Canonical git shows the zero-Id for lines without commit, and
uses the current time stamp for such lines.
Also consider lines without commit when calculating the field
widths.
Change-Id: If0bee9b3e7f90861ad0f387f68e52ecc4a53dfd7
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
When a conflicting file was blamed, JGit would not identify lines
coming from the merge parents. The main cause for this was that
Blame and BlameCommand simply added the first DirCacheEntry found
for a file to its queue of candidates (blobs or commits) to consider.
In case of a conflict this typically is the merge base commit, and
comparing a auto-merged contents against that base would yield
incorrect results.
Such cases have to be handled specially. The candidate to be
considered by the blame must use the working tree contents, but
at the same time behave like a merge commit/candidate with HEAD
and the MERGE_HEADs as parents. Canonical git does something very
similar, see [1].
Implement that and add tests.
I first did this for the JGit pgm Blame command. When I then tried
to do the same in BlameCommand, I noticed that the latter also
included some fancy but incomplete CR-LF handling. In order to
be able to use the new BlameGenerator.prepareHead() also in
BlameCommand this CR-LF handling was also moved into BlameGenerator
and corrected in doing so.
(Just considering the git config settings was not good enough,
CR-LF behavior can also be influenced by .gitattributes, and even
by whether the file in the index has CR-LF. To correctly determine
CR-LF handling for check-in one needs to do a TreeWalk with at
least a FileTreeIterator and a DirCacheIterator.)
[1] https://github.com/git/git/blob/v2.22.0/blame.c#L174
Bug: 434330
Change-Id: I9d763dd6ba478b0b6ebf9456049d6301f478ef7c
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
Make the command die with proper messages when the revision
cannot be resolved or the file doesn't exist in the repository.
Previously the command would throw NPEs in these cases.
Bug: 490798
Change-Id: Ia457347aa22cf6bd2c2b6e7b9d705a66b3826307
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
FS#getFileStoreAttributes used the real userConfig and not the mocked
one. This led to test errors when running tests with Bazel since it
sandboxes tests which prevents they can write to ~/.gitconfig.
Fix this by first preparing the MockedSystemReader and the mocked config
before calling FS#getFileStoreAttributes.
Also fix ConfigTest which broke due to this change since it inherits
from LocalDiskRepositoryTestCase and calls its setup method which was
changed here. We can no longer assert by comparing plain text since FS
adds FileStoreAttributes to the mocked userConfig. Also the default
options seen by this test changed since we now use a mocked config.
Change-Id: I76bc7c94953fe979266147d3b309a68dda9d4dfe
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
The JGit pgm tests parse the command line internally using Linux
semantics, treating '\' as an escape. File paths therefore must
be quoted, otherwise Windows paths are destroyed. See the
attachment[1] on bug 548598.
[1] https://bugs.eclipse.org/bugs/attachment.cgi?id=279387
Bug: 544326
Change-Id: If42e29c8e808b0983fba2843a34c3ea3dd0e9246
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
CheckoutCommand had a setForce() method. But this didn't correspond
to native git's 'git checkout -f' option. Deprecate the old setForce()
method and move its implementation to a new method setForceRefUpdate()
and use it to implement the -B option in the CLI class Checkout.
Add a setForced() method and use it to fix the associated '-f' option of
the CLI Checkout class to behave like native git's 'git checkout -f'
which overwrites dirty worktree files during checkout.
This is still not fully matching native git's behavior: updating
additionally dirty index entries is not done yet.
Bug: 530771
Change-Id: I776b78eb623b6ea0aca42f681788f2e4b1667f15
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Implement the basic functionality and support the option --help (-h).
Change-Id: Ibcdf0c958d0f93b7415d4e591b1455ccba5d95f7
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
On recent VMs, collection.toArray(new T[0]) is faster than
collection.toArray(new T[collection.size()]). Since it is also more
readable, it should now be the preferred way of collection to array
conversion.
https://shipilev.net/blog/2016/arrays-wisdom-ancients/
Change-Id: I80388532fb4b2b0663ee1fe8baa94f5df55c8442
Signed-off-by: Michael Keppler <Michael.Keppler@gmx.de>
Callers should use getRefDatabase().getRefsByPrefix(R_TAGS) instead.
Adjust the tests accordingly.
Bug: 534731
Change-Id: Ib28ae365e42720268996ff46e34cae1745ad545c
Signed-off-by: David Pursehouse <david.pursehouse@gmail.com>
Replace hard-coded "UTF-8" string with the constant.
Change-Id: Ie812add2df28e984090563ec7c6e2c0366616424
Signed-off-by: David Pursehouse <david.pursehouse@gmail.com>
Checkout sometimes throws an exception, and
other times it writes an error message to outw
and returns normally, even though the command
failed. This commit now reports all failures
through a die() exception.
Change-Id: I038a5d976d95020fea3faac68e9178f923c25b28
Signed-off-by: Ned Twigg <ned.twigg@diffplug.com>
Added a public method to TextBuiltin which makes it possible for
clients to initialize all of its state, including output and error
streams. This gives clients the ability to customize the way in
which a command is run.
Change-Id: If718236964d2c5cf869e120c74f1a12965f4812e
Signed-off-by: Ned Twigg <ned.twigg@diffplug.com>
The multiValued attribute on @Option was removed. When the field is a
List, it's not actually needed (even with earlier versions of args4j),
see RmTest. In other cases, we have a custom handler, where it's also
not needed.
Bug: 413163
Change-Id: I4bb951e9fab5f4ae4271bd7e11be799dc234ab80
This adds --match option for glob(7) matchers on git tags to jgit
describe in CLI.
Bug: 518377
Change-Id: I745988d565dd4391e8b3e5a91bbfbae575333819
Signed-off-by: Oliver Lockwood <oliver.lockwood@cantab.net>
The cgit archive command creates a prefix (root) directory entry
in the archive file. That entry's time is set to the commit time.
This patch makes jgit's behavior consistent with with cgit:
prefix: hoge/ -> creates prefix directory "hoge/" entry.
prefix: hoge//// -> creates prefix directory "hoge/" entry.
prefix: hoge/foo -> does not create prefix directory entry, but for
each file/directory entry, prefix is added.
Change-Id: I2610e40ce37972c5f7456fdca6337e7fb07176e5
Signed-off-by: Yasuhiro Takagi <ytakagi@bea.hi-ho.ne.jp>
When running an automatic GC on a FileRepository, when the caller
passes a NullProgressMonitor, run the GC in a background thread. Use a
thread pool of size 1 to limit the number of background threads spawned
for background gc in the same application. In the next minor release we
can make the thread pool configurable.
In some cases, the auto GC limit is lower than the true number of
unreachable loose objects, so auto GC will run after every (e.g) fetch
operation. This leads to the appearance of poor fetch performance.
Since these GCs will never make progress (until either the objects
become referenced, or the two week timeout expires), blocking on them
simply reduces throughput.
In the event that an auto GC would make progress, it's still OK if it
runs in the background. The progress will still happen.
This matches the behavior of regular git.
Git (and now jgit) uses the lock file for gc.log to prevent simultaneous
runs of background gc. Further, it writes errors to gc.log, and won't
run background gc if that file is present and recent. If gc.log is too
old (according to the config gc.logexpiry), it will be ignored.
Change-Id: I3870cadb4a0a6763feff252e6eaef99f4aa8d0df
Signed-off-by: David Turner <dturner@twosigma.com>
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Since the introduction of generic type parameter inference in Java 7,
it's not necessary to explicitly specify the type of generic parameters.
Enable the warning in Eclipse, and fix all occurrences.
Change-Id: I9158caf1beca5e4980b6240ac401f3868520aad0
Signed-off-by: David Pursehouse <david.pursehouse@gmail.com>
Set missingOverrideAnnotation=warning in Eclipse compiler preferences
which enables the warning:
The method <method> of type <type> should be tagged with @Override
since it actually overrides a superclass method
Justification for this warning is described in:
http://stackoverflow.com/a/94411/381622
Enabling this causes in excess of 1000 warnings across the entire
code-base. They are very easy to fix automatically with Eclipse's
"Quick Fix" tool.
Fix all of them except 2 which cause compilation failure when the
project is built with mvn; add TODO comments on those for further
investigation.
Change-Id: I5772061041fd361fe93137fd8b0ad356e748a29c
Signed-off-by: David Pursehouse <david.pursehouse@gmail.com>
Change-Id: Ie1e59c566b63d0dfac231e44e7ebd7f3f08f3e9f
Signed-off-by: Ned Twigg <ned.twigg@diffplug.com>
Signed-off-by: David Pursehouse <david.pursehouse@gmail.com>
According to FindBugs:
In each iteration, the String is converted to a StringBuffer/
StringBuilder, appended to, and converted back to a String. This
can lead to a cost quadratic in the number of iterations, as the
growing string is recopied in each iteration.
Replace string concatenation with StringBuffer.
Change-Id: I60e09f274bed6722f4e0e4d096b0f2b1b31ec1b4
Signed-off-by: David Pursehouse <david.pursehouse@gmail.com>
Native git (as many other tools) interprets the environment variables
http_proxy, HTTP_PROXY, ... in a specific way. "http_proxy" has to be
lowercase while "https_proxy" can be lowercase or uppercase (means:
"HTTPS_PROXY"). Lowercase has precedence. This can be looked up in
"ENVIRONMENT" section of [1]. Teach JGit CLI to behave similar.
Additionally teach JGit not to interpret the environment variables if
the java process was explicitly started with the system properties
telling JVM which proxy to use. A call like "http_proxy=proxy1 java
-Dhttp.proxyHost=proxy2 ..." should use proxy2 as proxy.
[1] https://curl.haxx.se/docs/manpage.html
Change-Id: I2ad78f209792bf8f1285cf2f8ada8ae0c28f8e5a
Change-Id: I438456b76aefd361384729686271288186d3be3b
Signed-off-by: Ned Twigg <ned.twigg@diffplug.com>
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Problem occurs when the checkout wants to create a file 'd/f' but
the workingtree contains a dirty file 'd'. In order to create d/f the
file 'd' would have to be deleted and since the file is dirty that
content would be lost. This should lead to a CheckoutConflictException
for d/f when failOnConflict was set to true.
This fix also changes jgit checkout semantics to be more like native
gits checkout semantics. If during a checkout jgit wants to delete a
folder but finds that the working tree contains a dirty file at this
path then JGit will now throw an exception instead of silently keeping
the dirty file. Like in this example:
git init
touch b
git add b
git commit -m addB
mkdir a
touch a/c
git add a/c
git commit -m addAC
rm -fr a
touch a
git checkout HEAD~
Change-Id: I9089123179e09dd565285d50b0caa308d290cccd
Signed-off-by: Rüdiger Herrmann <ruediger.herrmann@gmx.de>
Also-by: Rüdiger Herrmann <ruediger.herrmann@gmx.de>
With this change it is possible to initialize repositories with
'git init /path/to/new/repo'
Change-Id: Ia9b288b4fb34887e8f5e2f3f270e521c44d41b6a
Signed-off-by: Rüdiger Herrmann <ruediger.herrmann@gmx.de>
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Allocate a new Git for each part of the test, rather than
reassigning to the same variable.
Change-Id: Ic83778bbff0b2f57d37b95aef70324859d42cd58
Signed-off-by: David Pursehouse <david.pursehouse@sonymobile.com>
Currently execution of tests in pgm uses CLIGitCommand which
re-implements few things from Main. Unfortunately this can results in a
different test behavior compared to the real CLI runtime.
The change let CLIGitCommand extend Main and only slightly modifies the
runtime (stream redirection and undesired exit() termination).
Change-Id: I87b7b61d1c84a89e5917610d84409f01be90b70b
Signed-off-by: Andrey Loskutov <loskutov@gmx.de>
git branch -d -h reports an error (because of missing -d option value)
but does not print the help as expected.
To fix this, CmdLineParser must catch, print but do not propagate
exceptions if help is requested.
Bug: 484951
Change-Id: I51265ebe295f22da540792c6a1980b8bdb295a02
Signed-off-by: Andrey Loskutov <loskutov@gmx.de>
In different places (Main, TextBuiltin, CLIGitCommand) we report fatal
errors and at same time want to check for fatal errors in the tests.
Using common API simplifies the error testing and helps to navigate to
the actual error check implementation.
Change-Id: Iecde79beb33ea595171f168f46b0b10ab2f339bb
Signed-off-by: Andrey Loskutov <loskutov@gmx.de>
Thomas Wolf
Matthias Sohn
David Pursehouse
Carsten Hammer
Christian Halstrick
Michael Keppler
Han-Wen Nienhuys
Ned Twigg
Robin Stocker
Oliver Lockwood
Yasuhiro Takagi
David Turner
Rüdiger Herrmann
Hugo Arès
David Pursehouse
Andrey Loskutov