* stable-4.5:
Only mark packfile invalid if exception signals permanent problem
Don't flag a packfile invalid if opening existing file failed
Prepare 4.5.2-SNAPSHOT builds
Change-Id: I20b50981adc54c426666015ff04fe3bb1db9abd9
Signed-off-by: David Pursehouse <david.pursehouse@gmail.com>
Add NoPackSignatureException and UnsupportedPackVersionException to
explicitly mark permanent unrecoverable problems with a pack
Assume problem with a pack is permanent only if we are sure the
exception signals a non-transient problem we can't recover from:
- AccessDeniedException: we lack permissions
- CorruptObjectException: we detected corruption
- EOFException: file ended unexpectedly
- NoPackSignatureException: pack has no pack signature
- NoSuchFileException: file has gone missing
- PackMismatchException: pack no longer matches its index
- UnpackException: unpacking failed
- UnsupportedPackIndexVersionException: unsupported pack index version
- UnsupportedPackVersionException: unsupported pack version
Do not attempt to handle Errors since they are thrown for serious
problems applications should not try to recover from.
Change-Id: I2c416ce2b0e23255c4fb03a3f9a0ee237f7a484a
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
This is required since we now use AbstractLoginService which was
introduced in Jetty 9.4.0.
Change-Id: Iee6e4ae456123099f7a99cc53c5ae02fd43bfa46
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
A packfile random file open operation may fail with a
FileNotFoundException even if the file exists, possibly
for the temporary lack of resources.
Instead of managing the FileNotFoundException as any generic
IOException it is best to rethrow the exception but prevent
the packfile for being flagged as invalid until it is actually
opened and read successfully or unsuccessfully.
Bug: 514170
Change-Id: Ie37edba2df77052bceafc0b314fd1d487544bf35
Signed-off-by: Luca Milanesio <luca.milanesio@gmail.com>
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Add a new API method to set the recurse mode, and pass the mode into
the fetch command.
Extend the existing FetchCommandRecurseSubmodulesTest to also perform
the same tests for fetch. Rename the test class accordingly.
Change-Id: I12553af47774b4778f7011e1018bd575a7909bd0
Signed-off-by: David Pursehouse <david.pursehouse@gmail.com>
In I3ab958ce8 explicit dependency in lib/BUILD were defined and most
of the bazel build implementation was switched to using it. Switch
test.bzl test implementation to using explicit dependencies as well.
Change-Id: I4413d1a45addeeb2a980d07669fa034c2eebb3a4
Signed-off-by: David Ostrovsky <david@ostrovsky.org>
Add bazel build for ui and junit.http, and the test packages.
A number of different test labels are supported:
api
attributes
dfs
diff
http
lfs
lfs-server
nls
notes
pack
patch
pgm
reftree
revplot
revwalk
storage
submodule
symlinks
transport
treewalk
util
To run all tests:
bazel test //...
To run specific tests, using labels:
bazel test --test_tag_filters=api,dfs,revplot,treewalk //...
Change-Id: Ic41b05a79d855212e67b1b4707e9c6b4dc9ea70d
Signed-off-by: David Ostrovsky <david@ostrovsky.org>
Signed-off-by: Jonathan Nieder <jrn@google.com>
This is a preparation change to Bazel build implementation. Error
Prone rejects the code with variable crypto algorithm as insecure
see: [1].
[1] http://errorprone.info/bugpattern/InsecureCryptoUsage
Change-Id: I92db70a7da454bc364597a995e8be5dccc2d6427
Signed-off-by: David Ostrovsky <david@ostrovsky.org>
Only testonly targets (such as tests) need to use junit.
In particular this involves making the toplevel :all rule testonly.
It's not clear to me what that rule is for --- "bazel build //..."
already works to build all targets. In any case it appears to be for
testing, so marking it as testonly shouldn't be harmful.
Change-Id: I28ff508ab8ce2ec0a0111109110aa9680d30600e
This provides a place to declare visibility restrictions and
transitive dependencies for each library.
Other targets should only declare dependencies on what they directly
use, making dependencies easier to maintain.
Trim the dependencies of org.eclipse.jgit:jgit to follow that rule.
It declares dependencies on Apache httpcomponents and the servlet
API but doesn't use them.
Tested:
* 'bazel build //...' succeeds
* applying the change https://gerrit-review.googlesource.com/90843
to a copy of Gerrit, following the instructions there, and running
'bazel test //...' in that copy of Gerrit still succeeds
Change-Id: I3ab958ce8b3227019cdbe4cc81e0f042e1541034
With the filename suffix "Tests", the module was not included in tests
when building with Maven, and without the @Test annotations the tests
didn't get executed under Eclipse or buck test.
testRacyGitDetection was failing because the index file did not exist.
Add the missing configuration, the missing annotations, and add a call
to reset() in testRacyGitDetection to force creation of the index file.
Change-Id: I29dd8f89c36fef4ab40bedce7f4a26bd9b2390e4
Signed-off-by: David Pursehouse <david.pursehouse@gmail.com>
This fixes test flagged by error prone:
LongObjectIdTest.java:294: error: [SelfComparison] An object is
compared to itself
assertEquals(0, id1.compareTo(id1));
Change-Id: Ife339c92b9570db2471a2fc029b3bfa114044790
Signed-off-by: David Ostrovsky <david@ostrovsky.org>
This fixes error flagged by error prone:
Java compilation in rule '//org.eclipse.jgit.test:jgit' failed: Worker
process sent response with exit code: 1.
org.eclipse.jgit.test/tst/org/eclipse/jgit/revwalk/RevFlagSetTest.java:149:
error: [CollectionIncompatibleType] Argument '"bob"' should not be
passed to this method; its type String is not compatible with its
collection's type argument RevFlag
assertFalse(set.contains("bob"));
Change-Id: I4a971ce92fee55e28b2ab0c7b716ac20fa9c6709
Signed-off-by: David Ostrovsky <david@ostrovsky.org>
This fixes Bazel build:
in srcs attribute of java_library rule //org.eclipse.jgit:jgit:
file '//org.eclipse.jgit:src/org/eclipse/jgit/util/sha1/SHA1.recompress'
is misplaced here (expected .java, .srcjar or .properties).
Another option that was considered is to exclude the non source files.
Change-Id: I7083f27a4a49bf6681c85c7cf7b08a83c9a70c77
Signed-off-by: David Ostrovsky <david@ostrovsky.org>
* stable-4.6:
Don't remove pack when FileNotFoundException is transient
Change-Id: I82941a98385cda27c89e1e6750b7b6db4e39f414
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
* stable-4.5:
Don't remove pack when FileNotFoundException is transient
Change-Id: Ic17c542d78a4cad48ff1ed77dcdc853a4ef2dc06
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
The FileNotFoundException is typically raised in three conditions:
1. file doesn't exist
2. incompatible read vs. read/write open modes
3. filesystem locking
4. temporary lack of resources (e.g. too many open files)
1. is already managed, 2. would never happen as packs are not
overwritten while with 3. and 4. it is worth logging the exception and
retrying to read the pack again.
Log transient errors using an exponential backoff strategy to avoid
flooding the logs with the same error if consecutive retries to access
the pack fail repeatedly.
Bug: 513435
Change-Id: I03c6f6891de3c343d3d517092eaa75dba282c0cd
Signed-off-by: Luca Milanesio <luca.milanesio@gmail.com>
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
The submodule.name.fetchRecurseSubmodules value was being read from the
configuration of the submodule, but it should be read from the config
of the parent repository.
Also, the fetch.recurseSubmodules value from the parent repository's
configuration was not being considered at all.
Fix both of these and add tests. Now the precedence of the recurse mode
is determined as follows:
1. Value passed to the API
2. Value configured in submodule.name.fetchRecurseSubmodules
3. Value configured in fetch.recurseSubmodules
4. Default to "on demand"
Change-Id: Ic23b7c40b5f39135fb3fd754c597dd4bcc94240c
Breaking API for API implementors (not clients) in a minor release is ok
following OSGi semantic versioning rules.
Change-Id: I14bb4a3084b237b4cd893a130e148148cd1e5df9
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
We detect API changes during the Maven build using japicmp. Update the
reference version to the latest minor version 4.6.0.
Change-Id: I70f65f4a0680671612f21ee1afac7f7ef0152cbb
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
We updated the version we use for packaging the p2 repository in
efbecb97 but missed to update the version we compile against in the
Maven build.
Bug: 513354
Change-Id: I49afd89b43cfd8735568a86ef273723909d694a3
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
This allows implementations to reject operations that do not
include proper authentication.
Change-Id: If301476d8fb56a0899e424be3789c7576097d185
Signed-off-by: David Pursehouse <david.pursehouse@gmail.com>
* stable-4.6:
Update Jetty to 9.4.1.v20170120 in buck build
Update Jetty to 9.4.1.v20170120
Update build to use Tycho 1.0.0
Update minimum JDK version in README
Change-Id: I735697c112094e883986ce13026d967291d88494
Signed-off-by: David Pursehouse <david.pursehouse@gmail.com>
5e8e2179b2 (Update Jetty to
9.4.1.v201470120, 2017-01-26) updated Jetty in the maven build.
Update the buck build to match so buck builds work again.
The buck build will go away soon, but in the meantime (until the bazel
build gets the same level of support) it is convenient as a faster way
of running tests than using maven.
The bazel build doesn't need this change since it doesn't build or run
http tests yet.
Change-Id: Ibbdaf2880e76b32fc9f6b5605a2ff29e3deffda2
(cherry picked from commit 2470f01d0f)
MappedLoginService is no longer available in Jetty 9.4 therefore base
TestLoginService on AbstractLoginService.
Apparently Jetty now uses slf4j hence adapt RecordingLogger accordingly
so we can log error messages containing slf4j style formatting anchors
"{}".
Change-Id: Ibb36aba8782882936849b6102001a88b699bb65c
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
(cherry picked from commit 5e8e2179b2)
Extend FetchCommand to expose a new method, setRecurseSubmodules(mode),
which allows to set the mode to ON, OFF or ON_DEMAND.
After fetching a repository, its submodules are recursively fetched:
- When the mode is YES, submodules are always fetched.
- When the mode is NO, submodules are not fetched.
- When the mode is ON_DEMAND, submodules are only fetched when the
parent repository receives an update of the submodule and the new
revision is not already in the submodule.
The mode is determined in the following order of precedence:
- Value specified in the API call using setRecurseSubmodules.
- Value specified in the repository's config under the key
submodule.name.fetchRecurseSubmodules
- Defaults to ON_DEMAND if neither of the previous is set.
Extend FetchResult to recursively include results for submodules, as
a map of the submodule path to an instance of FetchResult.
Test setup is based on testCloneRepositoryWithNestedSubmodules.
Change-Id: Ibc841683763307cb76e78e142e0da5b11b1add2a
Signed-off-by: David Pursehouse <david.pursehouse@gmail.com>
This operation was added recently with the goal to provide some
way to auto-correct invalid user input, or to provide a correction
suggestion to the user -- EGit uses it now that way. But the initial
implementation was very restrictive; it removed all non-ASCII
characters and even slashes.
Understandably end users were not happy with that. Git has no such
restriction to ASCII-only; nor does JGit. Branch names should be
meaningful to the end user, and if a user-supplied branch name is
invalid for technical reasons, a "normalized" name should still
be meaningful to the user.
Rewrite to attempt a minimal fix such that the result will pass
isValidRefName.
* Replace all Unicode whitespace by underscore.
* Replace troublesome special characters by dash.
* Collapse sequences of underscores, dots, and dashes.
* Remove underscores, dots, and dashes following slashes, and
collapse sequences of slashes.
* Strip leading and trailing sequences of slashes, dots, dashes,
and underscores.
* Avoid the ".lock" extension.
* Avoid the Windows reserved device names.
* If input name is null return an empty String so callers don't need to
check for null.
This still allows branch names with single slashes as separators
between components, avoids some pitfalls that isValidRefName() tests
for, and leaves other character untouched and thus allows non-ASCII
branch names.
Also move the function from the bottom of the file up to where
isValidRefName is implemented.
Bug: 512508
Change-Id: Ia0576d9b2489162208c05e51c6d54e9f0c88c3a7
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Update SHA1 class to include a Java port of sha1dc[1]'s ubc_check,
which can detect the attack pattern used by the SHAttered[2] authors.
Given the shattered example files that have the same SHA-1, this
modified implementation can identify there is risk of collision given
only one file in the pair:
$ jgit ...
[main] WARN org.eclipse.jgit.util.sha1.SHA1 - SHA-1 collision 38762cf7f55934b34d179ae6a4c80cadccbb7f0a
When JGit detects probability of a collision the SHA1 class now warns
on the logger, reporting the object's SHA-1 hash, and then throws a
Sha1CollisionException to the caller.
From the paper[3] by Marc Stevens, the probability of a false positive
identification of a collision is about 14 * 2^(-160), sufficiently low
enough for any detected collision to likely be a real collision.
git-core[4] may adopt sha1dc before the system migrates to an entirely
new hash function. This commit enables JGit to remain compatible with
that move to sha1dc, and help protect users by warning if similar
attacks as SHAttered are identified.
Performance declined about 8% (detection off), now:
MessageDigest 238.41 MiB/s
MessageDigest 244.52 MiB/s
MessageDigest 244.06 MiB/s
MessageDigest 242.58 MiB/s
SHA1 216.77 MiB/s (was ~240.83 MiB/s)
SHA1 220.98 MiB/s
SHA1 221.76 MiB/s
SHA1 221.34 MiB/s
This decline in throughput is attributed to the step loop unrolling in
compress(), which was necessary to easily fit the UbcCheck logic into
the hash function. Using helper functions s1-s4 reduces the code
explosion, providing acceptable throughput.
With detection enabled (default):
SHA1 detectCollision 180.12 MiB/s
SHA1 detectCollision 181.59 MiB/s
SHA1 detectCollision 181.64 MiB/s
SHA1 detectCollision 182.24 MiB/s
sha1dc (native C) ~206.28 MiB/s
sha1dc (native C) ~204.47 MiB/s
sha1dc (native C) ~203.74 MiB/s
Average time across 100,000 calls to hash 4100 bytes (such as a commit
or tree) for the various algorithms available to JGit also shows SHA1
is slower than MessageDigest, but by an acceptable margin:
MessageDigest 17 usec
SHA1 18 usec
SHA1 detectCollision 22 usec
Time to index-pack for git.git (217982 objects, 69 MiB) has increased:
MessageDigest SHA1 w/ detectCollision
------------- -----------------------
20.12s 25.25s
19.87s 25.48s
20.04s 25.26s
avg 20.01s 25.33s +26%
Being implemented in Java with these additional safety checks is
clearly a penalty, but throughput is still acceptable given the
increased security against object name collisions.
[1] https://github.com/cr-marcstevens/sha1collisiondetection
[2] https://shattered.it/
[3] https://marc-stevens.nl/research/papers/C13-S.pdf
[4] https://public-inbox.org/git/20170223230621.43anex65ndoqbgnf@sigill.intra.peff.net/
Change-Id: I9fe4c6d8fc5e5a661af72cd3246c9e67b1b9fee6
The TreeWalk filtering classes need to support the three different
meanings of the return value the path comparison generates.
A new path comparison method (isPathMatch) is created with
three distinct return values (isPathPrefix use value '0' to
encode two of these) which will makes it possible for the logical
operators (especially NOT) to aggregate a correct verdict.
A filter like: AND(Path("path"), NOT(Path("path/to/other")))
Should filter out 'path/to/other/file', but not 'path/to/my/file'.
The path-limiting feature when testing path/to/my/file, would
result to run test for the following paths:
path
path/to
path/to/my
path/to/my/file
isPathPrefix('path/to/other') will return '0' for the first two
and since there is no way for NOT to distinguish between an exact
match and a match indicating that the tested path is a 'parent',
it will incorrectly return false and thus remove everything below
'path' immediately.
isPathMatch has a distinguished value for 'parent' matches that
will be preserved through the logic operators and should not
cause an over-eager removal of paths.
The functionality of isPathPrefix is required by other parts
and is untouched.
Unit tests are included to ensure that the logical functionality
is correct and can be preserved.
Change-Id: Ice2ca9406f09f1b179569e99b86a0e5d77baa20d
Signed-off-by: Magnus Vigerlöf <magnus.vigerlof@gmail.com>
David Pursehouse
Matthias Sohn
Luca Milanesio
David Ostrovsky
Jonathan Nieder
Andrey Loskutov
Thomas Wolf
Shawn Pearce
Magnus Vigerlöf