Instead of hiding this logic inside of DirCacheTree and the legacy
Tree type, pull it into a common place where we can reuse it by
creating tree records in a buffer that can be passed directly into
the ObjectInserter. This allows us to avoid some copying, as the
inserter can be given the internal buffer of the formatter.
Because we trust these two callers to feed us records in the proper
order, without '/' in the names, and without duplicate names in the
same tree, we don't do any validation inside of the formatter itself.
To protect themselves from making ordering errors, developers should
continue to use DirCache to process edits to source code trees.
Change-Id: Idf7f10e736d4a44ccdf8afe060535d7b0554a92f
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
JGit merge algorithm behaved differently from C Git when
we had adjacent modifications. If line 9 was modified by
OURS and line 10 by theirs then C Git will return a
conflict while JGit was seeing this as independent
modifications. This change is not only there to achieve
compatibility, but there where also some really wrong
merge results produced by JGit in the area of adjacent
modifications.
Change-Id: I8d77cb59e82638214e45b3cf9ce3a1f1e9b35c70
Signed-off-by: Christian Halstrick <christian.halstrick@sap.com>
When adding a new method near the end of the sequence we want to
show the full method inserted, and not tear the prior method due
to the common trailing curly brace being consumed as part of the
common end region of the sequences.
Bug: 328895
Change-Id: I233bc40445fb5452863f5fb082bc3097433a8da6
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
HistogramDiff failed on cases where the initial element for the LCS
was actually very common (e.g. has 20 occurrences), and the first
element of the inserted region after the LCS was also common but
had fewer occurrences (e.g. 10), while the LCS also contained a
unique element (1 occurrence).
This happens often in Java source code. The initial element for
the LCS might be the empty line ("\n"), and the inserted but common
element might be "\t/**\n", with the LCS being a large span of
lines that contains unique method declarations. Even though "/**"
occurs less often than the empty line its not a better LCS if the
LCS we already have contains a unique element.
The logic in HistogramDiff would normally have worked fine, except I
tried to optimize scanning of B by making tryLongestCommonSequence
return the end of the region when there are matching elements
found in A. This allows us to skip over the current LCS region,
as it has already been examined, but caused us to fail to identify
an element that had a lower occurrence count within the region.
The solution used here is to trade space-for-time by keeping a
table of A positions to their occurrence counts. This allows the
matching logic to always use the smallest count for this region,
even if the smallest count doesn't appear on the initial element.
The new unit test testEdit_LcsContainsUnique() verifies this new
behavior works as expected.
Bug: 328895
Change-Id: Id170783b891f645b6a8cf6f133c6682b8de40aaf
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Fixes the "Method ignores results of InputStream.read()" warning.
This is the only place where read() was used instead of readFully()
and the return value was not checked. So it was either an oversight
or should be documented. This change assumes it was an oversight.
Change-Id: I859404a7d80449c538a552427787f3e57d7c92b4
The value was accessed every time in the loop body with get(),
so use the more efficient entrySet().
Change-Id: I91d90cbd0b0d03ca4a3db986c58b8d80d80f40a4
This was already disabled in the Eclipse preferences for the project.
With this, Hudson should also ignore it.
Change-Id: I7a6b9a20451dc5ba9a61553248b5f4b6c6c7a78b
As described in Bug 328551 there was a bug that the merge algorithm
was not always reporting conflicts when the same line was deleted
and modified. This problem was introduced during commit
0c017188b4 when reported conflicts have
been checked for common pre- and suffixes.
This was fixed here by better determining whether after stripping
off common prefixes and suffixes from a conflicting region there
is still some conflicting part left.
I also added a unit test to test this situation.
Bug: 328551
Change-Id: Iec6c9055d00e5049938484a27ab98dda2577afc4
Signed-off-by: Christian Halstrick <christian.halstrick@sap.com>
When creating a local branch based on another local branch, the
upstream configuration contains "." as origin and the source branch
as "merge". The PullCommand should support this by skipping the
fetch step altogether and use the base branch to merge with.
Change-Id: I260a1771aeeffca5b0161d1494fd63c672ecc2a6
Signed-off-by: Mathias Kinzler <mathias.kinzler@sap.com>
AmbiguousObjectException contains an AbbreviatedObjectId and is
supposed to be serializable, so it should be serializable as well.
Change-Id: I8056e78aee20fdd3cb9600b52cd8ed988544293d
It's probably not possible that these numbers are negative in the
algorithm, but it's cleaner this way and gets rid of three more
FindBugs warnings.
Change-Id: Ifbce4e2c787fb9a7cd309c605e8d86211ef8a352
Don't permit transient worker threads to access the underlying output
stream of a ProgressMonitor, as they might get marked as the stream's
writer thread. Instead proxy update events from the workers back onto
the application's real work thread. This ensures that the stream only
sees a single thread, and its the thread that will remain alive for
the entire life cycle of the operation.
This fixes IOException("Write end dead") during local repository fetch
when threaded delta search is enabled. One of the transient delta
search threads became the designated writer for the pipe, and when it
terminated the reader end thought the writer was dead, even though the
main writer thread was still executing in PackWriter.
Bug: 326557
Change-Id: I01d1b20a3d7be1c0b480c7fb5c9773c161fe5c15
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
RefsDirectory fires a RefsChangedEvent when it detect that one
ref changed (new, modified, deleted). But there was a potential
of wrong events beeing fired leading to a endless loop in EGit.
Problem is that when calling getRefs(ALL) we don't want to report
additional refs and by that we remove the additional refs from
the list of "refs reported upwards last time". We fire an
RefsChangedEvent because we think that the special refs are not
there anymore.
I fixed this by removing eventing for the additional refs. Another
alternative would be to always scan also for additional refs and
put them in the list of refs. But getRefs(ALL) would then remove
the additional refs again. I didn't do that for performance reasons
and also because I am not sure whether we want evnting for
additional refs.
Change-Id: Icb9398b55a8c6bbf03e38f6670feb67754ce91e0
Signed-off-by: Christian Halstrick <christian.halstrick@sap.com>
When checking out a tree, files that are identical to the file in
the current index and working directory don't need to be updated.
Change-Id: I9e025a53facd42410796eae821baaeff684a25c5
Signed-off-by: Chris Aniszczyk <caniszczyk@gmail.com>
IndexDiff now allows to set an additional filter. This can be used
e.g. for restricting the tree walk to a given set of files.
Change-Id: I642de17e74b997fa0c5878c90631f6640ed70bdd
Signed-off-by: Jens Baumgart <jens.baumgart@sap.com>
The RefDirectory class was not returning FETCH_HEAD and
MERGE_HEAD when trying to get all refs via getRefs(RefDatabase.ALL).
This fix adds constants for FETCH_HEAD and ORIG_HEAD and adds a
new getter getAdditionalRefs() to get these additional refs.
To be compatible with c git the getRefs(ALL) method will not return
FETCH_HEAD, MERGE_HEAD and ORIG_HEAD.
Change-Id: Ie114ca92e9d5e7d61d892f4413ade65acdc08c32
Signed-off-by: Christian Halstrick <christian.halstrick@sap.com>
We need to use findbugs-maven-plugin:2.3.2-SNAPSHOT
since otherwise build fails with maven-3.0 [1], [2].
We should switch to the release version as soon
as this becomes available.
[1] http://www.sonatype.com/people/2010/10/maven-3-0-has-landed/
[2] http://jira.codehaus.org/browse/MFINDBUGS-122
Bug: 327799
Change-Id: I1c57f81cf6f0450e56411881488c4ee754e458e3
Signed-off-by: Chris Aniszczyk <caniszczyk@gmail.com>
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
If an object hasn't been accessed yet the pack list for a repository
may not have been scanned from disk. If an application (e.g. the dumb
transport servlet support code) asks for the pack list for an
ObjectDirectory, we should load it immediately.
Change-Id: I93d7b1bca422d905948e8e83b2afa83c8894a68b
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
If an ObjectInserter is created from a CachedObjectDirectory, we need
to ensure the cache is updated whenever a new loose object is actually
added to the loose objects directory, otherwise a future read from an
ObjectReader on the CachedObjectDirectory might not be able to open
the newly created object.
We mostly had the infrastructure in place to implement this due to the
injection of unpacked large deltas, but we didn't have a way to pass
the ObjectId from ObjectDirectoryInserter to CachedObjectDirectory,
because the inserter was using the underlying ObjectDirectory and not
the CachedObjectDirectory. Redirecting to CachedObjectDirectory
ensures the cache is updated.
Change-Id: I1f7bdfacc7ad77ebdb885f655e549cc570652225
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
These messages may need to change depending on the current
thread's configured locale, and thus cannot be static.
Change-Id: I96751a63852ec9c4bf6c47edadcf8752700543df
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
There was a chance that we hit a NPE which doing a checkout
with DirCacheCheckout when there is no HEAD (e.g. initial
checkout). This is fixed here.
Change-Id: Ie3b8cae21dcd90ba8352823ea94a700f8ee9221a
Signed-off-by: Christian Halstrick <christian.halstrick@sap.com>
Implemented the initial version of a cherry-pick command.
A correct error handling is missing (what happens if the
checkout fails, the cherry-pick leads to conflicts etc).
But straightforward cherry-picks works.
Change-Id: I235c0eb3a7a2d5bdfe40400f1deed06f29d746e1
Signed-off-by: Christian Halstrick <christian.halstrick@sap.com>
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
These routines can be useful when debugging, because we can add an
expression to the Eclipse "Expressions" panel to show the text that
appears on a line. Gerrit Code Review also uses these in its own
subclass of RawText in order to format patch files, so pulling it up
to be part of core JGit may help other applications too.
Change-Id: I20a6b112e3403ecfc1c2715ae75dcecc1a85b167
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Since the introduction of HashedSequence we no longer need to supply
the RawTextComparator at the time of constructing a RawText. Drop the
definition from the constructor, because it doesn't make sense as part
of our public API.
Change-Id: Iaab34611d60eee4a2036830142b089b2dae81842
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
When an empty line was inserted at the beginning of the common end
part of a RawText the comparator incorrectly considered it to be
common, which meant the DiffAlgorithm would later not even have it be
part of the region it examines. This would cause JGit to skip a line
of insertion, which later confused Gerrit Code Review when it tried to
match up the pre and post RawText files for a difference that had this
type of insertion.
Define two new unit tests to check for this insertion of a blank line
condition and correct for it by removing the LF from the common region
when the condition is detected.
Change-Id: I2108570eb2929803b9a56f9fb9c400c758e7156b
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
The maven 2 build for jgit source bundle didn't create a correct
OSGi version string, instead of
org.eclipse.jgit.source_0.10.0.<timestamp>
the generated OSGi version was
org.eclipse.jgit.source_0.10.0.SNAPSHOT
This caused trouble when trying to install it from p2 repository.
Bug: 327616
Change-Id: Ic27c763ae9a4bcbb5bd6ed9562cd98bb4da3386b
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
It wrongly uses the full name of the branch to remove the
configuration entries but must use the shortened one.
Change-Id: Ie386a128a6c6beccc20bafd15c2e36254c5f560d
Signed-off-by: Mathias Kinzler <mathias.kinzler@sap.com>
When creating a branch with CreateBranchCommand.call() without
specifying an explicit startPoint HEAD should be used as startPoint.
There was a bug leading to an NPE in such a case.
Change-Id: Ic0a5dc1f33a0987d66c09996c8012c45785500ff
Signed-off-by: Christian Halstrick <christian.halstrick@sap.com>
There was a wrong javadoc comment telling that MergeCommand
only supports fast-forward merges. This has been fixed.
Change-Id: I7edea779a83528beee34a1753026288c384881ce
Signed-off-by: Christian Halstrick <christian.halstrick@sap.com>
We wanted to wrap all LowLevel JGit excpetions into a
JGitInternalException so that users of this high-level interface
don't have to explicitly catch all of them. This
was forgotten on BranchCreateCommand.call() and I added
it.
Change-Id: Ie140e99574fb004137c66e80fb92eb6c6d0fa5e1
Signed-off-by: Christian Halstrick <christian.halstrick@sap.com>
HistogramDiff outperforms it for any case where PatienceDiff needs to
fallback to another algorithm. Consequently it's not worth keeping
around, because we would always want a fallback enabled.
Change-Id: I39b99cb1db4b3be74a764dd3d68cd4c9ecd91481
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Its behavior is similar to PatienceDiff, and runs nearly as fast,
often beating the performance of MyersDiff.
Change-Id: I43c3faefa8109f1a68ef57522bec9cf27b5df252
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Large objects stored as deltas get unpacked by JGit into a loose
object, so they are cheaper to access later on. This unpacking was
broken because TeeInputStream copied the wrong length into the loose
object, sometimes copying too many bytes into the result. This
created a loose object that did not have the correct content, and
whose length did not match the length denoted in the object header.
Change-Id: I3ce1fd9f3dc5bd195249c7872b3bec49570424a2
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
When passing to a fallback algorithm, we can avoid creating a new copy
of the hash codes for each sequence by passing in the hashed sequences
directly. This makes it cheaper to switch from HistogramDiff down to
MyersDiff in a single pass.
Change-Id: Ibf2e81be57c083862eeb134279aed676653bf9b5
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
There is a corner case where we get an EMPTY region during recursion,
but we didn't expect to receive that. Its harmless to ignore the
region since the region is empty and has no content, so do so rather
than throwing an exception
Change-Id: I50dcec81ecba763072bb739adfab5879fb48b23a
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Certain inputs caused an infinite loop because the prior match data
couldn't be used as expected. Rather than incrementing the match
pointer before looking at an element, do it after, so the loop breaks
when we wrap around to the starting point.
Change-Id: Ieab28bb3485a914eeddc68aa38c256f255dd778c
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
The need for branching becomes more pressing with pull
support: we need to make sure the upstream configuration entries
are written correctly when creating and renaming branches
(and of course are cleaned up when deleting them).
This adds support for listing, adding, deleting and renaming
branches including the more common options.
Bug: 326938
Change-Id: I00bcc19476e835d6fd78fd188acde64946c1505c
Signed-off-by: Mathias Kinzler <mathias.kinzler@sap.com>
Signed-off-by: Chris Aniszczyk <caniszczyk@gmail.com>
In bug 323571 it is mentioned that if you call
'toURI().toURL().toString()' on a java.io.File you cannot pass
that string to jgit as an URIish. Problem is that the passed
URI looks like 'file:/C:/a/b.txt' and that we where expecting
double slashes after scheme':'. This fix adds support for this
single-slash file URLs.
Bug: 323571
Change-Id: I866a76a4fcd0c3b58e0d26a104fc4564e7ba5999
Signed-off-by: Christian Halstrick <christian.halstrick@sap.com>
This is the minimal implementation of a "Pull" command. It does not
have any parameters besides the generic progress monitor and timeout.
It works on the currently checked-out branch and assumes that the
configuration contains the keys "branch.<branch name>.remote" and
"branch.<branch name>.merge" to determine the remote configuration
for the fetch and the remote branch name for the merge.
Bug: 303404
Change-Id: I7fe09029996d0cfc09a7d8f097b5d6af1488fa93
Signed-off-by: Mathias Kinzler <mathias.kinzler@sap.com>
Signed-off-by: Chris Aniszczyk <caniszczyk@gmail.com>
Shawn O. Pearce
Christian Halstrick
Robin Stocker
Mathias Kinzler
Lluis Sanchez
Jens Baumgart
Matthias Sohn
Chris Aniszczyk