Expose the following bitmap selection parameters via PackConfig:
"bitmapContiguousCommitCount", "bitmapRecentCommitCount",
"bitmapRecentCommitSpan", "bitmapDistantCommitSpan",
"bitmapExcessiveBranchCount", and "bitmapInactiveBranchAge".
The value of bitmapContiguousCommitCount, whereby bitmaps are
created for the most recent N commits in a branch, has never
been verified. If experiments show that they are not valuable,
then we can simplify the implementation so that there is only
a concept of recent and distant commit history (defined by
"bitmapRecentCommitCount"), and the only controls we need are
"bitmapRecentCommitSpan" and "bitmapDistantCommitSpan".
Change-Id: I288bf3f97d6fbfdfcd5dde2699eff433a7307fb9
Signed-off-by: Terry Parker <tparker@google.com>
Replace the “bitmapCommitRange” parameter that was recently introduced
with two new parameters: “bitmapExcessiveBranchCount” and
“bitmapInactiveBranchAgeInDays”. If the count of branches does not
exceed “bitmapExcessiveBranchCount”, then the current algorithm is kept
for all branches.
If the branch count is excessive, then the commit time for the tip
commit for each branch is used to determine if a branch is “inactive”.
"Active" branches get full commit selection using the existing
algorithm. "Inactive" branches get fewer bitmaps near the branch tips.
Introduce a "contiguousCommitCount" parameter that always enforces that
the N most recent commits in a branch are selected for bitmaps. The
previous nextSelectionDistance() algorithm created anywhere from 1-100
contiguous bitmaps at branch tips.
For example, consider a branch with commits numbering 0-300, with 0
being the most recent commit. If the most recent 200 commits are not
merge commits and the 200th commit was the last one selected,
nextSelectionDistance() returned 100, causing commits 200-101 to be
ignored. Then a window of size 100 was evaluated, searching for merge
commits. Since no merge commits are found, the next commit (commit 0)
was selected, for a total of 1 commit in the topmost 100 commits.
If instead the 250th commit was selected, then by the same logic
commit 50 is selected. At that point nextSelectionDistance() switches to
selecting consecutive commits, so commits 0-50 in the topmost 100
commits are selected. The "contiguousCommitCount" parameter provides
more determinism by always selecting a constant number or topmost
commits.
Add an optimization to break out of the inner loop of selectCommits() if
all of the commits for the current branch have already been found.
When reusing bitmaps from an existing pack, remove unnecessary
populating and clearing of the writeBitmaps/PackBitmapIndexBuilder.
Add comments to PackWriterBitmapPreparer, rename methods and variables
for readability.
Add tests for bitmap selection with and without merge commits and with
excessive branch pruning triggered.
Note: I will follow up with an additional change that exposes the new
parameters through PackConfig.
Change-Id: I5ccbb96c8849f331c302d9f7840e05f9650c4608
Signed-off-by: Terry Parker <tparker@google.com>
LocalDiskRepositoryTestCase and TestRepository have competing ideas
about time. Push them into MockSystemReader so they can
cooperate.
Rename getClock() methods that return Dates to getDate().
Change-Id: Ibbd9fe7f85d0064b0a19e3b675b9718a9e67c479
Signed-off-by: Terry Parker <tparker@google.com>
Building on top of https://git.eclipse.org/r/#/c/56391/
Here we preserve compatibility with JetS3t
and add 2 new native JGit encryption implementations.
For reference, see connection configuration files:
* Version 0: jgit-s3-connection-v-0.properties
* Version 1: jgit-s3-connection-v-1.properties
* Version 2: jgit-s3-connection-v-2.properties
Change-Id: I713290bcacbe92d88e5ef28ce137de73dd1abe2f
Signed-off-by: Andrei Pozolotin <andrei.pozolotin@gmail.com>
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
See previous attempt: https://git.eclipse.org/r/#/c/16674/
Here we preserve as much of JetS3t mode as possible
while allowing to use new Java 8+ PBE algorithms
such as PBEWithHmacSHA512AndAES_256
Summary of changes:
* change pom.xml to control long tests
* add WalkEncryptionTest.launch to run long tests
* add AmazonS3.Keys to to normalize use of constants
* change WalkEncryption to support AES in JetS3t mode
* add WalkEncryptionTest to test remote encryption pipeline
* add support for CI configuration for live Amazon S3 testing
* add log4j based logging for tests in both Eclipse and Maven build
To test locally, check out the review branch, then:
* create amazon test configuration file
* located your home dir: ${user.home}
* named jgit-s3-config.properties
* file format follows AmazonS3 connection settings file:
accesskey = your-amazon-access-key
secretkey = your-amazon-secret-key
test.bucket = your-bucket-for-testing
* finally:
* run in Eclipse: WalkEncryptionTest.launch
* or
* run in Shell: mvn test --define test=WalkEncryptionTest
Change-Id: I6f455fd9fb4eac261ca73d0bec6a4e7dae9f2e91
Signed-off-by: Andrei Pozolotin <andrei.pozolotin@gmail.com>
At least on Windows the test failed each second time on the last assert.
Adding a small timeout before gc.prune() makes the test stable again.
Change-Id: I23d98dd565912c58dcf2f24f3ebc24824670cff3
Signed-off-by: Andrey Loskutov <loskutov@gmx.de>
RepoCommandTest was failing because of open file handle left.
IgnoreNodeTest was failing because of problems with creation of files
with trailing spaces on Windows.
HookTest was failing because of wrong line delimiter.
Change-Id: I34f074ac447eb4c3ada8b250309bb568b426189d
Signed-off-by: Andrey Loskutov <loskutov@gmx.de>
If the checkout path is currently a non-empty directory (and was a link
or a regular file before), this directory will be removed before
performing checkout, but only if the checkout path is specified.
Bug: 474973
Change-Id: Ifc6c61592d9b54d26c66367163acdebea369145c
Signed-off-by: Andrey Loskutov <loskutov@gmx.de>
A bitmap index contains bitmaps for a set of commits in a pack file.
Creating a bitmap for every commit is too expensive, so heuristics
select the most "important" commits. The most recent commits are the
most valuable. To clone a repository only those for the branch tips are
needed. When fetching, only commits since the last fetch are needed.
The commit selection heuristics generally work, but for some
repositories the number of selected commits is prohibitively high. One
example is the MSM 3.10 Linux kernel. With over 1 million commits on
2820 branches, the current heuristics resulted in +36k selected commits.
Each uncompressed bitmap for that repository is ~413k, making it
difficult to complete a GC operation in available memory.
The benefit of creating bitmaps over the entire history of a repository
like the MSM 3.10 Linux kernel isn't clear. For that repository, most
history for the last year appears to be in the last 100k commits.
Limiting bitmap commit selection to just those commits reduces the count
of selected commits from ~36k to ~10.5k. Dropping bitmaps for older
commits does not affect object counting times for clones or for fetches
on clients that are reasonably up-to-date.
This patch defines a new "bitmapCommitRange" PackConfig parameter to
limit the commit selection process when building bitmaps. The range
starts with the most recent commit and walks backwards. A range of 10k
considers only the 10000 most recent commits. A range of zero creates
bitmaps only for branch tips. A range of -1 (the default) does not limit
the range--all commits in the pack are used in the commit selection
process.
Change-Id: Ied92c70cfa0778facc670e0f14a0980bed5e3bfb
Signed-off-by: Terry Parker <tparker@google.com>
Previously the method DirCacheCheckoutTest#assertWorkDir() silently
skipped over empty folders. If tests would have left unexpected empty
folders in the worktree this would be overlooked. Now empty folders have
to be specified by something like mkmap("<foldername>", "/", ...]
Change-Id: Idb8b270e92daf02ecdc381d148a5958bd83ec057
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
On a server also running Gerrit that is using RepoCommand to
convert from an XML manifest to a git submodule superproject
periodically, it would be handy to be able to use Gerrit's
submodule subscription feature[1] to update the superproject
automatically between RepoCommand runs as changes are merged
in each subprojects.
This requires setting the 'branch' field for each submodule
so that Gerrit knows what branch to watch. Add an option to
do that.
Setting the branch field also is useful for plain Git users,
since it allows them to use "git submodule update --remote" to
manually update all submodules between RepoCommand runs.
[1] https://gerrit-review.googlesource.com/Documentation/user-submodules.html
Change-Id: I1a10861bcd0df3b3673fc2d481c8129b2bdac5f9
Signed-off-by: Stefan Beller <sbeller@google.com>
This patch makes JGit parsing of ignore rules containing unmatched '['
bracket compatible to the Git CLI.
Since '[' starts character group, Git tries to parse the ignore rule as
a shell glob pattern and if the character group is not closed, the glob
pattern is invalid and so the ignore rule never matches anything.
See also http://article.gmane.org/gmane.comp.version-control.git/278699.
Bug: 478490
Change-Id: I734a4d14fcdd721070e3f75d57e33c2c0700d503
Signed-off-by: Andrey Loskutov <loskutov@gmx.de>
This test case was developed in the scope of bug 478065.
Bug: 478065
Change-Id: Ibcce1ed375d4a6ba05461e6c6b287d16752fa681
Signed-off-by: Sébastien Arod <sebastien.arod@gmail.com>
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
An attempt to re-implement not well documented Git CLI behavior for
patterns with backslashes.
It looks like Git silently ignores all \ characters in ignore rules, if
they are NOT covered by 3 cases described in [1]:
{quote}
1) ... Put a backslash ("\") in front of the first hash for patterns
that begin with a hash.
...
2) Trailing spaces are ignored unless they are quoted with backslash
("\").
...
3) Put a backslash ("\") in front of the first "!" for patterns that
begin with a literal "!", for example, "\!important!.txt".
{quote}
Undocumented also is the fact that backslash itself can be escaped by
backslash.
So \h\e\l\l\o\.t\x\t rule matches hello.txt and a\\\\b a\b in Git CLI.
Additionally, the glob parser [2] knows special meaning of backslash:
{quote}
One can remove the special meaning of '?', '*' and '[' by preceding
them by a backslash, or, in case this is part of a shell command
line, enclosing them in quotes. Between brackets these characters
stand for themselves. Thus, "[[?*\]" matches the four characters
'[', '?', '*' and '\'.
{quote}
[1] https://www.kernel.org/pub/software/scm/git/docs/gitignore.html
[2] http://man7.org/linux/man-pages/man7/glob.7.html
Bug: 478065
Change-Id: I3dc973475d1943c5622103701fa8cb3ea0684e3e
Signed-off-by: Andrey Loskutov <loskutov@gmx.de>
Currently we fail to properly recognize character group if the pattern
before character group contains opening bracket.
See comment from Sebastien Arod on https://git.eclipse.org/r/56678/
Change-Id: I70d3657a2a328818ea2bdc1409d18ecb3a85825b
Signed-off-by: Andrey Loskutov <loskutov@gmx.de>
Current DiffFormat behavior regarding submodules (aka git links) is
incorrect. The "Subproject commit <sha1>" appears as part of the diff
header, rather than as its own hunk.
--> From JGit implementation
diff --git a/plugins/cookbook-plugin b/plugins/cookbook-plugin
index b9d3ca8..ec6ed89 160000
--- a/plugins/cookbook-plugin
+++ b/plugins/cookbook-plugin
-Subproject commit b9d3ca8a65030071e28be19296ba867ab424fbbf
+Subproject commit ec6ed89c47ba7223f82d9cb512926a6c5081343e
--> From C Git 2.5.2
diff --git a/plugins/cookbook-plugin b/plugins/cookbook-plugin
index b9d3ca8..ec6ed89 160000
--- a/plugins/cookbook-plugin
+++ b/plugins/cookbook-plugin
@@ -1 +1 @@
-Subproject commit b9d3ca8a65030071e28be19296ba867ab424fbbf
+Subproject commit ec6ed89c47ba7223f82d9cb512926a6c5081343e
The current way of processing submodules results in no hunk header and
includes the contents of the hunk as part of the headers. To fix this, we
can't just have our writeGitLinkDiffText output the hunk header. We have
to change the flow so that the raw text gets parsed as a diff. The easiest
way to do this is to fake the RawText in the FormatResult when we have a
GITLINK.
It should be noted that it seems possible for there to be a difference
between a GITLINK and a non-GITLINK, but I don't think this can happen in
practice, so I don't think we need to worry too much about it.
This patch also fixes up the test for GitLink headers, as the test was
for the old behavior. My setup has 3 other failing tests which may or
may not be the result of environmental changes. However, the same tests
fail without this commit, so I do not believe they are related.
Bug: 477759
Change-Id: If13f7b406904fad814416c93ed09ea47ef183337
Signed-off-by: Jacob Keller <jacob.keller@gmail.com>
Ignore rules should escape $^(){}+| chars if using regular expressions,
because they should be treated literally if they aren't part of a
character group.
Bug: 478055
Change-Id: Ic7276442d7f8f02594b85eae1ef697362e62d3bd
Signed-off-by: Andrey Loskutov <loskutov@gmx.de>
Fix the unit tests to not do boxing by using assertEquals(int, int)
instead of assertThat with a matcher.
Change-Id: I5412fe2f72c8ea0227b9ff3a3352ccb555e22231
Signed-off-by: Hugo Arès <hugo.ares@ericsson.com>
When we have a URI that contains an empty path component (that is
it only contains a "/") we want to fall back to the host as
humanish name.
This change is according to the behavior of upstream git, which
falls back on the hostname when guessing directory names for
newly cloned repositories (see [1] for the discussion).
[1] http://article.gmane.org/gmane.comp.version-control.git/274669
Change-Id: I44400c6ab72a2722d2155d53d63671bd867d6c44
Signed-off-by: Patrick Steinhardt <ps@pks.im>
If no refs match the input list and we are writing to a batch,
the returned new commit from write() will match the current commit.
Adding a command to the batch for this case is harmless as it will
succeed, but it's more straightforward to just skip adding a command
in this case.
Add tests or the combination of saving matching refs and saving to a
batch.
Change-Id: I6837389b08e6c80bc2d4c9e9c506d07293ea5fb2
- use NIO2's Files.move() to reimplement rename()
- provide a second method accepting CopyOptions which can be used to
request atomic move.
Change-Id: Ibcf722978e65745218a1ccda45344ca295911659
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
The WorkingTreeIterator.isEntryIgnored() should use originally requested
file mode while descending to the file tree root and checking ignore
rules. Original code asking isEntryIgnored() on a file was using
directory mode instead if the .gitignore was not located in the same
directory.
Bug: 473506
Change-Id: I9f16ba714c3ea9e6585e9c11623270dbdf4fb1df
Signed-off-by: Andrey Loskutov <loskutov@gmx.de>
When during Merge for a certain path OURS & BASE contains a file and
THEIRS contains a folder there was a bug in JGit leading to unnecessary
conflicts. This commit fixes it and adds a test for this situation.
Bug: 472693
Change-Id: I71fac5a6a2ef926c01adc266c6f9b3275e870129
Also-by: Clemens Buchacher <drizzd@aon.at>
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
According to [1] leading spaces are allowed in ignore rules and trailing
spaces are allowed too if they are escaped via backslash.
[1] https://www.kernel.org/pub/software/scm/git/docs/gitignore.html
Bug: 472762
Change-Id: I5e3ae5599cb9e5d80072f38c82c20cbc9475a18a
Signed-off-by: Andrey Loskutov <loskutov@gmx.de>
According to [1] backslash can escape leading special characters '#' and
'!' in ignore rules, so that they are treated literally.
[1] https://www.kernel.org/pub/software/scm/git/docs/gitignore.html
Bug: 463581
Change-Id: I4c02927413a9c63ea5dbf2954877080d902ec1b2
Signed-off-by: Andrey Loskutov <loskutov@gmx.de>
While checking if we should consider an ignore rule without '[]'
brackets as a regular expression, check if the backslash escapes one of
the glob special characters '?', '*', '[', '\\'. If not, backslash is
not a part of a regex and should be treated literally.
Bug: 463581
Change-Id: I85208c7f85246fbf6c5029ce3c8b7bb8f4dbd947
Signed-off-by: Andrey Loskutov <loskutov@gmx.de>
Consider a BatchRefUpdate produced by Gerrit Code Review, where the
original command pushed over the wire might refer to
"refs/for/master", but that command is ignored and replaced with some
additional commands like creating "refs/changes/34/1234/1". We do not
want to store the cert in "refs/for/master@{cert}", since that may
lead someone looking to the ref to the incorrect conclusion that that
ref exists.
Add a separate put method that takes a collection of commands, and
only stores certs on those refs that have a matching command in the
cert.
Change-Id: I4661bfe2ead28a2883b33a4e3dfe579b3157d68a
37a1e4be moved this constant causing the following error message in
Eclipse: "The static field LocalDiskRepositoryTestCase.CONTENT should be
accessed directly".
Change-Id: I4ceb57a30f2e5a8f7e55109ef260a244ed5e7044
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Inspired by a proposal from gitolite[1], where we store a file in
a tree for each ref name, and the contents of the file is the latest
push cert to affect that ref.
The main modification from that proposal (other than lacking the
out-of-git batching) is to append "@{cert}" to filenames, which allows
storing certificates for both refs/foo and refs/foo/bar. Those
refnames cannot coexist at the same time in a repository, but we do
not want to discard the push certificate responsible for deleting the
ref, which we would have to do if refs/foo in the push cert tree
changed from a tree to a blob.
The "@{cert}" syntax is at least somewhat consistent with
gitrevisions(7) wherein @{...} describe operators on ref names.
As we cannot (currently) atomically update the push cert ref with the
refs that were updated, this operation is inherently racy. Kick the can
down the road by pushing this burden on callers.
[1] cf062b8bb6/contrib/hooks/repo-specific/save-push-signatures
Change-Id: Id3eb32416f969fba4b5e4d9c4b47053c564b0ccd
This will allow us to write the super project in a branch other than
master.
Change-Id: I578ed9ecbc6423416239e31ad644531dae9fb5c3
Signed-off-by: Yuxuan 'fishy' Wang <fishywang@google.com>
When pushing to an HTTP server using the C git client, I observed a
certificate lacking a pushee field. Handle this gracefully in the
parser.
Change-Id: I7f3c5fa78f2e35172a93180036e679687415cac4
We intend to store received push certificates somewhere, like a
particular ref in the repository in question. For reading data back
out, it will be useful to read push certificates (without pkt-line
framing) in a streaming fashion.
Change-Id: I70de313b1ae463407b69505caee63e8f4e057ed4
Matthias Sohn
Terry Parker
Marc Strapetz
Andrei Pozolotin
Andrey Loskutov
Christian Halstrick
Stefan Beller
Sébastien Arod
Jacob Keller
Hugo Arès
Patrick Steinhardt
Dave Borowitz
Yuxuan 'fishy' Wang