Store these in the bootstrap layer where they are using $GIT_DIR
as the storage directory for any reference that does not contain '/'.
Change-Id: I5595bf514e4475b7c7e799c2c79446597a3abb4a
By showing the bootstrap layer in getAdditionalRefs() garbage
collector code can be more RefDatabase agnostic and not care about
the special case of RefTree and RefTreeNames for the purposes of
building up the roots to GC. Instead they can combine getRefs(ALL)
and getAdditionalRefs() and have a clean set of roots.
Change-Id: I665cd2456e9316640215b6a08bc728d1356f36d8
Require callers to pass in valid sets for both want and have
collections. Offer PackWriter.NONE as a handy constant for an
empty collection for the have part of preparePack instead of null.
Change-Id: Ifda4450f5e488cbfefd728382b7d30797e229217
The RefTree graph needs to be quickly accessed to read references.
It is also distinct graph disconnected from the rest of the
repository. Store the commit and tree objects in their own pack.
Change-Id: Icbb735be8fa91ccbf0708ca3a219b364e11a6b83
git-core just rerolled the extensible backends series with refsStorage
as the configuration key. Update JGit to match git-core.
Change-Id: If345a2403a996e358b29cfa2a2298f6e8d59d96b
Using ^{} as the peel suffix has caused problems when projects used
tags like v2.1 and then v2.1.1, v2.2.2, etc. The peeled value for
v2.1 was stored very far away in the tree relative to v2.1 itself as
^ sorts in the ASCII/UTF-8 encoding after all other common tag
characters like digits and dots.
Use " ^" instead as space is not valid in a reference name, sorts
before all other valid reference characters (thus forcing next entry
locality) and this looks like a peeled marker for the prior tag.
Change-Id: I26d2247a0428dfe26a9c319c02159502b3a67455
This experimental code can be enabled in $GIT_DIR/config:
[core]
repositoryformatversion = 1
[extensions]
refsBackendType = RefTree
When these are set the repository will read references from the
RefTree rooted by the $GIT_DIR/refs/txn/committed reference.
Update debug-rebuild-ref-tree to rebuild refs/txn/committed only from
the bootstrap layer. This avoids misuse by rebuilding using packed-refs
and $GIT_DIR/refs tree.
Change-Id: Icf600e4a36b2f7867822a7ab1f1617d73c710a4b
Instead of storing references in the local filesystem rely on the
RefTree rooted at refs/txn/committed. This avoids needing to store
references in the packed-refs file by keeping all data rooted under
a single refs/txn/committed ref.
Performance to scan all references from a well packed RefTree is very
close to reading the packed-refs file from local disk.
Storing a packed RefTree is smaller due to pack file compression,
about 49.39 bytes/ref (on average) compared to packed-refs using
~65.49 bytes/ref.
Change-Id: I75caa631162dc127a780095066195cbacc746d49
With this support we no longer need the 'utf-8' alias. UTF-8 will be
automatically tried when the encoding header is not recognized and used
if the character sequence cleanly decodes as UTF-8.
Modernize some of the references to use StandardCharsets.
Change-Id: I4c0c88750475560e1f2263180c4a98eb8febeca0
These types were deprecated in 0.9.1 (aka 384a19eee0).
If anyone is still using them, its time to stop.
Change-Id: I3f73347ba78c639e0c6a504812bc1a0702f829b1
Consolidate copies of this function into one location.
Add some unit tests to prevent bugs that were accidentally
introduced while trying to make this refactoring.
Change-Id: I82f64bbb8601ca2d8316ca57ae8119df32bb5c08
A group of updates can be applied by updating the tree in one step,
writing out a new root tree, and storing its SHA-1. If references
are stored in RefTrees, comparing two repositories is a matter of
checking if two SHA-1s are identical. Without RefTrees comparing two
repositories requires listing all references and comparing the sets.
Track the "refs/" directory as a root tree by storing references
that point directly at an object as a GITLINK entry in the tree.
For example "refs/heads/master" is written as "heads/master".
Annotated tags also store their peeled value with ^{} suffix, using
"tags/v1.0" and "tags/v1.0^{}" GITLINK entries.
Symbolic references are written as SYMLINK entries with the blob of
the symlink carrying the name of the symbolic reference target.
HEAD is outside of "refs/" namespace so it is stored as a special
"..HEAD" entry. This name is chosen because ".." is not valid in
a reference name and it almost looks like "../HEAD" which names
HEAD if the reader was inside of the "refs/" directory.
A new Command type is required to handle symbolic references and
peeled references.
Change-Id: Id47e5d4d32149a9e500854147edd7d93c1041a39
Trailing whitespace is usually removed in properties files so
JGitText did not supply a space between : and the remote message.
Ensure the space exists at runtime by reading the localized string
and appending a space if it is missing.
Messages should be dynamically fetched and not held in a static
class variable, as they can be changed using thread locals.
Change-Id: If6a3707d64094253b1a5304fbfafcf195db7497a
Today there are plenty of modern build tool systems available in the
wild (in no particular order):
* http://bazel.io
* https://pantsbuild.github.io
* http://shakebuild.com
* https://ninja-build.org
* https://buckbuild.com
The attributes, that all these build tools have in common, are:
* reliable
* correct
* very fast
* reproducible
It must not always be the other build tool, this project is currently
using. Or, quoting Gerrit Code Review maintainer here:
"Friends, don't let friends use <the other build tool system>!"
This change is non-complete implementation of JGit build in Buck,
needed by Gerrit Code Review to replace its dependency with standlone
JGit cell. This is very useful when a developer is working on both
projects and is trying to integrate changes made in JGit in Gerrit.
The supported workflow is:
$ cd jgit
$ emacs <hack>
$ cd ../gerrit
$ buck build --config repositories.jgit=../jgit gerrit
With --config repositories.jgit=../jgit jgit cell is routed through
JGit development tree.
To build jgit, issue:
$ buck build //:jgit
[-] PROCESSING BUCK FILES...FINISHED 0,0s
Yes, you can't measure no-op build time, given that Buck daemon is
used.
Change-Id: I301a71b19fba35a5093d8cc64d4ba970c2877a44
Signed-off-by: David Ostrovsky <david@ostrovsky.org>
Pushing curl repository to gerrit fails with a message:
remote: error: internal error while processing changes
java.nio.charset.IllegalCharsetNameException: 'utf8'
curl repository url: https://github.com/bagder/curl.git
To avoid this problem encodingAliases in RawParseUtils have
been extended to contain "'utf8'" (single quoted utf8) string.
Change-Id: I40f613cfdcabf0dc9455bee45116ab8d8c7dd6ee
Signed-off-by: Eryk Szymanski <eryksz@gmail.com>
Accept some of the same section keys that fsck does in git-core,
allowing repositories to skip over specific kinds of acceptable
broken objects, e.g.:
[fsck]
duplicateEntries = ignore
zeroPaddedFilemode = ignore
The zeroPaddedFilemode = ignore is a synonym for the JGit specific
allowLeadingZeroFileMode = true. Only accept the JGit key if git-core
key was not specified.
Change-Id: Idaed9310e2a5ce5511670ead1aaea2b30aac903c
Some ancient objects may be broken, but in a relatively harmless way.
Allow the ObjectChecker caller to whitelist specific objects that are
going to fail checks, but that have been reviewed by a human and decided
the objects are OK enough to permit continued use of.
This avoids needing to rewrite history to scrub the broken objects out.
Honor the git-core fsck.skipList configuration setting when receiving a
push or fetching from a remote repository.
Change-Id: I62bd7c0b0848981f73dd7c752860fd02794233a6
Base Java version for JGit is now Java 7. The java.text.Normalizer
class was available in Java 6. Reflection is no longer required to
normalize strings for Mac OS X.
Change-Id: I98e14b72629a7a729a2d40a3aa275932841274e8
This avoids duplication of code between receive-pack and fetch-pack paths.
Separate methods are still required to check use of receive.fsckobjects vs.
fetch.fsckobjects, both of which default to transfer.fsckobjects.
Change-Id: I41193e093e981a79fc2f63914e273aaa44b82162
Hoist ObjectIdSet up to lib as part of the public API and add
the interface to some common types like PackIndex and JGit custom
ObjectId map types. This cleans up wrapper code in a number of
places by allowing direct use of the types as an ObjectIdSet.
Future commits can now rely on ObjectIdSet as a simple read-only
type to check a set of objects from a number of storage options.
Change-Id: Ib62b062421d475bd52abd6c84a73916ef36e084b
If a file (e.g. "A") and a subtree file (e.g. "A/foo.c") both appear
in the DirCache this cache should not be written out as a tree object.
The "A" file and "A" subtree conflict with each other in the same tree
and will fail fsck.
Detect this condition during DirCacheBuilder and DirCacheEditor
finish() so the application can be halted early before it updates a
DirCache that might later write an invalid tree structure.
Change-Id: I95660787e88df336297949b383f4c5fda52e75f5
If a PathEdit tries to store a file where a subtree was, or a subtree
where a file was, replace the entry in the DirCache with the new
name(s). This supports switching between file and tree entry types
using a DirCacheEditor.
Add new unit tests to cover the conditions where these can happen.
Change-Id: Ie843d9388825f9e3d918a5666aa04e47cd6306e7
Adding a path that already exists but is changing type such as
from symlink to subdirectory requires a NameConflictTreeWalk to
match up the two different entry types that share the same name.
NameConflictTreeWalk needs a bug fix to pop conflicting entries
when PathFilterGroup aborts the walk early so that it does not
allow DirCacheBuilderIterator to copy conflicting entries into
the output cache.
Change-Id: I61b49cbe949ca8b4b98f9eb6dbe7b1f82eabb724
This fixes the command below:
jgit commit a -m "added file a"
which currently fails with:
org.eclipse.jgit.api.errors.JGitInternalException: The combination of
arguments --all and --only is not allowed
Bug: 484973
Change-Id: I37a4ccd68101a66520ef99110f7aa0cbdcc8beba
Signed-off-by: Andrey Loskutov <loskutov@gmx.de>
This will execute git commands (with arguments) specified on the command
line, handy for developing/debugging a sequence of arbitrary git
commands working on same repository.
The git working dir path can be specified via Java system property
"git_work_tree". If not specified, current directory will be used.
Change-Id: I621a9ec198c31e28a383818efeb4b3f835ba1d6f
Signed-off-by: Andrey Loskutov <loskutov@gmx.de>
Neaten up formatting and avoid strings, which prevents the need for
NLS comment tags. Instead check the last character using char
literal, and append a char literal instead of a string.
Change-Id: Ib68e017769a1f5c03200354a805769d585a48c8b
Similar to nested directories, nested copyfiles won't work with git submodule
either.
Change-Id: Idbe965ec20a682fca0432802858162f8238f05de
Signed-off-by: Yuxuan 'fishy' Wang <fishywang@google.com>
Handle existing symlink as a file, not as directory if deleting a file
before creating (overriding) a symlink.
Bug: 484491
Change-Id: I29dbf57d1daec2ba98454975b093e1d381d05196
Signed-off-by: Andrey Loskutov <loskutov@gmx.de>
Keep a user amused while the server does work by spinning a
little ASCII-art object on a single line.
Change-Id: Ie8f181d1aa606d4ae69e5d3ca4db387cea739f38
Previously, non-reuse deltas were only included in packStatistics if they
were not cached by the deltaWindow.
Change-Id: I7684d8214875f0a7569b34614f8a3ba341dbde9c
Signed-off-by: James Kolb <jkolb@google.com>
When setting timeout on push, BasePackConnection creates a timer, which
will be terminated when push finishes. But, when using
SmartHttpPushConnection, it dropped the first timer created in the
constructor and then created another timer in doPush. If new threads are
created faster than the gc collects then this may stop the service if
it's hitting the max process limit. Hence don't create a new timer if it
already exists.
Bug: 474947
Change-Id: I6746ffe4584ad919369afd5bdbba66fe736be314
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
PathFilter and PathFilterGroup form JGit's implementation of git's
path-limiting feature in commands like log and diff. To save time
when traversing trees, a path specification
foo/bar/baz
tells the tree walker not to traverse unrelated trees like qux/. It
does that by returning false from include when the tree walker is
visiting qux and true when it is visiting foo.
Unfortunately that test was implemented to be slightly over-eager: it
doesn't only return true when asked whether to visit a subtree "foo"
but when asked about a plain file "foo" as well. As a result, diffs
and logs restricted to some-file/non-existing-suffix unexpectedly
match against some-file:
$ jgit log -- LICENSE/no-such-file
commit 629fd0d594
Author: Shawn O. Pearce <spearce@spearce.org>
Date: Fri Jul 02 14:52:49 2010 -0700
Clean up LICENSE file
[...]
Fix it by checking against the entry's mode.
Gitiles +log has the same bug and benefits from the same fix.
Callers know not to worry about what subtrees are included in the tree
walk because shouldBeRecursive() returns true in this case, so this
behavior change should be safe. This also better matches the behavior
of C git:
$ empty=$(git mktree </dev/null)
$ git diff-tree --abbrev $empty HEAD -- LICENSE/no-such-file
$ git diff-tree --abbrev $empty HEAD -- tools/no-such-file
:000000 040000 0000000... b62648d... A tools
Bug: 484266
Change-Id: Ib4d53bddd8413a9548622c7b25b338d287d8889d
Pushing with JGit commandline to e.g. Github failed with "unauthorized"
since HttpUrlConnection calls the configured authenticator implicitly.
The problem is that during a push two requests are sent to the server,
first a GET and then a POST (containing the pack data). The first GET
request sent anonymously is rejected with 401 (unauthorized). When an
Authenticator is installed the java.net classes will use the
Authenticator to ask the user for credentials and retry the request.
But this happens under the hood and JGit level code doesn't see that
this happens.
The next request is the POST but since JGit thinks the first GET request
went through anonymously it doesn't add authentication headers to the
POST request. This POST of course also fails with 401 but since this
request contains a lot of body-data streamed from JGit (the pack file!)
the java.net classes can't simply retry the request with authorization
headers. The whole process fails.
Fix this by using Apache httpclient which doesn't use Authenticator to
retrieve credentials. Instead initialize TransportCommand to use the
default credential provider if no other credentials provider was set
explicitly. org.eclipse.jgit.pgm.Main sets this default for the JGit
command line client.
Change-Id: Ic4e0f8b60d4bd6e69d91eae0c7e1b44cdf851b00
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
BasePackPushConnection#readStringLongTimeout() was setting a timeout 10
times bigger than some other timeout or the pack transfer time. This
could lead to negative integer values when we hit an arithmetic
overflow. Add a check for this situation and set the timeout to
Integer.MAX_VALUE when overflow happens.
Bug: 484352
CC: Eugene Petrenko <eugene.petrenko@gmail.com>
Change-Id: Ie2a86312c1bcb1ec3e6388fa490ab3c845d41808
This change fixes all compiler errors in JGit and replaces possible
NPE's with either appropriate exceptions, avoiding multiple "Nullable
return" method calls or early returning from the method.
Change-Id: I24c8a600ec962d61d5f40abf73eac4203e115240
Signed-off-by: Andrey Loskutov <loskutov@gmx.de>
If an application uses PushConnection directly on the native Git wire
protocols JGit should send along the application's expected oldId, not
the advertised value. This allows the remote peer to compare-and-swap
since it was not tested inside JGit.
Discovered when I tried to use a PushConnection (bypassing the
standard PushProcess) and the client blindly overwrote the remote
reference, even though my app had supplied the wrong ObjectId for
the expectedOldObjectId. This was not expected and cost me over an
hour of debugging, plus "corruption" in the remote repository.
By passing along the exact expectedOldObjectId from the app the
remote side can do the check that the application skipped, and
avoid data loss.
Change-Id: Id3920837e6c47100376225bb4dd61fa3e88c64db
FileTreeIterator was calling by mistake
WorkingTreeIterator.idSubmodule(Entry). Instead it should always compute
idSubmodule on its own.
Change-Id: Id1b988aded06939b1d7edd2671e34bf756896c0e
In I1f5dc07182dbf6bba2a9f4807fdd25b475da4ead, FileBasedConfig got
support for reading a configuration with UTF8 BOM. Apply the same
support to BlobBasedConfig, to make SubmoduleWalk able to parse
.gitmodules configurations with BOM.
Change-Id: I25b5474779952fe2c076180b96fc2869eef190a8
Signed-off-by: Doug Kelly <dougk.ff7@gmail.com>
Shawn Pearce
Shawn Pearce
David Ostrovsky
Eryk Szymanski
Matthias Sohn
Andrey Loskutov
Dmitry Neverov
Yuxuan 'fishy' Wang
James Kolb
Jonathan Nieder
Mike Gilbode
Christian Halstrick
Kaloyan Raev
Doug Kelly