- this is a new warning option in Eclipse 4.7 and higher
- we always change version of all bundles in a release to keep release
engineering simple
Change-Id: Ic7523d77b67b2802f1bab3bc70af250d712a034f
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
When a https connection could not be established because the SSL
handshake was unsuccessful, TransportHttp would unconditionally
throw a TransportException.
Other https clients like web browsers or also some SVN clients
handle this more gracefully. If there's a problem with the server
certificate, they inform the user and give him a possibility to
connect to the server all the same.
In git, this would correspond to dynamically setting http.sslVerify
to false for the server.
Implement this using the CredentialsProvider to inform and ask the
user. We offer three choices:
1. skip SSL verification for the current git operation, or
2. skip SSL verification for the server always from now on for
requests originating from the current repository, or
3. always skip SSL verification for the server from now on.
For (1), we just suppress SSL verification for the current instance of
TransportHttp.
For (2), we store a http.<uri>.sslVerify = false setting for the
original URI in the repo config.
For (3), we store the http.<uri>.sslVerify setting in the git user
config.
Adapt the SmartClientSmartServerSslTest such that it uses this
mechanism instead of setting http.sslVerify up front.
Improve SimpleHttpServer to enable setting it up also with HTTPS
support in anticipation of an EGit SWTbot UI test verifying that
cloning via HTTPS from a server that has a certificate that doesn't
validate pops up the correct dialog, and that cloning subsequently
proceeds successfully if the user decides to skip SSL verification.
Bug: 374703
Change-Id: Ie1abada9a3d389ad4d8d52c2d5265d2764e3fb0e
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
Git has a rather elaborate mechanism to specify HTTP configuration
options per URL, based on pattern matching the URL against "http"
subsection names.[1] The URLs used for this matching are always the
original URLs; redirected URLs do not participate.
* Scheme and host must match exactly case-insensitively.
* An optional user name must match exactly.
* Ports must match exactly after default ports have been filled in.
* The path of a subsection, if any, must match a segment prefix of
the path of the URL.
* Matches with user name take precedence over equal-length path
matches without, but longer path matches are preferred over
shorter matches with user name.
Implement this for JGit. Factor out the HttpConfig from TransportHttp
and implement the matching and override mechanism.
The set of supported settings is still the same; JGit currently
supports only followRedirects, postBuffer, and sslVerify, plus the
JGit-specific maxRedirects key.
Add tests for path normalization and prefix matching only on segment
separators, and use the new mechanism in SmartClientSmartServerSslTest
to disable sslVerify selectively for only the test server URLs.
Compare also bug 374703 and bug 465492. With this commit it would be
possible to set sslVerify to false for only the git server using a
self-signed certificate instead of having to switch it off globally
via http.sslVerify.
[1] https://git-scm.com/docs/git-config
Change-Id: I42a3c2399cb937cd7884116a2a32fcaa7a418fcb
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
This is needed to run tests in org.eclipse.jgit.http.test from Eclipse.
The change 7ac1bfc8 which added this dependency to
org.eclipse.jgit.http.test was already merged.
Restrict dependency to org.apache.commons.codec to the
version range [1.6.0,2.0.0).
CQ: 14048
Change-Id: I461a5f6bfc114757061d68992f9bc7ab38622328
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Do not automatically organize imports using a save action since this
seems to be buggy and removed some annotations org.eclipse.jgit.pgm
needs to use args4j.
Change-Id: I5a91292c3b9241ce2dde3e4ecce14ad460097129
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Revert the following save actions which were introduced in c0ad77d8:
- always use braces around blocks
- remove unused imports
Other than I expected save actions are run globally on edited files -
and not only on edited code lines only.
Hence revert the save action "Convert control statement bodies to
blocks" which would affect a large number of code lines not affected by
the change editing some small part of a class. This would generate a
large number of changes which may lead to many unnecessary conflicts.
Total number of affected lines across jgit would be around 10k lines.
Also revert "Remove unused imports" since it erroneously removes imports
of some annotations needed by pgm classes using args4j.
Change-Id: I879a47f68e664129e6124cf25c1ae1f6a2d7a5aa
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Add the following Eclipse save actions executed when saving modified
lines. This should help to reduce manual work needed to maintain a clean
and consistent code style:
- organize imports
- always use braces around blocks
- add missing annotations
- @Override including implementation of interface methods
- @Deprecated
- remove
- unused imports
- unnecessary $NON-NLS$ tags
- redundant type arguments
Also add default values for new settings that were introduced in recent
Eclipse versions up to Neon since we updated save rules the last time.
Change-Id: Idc90b249df044d0552f04edf01a5f607c4846f50
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
The addition of "tooManyRedirects" in commit 7ac1bfc ("Do
authentication re-tries on HTTP POST") was an error I didn't
catch after rebasing that change. That message had been renamed
in the earlier commit e17bfc9 ("Add support to follow HTTP
redirects") to "redirectLimitExceeded".
Also make sure we always use the TransportException(URIish, ...)
constructor; it'll prefix the message given with the sanitized URI.
Change messages to remove the explicit mention of that URI inside the
message. Adapt tests that check the expected exception message text.
For the info logging of redirects, remove a potentially present
password component in the URI to avoid leaking it into the log.
Change-Id: I517112404757a9a947e92aaace743c6541dce6aa
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
There is at least one git server out there (GOGS) that does
not require authentication on the initial GET for
info/refs?service=git-receive-pack but that _does_ require
authentication for the subsequent POST to actually do the push.
This occurs on GOGS with public repositories; for private
repositories it wants authentication up front.
Handle this behavior by adding 401 handling to our POST request.
Note that this is suboptimal; we'll re-send the push data at
least twice if an authentication failure on POST occurs. It
would be much better if the server required authentication
up-front in the GET request.
Added authentication unit tests (using BASIC auth) to the
SmartClientSmartServerTest:
- clone with authentication
- clone with authentication but lacking CredentialsProvider
- clone with authentication and wrong password
- clone with authentication after redirect
- clone with authentication only on POST, but not on GET
Also tested manually in the wild using repositories at try.gogs.io.
That server offers only BASIC auth, so the other paths
(DIGEST, NEGOTIATE, fall back from DIGEST to BASIC) are untested
and I have no way to test them.
* public repository: GET unauthenticated, POST authenticated
Also tested after clearing the credentials and then entering a
wrong password: correctly asks three times during the HTTP
POST for user name and password, then gives up.
* private repository: authentication already on GET; then gets
applied correctly initially to the POST request, which succeeds.
Also fix the authentication to use the credentials for the redirected
URI if redirects had occurred. We must not present the credentials
for the original URI in that case. Consider a malicious redirect A->B:
this would allow server B to harvest the user credentials for server
A. The unit test for authentication after a redirect also tests for
this.
Bug: 513043
Change-Id: I97ee5058569efa1545a6c6f6edfd2b357c40592a
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
git-core follows HTTP redirects so JGit should also provide this.
Implement config setting http.followRedirects with possible values
"false" (= never), "true" (= always), and "initial" (only on GET, but
not on POST).[1]
We must do our own redirect handling and cannot rely on the support
that the underlying real connection may offer. At least the JDK's
HttpURLConnection has two features that get in the way:
* it does not allow cross-protocol redirects and thus fails on
http->https redirects (for instance, on Github).
* it translates a redirect after a POST to a GET unless the system
property "http.strictPostRedirect" is set to true. We don't want
to manipulate that system setting nor require it.
Additionally, git has its own rules about what redirects it accepts;[2]
for instance, it does not allow a redirect that adds query arguments.
We handle response codes 301, 302, 303, and 307 as per RFC 2616.[3]
On POST we do not handle 303, and we follow redirects only if
http.followRedirects == true.
Redirects are followed only a certain number of times. There are two
ways to control that limit:
* by default, the limit is given by the http.maxRedirects system
property that is also used by the JDK. If the system property is
not set, the default is 5. (This is much lower than the JDK default
of 20, but I don't see the value of following so many redirects.)
* this can be overwritten by a http.maxRedirects git config setting.
The JGit http.* git config settings are currently all global; JGit has
no support yet for URI-specific settings "http.<pattern>.name". Adding
support for that is well beyond the scope of this change.
Like git-core, we log every redirect attempt (LOG.info) so that users
may know about the redirection having occurred.
Extends the test framework to configure an AppServer with HTTPS support
so that we can test cloning via HTTPS and redirections involving HTTPS.
[1] https://git-scm.com/docs/git-config
[2] 6628eb41db
[3] https://www.w3.org/Protocols/rfc2616/rfc2616-sec10.html
CQ: 13987
Bug: 465167
Change-Id: I86518cb76842f7d326b51f8715e3bbf8ada89859
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
* Adapt to API removals in jetty 9.4+
* Manifests changed to restrict jetty to [9.4.5,10.0.0)
Bug: 514336
Bug: 516514
Change-Id: Ifcfd968084dfa6db0ae07cf541d33a6cdedc1ee2
Signed-off-by: Mat Booth <mat.booth@redhat.com>
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Update to the latest 9.3 version until we have a solution for bug 514336
we face with 9.4.x versions.
Change-Id: I6d8d476abe8677ce865a08099bb77330effc700a
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
This works around the problems we faced with jetty 9.4.3.v20170317.
Bug: 514336
Change-Id: I7e9dd539414624d71587c55cb436b843949aa296
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
This is required since we now use AbstractLoginService which was
introduced in Jetty 9.4.0.
Change-Id: Iee6e4ae456123099f7a99cc53c5ae02fd43bfa46
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Add bazel build for ui and junit.http, and the test packages.
A number of different test labels are supported:
api
attributes
dfs
diff
http
lfs
lfs-server
nls
notes
pack
patch
pgm
reftree
revplot
revwalk
storage
submodule
symlinks
transport
treewalk
util
To run all tests:
bazel test //...
To run specific tests, using labels:
bazel test --test_tag_filters=api,dfs,revplot,treewalk //...
Change-Id: Ic41b05a79d855212e67b1b4707e9c6b4dc9ea70d
Signed-off-by: David Ostrovsky <david@ostrovsky.org>
Signed-off-by: Jonathan Nieder <jrn@google.com>
MappedLoginService is no longer available in Jetty 9.4 therefore base
TestLoginService on AbstractLoginService.
Apparently Jetty now uses slf4j hence adapt RecordingLogger accordingly
so we can log error messages containing slf4j style formatting anchors
"{}".
Change-Id: Ibb36aba8782882936849b6102001a88b699bb65c
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
(cherry picked from commit 5e8e2179b2)
Since the introduction of generic type parameter inference in Java 7,
it's not necessary to explicitly specify the type of generic parameters.
Enable the warning in Eclipse, and fix all occurrences.
Change-Id: I9158caf1beca5e4980b6240ac401f3868520aad0
Signed-off-by: David Pursehouse <david.pursehouse@gmail.com>
In 0bff481d45 to accurately use the two
limits it was necessary to move the LimitedInputStream out of the
PacketLineIn and further down to the PackParser. Unfortuantely this
didn't survive review, as a buggy test failed and the "fix" was to
drop this part of the code.
The maxPackSizeLimit should apply to the pack stream, not the pkt-line
framing used to send commands to control the ReceivePack instance. The
commands are controlled using a different limit. The failing test allowed
too many bytes in the pack and was only failing because it was including
the command framing. The correct fix for the test was simply to drop the
limit lower, to more closely match the actual pack size.
Change-Id: I47d3885b9d7d527e153df7ac9c62fc2865ceecf4
Set missingOverrideAnnotation=warning in Eclipse compiler preferences
which enables the warning:
The method <method> of type <type> should be tagged with @Override
since it actually overrides a superclass method
Justification for this warning is described in:
http://stackoverflow.com/a/94411/381622
Enabling this causes in excess of 1000 warnings across the entire
code-base. They are very easy to fix automatically with Eclipse's
"Quick Fix" tool.
Fix all of them except 2 which cause compilation failure when the
project is built with mvn; add TODO comments on those for further
investigation.
Change-Id: I5772061041fd361fe93137fd8b0ad356e748a29c
Signed-off-by: David Pursehouse <david.pursehouse@gmail.com>
MappedLoginService is no longer available in Jetty 9.4 therefore base
TestLoginService on AbstractLoginService.
Apparently Jetty now uses slf4j hence adapt RecordingLogger accordingly
so we can log error messages containing slf4j style formatting anchors
"{}".
Change-Id: Ibb36aba8782882936849b6102001a88b699bb65c
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Matthias Sohn
Thomas Wolf
David Pursehouse
Mat Booth
David Ostrovsky
Shawn Pearce
Bo Zhang