off-by: Ivan Frade <ifrade@google.com>
Signed-off-by: Jonathan Nieder <jrn@google.com>
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
In C git versions before 2.19.1, the submodule is fetched by running
"git clone <uri> <path>". A URI starting with "-" would be interpreted
as an option, causing security problems. See CVE-2018-17456.
Refuse to add submodules with URIs, names or paths starting with "-",
that could be confused with command line arguments.
[jn: backported to JGit 4.7.y, bringing portions of Masaya Suzuki's
dotdot check code in v5.1.0.201808281540-m3~57 (Add API to specify
the submodule name, 2018-07-12) along for the ride]
Change-Id: I2607c3acc480b75ab2b13386fe2cac435839f017
Signed-off-by: Ivan Frade <ifrade@google.com>
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
This test was never being run. Since it was introduced it was
named "notest.." which meant it didn't run with JUnit3, and
since it is not annotated @Test it also doesn't run with JUnit4.
When compiling with Bazel 0.6.0, error-prone raises an error
that the public method is not annotated with @Ignore or @Test.
Given that the test has never been run anyway, we can just
remove it.
Bug: 525415
Change-Id: Ie9a54f89fe42e0c201f547ff54ff1d419ce37864
Signed-off-by: David Pursehouse <david.pursehouse@gmail.com>
If packed refs are used, duplicate updates result in an exception
because JGit tries to lock the same lock file twice. With non-atomic
ref updates, this used to work, since the same ref would simply be
locked and updated twice in succession.
Let's be more lenient in this case and remove duplicates before
trying to do the ref updates. Silently skip duplicate updates
for the same ref, if they both would update the ref to the same
object ID. (If they don't, behavior is undefined anyway, and we
still throw an exception.)
Add a test that results in a duplicate ref update for a tag.
Bug: 529400
Change-Id: Ide97f20b219646ac24c22e28de0c194a29cb62a5
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
Bug: 529314
Change-Id: I91eaeda8a988d4786908fba6de00478cfc47a2a2
Signed-off-by: Marc Strapetz <marc.strapetz@syntevo.com>
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
Change-Id: I2442394fb7eae5b3715779555477dd27b274ee83
Signed-off-by: Marc Strapetz <marc.strapetz@syntevo.com>
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
Remove completely the empty directories under refs/<namespace>
including the first level partition of the changes, when they are
completely empty.
Bug: 536777
Change-Id: I88304d34cc42435919c2d1480258684d993dfdca
Signed-off-by: Luca Milanesio <luca.milanesio@gmail.com>
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
After packaging references, the folders containing these references are
not deleted. In a busy repository, this causes operations to slow down
as traversing the references tree becomes longer.
Delete empty reference folders after the loose references have been
packed.
To avoid deleting a folder that was just created by another concurrent
operation, only delete folders that were not modified in the last 30
seconds.
Signed-off-by: Hector Oswaldo Caballero <hector.caballero@ericsson.com>
Change-Id: Ie79447d6121271cf5e25171be377ea396c7028e0
Signed-off-by: Luca Milanesio <luca.milanesio@gmail.com>
Signed-off-by: David Pursehouse <david.pursehouse@gmail.com>
If we give Jsch access to the ssh config file, we must _not_ resolve
the host name from the alias. Instead we must give the alias (i.e.,
the host name as is in the URI) to Jsch, so that it finds the same
ssh config entry.
Otherwise if the hostname in the URI, which is taken as an alias in
ssh config ("Host" line), is unequal to the "Hostname" line, and
there happens to be another ssh config entry with that translated
host name as alias, Jsch will pick up that second entry, and we end
up with a strange mixture of both.
Add tests for this case.
Bug: 531118
Change-Id: I249d8c073b0190ed110a69dca5b9be2a749822c3
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
Jsch unconditionally overwrites the port from the ssh config
file (if a port is specified there), even if the URI explicitly does
give a different port.
Fix this, and add tests.
Change-Id: I7b014543c7ece26270e366db39d7647f82d64f0d
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
Jsch caches keys (aka identities) specified in ~/.ssh/config via
IndentityFile only for the current Jsch Session. This results in
multiple password prompts for successive sessions.
Do the handling of IdentityFile exclusively in JGit, as it was before
4.9. JGit uses different Jsch instances per host and caches the
IdentityFile there, allowing it to be re-used in different sessions
for the same host.
* Add comments to explain this.
* Move the JschBugFixingConfig from OpenSshConfig to
JschConfigSessionFactory to have all these Jsch work-arounds
in one place.
* Make that config hide the IdentityFile config from Jsch to avoid
that Jsch overrides the JGit behavior.
Bug: 529173
Change-Id: Ib36c34a2921ba736adeb64de71323c2b91151613
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
Change-Id: Iaaefc2cbafbf083d6ab158b1c378ec69cc76d282
Signed-off-by: David Turner <dturner@twosigma.com>
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Originally the patterns were escaped twice leading
to wrong matching results.
Bug: 528886
Change-Id: I26e201b4b0ef51cac08f940b76f381260fa925ca
Signed-off-by: Dmitry Pavlenko <pavlenko@tmatesoft.com>
Signed-off-by: David Pursehouse <david.pursehouse@gmail.com>
These are ignored by C git when parsing:
$ git config -f - --list <<EOF
[foo "x\0y"]
bar = baz
[foo "x\qy"]
bar = baz
[foo "x\by"]
bar = baz
[foo "x\ny"]
bar = baz
[foo "x\ty"]
bar = baz
EOF
foo.x0y.bar=baz
foo.xqy.bar=baz
foo.xby.bar=baz
foo.xny.bar=baz
foo.xty.bar=baz
This behavior is different from value parsing, where an invalid escape
sequence is an error (which JGit already does as well):
$ git config -f - --list <<EOF
[foo]
bar = x\qy
EOF
fatal: bad config line 2 in standard input
Change-Id: Ifd40129b37d9a62df3d886d8d7e22f766f54e9d1
When interleaving reads and writes from an unflushed pack, we forgot to
reset the file pointer back to the end of the file before writing more
new objects. This had at least two unfortunate effects:
* The pack data was potentially corrupt, since we could overwrite
previous portions of the file willy-nilly.
* The CountingOutputStream would report more bytes read than the size
of the file, which stored the wrong PackedObjectInfo, which would
cause EOFs during reading.
We already had a test in PackInserterTest which was supposed to catch
bugs like this, by interleaving reads and writes. Unfortunately, it
didn't catch the bug, since as an implementation detail we always read a
full buffer's worth of data from the file when inflating during
readback. If the size of the file was less than the offset of the object
we were reading back plus one buffer (8192 bytes), we would completely
accidentally end up back in the right place in the file.
So, add another test for this case where we read back a small object
positioned before a large object. Before the fix, this test exhibited
exactly the "Unexpected EOF" error reported at crbug.com/gerrit/7668.
Change-Id: I74f08f3d5d9046781d59e5bd7c84916ff8225c3b
Previously, Config was using the same method for both escaping and
parsing subsection names and config values. The goal was presumably code
savings, but unfortunately, these two pieces of the git config format
are simply different.
In git v2.15.1, Documentation/config.txt says the following about
subsection names:
"Subsection names are case sensitive and can contain any characters
except newline (doublequote `"` and backslash can be included by
escaping them as `\"` and `\\`, respectively). Section headers cannot
span multiple lines. Variables may belong directly to a section or to
a given subsection."
And, later in the same documentation section, about values:
"A line that defines a value can be continued to the next line by
ending it with a `\`; the backquote and the end-of-line are stripped.
Leading whitespaces after 'name =', the remainder of the line after
the first comment character '#' or ';', and trailing whitespaces of
the line are discarded unless they are enclosed in double quotes.
Internal whitespaces within the value are retained verbatim.
Inside double quotes, double quote `"` and backslash `\` characters
must be escaped: use `\"` for `"` and `\\` for `\`.
The following escape sequences (beside `\"` and `\\`) are recognized:
`\n` for newline character (NL), `\t` for horizontal tabulation (HT,
TAB) and `\b` for backspace (BS). Other char escape sequences
(including octal escape sequences) are invalid."
The main important differences are that subsection names have a limited
set of supported escape sequences, and do not support newlines at all,
either escaped or unescaped. Arguably, it would be easy to support
escaped newlines, but C git simply does not:
$ git config -f foo.config $'foo.bar\nbaz.quux' value
error: invalid key (newline): foo.bar
baz.quux
I468106ac was an attempt to fix one bug in escapeValue, around leading
whitespace, without having to rewrite the whole escaping/parsing code.
Unfortunately, because escapeValue was used for escaping subsection
names as well, this made it possible to write invalid config files, any
time Config#toText is called with a subsection name with trailing
whitespace, like {foo }.
Rather than pile hacks on top of hacks, fix it for real by largely
rewriting the escaping and parsing code.
In addition to fixing escape sequences, fix (and write tests for) a few
more issues in the old implementation:
* Now that we can properly parse it, always emit newlines as "\n" from
escapeValue, rather than the weird (but still supported) syntax with a
non-quoted trailing literal "\n\" before the newline. In addition to
producing more readable output and matching the behavior of C git,
this makes the escaping code much simpler.
* Disallow '\0' entirely within both subsection names and values, since
due to Unix command line argument conventions it is impossible to pass
such values to "git config".
* Properly preserve intra-value whitespace when parsing, rather than
collapsing it all to a single space.
Change-Id: I304f626b9d0ad1592c4e4e449a11b136c0f8b3e3
It was already increased in 61a943e and 661232b but is still not
enough to take into account snapshot versions that are 100 or more
commits ahead of tag, i.e. 4.9.2.201712150930-r.105-gc1d37ca27
Change-Id: Ibeff73adae06b92fe5bb9c5eced9e4c6a08c437c
Signed-off-by: David Pursehouse <david.pursehouse@gmail.com>
The Config class must be safe to run against untrusted input files.
Reading arbitrary local system paths using include.path is risky for
servers, including Gerrit Code Review.
This was fixed on master [1] by making "readIncludedConfig" a noop
by default. This allows only FileBasedConfig, which originated from
local disk, to read local system paths.
However, the "readIncludedConfig" method was only introduced in [2]
which was needed by [3], both of which are only on the master branch.
On the stable branch only Config supports includes. Therefore this
commit simply disables the include functionality.
[1] https://git.eclipse.org/r/#/c/113371/
[2] https://git.eclipse.org/r/#/c/111847/
[3] https://git.eclipse.org/r/#/c/111848/
Bug: 528781
Change-Id: I9a3be3f1d07c4b6772bff535a2556e699a61381c
Signed-off-by: David Pursehouse <david.pursehouse@gmail.com>
The Config class must be safe to run against untrusted input files.
Reading arbitrary local system paths using include.path is risky for
servers, including Gerrit Code Review. Return null by default to
incide the include should be ignored.
Only FileBasedConfig which originated from local disk should be trying
to read local system paths. FileBasedConfig already overrides this
method with its own implementation.
Change-Id: I2ff31753868aa1bbac4a6843a4c23e50bd6f46f3
Matthias Sohn
Ivan Frade
David Pursehouse
Thomas Wolf
Marc Strapetz
Luca Milanesio
Hector Caballero
Dave Borowitz
David Turner
Karsten Thoms
Dmitry Pavlenko
Shawn Pearce