It missed to call the setup() method of its super class which prepares
the MockSystemReader
Change-Id: I39858749f8d0115fc6ac7edc8847ffb2bbc85c33
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
FS#getFileStoreAttributes used the real userConfig and not the mocked
one. This led to test errors when running tests with Bazel since it
sandboxes tests which prevents they can write to ~/.gitconfig.
Fix this by first preparing the MockedSystemReader and the mocked config
before calling FS#getFileStoreAttributes.
Also fix ConfigTest which broke due to this change since it inherits
from LocalDiskRepositoryTestCase and calls its setup method which was
changed here. We can no longer assert by comparing plain text since FS
adds FileStoreAttributes to the mocked userConfig. Also the default
options seen by this test changed since we now use a mocked config.
Change-Id: I76bc7c94953fe979266147d3b309a68dda9d4dfe
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
If we use the default system reader FileStoreAttributes cannot persist
attributes in userConfig when tests run in Bazel due to sandboxing.
Hence we need to ensure that all tests use MockSystemReader (and
especially a mocked userConfig).
Change-Id: Ic1ad8e2ec5a150c5433434a5f6667d6c4674c87d
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
This ensures we don't try to persist MockConfig using its superclasses
save() method which fails with an NPE since MockConfig has no backing
file.
Change-Id: Ifba2d24c9438bb30d3828ed31a4c131f940b45eb
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
We can't add this method to the super class StoredConfig since that
abstracts from filesystem storage. MockSystemReader.MockConfig is a
StoredConfig and is also used by tests for dfs based storage. Hence
remove this leaky abstraction.
This implies we always use the fallback FileStoreAttributes which means
a config file modification is considered racy within the first 2
seconds. This should not be an issue since typically configs change
rarely and re-reading a config within the racy period is relatively
cheap since configs are small.
Change-Id: Ia2615addc24a7cadf3c566ee842c6f4f07e159a5
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
This was enabled unintentionally in 06fc6c7c and spams the test logs. We
can enable this when needed.
Change-Id: I9f3042c0e285ff236be65fcc02bdcfdb90efc3af
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
- use slf4j-simple for logging in test runs
- for log configuration see
https://www.slf4j.org/api/org/slf4j/impl/SimpleLogger.html
Change-Id: I9f0a532644b31162c867cd0d63f083296eaf6be5
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
* stable-5.2:
Fix OpenSshConfigTest#config
FileSnapshot: fix bug with timestamp thresholding
In LockFile#waitForStatChange wait in units of file time resolution
Cache FileStoreAttributeCache per directory
Fix FileSnapshot#save(long) and FileSnapshot#save(Instant)
Persist minimal racy threshold and allow manual configuration
Measure minimum racy interval to auto-configure FileSnapshot
Reuse FileUtils to recursively delete files created by tests
Fix FileAttributeCache.toString()
Add test for racy git detection in FileSnapshot
Repeat RefDirectoryTest.testGetRef_DiscoversModifiedLoose 100 times
Fix org.eclipse.jdt.core.prefs of org.eclipse.jgit.junit
Add missing javadoc in org.eclipse.jgit.junit
Enhance RepeatRule to report number of failures at the end
Fix FileSnapshotTests for filesystem with high timestamp resolution
Retry deleting test files in FileBasedConfigTest
Measure filesystem timestamp resolution already in test setup
Refactor FileSnapshotTest to use NIO APIs
Measure stored timestamp resolution instead of time to touch file
Handle CancellationException in FileStoreAttributeCache
Fix FileSnapshot#saveNoConfig
Use Instant for smudge time in DirCache and DirCacheEntry
Use Instant instead of milliseconds for filesystem timestamp handling
Workaround SecurityException in FS#getFsTimestampResolution
Fix NPE in FS$FileStoreAttributeCache.getFsTimestampResolution
FS: ignore AccessDeniedException when measuring timestamp resolution
Add debug trace for FileSnapshot
Use FileChannel.open to touch file and set mtime to now
Persist filesystem timestamp resolution and allow manual configuration
Increase bazel timeout for long running tests
Bazel: Fix lint warning flagged by buildifier
Update bazlets to latest version
Bazel: Add missing dependencies for ArchiveCommandTest
Bazel: Remove FileTreeIteratorWithTimeControl from BUILD file
Add support for nanoseconds and microseconds for Config#getTimeUnit
Optionally measure filesystem timestamp resolution asynchronously
Delete unused FileTreeIteratorWithTimeControl
FileSnapshot#equals: consider UNKNOWN_SIZE
Timeout measuring file timestamp resolution after 2 seconds
Fix RacyGitTests#testRacyGitDetection
Change RacyGitTests to create a racy git situation in a stable way
Deprecate Constants.CHARACTER_ENCODING in favor of
StandardCharsets.UTF_8
Fix non-deterministic hash of archives created by ArchiveCommand
Update Maven plugins ecj, plexus, error-prone
Update Maven plugins and cleanup Maven warnings
Make inner classes static where possible
Fix API problem filters
Change-Id: I238adfd3080a5fed9d64c3c757297da6ea893918
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
* stable-5.1:
Fix OpenSshConfigTest#config
FileSnapshot: fix bug with timestamp thresholding
In LockFile#waitForStatChange wait in units of file time resolution
Cache FileStoreAttributeCache per directory
Fix FileSnapshot#save(long) and FileSnapshot#save(Instant)
Persist minimal racy threshold and allow manual configuration
Measure minimum racy interval to auto-configure FileSnapshot
Reuse FileUtils to recursively delete files created by tests
Fix FileAttributeCache.toString()
Add test for racy git detection in FileSnapshot
Repeat RefDirectoryTest.testGetRef_DiscoversModifiedLoose 100 times
Fix org.eclipse.jdt.core.prefs of org.eclipse.jgit.junit
Add missing javadoc in org.eclipse.jgit.junit
Enhance RepeatRule to report number of failures at the end
Fix FileSnapshotTests for filesystem with high timestamp resolution
Retry deleting test files in FileBasedConfigTest
Measure filesystem timestamp resolution already in test setup
Refactor FileSnapshotTest to use NIO APIs
Measure stored timestamp resolution instead of time to touch file
Handle CancellationException in FileStoreAttributeCache
Fix FileSnapshot#saveNoConfig
Use Instant for smudge time in DirCache and DirCacheEntry
Use Instant instead of milliseconds for filesystem timestamp handling
Workaround SecurityException in FS#getFsTimestampResolution
Fix NPE in FS$FileStoreAttributeCache.getFsTimestampResolution
FS: ignore AccessDeniedException when measuring timestamp resolution
Add debug trace for FileSnapshot
Use FileChannel.open to touch file and set mtime to now
Persist filesystem timestamp resolution and allow manual configuration
Increase bazel timeout for long running tests
Bazel: Fix lint warning flagged by buildifier
Update bazlets to latest version
Bazel: Add missing dependencies for ArchiveCommandTest
Bazel: Remove FileTreeIteratorWithTimeControl from BUILD file
Add support for nanoseconds and microseconds for Config#getTimeUnit
Optionally measure filesystem timestamp resolution asynchronously
Delete unused FileTreeIteratorWithTimeControl
FileSnapshot#equals: consider UNKNOWN_SIZE
Timeout measuring file timestamp resolution after 2 seconds
Fix RacyGitTests#testRacyGitDetection
Change RacyGitTests to create a racy git situation in a stable way
Deprecate Constants.CHARACTER_ENCODING in favor of StandardCharsets.UTF_8
Fix non-deterministic hash of archives created by ArchiveCommand
Update Maven plugins ecj, plexus, error-prone
Update Maven plugins and cleanup Maven warnings
Make inner classes static where possible
Fix API problem filters
Change-Id: Ia57385b2a60f48a5317c8d723721c235d7043a84
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
- use FS.DETECTED instead of db.getFS() since the ssh config is
typically in a different place than the repository, the same is used in
OpenSshConfig
- reduce unnecessary repeated writes by introducing wait for one tick of
the file time resolution
Change-Id: Ifac915e97ff420ec5cf8e2f162e351f9f51b6b14
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Increase the safety factor to 2.5x for extra safety if max of measured
timestamp resolution and measured minimal racy threshold is < 100ms, use
1.25 otherwise since for large filesystem resolution values the
influence of finite resolution of the system clock should be negligible.
Before, not yet using the newly introduced minRacyThreshold measurement,
the threshold was 1.1x FS resolution, and we could issue the
following sequence of events,
start
create-file
read-file (currentTime)
end
which had the following timestamps:
create-file 1564589081998
start 1564589082002
read 1564589082003
end 1564589082004
In this case, the difference between create-file and read is 5ms,
which exceeded the 4ms FS resolution, even though the events together
took just 2ms of runtime.
Reproduce with:
bazel test --runs_per_test=100 \
//org.eclipse.jgit.test:org_eclipse_jgit_internal_storage_file_FileSnapshotTest
The file system timestamp resolution is 4ms in this case.
This code assumes that the kernel and the JVM use the same clock that
is synchronized with the file system clock. This seems plausible,
given the resolution of System.currentTimeMillis() and the latency for
a gettimeofday system call (typically ~1us), but it would be good to
justify this with specifications.
Also cover a source of flakiness: if the test runs under extreme load,
then we could have
start
create-file
<long delay>
read
end
which would register as an unmodified file. Avoid this by skipping the
test if end-start is too big.
[msohn]:
- downported from master to stable-5.1
- skip test if resolution is below 10ms
- adjust safety factor to 1.25 for resolutions above 100ms
Change-Id: I87d2cf035e01c44b7ba8364c410a860aa8e312ef
Signed-off-by: Han-Wen Nienhuys <hanwen@google.com>
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Since we now measure file time resolution we can use it to replace the
hard coded wait time of 25ms. FileSnapshot#equals will return true until
the mtime of the old (o) and the new FileSnapshot (n) differ by at least
one file time resolution.
Change-Id: Icb713a80ce9eb929242ed083406bfb6650c72223
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Cache FileStoreAttributeCache entries since looking up FileStore for a
file may be expensive on some platforms.
Implement a simple LRU cache based on ConcurrentHashMap using a simple
long counter to order access to cache entries.
Change-Id: I4881fa938ad2f17712c05da857838073a2fc4ddb
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Signed-off-by: Marc Strapetz <marc.strapetz@syntevo.com>
Also-By: Marc Strapetz <marc.strapetz@syntevo.com>
Use the fallback timestamp resolution as already described in the
javadoc of these methods. Using zero file timestamp resolution doesn't
make sense.
Change-Id: Iaad2a0f99c3be3678e94980a0a368181b6aed38c
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
To enable persisting the minimal racy threshold per FileStore add a
new config option to the user global git configuration:
- Config section is "filesystem"
- Config subsection is concatenation of
- Java vendor (system property "java.vendor")
- Java version (system property "java.version")
- FileStore's name, on Windows we use the attribute volume:vsn instead
since the name is not necessarily unique.
- separated by '|'
e.g.
"AdoptOpenJDK|1.8.0_212-b03|/dev/disk1s1"
The same prefix is used as for filesystem timestamp resolution, so
both values are stored in the same config section
- The config key for minmal racy threshold is "minRacyThreshold" as a
time value, supported time units are those supported by
DefaultTypedConfigGetter#getTimeUnit
- measure for 3 seconds to limit runtime which depends on hardware, OS
and Java version being used
If the minimal racy threshold is configured for a given FileStore the
configured value is used instead of measuring it.
When the minimal racy threshold was measured it is persisted in the user
global git configuration.
Rename FileStoreAttributeCache to FileStoreAttributes since this class
is now declared public in order to enable exposing all attributes in one
object.
Example:
[filesystem "AdoptOpenJDK|11.0.3|/dev/disk1s1"]
timestampResolution = 7000 nanoseconds
minRacyThreshold = 3440 microseconds
Change-Id: I22195e488453aae8d011b0a8e3276fe3d99deaea
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Also-By: Marc Strapetz <marc.strapetz@syntevo.com>
By running FileSnapshotTest#detectFileModified we found that the sum of
measured filesystem timestamp resolution and measured clock resolution
may yield a too small interval after a file has been modified which we
need to consider racily clean. In our tests we didn't find this behavior
on all systems we tested on, e.g. on MacOS using APFS and Java 8 and 11
this effect was not observed.
On Linux (SLES 15, kernel 4.12.14-150.22-default) we collected the
following test results using Java 8 and 11:
In 23-98% of 10000 test runs (depending on filesystem type and Java
version) the test failed, which means the effective interval which needs
to be considered racily clean after a file was modified is larger than
the measured file timestamp resolution.
"delta" is the observed interval after a file has been modified but
FileSnapshot did not yet detect the modification:
"resolution" is the measured sum of file timestamp resolution and clock
resolution seen in Java.
Java version filesystem failures resolution min delta max delta
1.8.0_212-b04 btrfs 98.6% 1 ms 3.6 ms 6.6 ms
1.8.0_212-b04 ext4 82.6% 3 ms 1.1 ms 4.1 ms
1.8.0_212-b04 xfs 23.8% 4 ms 3.7 ms 3.9 ms
1.8.0_212-b04 zfs 23.1% 3 ms 4.8 ms 5.0 ms
11.0.3+7 btrfs 98.1% 3 us 0.7 ms 4.7 ms
11.0.3+7 ext4 98.1% 6 us 0.7 ms 4.7 ms
11.0.3+7 xfs 98.5% 7 us 0.1 ms 8.0 ms
11.0.3+7 zfs 98.4% 7 us 0.7 ms 5.2 ms
Mac OS
1.8.0_212 APFS 0% 1 s
11.0.3+7 APFS 0% 6 us
The observed delta is not distributed according to a normal gaussian
distribution but rather random in the observed range between "min delta"
and "max delta".
Run this test after measuring file timestamp resolution in
FS.FileAttributeCache to auto-configure JGit since it's unclear what
mechanism is causing this effect.
In FileSnapshot#isRacyClean use the maximum of the measured timestamp
resolution and the measured "delta" as explained above to decide if a
given FileSnapshot is to be considered racily clean. Add a 30% safety
margin to ensure we are on the safe side.
Change-Id: I1c8bb59f6486f174b7bbdc63072777ddbe06694d
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Replace redundant complex implementation of recursive delete by the one
in FileUtils.
Change-Id: Iced1468b96c4f32381a9cf0c651b2bf6a9a9af35
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
We should not list the complete cache but only show the cache entry at
hand.
Change-Id: I22be2a4dcbf0145155e23f2389bfcf5662cf23a6
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Repeat the test 10000 times to get statistics if measured
fsTimestampResolution is working in practice to detect racy git
situations.
Add a class to compute statistics for this test. Log delta between
lastModified and time when FileSnapshot failed to detect modification.
This happens if the racy git limit determined by measuring filesystem
timestamp resolution and clock resolution is too small. If it would be
correct FileSnapshot would always detect modification or mark it
modified if time since modification is smaller than the racy git limit.
Change-Id: Iabe7af1a7211ca58480f8902d4fa4e366932fc77
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
This should help to detect if measured fsTimeResolution is too small.
Change-Id: Id1f54dbdedb52b17859904e47776fa3a5887b8be
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Use the same JDT core settings as used in org.eclipse.jgit but ignore
non-externalized strings.
Change-Id: If30013c76a197e571601a8abc882ac6a99592374
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
In order to enable counting how frequently a test fails if repeated add
option abortOnFailure. If it is true the test aborts on the first
failure. Otherwise it runs the configured number of repetitions and, if
there was any failure, throws a RepeatException reporting how many of
the test repetitions failed.
Change-Id: Ic47de44d4a6273fddf04b9993ad989903efb40c3
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
When filesystem timestamp resolution is very high some tests don't work
since runtime of the test setup is too long to reach a racily clean
FileSnapshot. Hence skip these tests when timestamp resolution is higher
than 10 millisecond.
Change-Id: Ie47dd10eda22037b5c1ebff6b6becce0654ea807
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
This helps to avoid some time critical tests can't prepare the test
fixture intended since measuring timestamp resolution takes time.
Change-Id: Ib34023e682a106070ca97e98ef16789a4dfb97b4
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
- use Path instead of File
- create test directories, files and output stream using Files methods
- delete unused list "files"
Change-Id: I8c5c601eca9f613efb5618d33b262277df92a06a
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Measure granularity of timestamps stored in the filesystem by setting
and then getting lastModified timestamp until the read value changed.
Increase increment exponentially to limit number of iterations starting
with 1 microsecond since Java's FileTime (up to Java 12) truncates
timestamps to 1 microsecond resolution. The chosen algorithm yields 2000
steps between 1 ms and 2.5 s.
Also measure clock resolution and add that for the total timestamp
resolution. This avoids systematic measurement errors introduced by
doing IO to touch a file.
Change-Id: I9b37138619422452373e298d9d8c7cb2c384db3f
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
We should not use configuration when creating FileSnapshot when
accessing FileBasedConfig.
Change-Id: Ic521632870f18bb004751642b9d30648dd94049a
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
This enables higher file timestamp resolution on filesystems like ext4,
Mac APFS (1ns) or NTFS (100ns) providing high timestamp resolution on
filesystem level.
Note:
- on some OSes Java 8,9 truncate milliseconds, see
https://bugs.openjdk.java.net/browse/JDK-8177809, fixed in Java 10
- UnixFileAttributes truncates timestamp resolution to microseconds when
converting the internal representation to FileTime exposed in the API,
see https://bugs.openjdk.java.net/browse/JDK-8181493
- WindowsFileAttributes also provides only microsecond resolution
Change-Id: I25ffff31a3c6f725fc345d4ddc2f26da3b88f6f2
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
On Android FS#getFsTimestampResolution always throws a
SecurityException, handle this by falling back to the fallback timestamp
resolution.
Bug: 548947
Change-Id: I0ee6cb3c20e189bdc8d488434a930427ad6f2df2
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
It seems on cygwin creating a file under a writable directory can fail
with AccessDeniedException. Log a warning in this case and fallback to
worst case timestamp resolution of 2 seconds.
Bug: 548648
Change-Id: Ic50c31ce9dc9ccadd4db5247df929418ac62d45c
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Checking lastModified is time critical hence debug trace is the only way
to analyze issues since debugging is impractical.
Also add configuration for buffering of log4j output to reduce runtime
impact when debug trace is on. Limit buffer to 1MiB and comment this
configuration out since we may not always want to use buffering.
Change-Id: Ib1a0537b67c8dc3fac994a77b42badd974ce6c97
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Use options
- StandardOpenOption.CREATE to create touched file if not existing
- StandardOpenOption.SYNC to enforce synch of data and meta data changes
- StandardOpenOption.WRITE
Also set mtime explicitly in FileUtils#touch to the current system time.
This should fix that the previous implementation didn't work on
- locally cached Windows network share (CSC-CACHE filesystem) mapped as
a drive
- nfsv4 mounts on Linux
and that it didn't create unborn file like Linux command "touch".
Apache common's and Guava's touch() use the same approach.
Immediately after creating the probe file used to measure timestamp
resolution touch it. This ensures we always use the local system clock
when measuring filesystem timestamp resolution. This should prevent that
clock skew could influence the measured timestamp resolution in case of
a mounted network filesystem.
Bug: 548598
Change-Id: Iaeaf5967963f582395a195aa637b8188bfadac60
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
To enable persisting filesystem timestamp resolution per FileStore add a
new config section to the user global git configuration:
- Config section is "filesystem"
- Config subsection is concatenation of
- Java vendor (system property "java.vm.vendor")
- runtime version (system property "java.vm.version")
- FileStore's name
- separated by '|'
e.g.
"AdoptOpenJDK|1.8.0_212-b03|/dev/disk1s1"
The prefix is needed since some Java versions do not expose the full
timestamp resolution of the underlying filesystem. This may also
depend on the underlying operating system hence concrete key values
may not be portable.
- Config key for timestamp resolution is "timestampResolution" as a time
value, supported time units are those supported by
DefaultTypedConfigGetter#getTimeUnit
If timestamp resolution is already configured for a given FileStore
the configured value is used instead of measuring the resolution.
When timestamp resolution was measured it is persisted in the user
global git configuration.
Example:
[filesystem "AdoptOpenJDK|1.8.0_212-b03|/dev/disk1s1"]
timestampResolution = 1 seconds
If locking the git config file fails retry saving the resolution up to 5
times in order to workaround races with another thread.
In order to avoid stack overflow use the fallback filesystem timestamp
resolution when loading FileBasedConfig which creates itself a
FileSnapshot to help checking if the config changed.
Note:
- on some OSes Java 8,9 truncate to milliseconds or seconds, see
https://bugs.openjdk.java.net/browse/JDK-8177809, fixed in Java 10
- UnixFileAttributes up to Java 12 truncates timestamp resolution to
microseconds when converting the internal representation to FileTime
exposed in the API, see https://bugs.openjdk.java.net/browse/JDK-8181493
- WindowsFileAttributes also provides only microsecond resolution up to
Java 12
Hence do not attempt to manually configure a higher timestamp resolution
than supported by the Java version being used at runtime.
Bug: 546891
Bug: 548188
Change-Id: Iff91b8f9e6e5e2295e1463f87c8e95edf4abbcf8
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
EolRepositoryTest and GcCommitSelectionTest timed out frequently when
running unit tests using bazel with the default timeout "moderate"
(300s). Increase timeout of these tests to "long" (900s).
Change-Id: I43588cf950f55b50f868d9fe9c66d22bd428a54c
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
This change is fixing confusing name warning: [1].
./org.eclipse.jgit.test/tests.bzl:12: confusing-name:
Never use 'l', 'I', or 'O' as names (they're too easily confused
with 'I', 'l', or '0').
And is also fixing: "All calls to rules or macros should pass arguments
by keyword position argument" warning: [2].
./org.eclipse.jgit.test/BUILD:42: positional-args: All calls to rules
or macros should pass arguments by keyword (arg_name=value) syntax.
[1] https://github.com/bazelbuild/buildtools/blob/master/WARNINGS.md#confusing-name
[2] https://github.com/bazelbuild/buildtools/blob/master/WARNINGS.md#positional-args
Change-Id: If5c28ec8a1ddc1d1b1035bd07b838a2a564aea4f
Signed-off-by: David Ostrovsky <david@ostrovsky.org>
This is needed to make build tool chain compatible with the latest
Bazel releases.
Change-Id: I9822b5fe5f934457e6069217d687b3cf4764b7b7
Signed-off-by: David Ostrovsky <david@ostrovsky.org>
Dependencies on commons-compress, xz, and jgit-archive are required
for the build to succeed.
Change-Id: I42f3721078a240ad93b8dcab909e66b9bfff0b56
Signed-off-by: David Pursehouse <david.pursehouse@gmail.com>
FileTreeIteratorWithTimeControl was deleted in a024759, but was
not removed from the BUILD file, thus causing the bazel build to
fail.
Change-Id: I892c0ffcac947298d0d6009374ee2c5d9afefb66
Signed-off-by: David Pursehouse <david.pursehouse@gmail.com>
Matthias Sohn
David Pursehouse
Han-Wen Nienhuys
David Ostrovsky