reset() was broken and probably only worked when the position was
at the beginning. More serious was that back() sometimes descended
into the tree rather than skipping backward at the same level. Sometimes
this would result in false conflicts, but one could suspect silent
errors too. back() is called by the NamingConflictTreeWalk when looking
for directory/file conflicts.
Also added toString to DirCacheTree to simplify debugging.
Bug: 396127
Change-Id: Iaa1b4e20e623d84c2e5ac26748f42e991080dbcd
Also extend documentation and add examples.
Bug: 395599
Change-Id: Id1ddbc9da787472f82e58834092bc073224b262b
Signed-off-by: Chris Aniszczyk <zx@twitter.com>
StartGenerator now processes .git/shallow to have the
RevWalk stop for shallow commits.
See RevWalkShallowTest for tests.
Bug: 394543
CQ: 6908
Change-Id: Ia5af1dab3fe9c7888f44eeecab1e1bcf2e8e48fe
Signed-off-by: Chris Aniszczyk <zx@twitter.com>
The 'edit' command allows you to change arbitrary commit
content and the message of any commit in the repository.
Bug: 394577
Change-Id: I43a44782cdb10b29f13784fa75ab37fe5d4da01b
Signed-off-by: Dariusz Luksza <dariusz@luksza.org>
Signed-off-by: Chris Aniszczyk <zx@twitter.com>
'reword' command is used to change commit message of any
commit in git history.
Bug: 394575
Change-Id: Ic974e76dfd923fd6f0cb8f07d1a6fbecd9abbf31
Signed-off-by: Dariusz Luksza <dariusz@luksza.org>
Signed-off-by: Chris Aniszczyk <zx@twitter.com>
This adds the possibility to:
* retrieve untracked directories from the status
* instruct the CleanCommand to clean those directories.
* retrieve ignored paths from the status
* instruct the CleanCommand to leave those ignored paths alone
Bug: 338717
Change-Id: Ibed0459005a5e306c010b9932f5b5fd107fb5448
Signed-off-by: Chris Aniszczyk <zx@twitter.com>
The checkoutPaths body is split into two implementations, depending on
whether we are checking out the index or a branch. This improves
readability, as in the index case we now also need to have access to
DirCacheIterator.
Bug: 390147
Change-Id: I99fd599b25b2ace9bdd84535a56565286a3cb7f1
Signed-off-by: Chris Aniszczyk <zx@twitter.com>
Note the the settings are slightly less restrictive for test bundles.
-Also cleanup a couple of malformed javadocs
-Update compiler warnings/errors to include default values from Juno
-We now flag diagnosed null dereference as error. We didn't do that
earlier because of some false positives.
Change-Id: I58386d63164e65d3d8d1998da3390d99bdc7381a
Signed-off-by: Chris Aniszczyk <zx@twitter.com>
This behavior was defined in the Javadoc of PathEdit, but not actually
implemented.
It's necessary when one wants to use a PathEdit to check out a specific
stage in apply.
Bug: 390147
Change-Id: Iaed5cf60c554fc17e6c4d188caf4f0231da920d0
Signed-off-by: Chris Aniszczyk <zx@twitter.com>
With bug 391855, PathEdit will be changed to apply an edit for each
stage. With that, CommitCommand would no longer work correctly when
committing an unmerged path.
This changes it to use a DirCacheBuilder which allows us to correctly
replace the entries for the three stages with one, which is not possible
with PathEdit.
Bug: 391859
Change-Id: I6dc180aec7e2cbf8d1e91f50482c95bc420f79de
Add a test for reflog with an amend commit and add assertions for
branch comments
Change-Id: Ie44076ff1abf1f8954b85d8c74ac6cb41ab789cb
Signed-off-by: Chris Aniszczyk <zx@twitter.com>
With bug 391855, DirCacheEditor's PathEdit will be applied for each
stage. For an unmerged path, this would result in 3 equal entries for
the same path.
By using a DirCacheBuilder, the code is simpler and does not have the
above problem with unmerged paths.
Bug: 391860
Change-Id: I785deeaeb8474f8c7a7fbc9ef00d3131fac87e41
Signed-off-by: Chris Aniszczyk <zx@twitter.com>
The previous implementation used a PathEdit, which does not reset the
stage of the entry.
Bug: 391860
Change-Id: If26d3a35abfee85424ad69de724f06a28b6e9efb
Signed-off-by: Chris Aniszczyk <zx@twitter.com>
For streams that should not be closed, i.e. don't own an underlying
stream, and in-memory streams that do not need to be closed we just
suppress the warning. This mostly apply to test cases. GC is enough.
For streams with external resources (i.e. files) we add the necessary
call to close().
Change-Id: I4d883ba2e7d07f199fe57ccb3459ece00441a570
By making use of JUnit Theories and Datapoints ResolveMergerTests is now
capable to run the tests against multiple Merge strategies.
Change-Id: Ifa0075e0a2aca7576ef268291b73fa2f4d79b591
toExternalString, equals and hashCode don't expect them to be null, so
explicitly disallow it in the constructor.
Also fix the documentation of setAuthor and setCommitter in
CommitCommand when specifying name and email as separate arguments.
Bug: 352984
Change-Id: I0ac994ae8e47789d38f7c6e6db55d482f0f1bac3
In Iff768422c the offset used for the content id was fixed to use the
offset that applied to the dircache iterator. Unfortunately the index
for the dircache content id offset stuck for entries that were not in
the index. Few caller probably cared about that, unless it actually
caused an ArrayIndexOutOfBoundsException.
Change-Id: Ic9f0e77c8ea3a0770d88565e94392e76853e3006
Add more time to a timestamp to safely go beyond the granularity of
the timestamp resolution of the file system. The lowest resolution we
know of is FAT with two second resolution. Then add some to make sure we
are above the limit.
Change-Id: I85c5b07dcdf2d80de41fe9b2354ccc888bad7f1e
Valid refs are defined by git-check-ref-format(1). In addition
we will not try to perform a lookup of an invalid ref name in
Repository.resolve().
Reported by R Shapiro in the Eclipse JGit Forum.
Change-Id: I0b098eec9ecb98a9ce16b1cfb476729aaf2fb190
Without this check, the checkout was done but the result was a "both
deleted" status when inspecting it with C Git.
Found this while working on bug 390147.
Change-Id: Ic3693f2c651827239e838bf7f37da842a7ae9707
Invoke the wrapper types' valueOf via static imports.
For booleans used in asserts, add a new assert in
the JUnit utility package since out current version of JUnit
does not have the assert(boolean, boolean) method.
Change-Id: I9099bd8efbc8c133479344d51ce7dabed8958a2b
Some GC tests were sporadically failing. The reason was that they used
the setExpireAgeMillis method to define object expiration before
invoking the prune method. Depending on the CPU load during the test
run, the prune method may reach an object (which is considered
non-expired by the test) too late and actually prune it.
To make the test stable we now use the setExpire(Date expire) method and
define a time instant before which objects are considered to be expired.
This way the outcome of the prune method doesn't depend on the CPU load.
Change-Id: Ifc3323ca55ae56dbccdbc90a282ec3cf18ad7297
Signed-off-by: Sasa Zivkov <sasa.zivkov@sap.com>
resolve("foo~X") where X is greater than the distance from foo to the
root should return null, but 2a2362fb introduced a bug causing it to
either return resolve("foo") or NPE. Add a test for the correct
behavior.
Also add an analogous test for foo^X where X is greater than the
number of parents (which was not broken by that commit).
Change-Id: Ic580081ece57c8c2df29b652897b425ecb34e11f
For configuration parameter like "gc.pruneexpire" we need to understand
the value "never". Never is handled as a date so far into the future
that it will never happen. The actual value currently used is the
constant GitDateParser.NEVER.
Change-Id: I7744eaee9bf5026da517151c212c88325c348d6c
Signed-off-by: Robin Rosenberg <robin.rosenberg@dewire.com>
Instead of just returning null when something was not parseable we
should throw a real ParseException. This allows us to distinguish
between specifications which are unparseable and those which represent
no date (e.g. "never")
Change-Id: Ib3c1aa64b65ed0e0270791a365f2fa72ab78a3f4
Change-Id: Id5b578f7040c6c896ab9386a6b5ed62b0f495ed5
Signed-off-by: Sasa Zivkov <sasa.zivkov@sap.com>
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Change-Id: Id3ab5f56f88d7e9636c71b30258c268a75fc422e
Signed-off-by: Robin Stocker <robin@nibor.org>
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
When a file is not in the index and neither contents nor mode differ
between "head" and "merge", the index state should be kept. If they
differ, a checkout conflict should occur. This is described in Git's
git-read-tree.txt.
JGit used to replace the index state with "merge" in both of the above
cases.
A confusing effect of this was that when one removed a file and then did
a rebase, the file silently reappeared again.
The changes to dir/file conflict handling are a consequence of this
change, as the index handling change made tests in DirCacheCheckoutTest
break. I compared these cases to C Git and the new behavior there also
matches what C Git does.
Bug: 387390
Change-Id: I5beb781f12172a68f98c67d4c8029eb51ceae62d
Signed-off-by: Robin Stocker <robin@nibor.org>
Matthias Sohn
Robin Rosenberg
Robin Stocker
Marc Strapetz
Dariusz Luksza
Mikael Karlsson
Markus Duft
Tomasz Zarna
Christian Halstrick
Sasa Zivkov
Dave Borowitz