Include the net.i2p.crypto.eddsa bundle via a hard dependency.
Add tests for dealing with ed25519 host keys and user key files.
Manual tests: fetching from git.eclipse.org with an ed25519 user key,
and pushing this change itself using the same ed25519 key.
Note that sshd 2.0.0 does not yet support encrypted ed25519 private
keys.
Bug: 541272
Change-Id: I7072f4014d9eca755b4a2412e19c086235e5eae9
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
The new dependency to mockito for JDKHttpConnectionTest wasn't added for
bazel test run.
Change-Id: Ie967b7152340a0b3e05cced7eadfd40af78d9995
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Create the bundle and move the SshTestGitServer there. Verified that
the Eclipse build still works and ran JSchSshTest and ApacheSshTest as
junit tests inside Eclipse.
Update maven build and features to account for that. Verified by
running full maven build including packaging.
Update bazel build files to account for that. Verified by a
clean-slate bazel build :all, followed by running the JSchSshTest
and the ApacheSshTest via bazel.
Change-Id: Ia084942f4425b454529de148e00417e7da786a90
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
Add a new ssh client implementation based on Apach MINA sshd 2.0.0.
This implementation uses JGit's own config file parser and host entry
resolver. Code inspection of the Apache MINA implementation revealed
a few bugs or idiosyncrasies that immediately would re-introduce bugs
already fixed in the past in JGit.
Apache MINA sshd is not without quirks either, and I had to configure
and override more than I had expected. But at least it was all doable
in clean ways.
Apache MINA boasts support for Bouncy Castle, so in theory this should
open the way to using more ssh key algorithms, such as ed25519.
The implementation is in a separate bundle and is still not used in
the core org.eclipse.jgit bundle. The tests re-use the ssh tests from
the core test bundle.
Bug: 520927
Change-Id: Ib35e73c35799140fe050d1ff4fb18d0d3596580e
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
Add a simple ssh git server based on Apache MINA sshd, and use it
in new tests that verify ssh operations and in particular a number
of bugs that had cropped up over time in JSch.
The git server supports fetching only, and sftp access.
The tests are all in an abstract base class; the concrete JschSshTest
class only provides ssh-specific test setup. So the same tests could
be run easily also with some other ssh client.
Bug: 520927
Change-Id: Ide6687b717fb497a29fc83f22b07390a26dfce1d
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
Without this, commands like "jgit repo" that use commons-logging fail.
Change-Id: Ia78198c5e15ac4d6152d832ab2a2498f625486d2
Signed-off-by: Jonathan Nieder <jrn@google.com>
Recent Bazel versions support the hyphen character in external
repository names. On the Gerrit project, the repository names
were harmonized to consistently use hyphen.
As a side effect, it is no longer possible to build jgit from source
in the gerrit tree, due to the different repository names.
Rename the dependencies to use hyphens, consistent with gerrit.
Change-Id: Ideebd858ddd3f0e6f765643001642dfb6c12441f
Signed-off-by: David Pursehouse <david.pursehouse@gmail.com>
Recent Bazel versions support the hyphen character in external
repository names. On the Gerrit project, the repository names
were harmonized to consistently use hyphen.
As a side effect, it is no longer possible to build jgit from source
in the gerrit tree, due to the different repository names.
Rename the dependencies to use hyphens, consistent with gerrit.
Change-Id: Ideebd858ddd3f0e6f765643001642dfb6c12441f
Signed-off-by: David Pursehouse <david.pursehouse@gmail.com>
com.jcraft.jsch requires com.jcraft.jzlib to provide optional zlib
packet compression support. Add this library so that jgit can handle
packet compression.
CQ: 15292
Bug: 529129
Change-Id: I0297bd0488753547a5f5d47dbf0db508a79dd265
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Make jsch visible to the test bundle and add the dependency.
Change-Id: I0c49ee9b8f64fe8a8c74d2f08865917eb33069b4
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
Update to the latest 9.3 version until we have a solution for bug 514336
we face with 9.4.x versions.
Change-Id: I6d8d476abe8677ce865a08099bb77330effc700a
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
In I3ab958ce8 explicit dependency in lib/BUILD were defined and most
of the bazel build implementation was switched to using it. Switch
test.bzl test implementation to using explicit dependencies as well.
Change-Id: I4413d1a45addeeb2a980d07669fa034c2eebb3a4
Signed-off-by: David Ostrovsky <david@ostrovsky.org>
Add bazel build for ui and junit.http, and the test packages.
A number of different test labels are supported:
api
attributes
dfs
diff
http
lfs
lfs-server
nls
notes
pack
patch
pgm
reftree
revplot
revwalk
storage
submodule
symlinks
transport
treewalk
util
To run all tests:
bazel test //...
To run specific tests, using labels:
bazel test --test_tag_filters=api,dfs,revplot,treewalk //...
Change-Id: Ic41b05a79d855212e67b1b4707e9c6b4dc9ea70d
Signed-off-by: David Ostrovsky <david@ostrovsky.org>
Signed-off-by: Jonathan Nieder <jrn@google.com>
Only testonly targets (such as tests) need to use junit.
In particular this involves making the toplevel :all rule testonly.
It's not clear to me what that rule is for --- "bazel build //..."
already works to build all targets. In any case it appears to be for
testing, so marking it as testonly shouldn't be harmful.
Change-Id: I28ff508ab8ce2ec0a0111109110aa9680d30600e
This provides a place to declare visibility restrictions and
transitive dependencies for each library.
Other targets should only declare dependencies on what they directly
use, making dependencies easier to maintain.
Trim the dependencies of org.eclipse.jgit:jgit to follow that rule.
It declares dependencies on Apache httpcomponents and the servlet
API but doesn't use them.
Tested:
* 'bazel build //...' succeeds
* applying the change https://gerrit-review.googlesource.com/90843
to a copy of Gerrit, following the instructions there, and running
'bazel test //...' in that copy of Gerrit still succeeds
Change-Id: I3ab958ce8b3227019cdbe4cc81e0f042e1541034
5e8e2179b2 (Update Jetty to
9.4.1.v201470120, 2017-01-26) updated Jetty in the maven build.
Update the buck build to match so buck builds work again.
The buck build will go away soon, but in the meantime (until the bazel
build gets the same level of support) it is convenient as a faster way
of running tests than using maven.
The bazel build doesn't need this change since it doesn't build or run
http tests yet.
Change-Id: Ibbdaf2880e76b32fc9f6b5605a2ff29e3deffda2
(cherry picked from commit 2470f01d0f)
5e8e2179b2 (Update Jetty to
9.4.1.v201470120, 2017-01-26) updated Jetty in the maven build.
Update the buck build to match so buck builds work again.
The buck build will go away soon, but in the meantime (until the bazel
build gets the same level of support) it is convenient as a faster way
of running tests than using maven.
The bazel build doesn't need this change since it doesn't build or run
http tests yet.
Change-Id: Ibbdaf2880e76b32fc9f6b5605a2ff29e3deffda2
Use Oxygen M3 Orbit repository which provides the bundles built using
the new orbit-recipe based build.
CQ: 11658
Change-Id: I7f3dcc966732b32830c75d5daa55383bd028d182
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Implement LfsProtocolServlet handling the "Git LFS v1 Batch API"
protocol [1]. Add a simple file system based LFS content store and the
debug-lfs-store command to simplify testing.
Introduce a LargeFileRepository interface to enable additional storage
implementation while reusing the same protocol implementation.
At the client side we have to configure the lfs.url, specify that
we use the batch API and we don't use authentication:
[lfs]
url = http://host:port/lfs
batch = true
[lfs "http://host:port/lfs"]
access = none
the git-lfs client appends the "objects/batch" to the lfs.url.
Hard code an Authorization header in the FileLfsRepository.getAction
because then git-lfs client will skip asking for credentials. It will
just forward the Authorization header from the response to the
download/upload request.
The FileLfsServlet supports file content storage for "Large File
Storage" (LFS) server as defined by the Github LFS API [2].
- upload and download of large files is probably network bound hence use
an asynchronous servlet for good scalability
- simple object storage in file system with 2 level fan-out
- use LockFile to protect writing large objects against multiple
concurrent uploads of the same object
- to prevent corrupt uploads the uploaded file is rejected if its hash
doesn't match id given in URL
The debug-lfs-store command is used to run the LfsProtocolServlet and,
optionally, the FileLfsServlet which makes it easier to setup a
local test server.
[1]
https://github.com/github/git-lfs/blob/master/docs/api/http-v1-batch.md
[2] https://github.com/github/git-lfs/tree/master/docs/api
Bug: 472961
Change-Id: I7378da5575159d2195138d799704880c5c82d5f3
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Signed-off-by: Sasa Zivkov <sasa.zivkov@sap.com>
Running tests using buck reveals that HttpClientTests are broken
and weren't executed by Maven since these test classes don't match the
maven-surefire-plugin's default for test classes **/*Test.java.
Will be fixed in a follow-up change.
Change-Id: I82a01b5fd3f0a930bec2423a29a256601dadc248
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Compile each test in its own java_test() target so they can run in
parallel, reducing total time spent testing on large machines.
$ buck test --all
[-] PROCESSING BUCK FILES...FINISHED 0.3s [100%]
[-] BUILDING...FINISHED 2.9s [100%] (351/383 JOBS, 351 UPDATED, 0.0% CACHE MISS)
[-] TESTING...FINISHED 98.1s (3360 PASS/15 SKIP/0 FAIL)
Change-Id: I8d6541268315089299f933ed23d785b1b3431133
Construct the java_application JAR wrapped with the shell script
header. This is enough to clone a repository over HTTPs:
$ buck build :jgit_bin
$ buck-out/gen/jgit_bin/jgit_bin clone https://...
Change-Id: I4aceb4e77b2ec9be76a32ec93d94f2dafe9acce6
Today there are plenty of modern build tool systems available in the
wild (in no particular order):
* http://bazel.io
* https://pantsbuild.github.io
* http://shakebuild.com
* https://ninja-build.org
* https://buckbuild.com
The attributes, that all these build tools have in common, are:
* reliable
* correct
* very fast
* reproducible
It must not always be the other build tool, this project is currently
using. Or, quoting Gerrit Code Review maintainer here:
"Friends, don't let friends use <the other build tool system>!"
This change is non-complete implementation of JGit build in Buck,
needed by Gerrit Code Review to replace its dependency with standlone
JGit cell. This is very useful when a developer is working on both
projects and is trying to integrate changes made in JGit in Gerrit.
The supported workflow is:
$ cd jgit
$ emacs <hack>
$ cd ../gerrit
$ buck build --config repositories.jgit=../jgit gerrit
With --config repositories.jgit=../jgit jgit cell is routed through
JGit development tree.
To build jgit, issue:
$ buck build //:jgit
[-] PROCESSING BUCK FILES...FINISHED 0,0s
Yes, you can't measure no-op build time, given that Buck daemon is
used.
Change-Id: I301a71b19fba35a5093d8cc64d4ba970c2877a44
Signed-off-by: David Ostrovsky <david@ostrovsky.org>
David Pursehouse
Thomas Wolf
Matthias Sohn
Jonathan Nieder
Gabriel Couto
Han-Wen Nienhuys
David Ostrovsky
Dave Borowitz
Shawn Pearce