See bug 484951 comment 4: "jgit status -- a b" doesn't work and
complains that "b" is not an allowed argument
Bug: 484951
Change-Id: I86b81e7f2bab6e928bb8e973bd50c8f4b9c6fecf
Signed-off-by: Andrey Loskutov <loskutov@gmx.de>
Fixes point 4 in bug 484951, where "jgit repo" or "jgit repo -h" dumps a
stack trace.
Bug: 484951
Change-Id: Ic8b362e07a40ad923dc9acde0c0983a1e7932a02
Signed-off-by: Andrey Loskutov <loskutov@gmx.de>
Signal early command termination due '-h' or '--help' option via
TerminatedByHelpException. This allows tests using
CLIGitCommand differentiate between unexpected command parsing errors
and expected command cancellation "on help" (which also allows
validation of expected/unexpected help messages).
Additional side-effect: jgit supports now git style of handling help
option: any unexpected command line options before help are reported as
errors, but after help ignored.
Bug: 484951
Change-Id: If45c41c0d32895ab6822a7ff9d851877dcef5771
Signed-off-by: Andrey Loskutov <loskutov@gmx.de>
JGit CLI should allow to do this: checkout -- <path>
Currently, even if "a" is a valid path in the git repo, jgit CLI can't
checkout it:
$jgit checkout -- a
error: pathspec 'a' did not match any file(s) known to git.
The fix also fixes at same time "unnamed" zombie "[VAL ...]" argument
shown on the command line.
Before fix:
$jgit -h
jgit checkout name [VAL ...] [-- path ... ...] [--force (-f)] [--help
(-h)] [--orphan] [-b]
After fix:
$jgit -h
jgit checkout [name] [-- path ... ...] [--force (-f)] [--help (-h)]
[--orphan] [-b]
Bug: 475765
Change-Id: I2b0e77959a72e4aac68452dc3846adaa745b0831
Signed-off-by: Andrey Loskutov <loskutov@gmx.de>
Pushing with JGit commandline to e.g. Github failed with "unauthorized"
since HttpUrlConnection calls the configured authenticator implicitly.
The problem is that during a push two requests are sent to the server,
first a GET and then a POST (containing the pack data). The first GET
request sent anonymously is rejected with 401 (unauthorized). When an
Authenticator is installed the java.net classes will use the
Authenticator to ask the user for credentials and retry the request.
But this happens under the hood and JGit level code doesn't see that
this happens.
The next request is the POST but since JGit thinks the first GET request
went through anonymously it doesn't add authentication headers to the
POST request. This POST of course also fails with 401 but since this
request contains a lot of body-data streamed from JGit (the pack file!)
the java.net classes can't simply retry the request with authorization
headers. The whole process fails.
Fix this by using Apache httpclient which doesn't use Authenticator to
retrieve credentials. Instead initialize TransportCommand to use the
default credential provider if no other credentials provider was set
explicitly. org.eclipse.jgit.pgm.Main sets this default for the JGit
command line client.
Change-Id: Ic4e0f8b60d4bd6e69d91eae0c7e1b44cdf851b00
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
This change fixes all compiler errors in JGit and replaces possible
NPE's with either appropriate exceptions, avoiding multiple "Nullable
return" method calls or early returning from the method.
Change-Id: I24c8a600ec962d61d5f40abf73eac4203e115240
Signed-off-by: Andrey Loskutov <loskutov@gmx.de>
This should mirror the behavior of `git push --atomic` where the
client asks the server to apply all-or-nothing. Some JGit servers
already support this based on a custom DFS backend. InMemoryRepository
is extended to support atomic push for unit testing purposes.
Local disk server side support inside of JGit is a more complex animal
due to the excessive amount of file locking required to protect every
reference as a loose reference.
Change-Id: I15083fbe48447678e034afeffb4639572a32f50c
org.eclipse.jgit.lib.Repository class is an example of the API which
should be written with Java 8 java.util.Optional<T> type. Unfortunately
this API is already released and widely used. The good clients are
currently doing their best with checking return values for null and bad
clients do not know how bad their code is.
I've tried not to change any logic and to be as less intrusive as
possible. Most of the JGit code was well prepared to this, only few
classes needed some smaller fixes.
This change fixes all compiler errors in JGit and replaces possible
NPE's with either appropriate exceptions, avoiding multiple "Nullable
return" method calls or early returning from the method.
Because annotating getDirectory() and getFS() as Nullable would cause
lot of additional changes in JGit and EGit they are postponed.
Change-Id: Ie8369d2c9c5fac5ce83b3b1b9bc217d7b55502a3
Signed-off-by: Andrey Loskutov <loskutov@gmx.de>
Add the --verify option to be more compatible with git
Change-Id: I225a36ecc4711fd2eb9af67ca8fb79681d94c587
Signed-off-by: Thomas Meyer <thomas.mey@web.de>
Update the project-specific Eclipse settings to replace the use of the
org.eclipse.jdt.annotation.Nullable class the new JGit-specific
@Nullable annotation. I verified that Eclipse reports errors when the
return value of a method annotated with
@org.eclipse.jgit.annotations.Nullable is dereferenced without a null
check.
Also remove the Maven and MANIFEST.MF dependencies on
org.eclipse.jdt.annotation.
Eclipse null analysis uses three annotations: @Nullable, @NonNull and
@NonNullByDefault. All three are updated in this patch because it is
invalid to set the Eclipse preferences to empty values. So far only
@Nullable has been introduced in org.eclipse.jgit.annotations.
My personal preference is to follow the advice in Effective Java and
avoid the null-return idiom, and to avoid passing null values in
general. This sets the expectation is that arguments and return types
are assumed non-null unless otherwise documented. If that is the
expectation, then consistent application of @NonNull is redundant and
hurts readability by cluttering the code, obscuring the occasional
@Nullable annotation that really requires attention.
If the JGit community decides there is value in using the @NonNull and
@NonNullByDefault annotations we can add them--this change configures
Eclipse to use them.
Change-Id: I9af1b786d1b44b9b0d9c609480dc842df79bf698
Signed-off-by: Terry Parker <tparker@google.com>
On a server also running Gerrit that is using RepoCommand to
convert from an XML manifest to a git submodule superproject
periodically, it would be handy to be able to use Gerrit's
submodule subscription feature[1] to update the superproject
automatically between RepoCommand runs as changes are merged
in each subprojects.
This requires setting the 'branch' field for each submodule
so that Gerrit knows what branch to watch. Add an option to
do that.
Setting the branch field also is useful for plain Git users,
since it allows them to use "git submodule update --remote" to
manually update all submodules between RepoCommand runs.
[1] https://gerrit-review.googlesource.com/Documentation/user-submodules.html
Change-Id: I1a10861bcd0df3b3673fc2d481c8129b2bdac5f9
Signed-off-by: Stefan Beller <sbeller@google.com>
This header was removed unintentionally from some bundles in
3a4a5a4e57. Restore it to ensure lazy
activation of bundles.
Change-Id: I1f841f978fb93278e3ec0533a01f1363510dd976
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
In Bug 476164 it was reported that EGit doesn't start when the platform
comes with jsch 0.1.51 while this version of EGit/JGit brings jsch
0.1.53. This could be caused by outdated uses-clauses. Hence recompute
them using PDE tooling.
Bug: 476164
Change-Id: I185ba097884ead9cd034eba842bd3bf34181a99b
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
In addition to honor the http_proxy variable for setting a proxy for
http JGit should also honor the https_proxy variable to set a similar
proxy for https traffic
Bug: 473365
Change-Id: I1002cb575e26cd842bf81ad751ec7c267b585ce2
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Applications that use a commit message once and do not
need it again can free the body to save memory. Expose
the disposeBody() methods to support this and use it in
pgm.Log which only visits each commit once.
Change-Id: I4142a0749c24f15386ee7fb119934a0432234de3
Andrey Loskutov
Rüdiger Herrmann
Matthias Sohn
Kaloyan Raev
Shawn Pearce
Thomas Meyer
Terry Parker
Stefan Beller
David Pursehouse
Christian Halstrick