Remove completely the empty directories under refs/<namespace>
including the first level partition of the changes, when they are
completely empty.
Bug: 536777
Change-Id: I88304d34cc42435919c2d1480258684d993dfdca
Signed-off-by: Luca Milanesio <luca.milanesio@gmail.com>
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Get the full IOException of the reason why a directory
cannot be removed during GC.
Change-Id: Ia555bce009fa48087a73d677f1ce3b9c0b685b57
Signed-off-by: Luca Milanesio <luca.milanesio@gmail.com>
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
After packaging references, the folders containing these references are
not deleted. In a busy repository, this causes operations to slow down
as traversing the references tree becomes longer.
Delete empty reference folders after the loose references have been
packed.
To avoid deleting a folder that was just created by another concurrent
operation, only delete folders that were not modified in the last 30
seconds.
Signed-off-by: Hector Oswaldo Caballero <hector.caballero@ericsson.com>
Change-Id: Ie79447d6121271cf5e25171be377ea396c7028e0
Signed-off-by: Luca Milanesio <luca.milanesio@gmail.com>
Signed-off-by: David Pursehouse <david.pursehouse@gmail.com>
Log as warning when an attempt to remove a directory
fails. This helps troubleshooting some bugs like the GC leaving
behind empty directories.
Change-Id: Idb94ce17f8be9668a970c7ecae31436bf434073c
Signed-off-by: Luca Milanesio <luca.milanesio@gmail.com>
This change fixes the issue [1]. Before this fix, a merge involving
the caching of consecutive yet similar filenames with Norwegian
characters [2] used to throw an IllegalStateException: Duplicate
stages not allowed. This was caused by inaccurate decoding of the
filenames, using string values assuming default encoding. In the
toString method of DirCacheEntry, used before through getPathString,
UTF-8 encoding is used, but the end result becomes default encoding,
through Object's default toString usage. The special characters in
those two consecutive (particular) filenames [2] were becoming the
very same decoded /single character, lending consecutive -but then
identical- filenames. Thus the perceived duplicate 0-staging of the
file(s).
Replace getPathString usage with getRawPath for this specific case,
or use byte array representations of cached entries instead of string.
Adding a test for this change is not possible, as there is no known
way to change the default encoding for filenames such as [2] (e.g.).
JGitTestUtil does write file contents through UTF-8, but encoding like
so does not apply to the actual file name. Hence there is no way to
create files with names properly made of special characters such as
[2]'s. And the test that is necessary for this case assumes such
Norwegian (or similar characters) filenames. Changing the default
locale programmatically in a test has no effect either. And changing
the LANG value passed to the JVM is only possible upon starting it.
[1] https://bugs.chromium.org/p/gerrit/issues/detail?id=9153
[2] <=>
(...)
"a/b/SíÒr-Norge.map",
"a/b/Sør-Norge.map",
(...)
Change-Id: Ib9f2f5297932337c9817064cc09d9f774dd168f4
Signed-off-by: Marco Miller <marco.miller@ericsson.com>
If I run
git config --global protocol.version 2
mkdir repo
cd repo
git init --bare
git remote add origin https://go.googlesource.com/proposal
git fetch --depth=1
git fetch --unshallow
then I expect to have a full history, just as though I had fetched
without --depth in the first place. Instead, it reports success
but does not fetch enough objects:
$ git fsck
notice: HEAD points to an unborn branch (master)
Checking object directories: 100% (256/256), done.
Checking objects: 100% (468/468), done.
broken link from commit 2c6bc83f234085c8eadb7ea33405ce6223c44d1b
to commit 878975cf2b600675b4c905e5d9591bd24541ae9e
missing commit 878975cf2b600675b4c905e5d9591bd24541ae9e
dangling commit 314be00dae78dd526851f5635e6349014e2ad0c2
The false success indicates problems in the client and the server.
Git 2.18-rc2 (the client) ought to have been more defensive, noticing
the incomplete history. The greater error is in JGit (the server),
which neglects to send the objects requested.
When serving protocol v0 requests, JGit sends the correct objects by
taking unshallowCommits into account when generating the pack to send
to the client. Do the same in the protocol v2 code path. I forgot to
do this in v5.0.0.201806050710-rc3~6 (Teach UploadPack shallow fetch
in protocol v2, 2018-03-15).
Reported-by: Russ Cox <rsc@golang.org>
Change-Id: I282b45f47616a641b9e8d6210b4a070d3efdbb9b
Signed-off-by: Jonathan Nieder <jrn@google.com>
When SshSupport.runSshCommand fails since the executed external ssh
command failed throw a CommandFailedException.
If discovery of LFS server fails due to failure of the
git-lfs-authenticate command chain the CommandFailureException to the
LfsConfigInvalidException in order to allow root cause analysis in the
application using that.
Change-Id: I2f9ea2be11274549f6d845937164c248b3d840b2
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
JGit now considers lightweight tags only if the --tags option is set
i.e. `git.describe().setAllTags(true)` has to be set, else the default
is now as in c git:
Only annotated tags are evaluated unless you pass true
equivalent to --tags (or --all) by the option setAllTags.
Hint: This (still) doesn't address any difference between c-git
`--all` and `!--all --tags` behavior;
perhaps this might be a follow up request
Bug: 423206
Change-Id: I9a3699756df0b9c6a7c74a7e8887dea0df17c8e7
Signed-off-by: Marcel Trautwein <me+eclipse@childno.de>
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
* URIish seems to have a tiny feature (bug?). The path of the URI
starts with a '/' only if the URI has a port set (it seems).
* GitHub does not return SSH authorization on a single line as Gerrit
does - need to account for that.
* Increase the SSH git-lfs-authenticate timeout, as GitHub sometimes
responds slower than expected.
* Guard against NPE in case the download action does not contain any
additional headers.
Change-Id: Icd1ead3d015479fd4b8bbd42ed42129b0abfb95c
Signed-off-by: Markus Duft <markus.duft@ssi-schaefer.com>
Change-Id: Ib4ebc57236bdea663f27295764886413e2550580
Signed-off-by: Michael Keppler <Michael.Keppler@gmx.de>
Signed-off-by: David Pursehouse <david.pursehouse@gmail.com>
Jsch checks only for the availability of the algorithms given by
Jsch-internal config keys "CheckCiphers", "CheckKexes", and
"CheckSignatures". If the ssh config defines any algorithms
unknown to Jsch not listed in those keys, it'll still propose them
during the negotiation phase, and run into an NPE later on if the
server happens to propose such an algorithm and it gets chosen.
Jsch reads those "CheckCiphers" and the other values from either a
session-local config, or the global static Jsch config. It bypasses
~/.ssh/config for these values.
Therefore, copy these values from the config as read from
~/.ssh/config into the session-specific config. That makes Jsch
check _all_ configured algorithms up front, discarding any for
which it has no implementation. Thus it proposes only algorithms
it actually can handle.
Bug: 535672
Change-Id: I6a68e54f4d9a3267e895c536bcf3c58099826ad5
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
From the javadoc for Files.list:
"The returned stream encapsulates a DirectoryStream. If timely disposal
of file system resources is required, the try-with-resources construct
should be used to ensure that the stream's close method is invoked
after the stream operations are completed."
This is the only call to Files#newDirectoryStream that is not already in
a try-with-resources.
Change-Id: I91e6c56b5d74e8435457ad6ed9e6b4b24d2aa14e
(cherry picked from commit 1c16ea4601)
synchronize on simple Object monitor instead of using ReentrantLock
Change-Id: I897020ab35786336b51b0fef76ea6071aff8aefa
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Ensure that notifyIndexChanged is called every time we call
FileSnapshot.save, except the first.
Change-Id: I5a4e9826e791f518787366ae7c3a0ef3d416d2c1
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
If the configuration variable uploadpack.allowfilter is true, advertise
that "filter" is supported, and support it if the client sends such an
argument.
Change-Id: I7de66c0a0ada46ff71c5ba124d4ffa7c47254c3b
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
A subsequent patch needs dynamic generation of this advertisement
depending on a configuration variable in the underlying repository, so
refactor it into a function instead of using a constant list.
Change-Id: Ie00584add1fb56c9e88c7b57f75703981ea5bb85
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
The implementation of protocol v2 will also need to parse the "filter"
option, so refactor it into its own method.
Change-Id: I751f6e6ca63fab873298594653a3885202297a2e
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
JGit's implementation of the fetch command of protocol v2, unlike its
implementation of ls-refs, currently tolerates unknown arguments.
Tighten fetch to not allow unrecognized arguments and add tests to
verify this behavior for both ls-refs and fetch.
Change-Id: I321161d568bd638252fab1a47b06b924d472a669
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Add support for the "shallow" and "deepen" parameters in the "fetch"
command in the fetch-pack/upload-pack protocol v2. Advertise support for
this in the capability advertisement.
TODO: implement deepen-relative, deepen-since, deepen-not
Change-Id: I7ffd80d6c38872f9d713ac7d6e0412106b3766d7
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Jonathan Nieder <jrn@google.com>
This reduces the amount of state held as instance variables in
UploadPack, and makes it easier for a future patch to contain a clearer
version of UploadPack#processShallow.
Change-Id: I6df80b42f9e5118fda1420692e02e417670cced3
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Jonathan Nieder <jrn@google.com>
Teach UploadPack to support protocol v2 with non-bidirectional pipes,
and add support to the HTTP protocol for v2. This is only activated if
the repository's config has "protocol.version" equal to 2.
Change-Id: I093a14acd2c3850b8b98e14936a716958f35a848
Helped-by: Matthias Sohn <matthias.sohn@sap.com>
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Jonathan Nieder <jrn@google.com>
The canonical implementation also doesn't. Compare current
code in remote.c, function get_stale_heads_cb.[1] Not handling
symrefs in this case was introduced in canonical git in [2]
in 2008.
[1] https://github.com/git/git/blob/v2.17.0/remote.c#L2259
[2] https://github.com/git/git/commit/740fdd27f0
Bug: 533549
Change-Id: If348d56bb4a96b8aa7141f7e7b5a0d3dd4e7808b
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
Callers should use getRefDatabase().peel(ref) instead since it
doesn't swallow the IOException.
Adapt all trivial callers to user the alternative.
DescribeCommand still uses the deprecated method and is not adapted in
this change since it will require more refactoring to add handling of
the IOException.
Change-Id: I14d4a95a5e0570548753b9fc5c03d024dc3ff832
Signed-off-by: David Pursehouse <david.pursehouse@gmail.com>
This means less cognitive overhead for both implementors and callers,
since this way we can guarantee that they are always synonyms for
RefDatabase#exactRef and RefDatabase#findRef, respectively.
Change-Id: Ic8aeb52fc7ed65672f3f6cd1da39a66908d88baa
Signed-off-by: David Pursehouse <david.pursehouse@gmail.com>
Make FileTreeIterator not enter ignored directories by default. We
only need to enter ignored directories if we do some operation against
git, and there is at least one tracked file underneath an ignored
directory.
Walking ignored directories should be avoided as much as possible as
it is a potential performance bottleneck. Some projects have a lot of
files or very deep hierarchies in ignored directories; walking those
may be costly (especially so on Windows). See for instance also bug
500106.
Provide a FileTreeIterator.setWalkIgnoredDirectories() operation to
force the iterator to iterate also through otherwise ignored
directories. Useful for tests (IgnoreNodeTest, CGitIgnoreTest), or
to implement things like "git ls-files --ignored".
Add tests in DirCacheCheckoutTest, and amend IndexDiffTest to test a
little bit more.
Bug: 388582
Change-Id: I6ff584a42c55a07120a4369fd308409431bdb94a
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
Callers should use getRefDatabase().getRefsByPrefix(R_TAGS) instead.
Adjust the tests accordingly.
Bug: 534731
Change-Id: Ib28ae365e42720268996ff46e34cae1745ad545c
Signed-off-by: David Pursehouse <david.pursehouse@gmail.com>
Matthias Sohn
Luca Milanesio
Hector Caballero
Marco Miller
Jonathan Nieder
Marcel Trautwein
Markus Duft
Michael Keppler
Thomas Wolf
Dave Borowitz
Jonathan Tan
Mincong HUANG
David Pursehouse