BlameGenerator digs through history and discovers the origin of each
line of some result file. BlameResult consumes the stream of regions
created by the generator and lays them out in a table for applications
to display alongside of source lines.
Applications may optionally push in the working tree copy of a file
using the push(String, byte[]) method, allowing the application to
receive accurate line annotations for the working tree version. Lines
that are uncommitted (difference between HEAD and working tree) will
show up with the description given by the application as the author,
or "Not Committed Yet" as a default string.
Applications may also run the BlameGenerator in reverse mode using the
reverse(AnyObjectId, AnyObjectId) method instead of push(). When
running in the reverse mode the generator annotates lines by the
commit they are removed in, rather than the commit they were added in.
This allows a user to discover where a line disappeared from when they
are looking at an older revision in the repository. For example:
blame --reverse 16e810b2..master -L 1080, org.eclipse.jgit.test/tst/org/eclipse/jgit/storage/file/RefDirectoryTest.java
( 1080) }
2302a6d3 (Christian Halstrick 2011-05-20 11:18:20 +0200 1081)
2302a6d3 (Christian Halstrick 2011-05-20 11:18:20 +0200 1082) /**
2302a6d3 (Christian Halstrick 2011-05-20 11:18:20 +0200 1083) * Kick the timestamp of a local file.
Above we learn that line 1080 (a closing curly brace of the prior
method) still exists in branch master, but the Javadoc comment below
it has been removed by Christian Halstrick on May 20th as part of
commit 2302a6d3. This result differs considerably from that of C
Git's blame --reverse feature. JGit tells the reader which commit
performed the delete, while C Git tells the reader the last commit
that still contained the line, leaving it an exercise to the reader
to discover the descendant that performed the removal.
This is still only a basic implementation. Quite notably it is
missing support for the smart block copy/move detection that the C
implementation of `git blame` is well known for. Despite being
incremental, the BlameGenerator can only be run once. After the
generator runs it cannot be reused. A better implementation would
support applications browsing through history efficiently.
In regards to CQ 5110, only a little of the original code survives.
CQ: 5110
Bug: 306161
Change-Id: I84b8ea4838bb7d25f4fcdd540547884704661b8f
Signed-off-by: Kevin Sawicki <kevin@github.com>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Chris Aniszczyk <caniszczyk@gmail.com>
There is no reason for this type to contain an ArrayList and try to
hide the implementation. It only slows down execution by adding an
extra layer of method dispatch to each invocation.
Instead subclass from ArrayList.
Change-Id: Ifbb9c7060c2fe3d5a7397c1aa85fbade14088637
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Some servlet containers require the servlet to read the EOF marker
from the input stream before a response can be output if the stream
is using "Transfer-Encoding: chunked"... which is typical for any
sort of large push to a repository over smart HTTP.
Ensure the EOF is always read by the PackParser when it is handling
the stream, and fail fast if there is more data present than expected
since this does indicate a protocol error.
Also ensure the EOF is read by UploadPack before it starts to output
a partial response using packing progress meters.
Change-Id: I131db9dea20b2324cb7c3272a814f21296bc64bd
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
When cloning into a bare repository we should not create remote
tracking branches (e.g refs/remotes/origin/testX). Branches of the
remote repository should but fetched into into branches of the same
name (e.g refs/heads/testX). Also add the noCheckout option which
would prevent checkout after fetch.
Change-Id: I5d4cc0389f3f30c53aa0065f38119af2a1430909
Signed-off-by: Christian Halstrick <christian.halstrick@sap.com>
RefDirectory was not using FileSnapshot correctly in all places. This
is fixed with this commit. Additionally the constructors for the
different types of refs have been changed to take a FileSnapshot
instead of a modification time.
Change-Id: Ifb6a59e87e8b058a398c38cdfb9d648f0bad4bf8
Signed-off-by: Christian Halstrick <christian.halstrick@sap.com>
RefData now uses a sequence number as part of the field, ensuring
that updates always increase the sequence number by one whenever
a reference is modified.
Attaching a sequence number to RefData will help with storing
reference log entries during updates. As the sequence number should
be unique within the reference name space, log entries can be keyed
by the sequence number and remain unique. Making this work over
reference delete-create cycles will require an additional RefTable
API to return the oldest sequence number previously used in the
reference log to seed the recreated reference.
Change-Id: I11cfff2a96ef962e57f29925a3eef41bdbf9f9bb
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Chris Aniszczyk <caniszczyk@gmail.com>
Adds a class which can be used to calculates a SHA1 of the diff
associated with a patch, similar to git patch-id.
In this version whitespace is not ignored.
Change-Id: I421d15ea905e23df543082786786841cbe3ef10d
Signed-off-by: Stefan Lay <stefan.lay@sap.com>
Signed-off-by: Chris Aniszczyk <caniszczyk@gmail.com>
EGit change Iba3b87293c22e5fe7d989fc312184aa7463c4387 is also required
to make this work for EGit.
Change-Id: Iedc80e133e66d72e78ff0980b6e12634f75eca36
Signed-off-by: Carsten Pfeiffer <carsten.pfeiffer@gebit.de>
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Since this change may affect performance and memory consumption on every
access to a loose ref I explicitly made it a RFC to collect opinions.
Previously RefDirectory.scanRef() was not detecting an update of a
loose ref when the update didn't changed the modification time of
the backing file. RefDirectory cached loose refs and the way to detect
outdated cache entries was to compare lastmodification timestamp on the
file representing the ref. If two updates to the same ref happen faster
than the filesystem-timer granularity (for linux this is 2 seconds)
there is the possiblity that we don't detect the update.
Because of this bug EGit's PushOperationTest only works with 2 second
sleeps inside.
This change let RefDirectory use FileSnapshot to detect such situations.
FileSnapshot helps to remember when a file was last read from disk and
therefore enables to decide when to load a file from disk although
modification time has not changed.
Change-Id: I03b9a137af097ec69c4c5e2eaa512d2bdd7fe080
Signed-off-by: Christian Halstrick <christian.halstrick@sap.com>
Signed-off-by: Chris Aniszczyk <caniszczyk@gmail.com>
A checkout conflict during rebase setup should leave the repository
in SAFE state which means ensuring that the rebase temporary files
need to be removed.
Bug: 346813
Change-Id: If8b758fde73ed5a452a99a195a844825a03bae1a
Signed-off-by: Chris Aniszczyk <caniszczyk@gmail.com>
Change Ia2ab4f8dc95020f2914ff01c2bf3b1bc62a9d45d added merge
support for when OURS or THEIRS was simultaneously deleted
and modified. That changeset however did not add create an
entry in the conflicts table so clients would see a CONFLICTING
result but getConflicts() would return null.
This change creates a MergeResult for the conflicting file.
Bug: 345684
Change-Id: I52acb81c1729b49c9fb3e7a477c6448d8e55c317
Signed-off-by: Chris Aniszczyk <caniszczyk@gmail.com>
Change Ib9898fe0f982fa08e41f1dca9452c43de715fdb6 added support for
the 'cherry-pick' fast forward case where the upstream commit history
does not include any merge commits. This change adds support for the
case where merge commits exist and the local branch has no changes.
Bug: 344779
Change-Id: If203ce5aa1b4e5d4d7982deb621b710e71f4ee10
Signed-off-by: Chris Aniszczyk <caniszczyk@gmail.com>
Previously when merging two contents with a non-empty base and one of
the contents was empty (size == 0) and the other was modified there
was a potentially expensive calculation until we finally always come
to the same result -> the complete non-deleted content should collide
with the empty content.
This proposal adds an optimization to detect empty input content and
to produce the appropriate result immediatly.
Change-Id: Ie6a837260c19d808f0e99173f570ff96dd22acd3
Signed-off-by: Christian Halstrick <christian.halstrick@sap.com>
For the following patch on the linux 2.6.32 tag:
--- a/kernel/sched_fair.c
+++ b/kernel/sched_fair.c
@@ -685,6 +685,7 @@ static void enqueue_sleeper(struct cfs_rq *cfs_rq, struct sc
static void check_spread(struct cfs_rq *cfs_rq, struct sched_entity *se)
{
+#if 0
#ifdef CONFIG_SCHED_DEBUG
s64 d = se->vruntime - cfs_rq->min_vruntime;
@@ -694,6 +695,7 @@ static void check_spread(struct cfs_rq *cfs_rq, struct
sched
if (d > 3*sysctl_sched_latency)
schedstat_inc(cfs_rq, nr_spread_over);
#endif
+#endif
}
static void
JGit produced an incorrect diff, attempting to add a new "}" instead
of the new "#endif" at the end of the hunk. This was caused by a prior
fix for bug 328895 where we wanted to "slide" a diff down in the file
when adding a new method/function and want to show the closing curly
brace as being added after the new method, rather than added onto the
end of the prior function or method just before the insertion point.
Bug: 345956
Change-Id: I32b9e24f1e2980258b1b39dd1807919ab1c5f9b2
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
The problem occurred when the first text ends in the middle
of the last line of the other text and the first text has no
end of line.
Bug: 344975
Change-Id: I1f0dd9f8062f2148a7c1341c9122202e082ad19d
Signed-off-by: Robin Rosenberg <robin.rosenberg@dewire.com>
This makes the message look the same as in C Git (the "."):
This reverts commit <sha1>.
Change-Id: I4c254c122277b127e7b039c0d1c7f7a0d691530d
Signed-off-by: Robin Stocker <robin@nibor.org>
Since d1718a the method getHumanishName was broken on windows since
the URIish is not normalized anymore. For a path like
"C:\gitRepositories\egit" the whole path was returned instead of
"egit".
Bug: 343519
Change-Id: I95056009072b99d32f288966302d0f8188b47836
Signed-off-by: Stefan Lay <stefan.lay@sap.com>
Before this change any files in the conflicting set would
also be listed in the the other IndexDiff Sets which is
confusing. With this change a conflicting file will not
be included in any of the other sets.
Change-Id: Ife9f2652685220bcfddc1f9820423acdcd5acfdc
Signed-off-by: Chris Aniszczyk <caniszczyk@gmail.com>
Submodules are supposed to be handled by separate operations, so
we should ignore them on checkout, just like C Git does.
This fix does not add submodule support. We just try harder
to ignore them.
Bug: 343566
Change-Id: I2c5ae1024ea7bb57adf27072da6acc9643018eda
Signed-off-by: Robin Rosenberg <robin.rosenberg@dewire.com>
jgit.storage.dht is a storage provider implementation for JGit that
permits storing the Git repository in a distributed hashtable, NoSQL
system, or other database. The actual underlying storage system is
undefined, and can be plugged in by implementing 7 small interfaces:
* Database
* RepositoryIndexTable
* RepositoryTable
* RefTable
* ChunkTable
* ObjectIndexTable
* WriteBuffer
The storage provider interface tries to assume very little about the
underlying storage system, and requires only three key features:
* key -> value lookup (a hashtable is suitable)
* atomic updates on single rows
* asynchronous operations (Java's ExecutorService is easy to use)
Most NoSQL database products offer all 3 of these features in their
clients, and so does any decent network based cache system like the
open source memcache product. Relying only on key equality for data
retrevial makes it simple for the storage engine to distribute across
multiple machines. Traditional SQL systems could also be used with a
JDBC based spi implementation.
Before submitting this change I have implemented six storage systems
for the spi layer:
* Apache HBase[1]
* Apache Cassandra[2]
* Google Bigtable[3]
* an in-memory implementation for unit testing
* a JDBC implementation for SQL
* a generic cache provider that can ride on top of memcache
All six systems came in with an spi layer around 1000 lines of code to
implement the above 7 interfaces. This is a huge reduction in size
compared to prior attempts to implement a new JGit storage layer. As
this package shows, a complete JGit storage implementation is more
than 17,000 lines of fairly complex code.
A simple cache is provided in storage.dht.spi.cache. Implementers can
use CacheDatabase to wrap any other type of Database and perform fast
reads against a network based cache service, such as the open source
memcached[4]. An implementation of CacheService must be provided to
glue this spi onto the network cache.
[1] https://github.com/spearce/jgit_hbase
[2] https://github.com/spearce/jgit_cassandra
[3] http://labs.google.com/papers/bigtable.html
[4] http://memcached.org/
Change-Id: I0aa4072781f5ccc019ca421c036adff2c40c4295
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Merging into a non-master branch would result in the following message:
Merge branch 'a' into HEAD
Now the merge message is correct:
Merge branch 'a' into b
Change-Id: I488f97190e4c1711c23a7a3cbd64f8b13a87bbac
Signed-off-by: Robin Stocker <robin@nibor.org>
Duplicates cgit behaviour for merging the case where
OURS is deleted and THEIRS is modified as well as
OURS is modified and THEIRS id deleted.
Change-Id: Ia2ab4f8dc95020f2914ff01c2bf3b1bc62a9d45d
Signed-off-by: Chris Aniszczyk <caniszczyk@gmail.com>
This fix makes sure the readPipe methods drains the stderr
pipe and close the subprocess' stdin stream before reading
the process outputs.
I never managed to repeat the reported problem myself, so this
may help in diagnosing the probelm on other peoples machines.
Bug: 337533
Change-Id: I299555f09768c34d5868327e574326946ee265e1
Smart HTTP clients may request both multi_ack_detailed and no-done in
the same request to prevent the client from needing to send a "done"
line to the server in response to a server's "ACK %s ready".
For smart HTTP, this can save 1 full HTTP RPC in the fetch exchange,
improving overall latency when incrementally updating a client that
has not diverged very far from the remote repository.
Unfortuantely this capability cannot be enabled for the traditional
bi-directional connections. multi_ack_detailed has the client sending
more "have" lines at the same time that the server is creating the
"ACK %s ready" and writing out the PACK stream, resulting in some race
conditions and/or deadlock, depending on how the pipe buffers are
implemented. For very small updates, a server might actually be able
to send "ACK %s ready", then the PACK, and disconnect before the
client even finishes sending its first batch of "have" lines. This
may cause the client to fail with a broken pipe exception. To avoid
all of these potential problems, "no-done" is restricted only to the
smart HTTP variant of the protocol.
Change-Id: Ie0d0a39320202bc096fec2e97cb58e9efd061b2d
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Matthias Sohn
Shawn O. Pearce
Christian Halstrick
Stefan Lay
Abhishek Bhatnagar
Carsten Pfeiffer
Kevin Sawicki
Bernard Leach
Christoph Brill
Ketan Padegaonkar
Chris Aniszczyk
Piotr Janik
Robin Rosenberg
Robin Stocker