Implement support for Git protocol v2's "ls-refs" command and its
"symrefs" and "peel" parameters.
This adds support for this command to UploadPack but the git://,
ssh://, and git:// transports do not make use of it yet. That will
have to wait for later patches.
Change-Id: I8abc6bcc6ed4a88c165677ff1245625aca01267b
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Jonathan Nieder <jrn@google.com>
Add initial support for protocol v2 of the fetch-pack/upload-pack
protocol. This protocol is described in the Git project in
"Documentation/technical/protocol-v2.txt".
This patch adds support for protocol v2 (without any capabilities) to
UploadPack. Adaptations of callers to make use of this support will
come in subsequent patches.
[jn: split from a larger patch; tweaked the API to make UploadPack
handle parsing the extra parameters and config instead of requiring
each caller to do such parsing]
Change-Id: I79399fa0dce533fdc8c1dbb6756748818cee45b0
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Jonathan Nieder <jrn@google.com>
Most pkt-lines (data-pkts) have the form
pkt-len pkt-payload
where pkt-len is a string of 4 hexadecimal digits representing the
size in bytes of the pkt-line. Since this size includes the size of
the pkt-len, no data-pkt has a length less than 4.
A pkt-line with a length field less than 4 can thus be used for
other purposes. In Git protocol v1, the only such pkt-line was
flush-pkt = "0000"
which was used to mark the end of a stream. Protocol v2 (see
Documentation/technical/protocol-v2.txt in git.git) introduces a
second special pkt-line type:
delim-pkt = "0001"
used to mark the end of a section within a stream, for example to
separate capabilities from the content of a command.
[jn: split out from a larger patch that made use of this support]
Change-Id: I10e7824fa24ed74c4f45624bd490bba978cf5c34
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Jonathan Nieder <jrn@google.com>
The existing RefDatabase#getRefs abstract method (to be implemented by
ref database backends) has the following issues:
- It returns a map with a key (the name of the ref with the prefix
removed) which is potentially superfluous (it can be derived by the
caller if need be) and confusing (in that the prefix is removed).
- The prefix is required to end with a '/', but some backends (e.g.
reftable) have fast search by prefix regardless of what the last
character of the prefix is.
Add a new method #getRefsByPrefix that does not have these issues. This
is non-abstract with a default implementation that uses #getRefs (for
backwards compatibility), but ref database backends can reimplement it.
This also prepares for supporting "ref-prefix" in the "ls-refs" command
in the fetch-pack/upload-pack protocol v2, which does not require that
the prefix end with a '/'.
Change-Id: I4c92f852e8c1558095dd460b5fd7b602c1d82df1
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Jonathan Nieder <jrn@google.com>
Otherwise successful, non-conflicting merges will never get a
Gerrit Change-Id.
Bug: 358206
Change-Id: I9b599ad01d9f7332200c1d81a1ba6ce5ef990ab5
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
Various places on the client side of the push were creating unordered
maps and sets of ref names, resulting in ReceivePack processing commands
in an order other than what the client provided. This is normally not
problematic for clients, who don't typically care about the order in
which ref updates are applied to the storage layer.
However, it does make it difficult to write deterministic tests of
ReceivePack or hooks whose output depends on the order in which commands
are processed, for example if informational per-ref messages are written
to a sideband.[1]
Add a test that ensures the ordering of commands both internally in
ReceivePack and in the output PushResult.
[1] Real-world example:
https://gerrit-review.googlesource.com/c/gerrit/+/171871/1/javatests/com/google/gerrit/acceptance/git/PushPermissionsIT.java#149
Change-Id: I7f1254b4ebf202d4dcfc8e59d7120427542d0d9e
Previously @ was allowed e.g. in branch names, but not as the last
character. The case that @ is the last character was not handled.
Change-Id: Ic33870b22236f7a5ec7b54007f1b0cefd9354bfb
Getting attributes of files on Windows is an expensive operation.
Windows stores file attributes in the directory, so they are
basically available "for free" when a directory is listed. The
implementation of Java's Files.walkFileTree() takes advantage of
that (at least in the OpenJDK implementation for Windows) and
provides the attributes from the directory to a FileVisitor.
Using Files.walkFileTree() with a maximum depth of 1 is thus a
good approach on Windows to get both the file names and the
attributes in one go.
In my tests, this gives a significant speed-up of FileTreeIterator
over the "normal" way: using File.listFiles() and then reading the
attributes of each file individually. The speed-up is hard to
quantify exactly, but in my tests I've observed consistently 30-40%
for staging 500 files one after another, each individually, and up
to 50% for individual TreeWalks with a FileTreeIterator.
On Unix, this technique is detrimental. Unix stores file attributes
differently, and getting attributes of individual files is not costly.
On Unix, the old way of doing a listFiles() and getting individual
attributes (both native operations) is about three times faster than
using walkFileTree, which is implemented in Java.
Therefore, move the operation to FS/FS_Win32 and call it from
FileTreeIterator, so that we can have different implementations
depending on the file system.
A little performance test program is included as a JUnit test (to be
run manually).
While this does speed up things on Windows, it doesn't solve the basic
problem of bug 532300: the iterator always gets the full directory
listing and the attributes of all files, and the more files there are
the longer that takes.
Bug: 532300
Change-Id: Ic5facb871c725256c2324b0d97b95e6efc33282a
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
The class names imply that RecursiveMergerTest tests the RecursiveMerger
and ResolveMergerTest tests the ResolveMerger.
In fact, both of them include coverage of both strategies; the difference
is that RecursiveMergerTest is only testing criss-cross merges.
The tests cannot be combined into a single class because the criss-cross
test methods have additional data points.
Instead, rename the classes to more meaningful names.
Change-Id: I7ca8a03a3b7e351e2d4fcaca3b3186c098a3ca66
Signed-off-by: David Pursehouse <david.pursehouse@gmail.com>
Define strategiesUnderTest as an array of MergeStrategy using the
@DataPoints annotation, rather than two separate variables each
annotated as @DataPoint.
This makes the implementation consistent with RecursiveMergerTest.
Change-Id: I9f1d525b38cb59634ba054c7779dc4af1fc46e25
Signed-off-by: David Pursehouse <david.pursehouse@gmail.com>
The local variable 'remote' hides the class scope variable
of the same name.
Change-Id: I7410c33678677ce2a14691772466d91e8139e3fa
Signed-off-by: David Pursehouse <david.pursehouse@gmail.com>
Teach UploadPack to advertise the filter capability and support a
"filter" line in the request, accepting blob sizes only, if the
configuration variable "uploadpack.allowfilter" is true. This feature is
currently in the "master" branch of Git, and as of the time of writing,
this feature is to be released in Git 2.17.
This is incomplete in that the filter-by-sparse-specification feature
also supported by Git is not included in this patch.
If a JGit server were to be patched with this commit, and a repository
on that server configured with RequestPolicy.ANY or
RequestPolicy.REACHABLE_COMMIT_TIP, a Git client built from the "master"
branch would be able to perform a partial clone.
Change-Id: If72b4b422c06ab432137e9e5272d353b14b73259
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
The implementation of ObjectIdSerializer, added in change I7599cf8bd,
is not equivalent to the original implementation in Gerrit [1].
The Gerrit implementation provides separate methods to (de)serialize
instances of ObjectId that are known to be non-null. In these methods,
no "marker" is written to the stream. Replacing Gerrit's implementation
with ObjectIdSerializer [2] broke persistent caches because it started
writing markers where they were not expected [3].
Since ObjectIdSerializer is included in JGit 4.11 we can't change the
existing #write and #read methods. Keep those as-is, but extend the
Javadoc to clarify that they support possibly null ObjectId instances.
Add new methods #writeWithoutMarker and #readWithoutMarker to support
the cases where the ObjectId is known to be non-null and the marker
should not be written to the serialization stream.
Also:
- Replace the hard-coded `0` and `1` markers with constants that can
be linked from the Javadocs.
- Include the marker value in the "Invalid flag before ObjectId"
exception message.
[1] https://gerrit-review.googlesource.com/c/gerrit/+/9792
[2] https://gerrit-review.googlesource.com/c/gerrit/+/165851
[3] https://gerrit-review.googlesource.com/c/gerrit/+/165952
Change-Id: Iaf84c3ec32ecf83efffb306fdb4940cc85740f3f
Signed-off-by: David Pursehouse <david.pursehouse@gmail.com>
In most of the tests, the temporary buffer is explicitly destroyed in
a finally block after being closed. This is not possible if using the
try-with-resource construct, because the variable is not accessible in
the finally block scope.
Change-Id: I3bab30695ddd12e1a0ae107989638428fe3ef551
Signed-off-by: David Pursehouse <david.pursehouse@gmail.com>
When an auto-closeable resources is not opened in try-with-resource,
the warning "should be managed by try-with-resource" is emitted by
Eclipse.
Fix the ones that can be silenced simply by moving the declaration of
the variable into a try-with-resource.
In cases where we explicitly call the close() method, for example in
tests where we are testing specific behavior caused by the close(),
suppress the warning.
Leave the ones that will require more significant refcactoring to fix.
They can be done in separate commits that can be reviewed and tested
in isolation.
Change-Id: I9682cd20fb15167d3c7f9027cecdc82bc50b83c4
Signed-off-by: David Pursehouse <david.pursehouse@gmail.com>
Parameter negateFirstMatch is not honored anymore
Change-Id: Idff1a92643c1431c7e34a7730f8414135e1ac196
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
The WorkingTreeSource produced an ObjectLoader that returned
inconsistent sizes: the file size in getSize(), but then a
correctly filtered smaller stream in openStream(). This resulted
either in an IOE "short read of block" or in an EOFException
depending on the resulting filtered size.
Fix this by ensuring that getSize() does return the size of the
filtered stream.
Bug: 530106
Change-Id: I7c7c85036047dc10030ed29c1d5a6c7f34f2bdff
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
Replace hard-coded "UTF-8" string with the constant.
Change-Id: Ie812add2df28e984090563ec7c6e2c0366616424
Signed-off-by: David Pursehouse <david.pursehouse@gmail.com>
Jonathan Tan
Thomas Wolf
Dave Borowitz
Christian Halstrick
David Pursehouse
Matthias Sohn