Using the lane position and other data for equals/hashCode is not
useful.
Change-Id: I7af151d8a84544a77a486474c8ac71dd80090c66
Signed-off-by: Konrad Kügler <swamblumat-eclipsebugs@yahoo.de>
When blaming a merge commit with "Ignore whitespace changes" enabled,
don't discard blame candidates for other parents when we encounter a
parent that only has whitespace changes compared to the merge result.
The algorithm early prepares parents for blaming, removing the
appropriate blame regions from the list of regions still to blame. Only
at the end, the prepared blame candidates are submitted for blaming.
When looking at a non-first parent which only differs in whitespace to
the merge result, it submitted that parent, but only to blame it for the
(usually few) lines not already prepared to blame on other parents. Due
to an early return the blame candidates for the previous parents were
forgotten, leaving many lines unannotated.
bug: 433024
Change-Id: I43c9caf2078b92b05e652dbed2192568907bf199
Signed-off-by: Konrad Kügler <swamblumat-eclipsebugs@yahoo.de>
When JGit uses bitmaps (which is the case after a gc), the push command
doesn't go through the code where MissingObjectExceptions are caught
for remote objects not found locally.
Fixed by removing earlier non-locally-found remote objects.
This was seen withing gerrit, see:
https://code.google.com/p/gerrit/issues/detail?id=2025
Bug: 426044
Change-Id: Ieda718a0530e3680036edfa0963ab88fdd1362c0
Signed-off-by: Jean-Jacques Lafay <jeanjacques.lafay@gmail.com>
Signed-off-by: Doug Kelly <dougk.ff7@gmail.com>
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
If remote name contains / or there was a branch directly under the
refs/remotes namespace (wrong) the computation of remote name and
suggested local branch name would fail. Fix this by looking at the
configured remotes. A ref under refs/remotes that does not match a
remote configuration is not considered a remote tracking branch anymore.
This patch does not fix all similar errors in EGit/JGit.
Bug: 411002
Bug: 400414
Change-Id: I2515a6ed05f9104c387ce4e43b24dae942ae2473
Instead of requiring the caller to know how to list remote
names or parse remote branch names, add a few utilities for
that.
Change-Id: Ib6b2403532f4abbce594a03c0b9da49d30b19f70
Signed-off-by: Robin Rosenberg <robin.rosenberg@dewire.com>
JGit caches the contents of the known_hosts file within JSch when
first started, and never attempts to re-read it. If the contents
change (such as when using Gerrit replication), the new host will
never be found.
On failures, try reloading the knonwn_hosts and retry the
connection, in addition to reloading the credentials.
Change-Id: I980c4f4003f2a48c71b9b47c51e640d1e7742f58
Signed-off-by: Doug Kelly <dougk.ff7@gmail.com>
Streaming packed deltas is so slow that it never feasibly completes
(it will take hours for it to stream a few hundred megabytes on
relatively fast systems with a large amount of storage). This
was indicated as a "failed experiment" by Shawn in the following
mailing list post:
http://dev.eclipse.org/mhonarc/lists/jgit-dev/msg01674.html
Change-Id: Idc12f59e37b122f13856d7b533a5af9d8867a8a5
Signed-off-by: Doug Kelly <dougk.ff7@gmail.com>
Currently the repo sub-command only "works", but the submodules will have .git
directories themselves, and lacks group support.
Change-Id: I88a6ee07109187c6c9bfd92a044775fcfb5befa6
Signed-off-by: Yuxuan 'fishy' Wang <fishywang@google.com>
Skipping directly to the parent is already possible with an existing
helper method. Update the source path (to follow the rename) and then
use the existing code path to push the parent inside the current entry.
Change-Id: Icb1d49e53d14b599efc478990613625a9e058e09
Pass in the RevWalk and let the candidate decide how to prepare itself
for output. This removes the conditional for the missing sourceCommit,
as candidates missing a commit can override the method with a no-op.
Change-Id: I3fa19b8676dfd3c177583f8f42593b5000b5350d
Instead of updating the candidate's regionList field to iterate
through the linked list of regions, use a special purpose field
in the BlameGenerator. This allows the candidate to be unmodified.
Change-Id: I2cda031b59220ab603ef82050e741ecbbaa1953f
The computeRange method is inefficient for computing the entire file.
If the entire file was selected ask for the entire file.
Change-Id: I8b2dbf635e875cc125443dac50be121208646540
If the caller uses a BatchRefUpdate to execute these (e.g. fetch)
there may be more detailed status information inside of the command
that was used to execute it. Allow the caller to obtain that status
data from the ReceiveCommand version of the TrackingRefUpdate.
Change-Id: I47209377fb8fcef0346d7678f1ab27f4790b49bc
If the header and trailer are identical up to a single line on both
sides, return that REPLACE edit as the only result. No algorithm can
break down a REPLACE with height of 1.
Change-Id: I483c40e8790cc3e8b322ef6dfce2299491fd0ac7
With this commit running blame on render_view_impl.cc[1] saves
about 644 ms over prior versions, reducing the time about 4.5%.
Large projects often contain strands of commits where no changes
are made to a particular subtree. Blame used to dive recursively
into these subtrees to look for the blob and check if its SHA-1
was changed. In chromium/src[1] only 20% of the commits modify
the content/renderer subtree relevant for the file.
The recursivePath is necessary to check for '/' and remember
if common subtree elimination should be attempted. When a file
lives within a subtree the extra cost to check for unmodified
subtrees saves time. However for files in the root tree the
extra work incurred by TreeWalk is not worthwhile and would
significantly increase overall running time.
Now typical running times from an otherwise idle desktop:
real 0m13.387s 0m13.341s 0m13.443s
user 0m15.410s 0m15.220s 0m15.350s
previously:
real 0m14.085s 0m14.049s 0m13.968s
user 0m15.730s 0m15.820s 0m15.770s
[1] 34d6e5c5b4/content/renderer/render_view_impl.cc
Change-Id: Ib16d684df7ffa034ee28def3fb22c797998d5b7b
Avoid converting the raw mode to FileMode. This is an expensive
if-else-if sort of test to just check if the thing is a blob.
Instead test the bit mask directly, which is at least a few
instructions shorter.
The TreeWalk is already recursive and will auto-dive into any
subtrees found. isSubtree check is unnecessary, as is the loop,
as only one result will ever be returned by next().
Change-Id: I9fb25229ebed857469427bfbdf74aedebfddfac8
Ensure commit object names are unique by extending the default
abbreviation as long as necessary. This allows `jgit blame` to
more closely match the formatted output of `git blame` on large
histories like Gerrit Code Review's ReceiveCommits.java file.
Change-Id: I5f7c4855769ee9dcba973389df9e109005dcdb5b
Problem:
The BlameGenerator used the RevFlag SEEN to mark commits it had
already looked at (but not necessarily processed), to prevent
processing a commit multiple times. If a commit is a conflicting
merge that contains lines of the merge base, that have been deleted
in its first parent, either these lines or the lines untouched
since the merge base would not be blamed properly.
This happens for example if a file is modified on a main branch in an
earlier commit M and on a side branch in a later commit S. For this
example, M deletes some lines relative to the common base commit B,
and S modifies a subset of these lines, leaving some other of these
lines untouched.
Then side is merged into main, creating a conflict for these
lines. The merge resolution shall carry over some unmodified lines
from B that would otherwise be deleted by M. The route to blame
these lines is via S to B. They can't be blamed via M, as they
don't exist there anymore.
Q
|\
| \
| S
| |
M |
| /
|/
B
Blaming the merged file first blames via S, because that is the
most recent commit. Doing so, it also looks at B to blame the
unmodified lines of B carried over by S into the merge result. In the
course of this, B is submitted for later processing and marked SEEN.
Later M is blamed. It notices that its parent commit B has been
SEEN and aborts processing for M. B is blamed after that, but only
for the lines that survived via S.
As a result, only the lines contributed by S or by B via S are
blamed. All the other lines that were unchanges by both M and S,
which should have been blamed to B via M, are not blamed.
Solution:
Don't abort processing when encountering a SEEN commit. Rather add the
new region list of lines to be blamed to those of the already SEEN and
enqueued commit's region list. This way when the B commit of the
above example is processed, it will blame both the lines of M and S,
yielding a complete blame result.
Bug: 374382
Change-Id: I369059597608022948009ea7708cc8190f05a8d3
Signed-off-by: Konrad Kügler <swamblumat-eclipsebugs@yahoo.de>
Signed-off-by: Shawn Pearce <spearce@spearce.org>
This should make it possible for the gitiles plugin to register its
archive formats after gerrit has already registered them.
Signed-off-by: Jonathan Nieder <jrn@google.com>
Change-Id: Icb80a446e583961a7278b707d572d6fe456c372c
Some commands are started without showing a dialog allowing to enter
credentials if needed. Hence we need to tolerate one failing HTTP
authentication to trigger loading credentials from the secure store.
Hence we should not immediately reset the stored credentials if the
first attempt to authenticate fails.
Bug: 431209
Change-Id: I1b9fa34c3d70be226bb1c59c9ebe995998d29bc8
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
When safeForMacOS is enabled the checker verifies a name does not
match against another name in the same tree after normalization to
NFC. The check was incorrect and failed when the first name was put
in, rejecting simple trees containing only one file like "F".
Add a test for this simple tree to verify it is accepted.
Fix the test for NFC normalization to actually normalize
and have a collision.
Change-Id: I39e7d71150948872bff6cd2b06bf8dae52aa3c33
"Invalid tree aa6f10291050a00de83b4630783030b9e3b969ec:duplicate entry names"
is hard to read. A space after the object name and before the message
makes the message more readable.
Change-Id: I96406100dbef8e4bc8fe2047d102681194dc8847
When working on a non-bare repository with a detached HEAD jgit's GC was
packing the ref named "HEAD" into the packed-refs file and deleted the
loose ref (the file .git/HEAD!). This made the repo unusable for native
git. This is fixed by telling jgit to only pack refs starting from
"refs/"
Change-Id: I50018aa006f18b244d2cae2ff78b5ffe1b821d63
Previously, calling addAnnotatedTags() did not modify any state when
there were no annotated tags in the repository. This caused the code
to assume no addFoo() methods had been called, and fell back to the
default of adding refs/*. Instead, use null to indicate neither
addRefs() nor addAnnotatedTags() was called.
Add a test for this behavior.
Change-Id: I9926e5ac17e1a983cd399798993031c72bd79c2c
Under certain circumstances isMergedInto() returned
false even though base is reachable from the tip.
This will hinder pushes and receives by falsely
detecting "non fast forward" merges.
o---o---o---o---o
/ \
/ o---o---A---o---M
/ /
---2---1-
if M (tip) was compared to 1 (base), the method
isMergedInto() could still return false, since
two mergeBases will be detected and the return
statement will only look at one of them:
return next() == base;
In most cases this would pass, but if "A" is
a commit with an old timestamp, the Generator
would walk down to "2" before completing the
walk pass "A" and first finding the other
merge base "1". In this case, the first call to
next() returns 2, which compared to base evaluates
as false.
This is fixed by iterating merge bases and
returning true if base is found among them.
Change-Id: If2ee1f4270f5ea4bee73ecb0e9c933f8234818da
Signed-off-by: Gustaf Lundh <gustaf.lundh@sonymobile.com>
Signed-off-by: Sven Selberg <sven.selberg@sonymobile.com>
If the user provided wrong credentials or credentials changed we
shouldn't give up immediately but retry to get valid credentials from
the credentials provider. Reset the credentials provider if
authentication failed to avoid it reuses wrong credentials in
case it stored them in a persistent store.
Bug: 338048
Bug: 342592
Bug: 427735
Change-Id: Ibd62ef3da17be6454991c43f524c8bbc7ca3c37e
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
JGit wants to control retries during ssh authentication. But JSch by
default already retries 6 times. Hence disable retries in JSch. Without
this the credentials provider isn't reset if e.g. wrong credentials are
specified.
Bug: 430210
Change-Id: I6fa726a14a84b06411e7010608c7a1e2bfb8bfe8
When more than one lane is drawn, some commits are vertically misaligned
(off by two pixels). This change fixes the alignment.
Bug: 426047
Change-Id: Icbe7ce9f5a6b281b2aaab66e4d76dfc1010b2fb5
Signed-off-by: Konrad Kügler <swamblumat-eclipsebugs@yahoo.de>
Signed-off-by: Rüdiger Herrmann <ruediger.herrmann@gmx.de>
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Copying flags through a graph with deep side branches can cause
StackOverflowError. The recursive step to visit the 2nd parent of
a merge commit can overflow the stack if these are themselves very
deep histories with many branches.
Rewrite the loop to iterate up to 500 recursive steps deep before
unwinding the stack and running the remaining parts of the graph
using a dynamically allocated FIFORevQueue.
This approach still allows simple graphs that mostly merge short
lived topic branches into master to copy flags with no dynamic
memory allocation, relying only on temporary stack extensions.
Larger more complex graphs only pay the allocation penalities
if copying has to extend outwards "very far" in the graph, which
is unlikely for many coloring based algorithms.
Change-Id: I1882e6832c916e27dd5f6b7602d9caf66fb39c84
Verifying 100 new objects are fully connected to the existing DAG
is usually very cheap. Checking the entire Linux kernel history is
fully connected when pushing it to a new repository can take 30-60
seconds. Display a progress counter during this time so the client
knows the server is still working.
Change-Id: Iababe3ee1d35cb82f2bef2f12da7a2ecd03282b0
Matthias Sohn
Konrad Kügler
Jean-Jacques Lafay
Robin Rosenberg
Bogdan Gheorghe
Yuxuan 'fishy' Wang
Doug Kelly
Shawn Pearce
Jonathan Nieder
Stefan Lay
Christian Halstrick
Dave Borowitz
Gustaf Lundh
Rüdiger Herrmann