The Fetch command line was failing with NPE in case some options were omitted.
Additionally, it was setting a negative timeout when no timeout option was used
which caused HttpURLConnection to throw an IllegalArgumentException.
Change-Id: I2c67e2e1a03044284d183d73f0b82bb7ff79de95
Signed-off-by: Sasa Zivkov <sasa.zivkov@sap.com>
Signed-off-by: Chris Aniszczyk <caniszczyk@gmail.com>
There was one place where the parameter substitution wasn't done which caused
text fragments like "{0}" to appear in JGits output.
Bug: 325025
Change-Id: I89b881a8b5ef39f609437546310463ed4f6e1fb5
Signed-off-by: Sasa Zivkov <sasa.zivkov@sap.com>
Signed-off-by: Chris Aniszczyk <caniszczyk@gmail.com>
By moving the logic that parses a pack stream from the network (or
a bundle) into a type that can be constructed by an ObjectInserter,
repository implementations have a chance to inject their own logic
for storing object data received into the destination repository.
The API isn't completely generic yet, there are still quite a few
assumptions that the PackParser subclass is storing the data onto
the local filesystem as a single file. But its about the simplest
split of IndexPack I can come up with without completely ripping
the code apart.
Change-Id: I5b167c9cc6d7a7c56d0197c62c0fd0036a83ec6c
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Chris Aniszczyk <caniszczyk@gmail.com>
This simple change lets us get rid of WorkDirCheckout from JGit,
and all of its supporting code.
Change-Id: I1a5aabe9ab4a2b156fd37cc7e9ededb4ed70f53a
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Chris Aniszczyk <caniszczyk@gmail.com>
Each time getConfig() is called on FileRepository, it checks the
last modified time of both ~/.gitconfig and $GIT_DIR?config. If
$GIT_DIR/config appears to have been modified, it is read back in
from disk and the current config is wiped out.
When mutating a configuration file, this may cause in-memory edits
to disappear. To avoid that callers need to avoid calling getConfig
until after the configuration has been saved to disk.
Unfortunately the API is still horribly broken. Configuration should
be modified only while a lock is held on the configuration file, very
similar to the way a ref is updated via its locking protocol. But our
existing API is really broken for that so we'll have to defer cleaning
up the edit path for a future change.
Change-Id: I5888dd97bac20ddf60456c81ffc1eb8df04ef410
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
To improve runtime performance, caching the WorkingTreeOptions inside
of the Config object using the Config.SectionParser API allows
the WorkingTreeOptions to be accessed more efficiently whenever a
FileTreeIterator is constructed for the Repository.
Instead of passing the filemode handling option into isModified(),
the WorkingTreeIterator should always honor whatever setting has
been configured in this repository, as defined by its own copy of
the WorkingTreeOptions. This simplifies all of the callers as they
no longer need to lookup core.filemode on their own.
A few locations were changed from always using a hardcoded "true"
on the file mode to passing what is actually configured in the
repository. This is a behavior change, but corrects what should be
considered to be bugs as the core.filemode variable wasn't always
being used.
Change-Id: Idb176736fa0dc97af372f1d652a94ecc72fb457c
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Its confusing that a new TreeWalk() needs to have reset() invoked
on it before addTree(). This is a historical accident caused by
how TreeWalk was abused within ObjectWalk.
Drop the initial empty tree from the TreeWalk and thus remove a
number of pointless reset() operations from unit tests and some of
the internal JGit code.
Existing application code which is still calling reset() will simply
be incurring a few unnecessary field assignments, but they should
consider cleaning up their code in the future.
Change-Id: I434e94ffa43491019e7dff52ca420a4d2245f48b
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
We should grab the repository directory from the command to
avoid an NPE if no git directory is passed in via the CLI.
Change-Id: I649467c6d84bbc0d26a070d0d4ff1e6f81fd5bad
Signed-off-by: Chris Aniszczyk <caniszczyk@gmail.com>
The diff algorithm which is used by Merge, Cherry-Pick, Rebase
should be configurable. A new configuration parameter "diff.algorithm"
is introduced which currently accepts the values "myers" or
"histogram". Based on this parameter for example the ResolveMerger
will choose a diff algorithm. The reason for this is bug 331078.
This bug shows that JGit is more compatible with C Git when
histogram diff is in place. But since histogram diff is quite new we
need an easy way to fall back to Myers diff.
Bug: 331078
Change-Id: I2549c992e478d991c61c9508ad826d1a9e539ae3
Signed-off-by: Christian Halstrick <christian.halstrick@sap.com>
Signed-off-by: Philipp Thun <philipp.thun@sap.com>
The implementation delegates to the CheckoutCommand and
therefore only supports some of the options supported by
the CheckoutCommand.
Signed-off-by: Chris Aniszczyk <caniszczyk@gmail.com>
Since we have the RmCommand API now, update Rm to use it.
Change-Id: I6e2cb37573cc8a29846f01e09e8c07e0dc279dbe
Signed-off-by: Chris Aniszczyk <caniszczyk@gmail.com>
Instead of configuring the JSch session factory, configure a more
generic CredentialsProvider, which will work for other transport
types such as http, in addition to the existing ssh.
Change-Id: I22b13303c17e654ba6720edf4be2ef15fe29537a
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
jgit.sh <command> --help was not working for the commands Diff
and ShowCommands because of missing metaVar information. Missing
information is added here.
Change-Id: I0ab7e35006b6aa7d4326a634309dddfcdb78f2a6
Signed-off-by: Christian Halstrick <christian.halstrick@sap.com>
Implementation delegates all work to the AddCommand class and,
therefore, supports only those options currently supported by the
AddCommand which means: --update and the filepattern... arguments.
Change-Id: I4827d37e08b4c988c2458d9ba60a61b6ad414d10
Signed-off-by: Sasa Zivkov <sasa.zivkov@sap.com>
When --git-dir=X is given JGit creates a bare repository in the
directory X. However, when the --bare option is not explicitly
given, this is not properly reflected in the X/config file i.e.
the bare=true is missing. This change fixes this minor issue.
Signed-off-by: Sasa Zivkov <sasa.zivkov@sap.com>
The diff command in the pgm package was enhanced to allow
choosing the diff algorithm (currently myers or histogram)
Change-Id: I72083e78fb5c92868eb5d8ec512277d212a39349
Signed-off-by: Christian Halstrick <christian.halstrick@sap.com>
3rd party packages that use repository types other than FileRepository
may wish to extend our pgm package and implement their own resolution
scheme for repository "names" that are passed in by the --git-dir
command line option. Make that possible by allowing the package to
extend the Main class and override the lookup.
This is primarily useful when developing new storage implementations
and trying to experiment with the results, without linking all of it
into the core JGit package.
Change-Id: Id30e168da16341e5da43365688a63aa30c7b7e2c
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Command names like MakeCacheTree weren't coming up with hyphens between
every word, so they read "debug-make-cachetree" rather than the
expected "debug-make-cache-tree". On each lowercase character reset
the lastWasDash flag so the next uppercase will insert a hyphen before
the next word.
Change-Id: I539fabb339e60896165619c307dec71e3317b0d8
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
HistogramDiff outperforms it for any case where PatienceDiff needs to
fallback to another algorithm. Consequently it's not worth keeping
around, because we would always want a fallback enabled.
Change-Id: I39b99cb1db4b3be74a764dd3d68cd4c9ecd91481
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
When working on a difference algorithm's implementation, its generally
more important to care about how it behaves on real-world inputs than
it does on fake inputs created for unit test cases. Run each
implementation against a number of real-world repositories, looking at
changes between files in each commit. This gives a better picture of
how a particular algorithm performs.
This test suite run against JGit and linux-2.6 with the current
available algorithms shows HistogramDiff always out-performs
MyersDiff, and by a wide margin on the linux-2.6 sources. As
HistogramDiff has similar output properties as PatienceDiff, the
resulting edits are probably also more human-readable. These test
results show that HistogramDiff is a good choice for the default
implementation, and also show that PatienceDiff isn't worth keeping.
jgit: start at baa83ae
2686 files, 760 commits
N= 3 min lines, 3016 max lines
Algorithm Time(ns) ( Time(ns) on Time(ns) on )
( N=3 N=3016 )
---------------------------------------------------------------------
histogram_myers 314652100 ( 3900 298100 )
histogram 315973000 ( 3800 302100 )
patience 774724900 ( 4500 347900 )
patience_histogram_myers 786332800 ( 3700 351200 )
myers 819359300 ( 4100 379100 )
patience_myers 843416700 ( 3800 348000 )
linux-2.6.git: start at 85a3318
4001 files, 2680 commits
N= 2 min lines, 39098 max lines
Algorithm Time(ns) ( Time(ns) on Time(ns) on )
( N=2 N=39098 )
---------------------------------------------------------------------
histogram_myers 1229870000 ( 5900 2642700 )
histogram 1235654100 ( 6000 2695400 )
patience 3856546000 ( 5900 2627700 )
patience_histogram_myers 3866728100 ( 7000 2624000 )
patience_myers 4004875300 ( 8000 2651700 )
myers 9794679000 ( 7200 2716200 )
Change-Id: I2502684d31f7851e720356820d04d8cf767f7229
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
This is the test suite I was using to help understand why we had
such a high collision rate with RawTextComparator, and to select
a replacement function.
Since its not something we will run very often, lets make it a
program in the debug package rather than a JUnit test. This way
we can run it on demand against any corpus of files we choose,
but we aren't bottlenecking our daily builds running tests with
no assertions.
Adding a new hash function to this suite is simple, just define
a new instance member of type "Hash" with the logic applied to
the region passed in.
Change-Id: Iec0b176adb464cf95b06cda157932b79c0b59886
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Allow our command line commands like Glog, Log to accept the
--all option to walk all known refs.
Change-Id: I6a0c84fc19e7fa80ddaa2315851c58ba89d43ca5
Signed-off-by: Christian Halstrick <christian.halstrick@sap.com>
We used the wrong format method, which lead to this confusing output:
$ ./jgit clone git://...
Initialized empty Git repository in {0}
remote: Counting objects: 201783
...
remote: {0}
We need to use MessageFormat.format() as the message translations
use {0} syntax and not %s syntax for placeholders.
Change-Id: I8bf0fd3f7dbecf9edf47419c46aed0493d405f9e
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Instead of making the sequence itself responsible for the equivalence
function, use an external function that is supplied by the caller.
This cleans up the code because we now say cmp.equals(a, ai, b, bi)
instead of a.equals(ai, b, bi).
This refactoring also removes the odd concept of creating different
types of sequences to have different behaviors for whitespace
ignoring. Instead DiffComparator now supports singleton functions
that apply a particular equivalence algorithm to a type of sequence.
Change-Id: I559f494d81cdc6f06bfb4208f60780c0ae251df9
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
We weren't flushing the commit message before the diff output, which
meant the headers and message showed randomly interleaved with the
diff rather than immediately before.
Change-Id: I6cefab8d40e9d40c937e9deb12911188fec41b26
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Similar to C Git, default our difference when no trees are given
to us to something that makes a tiny bit of sense to the human.
We also now support the --cached flag, and have its meaning work the
same way as C Git.
Change-Id: I2f19dad4e018404e280ea3e95ebd448a4b667f59
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Applications just want a quick way to configure our diff
implementation, and then just want to use it without a lot of fuss.
Move all of the rename detection logic and path following logic
out of our pgm package and into DiffFormatter itself, making it
much easier for a GUI to take advantage of the features without
duplicating a lot of code.
Change-Id: I4b54e987bb6dc804fb270cbc495fe4cae26c7b0e
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Create a new 'org.eclipse.jgit.api.errors' package to contain
exceptions related to using the Git porcelain API.
Change-Id: Iac1781bd74fbd520dffac9d347616c3334994470
Signed-off-by: Chris Aniszczyk <caniszczyk@gmail.com>
This reverts commit db4c516f67 since
it breaks compatibility with Eclipse 3.5 which can no longer import
the projects
Bug: 323390
Change-Id: I3cc91364a6747cfcb4c611a9be5258f81562f726
Updates the project level settings to run the formatter
on save on only on the edited lines.
Change-Id: I26dd69d0c95e6d73f9fdf7031f3c1dbf3becbb79
Signed-off-by: Chris Aniszczyk <caniszczyk@gmail.com>
PersonIdent should be parsable for an invalid commit which
contains multiple authors, like "A <a@a.org>, B <b@b.org>".
PersonIdent(String) constructor now delegates to
RawParseUtils.parsePersonIdent().
Change-Id: Ie9798d36d9ecfcc0094ca795f5a44b003136eaf7
ObjectReader implementations are now responsible for creating the
unique abbreviation of an ObjectId, or for resolving an abbreviation
back to its full form. In this latter case the reader can offer up
multiple candidates to the caller, who may be able to disambiguate
them based on context.
Repository.resolve() doesn't take multiple candidates into account
right now, but it could in the future by looking for a remaining
^0 or ^{commit} suffix and take an expansion if there is only one
commit that matches the input abbreviation. It could also use
the distance from an annotated tag to resolve "tag-NNN-gcommit"
style strings that are often output by `git describe`.
Change-Id: Icd3250adc8177ae05278b858933afdca0cbbdb56
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
These objects should be responsible for their own formatting,
rather than delegating it to some obtuse type called ObjectInserter.
While we are at it, simplify the way we insert these into a database.
Passing in the type and calling format in application code turned
out to be a huge mistake in terms of ease-of-use of the insert API.
Change-Id: Id5bb95ee56aa2a002243e9b7853b84ec8df1d7bf
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Since these types no longer support reading, calling them a Builder
is a better description of what they do. They help the caller to
build a commit or a tag object.
Change-Id: I53cae5a800a66ea1721b0fe5e702599df31da05d
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Sasa Zivkov
Shawn O. Pearce
Matthias Sohn
Chris Aniszczyk
Christian Halstrick
Robin Stocker
Robin Rosenberg
Marc Strapetz