When RecursiveMerger tried to determine a common base tree it was
recursively tried to merge multiple common bases. But these intermediate
merges which have just been done to determine a single common base for
the final merge already filled some important fields (toBeCheckedOut,
toBeDeleted, ...). These side effects of the intermediate merges led to
wrong results of the final merge. One symptom was that after a recursive
merge which should be succesful you could still see leftover files in
the worktree: files which existed in the (virtual) common base but which
don't exist anymore in the branches to be merged.
The solution is easy: Clear the appropriate fields after common base
determination and start the final merge with a clean state.
Change-Id: I644ea9e1cb15360f7901bc0483cdb9286308c226
Signed-off-by: Robin Rosenberg <robin.rosenberg@dewire.com>
As described in native gits file "git-read-tree.txt" git has in a
special mode when doing the "initial" checkout. "Initial" means that the
index is empty before the checkout. This was not handled correctly in
JGit and is fixed in this commit. Also see
https://github.com/git/git/blob/master/Documentation/git-read-tree.txt#L181
Change-Id: I9b9d1bd9ebf349cfca420c891c7b099a18d07ba4
Setting branch.<name>.rebase or pull.rebase to 'preserve' will preserve
merges during rebase. Also, pull.rebase is now consulted if there is no
branch-specific configuration.
Bug: 429664
Change-Id: I345fa295c7e774e0d0a8e6aba30fbfc3552e0084
Signed-off-by: Konrad Kügler <swamblumat-eclipsebugs@yahoo.de>
With --preserve-merges C Git re-does merges using the rewritten merge
parents, discarding the old merge commit. For the common use-case of
pull with rebase this is unfortunate, as it loses the merge conflict
resolution (and other fixes in the merge), which may have taken quite
some time to get right in the first place.
To overcome this we use a two-fold approach:
If any of the (non-first) merge parents of a merge were rewritten, we
also redo the merge, to include the (potential) new changes in those
commits.
If only the first parent was rewritten, i.e. we are merging a branch
that is otherwise unaffected by the rebase, we instead cherry-pick the
merge commit at hand. This is done with the --mainline 1 and --no-commit
options to apply the changes introduced by the merge. Then we set up an
appropriate MERGE_HEAD and commit the result, thus effectively forging a
merge.
Apart from the approach taken to rebase merge commits, this
implementation closely follows C Git. As a result, both Git
implementations can continue rebases of each other.
Preserving merges works for both interactive and non-interactive rebase,
but as in C Git it is easy do get undesired outcomes with interactive
rebase.
CommitCommand supports committing merges during rebase now.
Bug: 439421
Change-Id: I4cf69b9d4ec6109d130ab8e3f42fcbdac25a13b2
Signed-off-by: Konrad Kügler <swamblumat-eclipsebugs@yahoo.de>
DiffFormatter now suports either side being null and the log program
will output the diff for the first commit.
Bug: 395791
Change-Id: I378957b57e9ad1f7195ba416f402178453f0ebd3
Making the methods static would gain little in performance,
make the code harder to change. Removing unncessary warnings
is more important.
Change-Id: If3e6aa9c1d92e58b4e7a8e246cf4aace237d7a7b
These settings were added by Eclipse simply by touching
the project settings. Adding these makes it simpler to see
what local changes have been made.
Change-Id: Iab0aa62530312eb0c78b03b5c6a632742bcc4978
Connecting to an SshSession may fail due to different reasons. Jsch for
example often throws an com.jcraft.jsch.JschException: verify: false.[1]
The issue is still not fixed in JSch 0.1.51.
In such a case it is worth retrying to connect. The number of connection
attempts can be configured using ssh_config parameter
"ConnectionAttempts" [2].
Don't retry if the user canceled authentication.
[1] http://sourceforge.net/p/jsch/bugs/58/
[2] http://linux.die.net/man/5/ssh_config
Bug: 437656
Change-Id: I6dd2a3786b7d3f15f5a46821d8edac987a57e381
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
The current behavior of passing a TreeFilter to RevWalk has limited
usefulness, since the RevFilter derived from the TreeFilter is always
ANDed together with any other RevFilters. It is also tied fairly
tightly to the parent rewriting mechanism.
Make TreeRevFilter a generic RevFilter that matches modified paths
against any TreeFilter. This allows for more complex logic like
(modified this path OR authored by this person).
Leave the rewrite flag logic in this class, since it's closely tied to
the parent comparison code, but hidden behind a protected constructor.
Change-Id: Ia72ef591a99415e6f340c5f64583a49c91f1b82f
When update the manifest against a bare repository, RepoCommand will replace
every existing content from the repository with contents populated from the
manifest. Added note for that and a unit test to make sure this behavior.
Change-Id: I1d5960e84bca5aa2a4e86f424d2ddd4197894cdc
Signed-off-by: Yuxuan 'fishy' Wang <fishywang@google.com>
PackFileTest lives in o.e.j.internal.storage.file, so I think it's OK for
it to acknowledge the existence of FileRepository in order to avoid some
unnecessary casting, and probably nicer to avoid the repetition too.
Change-Id: I0de592a32f6178e6d6bf114848101e185b3111a1
Signed-off-by: Roberto Tyley <roberto.tyley@gmail.com>
Unstashed changes are saved in a commit which is added as an additional
parent to the stash commit.
This behaviour is fully compatible with C Git stashing of untracked
files.
Bug: 434411
Change-Id: I2af784deb0c2320bb57bc4fd472a8daad8674e7d
Signed-off-by: Andreas Hermann <a.v.hermann@gmail.com>
If a client passes a multiline message as argument to ReflogWriter.log()
the Reflog gets corrupted and cannot be parsed. ReflogWriter.log() is
invoked implicitly from various commands such as StashCreate, Rebase and
many more. However the message is not always filtered for line feeds.
Such an example is the StashCreateOperation of EGit which passes
unchecked user input as commit message. If a multiline comment is pasted
to the stash create dialog, the reflog gets corrupted.
ReflogWriter now replaces line endings in log message with spaces.
Bug: 435509
Change-Id: I3010cc902e13bee4d7b6696dfd11ab51062739d3
Signed-off-by: Andreas Hermann <a.v.hermann@gmail.com>
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
The aim of this change is to place all commits of a branch on the same
lane and commits of other (side) branches on different lanes.
The algorithm treats first parents of a commit specially by placing them
on the same lane as the commit itself. When a commit is the first parent
of multiple children it could be placed on any of these children's
lanes. In this case it is placed on the longest child lane, as this is
usually the lane of the branch the commit actually was made on.
Other (non-first) parents are placed on new lanes. This creates a layout
that should make it easier to see branches and merges and follow linear
branch histories.
This differs from the previous approach, which sometimes plotted the
commits of a side branch on the same lane as the base branch commits and
further commits on the base branch appeared on a different lane.
This made the base branch appear as if it was the side branch and
the side branch appears to be the base branch.
In addition to lane assignment, also the plotting code changed to start
drawing a branch lane from the commit where it forks out. Previously it
started only when the first commit on the branch appeared.
Active lanes are continued with every commit that is processed.
Previously lanes were only continued when the next commit on the lane
was encountered. This could produce (temporarily) dangling commits if
the next commit on the lane was not processed yet.
CQ: 8299
Bug: 419359
Bug: 434945
Change-Id: Ibe547aa24b5948ae264f7d0f56a492a4ef335608
Signed-off-by: Konrad Kügler <swamblumat-eclipsebugs@yahoo.de>
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Adds support for Negotiate(SPNEGO) HTTP authentication method. This method
is set to have a higher priority as Digest HTTP authentication method.
Bug: 428836
Change-Id: Ib181096d39f538df1dd7d3f36516843777bf12ae
Signed-off-by: Laurent Goujon <lgoujon@twitter.com>
Signed-off-by: Chris Aniszczyk <caniszczyk@gmail.com>
By specifying a mainline parent, a merge is cherry picked as if this
parent was its only parent. If no mainline parent is given, cherry
picking merges is not allowed, as before.
Change-Id: I391cb73bf8f49e2df61428c17b40fae8c86a8b76
Signed-off-by: Konrad Kügler <swamblumat-eclipsebugs@yahoo.de>
Adds further tests where the working tree is dirty (differs from
index) and where we have staged but uncommitted changes.
Fixed the test case 9 for file/directory conflicts.
Bug: 428819
Change-Id: Ie44a288b052abe936ebb74272d0fefef3b218a7a
Signed-off-by: Axel Richard <axel.richard@obeo.fr>
Signed-off-by: Robin Rosenberg <robin.rosenberg@dewire.com>
Signed-off-by: Christian Halstrick <christian.halstrick@sap.com>
Previously, it was only possible to archive the entire repository.
This patch introduces the ability to select specific files and
directories to archive.
Archiving the entire repository remains the default behaviour.
org.eclipse.jgit.api.ArchiveCommand: Adding setPaths(String... paths)
method.
Change-Id: Iedcd40fbfd71238b0088174bbe2717fae196e047
Signed-off-by: Shaul Zorea <shaulzorea@gmail.com>
Previously, setting any TreeFilter on a RevWalk triggered parent
rewriting, which in the current StartGenerator implementation ends up
buffering the entire commit history in memory. Aside from causing poor
performance on large histories, this does not match the default
behavior of `git rev-list`, which does not rewrite parent SHAs unless
asked to via --parents/--children.
Add a new method setRewriteParents() to RevWalk to disable this
behavior. Continue rewriting parents by default to maintain backwards
compatibility.
Change-Id: I1f38e05526071c75ca58095e312663de5e6f334d
When blaming a merge commit with "Ignore whitespace changes" enabled,
don't discard blame candidates for other parents when we encounter a
parent that only has whitespace changes compared to the merge result.
The algorithm early prepares parents for blaming, removing the
appropriate blame regions from the list of regions still to blame. Only
at the end, the prepared blame candidates are submitted for blaming.
When looking at a non-first parent which only differs in whitespace to
the merge result, it submitted that parent, but only to blame it for the
(usually few) lines not already prepared to blame on other parents. Due
to an early return the blame candidates for the previous parents were
forgotten, leaving many lines unannotated.
bug: 433024
Change-Id: I43c9caf2078b92b05e652dbed2192568907bf199
Signed-off-by: Konrad Kügler <swamblumat-eclipsebugs@yahoo.de>
When JGit uses bitmaps (which is the case after a gc), the push command
doesn't go through the code where MissingObjectExceptions are caught
for remote objects not found locally.
Fixed by removing earlier non-locally-found remote objects.
This was seen withing gerrit, see:
https://code.google.com/p/gerrit/issues/detail?id=2025
Bug: 426044
Change-Id: Ieda718a0530e3680036edfa0963ab88fdd1362c0
Signed-off-by: Jean-Jacques Lafay <jeanjacques.lafay@gmail.com>
Signed-off-by: Doug Kelly <dougk.ff7@gmail.com>
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Instead of requiring the caller to know how to list remote
names or parse remote branch names, add a few utilities for
that.
Change-Id: Ib6b2403532f4abbce594a03c0b9da49d30b19f70
Signed-off-by: Robin Rosenberg <robin.rosenberg@dewire.com>
Streaming packed deltas is so slow that it never feasibly completes
(it will take hours for it to stream a few hundred megabytes on
relatively fast systems with a large amount of storage). This
was indicated as a "failed experiment" by Shawn in the following
mailing list post:
http://dev.eclipse.org/mhonarc/lists/jgit-dev/msg01674.html
Change-Id: Idc12f59e37b122f13856d7b533a5af9d8867a8a5
Signed-off-by: Doug Kelly <dougk.ff7@gmail.com>
Currently the repo sub-command only "works", but the submodules will have .git
directories themselves, and lacks group support.
Change-Id: I88a6ee07109187c6c9bfd92a044775fcfb5befa6
Signed-off-by: Yuxuan 'fishy' Wang <fishywang@google.com>
Problem:
The BlameGenerator used the RevFlag SEEN to mark commits it had
already looked at (but not necessarily processed), to prevent
processing a commit multiple times. If a commit is a conflicting
merge that contains lines of the merge base, that have been deleted
in its first parent, either these lines or the lines untouched
since the merge base would not be blamed properly.
This happens for example if a file is modified on a main branch in an
earlier commit M and on a side branch in a later commit S. For this
example, M deletes some lines relative to the common base commit B,
and S modifies a subset of these lines, leaving some other of these
lines untouched.
Then side is merged into main, creating a conflict for these
lines. The merge resolution shall carry over some unmodified lines
from B that would otherwise be deleted by M. The route to blame
these lines is via S to B. They can't be blamed via M, as they
don't exist there anymore.
Q
|\
| \
| S
| |
M |
| /
|/
B
Blaming the merged file first blames via S, because that is the
most recent commit. Doing so, it also looks at B to blame the
unmodified lines of B carried over by S into the merge result. In the
course of this, B is submitted for later processing and marked SEEN.
Later M is blamed. It notices that its parent commit B has been
SEEN and aborts processing for M. B is blamed after that, but only
for the lines that survived via S.
As a result, only the lines contributed by S or by B via S are
blamed. All the other lines that were unchanges by both M and S,
which should have been blamed to B via M, are not blamed.
Solution:
Don't abort processing when encountering a SEEN commit. Rather add the
new region list of lines to be blamed to those of the already SEEN and
enqueued commit's region list. This way when the B commit of the
above example is processed, it will blame both the lines of M and S,
yielding a complete blame result.
Bug: 374382
Change-Id: I369059597608022948009ea7708cc8190f05a8d3
Signed-off-by: Konrad Kügler <swamblumat-eclipsebugs@yahoo.de>
Signed-off-by: Shawn Pearce <spearce@spearce.org>
Change-Id: Id9a641dd67c4182bb3a0dc83a6864fee43e7653f
Signed-off-by: Gustaf Lundh <gustaf.lundh@sonymobile.com>
Signed-off-by: Sven Selberg <sven.selberg@sonymobile.com>
There are certain ref names which native git can be create only on
non-windows systems (e.g. "refs/tags/>"). On Windows systems we can't
persist this refs because the ref names are not valid file names. Our
tests in ValidRefNameTest assumed that these are valid refs on all
systems. This broke the tests on Windows.
Change-Id: Ic53c396c88b84cbdf579a636953f7519952270c0
This would be a problem for any OS where Java lets the subscond
part through to the File API. The fix is to force the timetamp
of the index rather than trusting it to just happen to be right.
Bug: 430765
Change-Id: Id6b3ba003f58427a3ffaacd224649e2d6c93566b
Signed-off-by: Robin Rosenberg <robin.rosenberg@dewire.com>
When safeForMacOS is enabled the checker verifies a name does not
match against another name in the same tree after normalization to
NFC. The check was incorrect and failed when the first name was put
in, rejecting simple trees containing only one file like "F".
Add a test for this simple tree to verify it is accepted.
Fix the test for NFC normalization to actually normalize
and have a collision.
Change-Id: I39e7d71150948872bff6cd2b06bf8dae52aa3c33
Christian Halstrick
Konrad Kügler
Robin Rosenberg
Matthias Sohn
Stefan Lay
Dave Borowitz
Yuxuan 'fishy' Wang
Roberto Tyley
Andreas Hermann
Laurent Goujon
Shaul Zorea
Jean-Jacques Lafay
Doug Kelly
Sven Selberg
Shawn Pearce