Not all occurrences of ".git" are replaced by this constant, only
those where it actually refers to the directory with that name, i.e
not the ".git" directory suffix.
Asserts and comment are also excluded from replacement.
Change-Id: I65a9da89aedd53817f2ea3eaab4f9c2bed35d7ee
Signed-off-by: Robin Rosenberg <robin.rosenberg@dewire.com>
As discussed on the jgit-dev list here:
http://dev.eclipse.org/mhonarc/lists/egit-dev/msg00654.html
- Define a separate JGit feature.
- As of now create a separate JGit update site and zip it.
Change-Id: Ie4026f15f6250c4933dccf6f31b5009b90c036bc
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
No Eclipse support for this project is provided, because the
Jetty project does not publish a complete P2 repository.
Change-Id: Ic5fe2e79bb216e36920fd4a70ec15dd6ccfd1468
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
The dumb HTTP transport needs to download the HEAD ref and
resolve it manually if HEAD does not appear in info/refs.
Its typically for it to not be in the info/refs file.
Change-Id: Ie2a58fdfacfeee530b10edb433b8f98c85568585
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
During fetch over http:// clients now try to take advantage of
the info/refs?service=git-upload-pack URL to determine if the
remote side will support a standard upload-pack command stream.
If so each block of 32 have lines is sent in one POST request,
prefixed by all of the 'want' lines and any previously discovered
common bases as 'have' lines.
During push over http:// clients now try to take advantage of
the info/refs?service=git-receive-pack URL to determine if the
remote side will support a standard receive-pack command stream.
If so, commands are sent along with their pack in a single HTTP
POST request.
Bug: 291002
Change-Id: I8c69b16ac15c442e1a4c3bd60b4ea1a47882b851
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Clients can request smart fetch support by examining the info/refs URL
with the service parameter set to the magic git-upload-pack string:
GET /$GIT_DIR/info/refs?service=git-upload-pack HTTP/1.1
The response is formatted with the upload pack capabilities, using
the standard packet line formatter. A special header line is put
in front of the standard upload-pack advertisement to let clients
know the service was recognized and is supported.
If the requested service is disabled an authorization status code is
returned, allowing the user agent to retry once they have obtained
credentials from a human, in case authentication is required by
the configured UploadPackFactory implementation.
Change-Id: Ib0f1a458c88b4b5509b0f882f55f83f5752bc57a
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Clients can request smart push support by examining the info/refs URL
with the service parameter set to the magic git-receive-pack string:
GET /$GIT_DIR/info/refs?service=git-receive-pack HTTP/1.1
The response is formatted with the receive pack capabilities, using
the standard packet line formatter. A special header block is put
in front of the standard receive-pack advertisement to let clients
know the service was recognized and is supported.
If the requested service is disabled an authorization status code is
returned, allowing the user agent to retry once they have obtained
credentials from a human, in case authentication is required by
the configured ReceivePackFactory implementation.
Change-Id: Ie4f6e0c7b68a68ec4b7cdd5072f91dd406210d4f
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
This is a simple HTTP server that provides the minimum server side
support required for dumb (non-git aware) transport clients.
We produce the info/refs and objects/info/packs file on the fly
from the local repository state, but otherwise serve data as raw
files from the on-disk structure.
In the future we could better optimize the FileSender class and the
servlets that use it to take advantage of direct file to network
APIs in more advanced servlet containers like Jetty.
Our glue package borrows the idea of a micro embedded DSL from
Google Guice and uses it to configure a collection of Filters
and HttpServlets, all of which are matched against requests using
regular expressions. If a subgroup exists in the pattern, it is
extracted and used for the path info component of the request.
Change-Id: Ia0f1a425d07d035e344ae54faf8aeb04763e7487
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
By making this class and its methods public, and the actual writing
abstract, we can reuse this code for other formats like writing an
info/refs file for HTTP transports.
Change-Id: Id0e349c30a0f5a8c1527e0e7383b80243819d9c5
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
If biDirectionalPipe is false UploadPack does not start out with
the advertisement but instead assumes it should read one block of
want/have lines, process that, and write the ACK/NAKs out.
This means it only is doing one read through the input followed by
one write to the output, which fits with the HTTP request processing
model, and any other type of RPC system.
Change-Id: Ia9f7c46ee556f996367180f15d2caa8572cdd59f
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
If biDirectionalPipe is false ReceivePack does not start out with the
advertisement but instead assumes it should read the command set once,
process that, and write the status report out. This means it only is
doing one read through the input followed by one write to the output,
which fits with the HTTP request processing model, and any other type
of RPC system... assuming that the payload for input can be a very big
entity like the command stream followed by the pack file.
Change-Id: I6f31f6537a3b7498803a8a54e10b0622105718c1
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Later we are going to add support for smart HTTP, which requires us to
buffer at least some of the request created by a client before we ship
it to the server. For many requests, we can fit it completely into a
1 MiB buffer, but if it doesn't we can drop back to using the chunked
transfer encoding to send an unknown stream length.
Rather than recoding the block based memory buffer, we refactor the
local file overflow strategy into a subclass, allowing the HTTP client
code to replace this portion of the logic with its own approach to
start the chunked encoding request.
Change-Id: Iac61ea1017b14e0ad3c4425efc3d75718b71bb8e
Signed-off-by: Shawn O. Pearce <sop@google.com>
The multi_ack_detailed extension breaks out the "ACK %s continue" status
code into "ACK %s common" and "ACK %s ready" states, making it easier to
discover which objects are truely common, and which objects are simply
on a chain the server doesn't care learning about.
Change-Id: Ie8e907424cfbbba84996ca205d49eacf339f9d04
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
These routines create a fairly clean DSL for writing out the
structure of a repository in a test case. Abstract them into
a helper class that we can reuse in other test environments.
Change-Id: I55cce3d557e1a28afe2fdf37b3a5b67e2651c9f1
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Under unit tests we want the when and timezone to come from the
MockSystemReader and be stable. We did this for the default
constructor based on the Repository, but failed to do it for the
name,emailAddress variant of the constructor.
Change-Id: I608ac7cf01673729303395e19b379b38fef136b3
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
We really mean to omit HEAD here, but botched the difference between
getOrigName and getName on the Ref object. We tested on the wrong
value, picking up the target of the symbolic ref and therefore
included it twice.
Change-Id: If780c65166ccada2e63a4f42bbab752a56b16564
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Other test suites may find this useful, especially when trying
to defeat the pack file compression with random data files.
Change-Id: Ic00a4ac626af7a1c94d18ee99305e295b267b1a3
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Since Robin reverted using the maven-bundle-plugin to produce the
OSGi manifest, there is no reason for us to reference it from our
build process anymore.
Also, when Robin reverted the to the Eclipse way of doing things,
we failed to update the ignore files to ignore our generated files
but not ignore our tracked .classpath.
Finally, we cannot delete the MANIFEST.MF file during a Maven build,
as this is once again a source file.
Change-Id: I53f77f2002cb4285f728968829560e835651e188
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
This restores the ability to build using just Eclipse without
strange procedures, extra plugins and it is again possible to
work on both JGit and EGit in the same Eclipse workspace with
ease.
Change-Id: I0af08127d507fbce186f428f1cdeff280f0ddcda
Signed-off-by: Robin Rosenberg <robin.rosenberg@dewire.com>
The C Git documentation stated that the core.worktree config was
not read when the .git directory was found implicitly (from the
working directory).
This was not true, and had not been so for a long time. The
documentation has been updated to document the existing behaviour.
Change-Id: If1e81b6a981b9d70e849f24872f01c110e9bc950
Signed-off-by: Robin Rosenberg <robin.rosenberg@dewire.com>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Deflater can use significant amount of native (i.e. C) heap
space. Failure to promptly release this memory results
in native memory leak in some cases, particularly severe for
VMs with large java max heap size. For example, running
Team->Commit in one of my EGit workspaces results in ~500M
java process size increase without any significant change
to amount of used java heap when JVM is started with -Xmx1024m.
Change-Id: I649679a8df5683ebedd9380d703513d31c625932
Signed-off-by: Igor Fedorenko <igor@ifedorenko.com>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Default maven-bundle-plugin behaviour results in use of the same
.SNAPSHOT OSGi bundle version qualifier for all snapshot builds.
This causes problems for eclipse update manager and other consumers
that rely on OSGi bundle metadata to select "newer" or "best
matching" version of jgit bundle.
To solve the problem, maven-bundle-plugin is configured to replace
.SNAPSHOT with build timestamp in format like 20100106-1234.
Change-Id: I0999c7bd68aa2ee74dffaed54a8dc4e1b67cf80d
Signed-off-by: Igor Fedorenko <igor@ifedorenko.com>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Per CQ 3559 "JGit - Eugene Myers O(ND) difference algorithm" we
have approval to check this into our master branch.
* cq-diff:
Add file content merge algorithm
Add performance tests for MyersDiff
Add javadoc comments, remove unused code, shift comments to correct place
Fixed MyersDiff to be able to handle more than 100k
Fix some warnings regarding unnecessary imports and accessing static methods
Add the "jgit diff" command
Prepare RawText for diff-index and diff-files
Add a test class for Myers' diff algorithm
Add Myers' algorithm to generate diff scripts
Add set to IntList
Conflicts:
org.eclipse.jgit/src/org/eclipse/jgit/diff/RawText.java
Change-Id: Ia8e98d81ba1ab52f84d0258a40e6ef5eece9a5b1
CC: Christian Halstrick <christian.halstrick@sap.com>
Adds the file content merge alorithm and tests for merge to jgit.
The merge algorithm:
- Gets as input parameters the common base, the two new contents
called "ours" and "theirs".
- Computes the Edits from base to ours and from base to theirs with
the help of MyersDiff.
- Iterates over the edits.
- Independent edits from ours or from theirs will just be applied
to the result.
- For conflicting edits we first harmonize the ranges of the edits
so that in the end we have exactly two edits starting and ending
at the same points in the common base. Then we write the two
conclicting contents into the result stream.
Change-Id: I411862393e7bf416b6f33ca55ec5af608ff4663
Signed-off-by: Christian Halstrick <christian.halstrick@sap.com>
[sp: Fixed up two awkard comments in documentation.]
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
The UnionInputStream utility class combines multiple sequential
InputStreams so they appear to the caller as a single stream with
no gaps. This can be used to concentate streams coming from multiple
independent HTTP connections (for example).
The companion unit test covers the class's full functionality.
Change-Id: I0676c7b5e082a5886bf0e8f43f9fd6c46a666228
Signed-off-by: Shawn O. Pearce <sop@google.com>
This exposes the list of known packs, allowing callers to list them
into a context like the objects/info/packs file.
Change-Id: I0b889564bd176836ff5c77ba310c6d229409dcd5
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Tycho isn't production ready for projects like JGit to be using as
their primary build driver. Some problems we ran into with Tycho
0.6.0 that are preventing us from using it are:
* Tycho can't run offline
The P2 artifact resolver cannot perform its work offline. If the
build system has no network connection, it cannot compile a
project through Tycho. This is insane for a distributed version
control system where developers are used to being offline during
development and local testing.
* Magic state in ~/.m2/repository/.meta/p2-metadata.properties
Earlier iterations of this patch tried to use a hybrid build,
where Tycho was only used for the Eclipse specific feature and P2
update site, and maven-bundle-plugin was used for the other code.
This build seemed to work, but only due to magic Tycho specific
state held in my local home directory. This means builds are not
consistently repeatable across systems, and lead me to believe
I had a valid build, when in fact I did not.
* Manifest-first build produces incomplete POMs
The POM created by the manifest-first build format does not
contain the dependency chain, leading a downstream consumer to
not import the runtime dependencies necessary to execute the
bundle it has imported. In JGit's case, this means JSch isn't
included in our dependency chain.
* Manifest-first build produces POMs unreadable by Maven 2.x
JGit has existing application consumers who are relying on
Maven 2.x builds. Forcing them to step up to an alpha release
of Maven 3 is simply unacceptable.
* OSGi bundle export data management is tedious
Editing each of our pom.xml files to mark a new release is
difficult enough as it is. Editing every MANIFEST.MF file to
list our exported packages and their current version number is
something a machine should do, not a human. Yet the Tycho OSGi
way unfortunately demands that a human do this work.
* OSGi bundle import data management is tedious
There isn't a way in the MANIFEST.MF file format to reuse the
same version tags across all of our imports, but we want to have
a consistent view of our dependencies when we compile JGit.
After wasting more than 2 full days trying to get Tycho to work,
I've decided its a lost cause right now. We need to be chasing down
bugs and critical features, not trying to bridge the gap between
the stable Maven repository format and the undocumented P2 format
used only by Eclipse.
So, switch the build to use Apache Felix's maven-bundle-plugin.
This is the same plugin Jetty uses to produce their OSGi bundle
manifests, and is the same plugin used by the Apache Felix project,
which is an open-source OSGi runtime. It has a reasonable number
of folks using it for production builds, and is running on top of
the stable Maven 2.x code base.
With this switch we get automatically generated MANIFEST.MF files
based on reasonably sane default rules, which reduces the amount
of things we have to maintain by hand. When necessary, we can add
a few lines of XML to our POMs to tweak the output.
Our build artifacts are still fully compatible with Maven 2.x, so
any downstream consumers are still able to use our build products,
without stepping up to Maven 3.x. Our artifacts are also valid as
OSGi bundles, provided they are organized on disk into a repository
that the runtime can read.
With maven-bundle-plugin the build runs offline, as much as Maven
2.x is able to run offline anyway, so we're able to return to a
distributed development environment again.
By generating MANIFEST.MF at the top level of each project (and
therefore outside of the target directory), we're still compatible
with Eclipse's PDE tooling. Our projects can be imported as standard
Maven projects using the m2eclipse plugin, but the PDE will think
they are vaild plugins and make them available for plugin builds,
or while debugging another workbench.
This change also completely removes Tycho from the build.
Unfortunately, Tycho 0.6.0's pom-first dependency resolver is broken
when resolving a pom-first plugin bundle through a manifest-first
feature package, so bundle org.eclipse.jgit can't be resolved,
even though it might actually exist in the local Maven repository.
Rather than fight with Tycho any further, I'm just declaring it
plugina-non-grata and ripping it out of the build.
Since there are very few tools to build a P2 format repository, and
no documentation on how to create one without running the Eclipse
UI manually by poking buttons, I'm declaring that we are not going
to produce a P2 update site from our automated builds.
Change-Id: If7938a86fb0cc8e25099028d832dbd38110b9124
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
This makes the jgit command line behave like the C Git implementation
in the respect.
These variables are not recognized in the core, though we add support
to do the overrides there. Hence other users of the JGit library, like
the Eclipse plugin and others, will not be affected.
GIT_DIR
The location of the ".git" directory.
GIT_WORK_TREE
The location of the work tree.
GIT_INDEX_FILE
The location of the index file.
GIT_CEILING_DIRECTORIES
A colon (semicolon on Windows) separated list of paths that
which JGit will not cross when looking for the .git directory.
GIT_OBJECT_DIRECTORY
The location of the objects directory under which objects are
stored.
GIT_ALTERNATE_OBJECT_DIRECTORIES
A colon (semicolon on Windows) separated list of object directories
to search for objects.
In addition to these we support the core.worktree config setting when
the git directory is set deliberately instead of being found.
Change-Id: I2b9bceb13c0f66b25e9e3cefd2e01534a286e04c
Signed-off-by: Robin Rosenberg <robin.rosenberg@dewire.com>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
An extra flag when creating a RefUpdate object allows the
caller to destroy the symref and replace it with an object
ref, a.k.a. detached HEAD.
Change-Id: Ia88d48eab1eb4861ebfa39e3be9258c3824a19db
Signed-off-by: Robin Rosenberg <robin.rosenberg@dewire.com>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
A few locations were doing OBJECT_ID_LENGTH * 2 on their own, as
the old STR_LEN constant wasn't visible. Replace them with the
new public constant OBJECT_ID_STRING_LENGTH.
Change-Id: Id39bddb52de8c65bb097de042e9d4ed99598201f
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Since Constants.OBJECT_ID_LENGTH is a compile time constant we
can be sure that it will always be inlined. The same goes for the
associated constant STR_LEN which is now refactored to the Constant
class and given a name better suited for wider use.
Change-Id: I03f52131e64edcd0aa74bbbf36e7d42faaf4a698
Signed-off-by: Robin Rosenberg <robin.rosenberg@dewire.com>
The test data is expected to have unix new lines by tests, but it
is converted to crlf on Windows platform (with msys git). As result
DiffFormatterReflowTest tests fail. To prevent this problem,
crlf conversion is disbled for test data related to that test.
Bug: 295077
Change-Id: I67d3ed543fcc38647041896146de12b1781ec6be
Signed-off-by: Constantine Plotnikov <constantine.plotnikov@gmail.com>
The comment indicates that a well-behaved client should not have
sent an update for a ref that already exists, but this in a block
that corresponds to a create command.
Instead do nothing. For now, save() will fail and the config
file is set to null, which may surprise some calling tests.
Change-Id: I1c65f8b1131569da01b4ef33678d813565521fbb
Signed-off-by: Robin Rosenberg <robin.rosenberg@dewire.com>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Changed Tycho version from 0.6.0-SNAPSHOT to 0.6.0 (i.e. release).
SNAPSHOT versions are transient and should only be used for testing
purposes only. Also removed now unnecessary <pluginRepositories/>
element from JGit parent pom.xml file.
Change-Id: Ie386b2dbcba43c1ccec10465978d12d6829c6150
Signed-off-by: Igor Fedorenko <igor@ifedorenko.com>
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
target/ is for Maven build output
compile.org.eclipse.jgit.xml is generated on Export - Deployable Features
Signed-off-by: Mykola Nikishov <mn@mn.com.ua>
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Change-Id: I557a95792fd45c3cfe37098e057c1e70660b3308
Matthias Sohn
Shawn Pearce
Robin Rosenberg
Shawn O. Pearce
Igor Fedorenko
Christian Halstrick
Code Review
Constantine Plotnikov
Nico Sallembien
Mykola Nikishov