The submodule.name.fetchRecurseSubmodules value was being read from the
configuration of the submodule, but it should be read from the config
of the parent repository.
Also, the fetch.recurseSubmodules value from the parent repository's
configuration was not being considered at all.
Fix both of these and add tests. Now the precedence of the recurse mode
is determined as follows:
1. Value passed to the API
2. Value configured in submodule.name.fetchRecurseSubmodules
3. Value configured in fetch.recurseSubmodules
4. Default to "on demand"
Change-Id: Ic23b7c40b5f39135fb3fd754c597dd4bcc94240c
Extend FetchCommand to expose a new method, setRecurseSubmodules(mode),
which allows to set the mode to ON, OFF or ON_DEMAND.
After fetching a repository, its submodules are recursively fetched:
- When the mode is YES, submodules are always fetched.
- When the mode is NO, submodules are not fetched.
- When the mode is ON_DEMAND, submodules are only fetched when the
parent repository receives an update of the submodule and the new
revision is not already in the submodule.
The mode is determined in the following order of precedence:
- Value specified in the API call using setRecurseSubmodules.
- Value specified in the repository's config under the key
submodule.name.fetchRecurseSubmodules
- Defaults to ON_DEMAND if neither of the previous is set.
Extend FetchResult to recursively include results for submodules, as
a map of the submodule path to an instance of FetchResult.
Test setup is based on testCloneRepositoryWithNestedSubmodules.
Change-Id: Ibc841683763307cb76e78e142e0da5b11b1add2a
Signed-off-by: David Pursehouse <david.pursehouse@gmail.com>
This operation was added recently with the goal to provide some
way to auto-correct invalid user input, or to provide a correction
suggestion to the user -- EGit uses it now that way. But the initial
implementation was very restrictive; it removed all non-ASCII
characters and even slashes.
Understandably end users were not happy with that. Git has no such
restriction to ASCII-only; nor does JGit. Branch names should be
meaningful to the end user, and if a user-supplied branch name is
invalid for technical reasons, a "normalized" name should still
be meaningful to the user.
Rewrite to attempt a minimal fix such that the result will pass
isValidRefName.
* Replace all Unicode whitespace by underscore.
* Replace troublesome special characters by dash.
* Collapse sequences of underscores, dots, and dashes.
* Remove underscores, dots, and dashes following slashes, and
collapse sequences of slashes.
* Strip leading and trailing sequences of slashes, dots, dashes,
and underscores.
* Avoid the ".lock" extension.
* Avoid the Windows reserved device names.
* If input name is null return an empty String so callers don't need to
check for null.
This still allows branch names with single slashes as separators
between components, avoids some pitfalls that isValidRefName() tests
for, and leaves other character untouched and thus allows non-ASCII
branch names.
Also move the function from the bottom of the file up to where
isValidRefName is implemented.
Bug: 512508
Change-Id: Ia0576d9b2489162208c05e51c6d54e9f0c88c3a7
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Update SHA1 class to include a Java port of sha1dc[1]'s ubc_check,
which can detect the attack pattern used by the SHAttered[2] authors.
Given the shattered example files that have the same SHA-1, this
modified implementation can identify there is risk of collision given
only one file in the pair:
$ jgit ...
[main] WARN org.eclipse.jgit.util.sha1.SHA1 - SHA-1 collision 38762cf7f55934b34d179ae6a4c80cadccbb7f0a
When JGit detects probability of a collision the SHA1 class now warns
on the logger, reporting the object's SHA-1 hash, and then throws a
Sha1CollisionException to the caller.
From the paper[3] by Marc Stevens, the probability of a false positive
identification of a collision is about 14 * 2^(-160), sufficiently low
enough for any detected collision to likely be a real collision.
git-core[4] may adopt sha1dc before the system migrates to an entirely
new hash function. This commit enables JGit to remain compatible with
that move to sha1dc, and help protect users by warning if similar
attacks as SHAttered are identified.
Performance declined about 8% (detection off), now:
MessageDigest 238.41 MiB/s
MessageDigest 244.52 MiB/s
MessageDigest 244.06 MiB/s
MessageDigest 242.58 MiB/s
SHA1 216.77 MiB/s (was ~240.83 MiB/s)
SHA1 220.98 MiB/s
SHA1 221.76 MiB/s
SHA1 221.34 MiB/s
This decline in throughput is attributed to the step loop unrolling in
compress(), which was necessary to easily fit the UbcCheck logic into
the hash function. Using helper functions s1-s4 reduces the code
explosion, providing acceptable throughput.
With detection enabled (default):
SHA1 detectCollision 180.12 MiB/s
SHA1 detectCollision 181.59 MiB/s
SHA1 detectCollision 181.64 MiB/s
SHA1 detectCollision 182.24 MiB/s
sha1dc (native C) ~206.28 MiB/s
sha1dc (native C) ~204.47 MiB/s
sha1dc (native C) ~203.74 MiB/s
Average time across 100,000 calls to hash 4100 bytes (such as a commit
or tree) for the various algorithms available to JGit also shows SHA1
is slower than MessageDigest, but by an acceptable margin:
MessageDigest 17 usec
SHA1 18 usec
SHA1 detectCollision 22 usec
Time to index-pack for git.git (217982 objects, 69 MiB) has increased:
MessageDigest SHA1 w/ detectCollision
------------- -----------------------
20.12s 25.25s
19.87s 25.48s
20.04s 25.26s
avg 20.01s 25.33s +26%
Being implemented in Java with these additional safety checks is
clearly a penalty, but throughput is still acceptable given the
increased security against object name collisions.
[1] https://github.com/cr-marcstevens/sha1collisiondetection
[2] https://shattered.it/
[3] https://marc-stevens.nl/research/papers/C13-S.pdf
[4] https://public-inbox.org/git/20170223230621.43anex65ndoqbgnf@sigill.intra.peff.net/
Change-Id: I9fe4c6d8fc5e5a661af72cd3246c9e67b1b9fee6
The TreeWalk filtering classes need to support the three different
meanings of the return value the path comparison generates.
A new path comparison method (isPathMatch) is created with
three distinct return values (isPathPrefix use value '0' to
encode two of these) which will makes it possible for the logical
operators (especially NOT) to aggregate a correct verdict.
A filter like: AND(Path("path"), NOT(Path("path/to/other")))
Should filter out 'path/to/other/file', but not 'path/to/my/file'.
The path-limiting feature when testing path/to/my/file, would
result to run test for the following paths:
path
path/to
path/to/my
path/to/my/file
isPathPrefix('path/to/other') will return '0' for the first two
and since there is no way for NOT to distinguish between an exact
match and a match indicating that the tested path is a 'parent',
it will incorrectly return false and thus remove everything below
'path' immediately.
isPathMatch has a distinguished value for 'parent' matches that
will be preserved through the logic operators and should not
cause an over-eager removal of paths.
The functionality of isPathPrefix is required by other parts
and is untouched.
Unit tests are included to ensure that the logical functionality
is correct and can be preserved.
Change-Id: Ice2ca9406f09f1b179569e99b86a0e5d77baa20d
Signed-off-by: Magnus Vigerlöf <magnus.vigerlof@gmail.com>
Allow SHA1 instances to be reused to compute another hash value, and
resume caching them in ObjectInserter and PackParser. This shaves a
small amount of running time off parsing git.git's pack file:
before after
------ ------
25.25s 25.55s
25.48s 25.06s
25.26s 24.94s
Almost noise (small difference), but recycling the instances reduces
some stress on the memory allocator finding two 80 word message block
arrays needed for hashing and collision detection.
Change-Id: I4af88a720e81460293bc5c5d1d3db1a831e7e228
Generate names for objects using only the pure Java SHA1
implementation, but continue using MessageDigest in tests.
This opens the possibility of changing the hashing function
to incorporate additional safety measures, such as those
used in sha1dc[1].
Since MessageDigest has higher throughput, continue using
MessageDigest for computing pack, idx and DirCache trailers.
These are less likely to be sensitive to SHAttered[2] types
of attacks, as Git uses them to detect random bit flips
during transfer, and not for content identity.
[1] https://github.com/cr-marcstevens/sha1collisiondetection
[2] https://shattered.it/
Change-Id: If6da98334201f7f20cb916e46f782c45f373784e
This implementation is derived straight from the description written
in RFC 3174. On Mac OS X with Java 1.8.0_91 it offers similar
throughput as MessageDigest SHA-1:
system 239.75 MiB/s
system 244.71 MiB/s
system 245.00 MiB/s
system 244.92 MiB/s
sha1 234.08 MiB/s
sha1 244.50 MiB/s
sha1 242.99 MiB/s
sha1 241.73 MiB/s
This is the fastest implementation I could come up with. Common SHA-1
implementation tricks such as unrolling loops creates a method too
large for the JIT to effectively optimize, resulting in lower overall
hashing throughput. Using a preprocessor to perform the register
renaming of A-E also didn't help, as again the method was too large
for the JIT to effectively optimize.
Fortunately the fastest version is a naive, straight-forward
implementation very close to the description in RFC 3174.
Change-Id: I228b05c4a294ca2ad51386cf0e47978c68e1aa42
Since the introduction of generic type parameter inference in Java 7,
it's not necessary to explicitly specify the type of generic parameters.
Enable the warning in Eclipse, and fix all occurrences.
Change-Id: I9158caf1beca5e4980b6240ac401f3868520aad0
Signed-off-by: David Pursehouse <david.pursehouse@gmail.com>
In 0bff481d45 to accurately use the two
limits it was necessary to move the LimitedInputStream out of the
PacketLineIn and further down to the PackParser. Unfortuantely this
didn't survive review, as a buggy test failed and the "fix" was to
drop this part of the code.
The maxPackSizeLimit should apply to the pack stream, not the pkt-line
framing used to send commands to control the ReceivePack instance. The
commands are controlled using a different limit. The failing test allowed
too many bytes in the pack and was only failing because it was including
the command framing. The correct fix for the test was simply to drop the
limit lower, to more closely match the actual pack size.
Change-Id: I47d3885b9d7d527e153df7ac9c62fc2865ceecf4
Set missingOverrideAnnotation=warning in Eclipse compiler preferences
which enables the warning:
The method <method> of type <type> should be tagged with @Override
since it actually overrides a superclass method
Justification for this warning is described in:
http://stackoverflow.com/a/94411/381622
Enabling this causes in excess of 1000 warnings across the entire
code-base. They are very easy to fix automatically with Eclipse's
"Quick Fix" tool.
Fix all of them except 2 which cause compilation failure when the
project is built with mvn; add TODO comments on those for further
investigation.
Change-Id: I5772061041fd361fe93137fd8b0ad356e748a29c
Signed-off-by: David Pursehouse <david.pursehouse@gmail.com>
Add a new method setTagOpt which sets the annotated tag behavior during
fetch. Pass the option to the fetch command.
No explicit tests are added; the fetch with tags functionality is already
covered by the tests of the fetch command.
Change-Id: I131e1f68d8fcced178d8fa48abf7ffab17f8e173
Signed-off-by: David Pursehouse <david.pursehouse@gmail.com>
Archived zip files for a same commit have different MD5 hash because
mdate and mdate in the header of zip entries are not specified. In
this case, Commons Compress sets an archived time.
In the original git implementation, it's set a commit time:
e2b2d6a172/archive.c (L378)
By this fix, archive command sets the commit time to ZipArchiveEntry
when RevCommit is given as an archiving target.
Change-Id: I30dd8710e910cdf42d57742f8709e9803930a123
Signed-off-by: Naoki Takezoe <takezoe@gmail.com>
Signed-off-by: David Pursehouse <david.pursehouse@gmail.com>
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
If the pruneexpire config is set to "now", then any unreferenced loose
objects are immediately eligible for gc. So there is no need to
actually write the loose objects.
Users who run hosting services which sometimes accept large, entirely
garbage packs might set the following configurations:
gc.pruneExpire = now
gc.prunePackExpire = 2.weeks
Then garbage objects will be kept around in packs, but after two weeks
the packs themselves will get deleted.
For client-side users of jgit, the default settings will loosen
garbage objects, and, after an hour, delete the old packs in which
they resided.
Change-Id: I8f686ac60b40181b1ee92ac6c313c3f33b55c44c
Signed-off-by: David Turner <dturner@twosigma.com>
Without this, using bazel 0.4.4 to build fails:
ERROR: jgit/org.eclipse.jgit/BUILD:29:1: Java compilation in rule '//org.eclipse.jgit:insecure_cipher_factory' failed: Worker process sent response with exit code: 1.
jgit/src/org/eclipse/jgit/transport/InsecureCipherFactory.java:63: error: [InsecureCryptoUsage] Insecure usage of a crypto API: the transformation is not a compile-time constant expression.
return Cipher.getInstance(algo);
^
(see http://errorprone.info/bugpattern/InsecureCryptoUsage)
Change-Id: I7f9a3a5117e42cb68544674f5312df0368aa3674
At beginning of the OBJECT_SCAN loop, it will first check if the object
exists in the last pack, however, it forgot to avoid garbage pack for
the first iteration.
Change-Id: I8a99c0f439218d19c49cd4dae891b8cc4a57099d
Signed-off-by: Zhen Chen <czhen@google.com>
There are multiple places in DfsReader to skip garbage pack if both of
the following conditions satisfied:
* AvoidUnreachable flag is set
* The pack is a garabge pack
Refactor them into a shared private method.
Change-Id: I67d6bb601db55f904437c807c6a3c36f0a723265
Signed-off-by: Zhen Chen <czhen@google.com>
Place a configurable upper bound on the amount of command data
received from clients during `git push`. The limit is applied to the
encoded wire protocol format, not the JGit in-memory representation.
This allows clients to flexibly use the limit; shorter reference names
allow for more commands, longer reference names permit fewer commands
per batch.
Based on data gathered from many repositories at $DAY_JOB, the average
reference name is well under 200 bytes when encoded in UTF-8 (the wire
encoding). The new 3 MiB default receive.maxCommandBytes allows about
11,155 references in a single `git push` invocation. A Gerrit Code
Review system with six-digit change numbers could still encode 29,399
references in the 3 MiB maxCommandBytes limit.
Change-Id: I84317d396d25ab1b46820e43ae2b73943646032c
Signed-off-by: David Pursehouse <david.pursehouse@gmail.com>
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
The renameDetector member returned by this method will be null when
following file renames has been disabled by previously calling:
setFollowFileRenames(false).
Annotate it as @Nullable and update the Javadoc to explicitly
document the null return.
Change-Id: I9bdf443a64cf3c45352d3ab023051a2e11f7426d
Signed-off-by: David Pursehouse <david.pursehouse@gmail.com>
When rebasing, force-pushing has a race condition: someone else might
have pushed a commit since the one you just rewrote. The force-with-lease
option prevents this by ensuring that the ref's old value is the one
that you expected.
Change-Id: I97ca9f8395396c76332bdd07c486e60549ca4401
Signed-off-by: David Turner <dturner@twosigma.com>
In a DFS repository the DfsGarbageCollector will typically attempt
delta compression while creating the three main pack files: GC,
GC_REST and GC_TXN. Include all of these in the wasDeltaAttempted()
decision so that future packers can bypass delta compression of
non-delta objects.
Change-Id: Ic2330c69fab0c494b920b4df0a290f3c2e1a03d7
In 8ac65d33ed PackWriter changed its
behavior to always prefer the last object representation presented
to it by the ObjectReuseAsIs implementation. This was a fix to avoid
delta chain cycles.
Unfortunately it can lead to suboptimal compression when concurrent
GCs are run on the same repository. One case is automatic GC running
(with default settings) in parallel to a manual GC that has disabled
delta reuse in order to generate new smaller deltas for the entire
history of the repository.
Running GC with no-reuse generally requires more CPU time, which
also translates to a longer running time. This can lead to a race
where the automatic GC completes before the no-reuse GC, leaving
the repository in a state such as:
no-reuse GC: size 1 GiB, mtime = 18:45
auto GC: size 8 GiB, mtime = 17:30
With the default sort ordering, the smaller no-reuse GC pack is
sorted earlier in the pack list, due to its more recent mtime.
During object reuse in a future GC, these smaller representations
are considered first by PackWriter, but are all discarded when the
auto GC file from 17:30 is examined second (due to its older mtime).
Work around this in two ways.
Well formed DFS repositories should have at most 1 GC pack. If
2 or more GC packs exist, break the sorting tie by selecting the
smaller file earlier in the pack list. This allows all normal read
code paths to favor the smaller file, which places less pressure
on the DfsBlockCache. If any GC race happens, readers serving clone
requests will prefer the file that is smaller.
During object reuse, flip this ordering so that the smaller file is
last. This allows PackWriter to see smaller deltas last, replacing
larger representations that were previously considered from other
pack files.
Change-Id: I0b7dc8bb9711c82abd6bd16643f518cfccc6d31a
Delta search was discarding discovered deltas if an object appeared
near a type boundary in the delta search window. This has caused JGit
to produce larger pack files than other implementations of the packing
algorithm.
Delta search works by pushing prior objects into a search window, an
ordered list of objects to attempt to delta compress the next object
against. (The window size is bounded, avoiding O(N^2) behavior.)
For implementation reasons multiple object types can appear in the
input list, and the window. PackWriter commonly passes both trees and
blobs in the input list handed to the DeltaWindow algorithm. The pack
file format requires an object to only delta compress against the same
type, so the DeltaWindow algorithm must stop doing comparisions if a
blob would be compared to a tree.
Because the input list is sorted by object type and the window is
recently considered prior objects, once a wrong type is discovered in
the window the search algorithm stops and uses the current result.
Unfortunately the termination condition was discarding any found
delta by setting deltaBase and deltaBuf to null when it was trying
to break the window search.
When this bug occurs, the state of the DeltaWindow looks like this:
current
|
\ /
input list: tree0 tree1 blob1 blob2
window: blob1 tree1 tree0
/ \
|
res.prev
As the loop iterates to the right across the window, it first finds
that blob1 is a suitable delta base for blob2, and temporarily holds
this in the bestDelta/deltaBuf fields. It then considers tree1, but
tree1 has the wrong type (blob != tree), so the window loop must give
up and fall through the remaining code.
Moving the condition up and discarding the window contents allows
the bestDelta/deltaBuf to be kept, letting the final file delta
compress blob1 against blob0.
The impact of this bug (and its fix) on real world repositories is
likely minimal. The boundary from blob to tree happens approximately
once in the search, as the input list is sorted by type. Only the
first window size worth of blobs (e.g. 10 or 250) were failing to
produce a delta in the final file.
This bug fix does produce significantly different results for small
test repositories created in the unit test suite, such as when a pack
may contains 6 objects (2 commits, 2 trees, 2 blobs). Packing test
cases can now better sample different output pack file sizes depending
on delta compression and object reuse flags in PackConfig.
Change-Id: Ibec09398d0305d4dbc0c66fce1daaf38eb71148f
Disabling the garbage pack coalescing when garbageTtl > 0 can result in
lot of garbage packs if they are created within the garbageTtl time.
To avoid a large number of garbage packs, re-introducing garbage pack
coalescing for the packs that are created within a single calendar day
when the garbageTtl is more than one day or one third of the garbageTtl.
Change-Id: If969716aeb55fb4fd0ff71d75f41a07638cd5a69
Signed-off-by: Thirumala Reddy Mutchukota <thirumala@google.com>
In order to limit the number of directories we check for emptiness only
consider fanout directories which contained unreferenced loose objects
we deleted in the same gc run.
Change-Id: Idf8d512867ee1c8ed40bd55752122ce83a98ffa2
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Cover the case where the exception is wrapped up as a
cause, e.g., PackIndex#open(File).
Change-Id: I0df5b1e9c2ff886bdd84dee3658b6a50866699d1
Signed-off-by: Hongkai Liu <hongkai.liu@ericsson.com>
Sometimes, it is necessary to cancel a garbage collection operation.
When GC is called using the standalone executable, i.e., from a command
line, Control-Cing the process does the trick. When calling GC
programmatically, though, there is no mechanism to do it.
Add checks in the GC process so that a custom cancellable progress
monitor could be passed in order to cancel the operation at specific
points. In this case, the calling process set the cancel flag in the
progress monitor and the GC process will throw an exception that can
be caught and handled by the caller accordingly.
Change-Id: Ieaecf3dbdf244539ec734939c065735f6785aacf
Signed-off-by: Hector Caballero <hector.caballero@ericsson.com>
An orphan file is either a bitmap or an idx file in pack folder,
and its corresponding pack file is missing.
Change-Id: I3c4cb1f7aa99dd7b398bdb8d513f528d7761edff
Signed-off-by: Hongkai Liu <hongkai.liu@ericsson.com>
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Using try-with-resource means that close() will automatically be
called on the Repository object. However, according to the javadoc
of Git#close():
If the repository was opened by a static factory method in this class,
then this method calls Repository#close() on the underlying repository
instance.
This means that Repository#close() is called twice, by Git.close()
and in the outer try-with-resource, leading to a corrupt use count.
Change-Id: I37ba517eb2cc67d1cd36813598772c70208d0bc9
Signed-off-by: David Pursehouse <david.pursehouse@gmail.com>
Otherwise these methods may produce unexpected results if used for
strings that are intended to be interpreted locale independently.
Examples are programming language identifiers, protocol keys, and HTML
tags. For instance, "TITLE".toLowerCase() in a Turkish locale returns
"t\u0131tle", where '\u0131' is the LATIN SMALL LETTER DOTLESS I
character.
See
https://docs.oracle.com/javase/8/docs/api/java/lang/String.html#toLowerCase--http://blog.thetaphi.de/2012/07/default-locales-default-charsets-and.html
Bug: 511238
Change-Id: Id8d8f37d84d62239c918b81f8d883ed798d87656
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Logging the repository name makes it easier to track down what is
incorrectly closing a repository.
Change-Id: I42a8bdf766c0e67f100adbf76d9616584e367ac2
Signed-off-by: David Pursehouse <david.pursehouse@gmail.com>
The Compacter and Garbage Collector will record the estimated size of
the newly going to be created compact, gc or garbage packs. This
information can be used by the clients to better make a call on how to
actually store the pack based on the approximated expected size.
Added a new protected method DfsObjDatabase.newPack(PackSource
packSource, long estimatedPackSize), so that the clients can override
this method to make use of the estimatedPackSize while creating a new
PackDescription object. The default implementation of this method is
equivalent to
newPack(packSource).setEstimatedPackSize(estimatedPackSize). I didn't
make it abstract because that would force all the existing sub classes
of DfsObjDatabase to implement this method. Due to this default
implementation, the estimatedPackSize is added to DfsPackDescription
using a setter instead of a constructor parameter (even though
constructor parameter would be a better choice as this value is set only
during the object creation).
Change-Id: Iade1122633ea774c2e842178a6a6cbb4a57b598b
Signed-off-by: Thirumala Reddy Mutchukota <thirumala@google.com>
Adds the param information to the private method. These are generated
via tooltip to resolve the compile errors.
Bug: 511043
Change-Id: I9ba551978eab750326d1a067b296e3ae93925871
Signed-off-by: Lars Vogel <Lars.Vogel@vogella.com>
These packages don't use @since tags because they are not part of the
stable public API. Some @since tags snuck in, though. Remove them to
make the convention easier to find for new contributors and the
expectations clearer for users.
Change-Id: I6c17d3cfc93657f1b33cf5c5708f2b1c712b0d31
An unreferenced object might appear in a pack. This could only happen
because it was previously referenced, and then later that reference
was removed. When we gc, we copy the referenced objects into a new
pack, and delete the old pack. This would remove the unreferenced
object. Now we first create a loose object from any unreferenced
object in the doomed pack. This kicks off the two-week grace period
for that object, after which it will be collected if it's not
referenced.
This matches the behavior of regular git.
Change-Id: I59539aca1d0d83622c41aa9bfbdd72fa868ee9fb
Signed-off-by: David Turner <dturner@twosigma.com>
Signed-off-by: Jonathan Nieder <jrn@google.com>
Andrey Loskutov
David Pursehouse
Matthias Sohn
Thomas Wolf
Shawn Pearce
Magnus Vigerlöf
Naoki Takezoe
David Turner
Jonathan Nieder
Zhen Chen
Thirumala Reddy Mutchukota
Bo Zhang
Hongkai Liu
Hector Caballero
Lars Vogel