readPipe() may consume rather much time, so
gitPrefix should be cached. If the git executable changes,
users should run FS.detect() again to get a new
instance of FS_Win32.
Ensure the JIT knows the table cannot be changed during the critical
inner loop of get() or insert() by loading the field into a final
local variable. This shouldn't be necessary, but the instance member
is declared non-final (to resizing) and it is not very obvious to the
JIT that the table cannot be modified by AnyObjectId.equals().
Simplify the JIT's decision making by making it obvious, these
values cannot change during the critical inner loop, allowing
for better register allocation.
Change-Id: I0d797533fc5327366f1207b0937c406f02cdaab3
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
This method is trivial in definition, and is called in only 3
places. Inline the method manually to ensure its really going
to be inlined by the JIT at runtime.
Change-Id: I128522af8167c07d2de6cc210573599038871dda
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
32 is way to small for the map. Most applications using the map
will need to load more than 16 objects just from the root refs
being read from the Repository.
Default the initial size to 2048. This cuts out 6 expansions in
the early life of the table, reducing garbage and rehashing time.
Change-Id: I6dd076ebc0b284f1755855d383b79535604ac547
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
If the table needs to be grown, do it before the current insertion
rather than after. This is a tiny micro-optimization that allows
the compiler to reuse the result of "++size" to compare against
previously pre-computed size at which the table should rehash itself.
Change-Id: Ief6f81b91c10ed433d67e0182f558ca70d58a2b0
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Bitwise and is faster than integer modulus operations, and since
the table size is always a power of 2, this is simple to use for
index operation.
Change-Id: I83d01e5c74fd9e910c633a98ea6f90b59092ba29
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
obj_hash doesn't match our naming conventions, camelCaseNames
are the preferred format.
Change-Id: I72da199daccb60a98d17b6af1e498189bf149515
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
A standard HashSet was being used to store the list of subsections as
they were being parsed. This was changed to use a LinkedHashSet so
that iterating over the set would return values in the same order as
they are listed in the config file.
Change-Id: I4251f95b8fe0ad59b07ff563c9ebb468f996c37d
Javadoc for ScheduledThreadPoolExecutor says [1]:
While ScheduledThreadPoolExecutor inherits from ThreadPoolExecutor, a
few of the inherited tuning methods are not useful for it. In
particular, because it acts as a fixed-sized pool using corePoolSize
threads and an unbounded queue, adjustments to maximumPoolSize have no
useful effect.
[1]
http://download.oracle.com/javase/6/docs/api/java/util/concurrent/ScheduledThreadPoolExecutor.html
Change-Id: I8eccb7d6544aa6e27f5fa064c19dddb2a706523f
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Instead of resizing an ArrayList until all objects have been added,
append objects into a specialized List type that uses small arrays
of 1024 entries for each 1024 objects added.
For a large repository like linux-2.6, PackWriter will now allocate
1,758 smaller arrays to hold the object list, without creating any
garbage from the intermediate states due to list expansion.
1024 was chosen as the block size (and initial directory size) as this
is a reasonable balance for the PackWriter code. Each block uses
approximately 4096 bytes in a 32 bit JVM, as does the default top
level block directory. The top level directory doesn't expand until 1
million items have been added to the list, which for linux-2.6 won't
yet occur as the lists are per-object-type and are thus bounded to
about 1/3 of 1.8 million.
Change-Id: If9e4092eb502394c5d3d044b58cf49952772f6d6
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
The mapTree() routines have been deprecated for a long time, and their
sibilings for mapCommit() and mapTag() were already removed from the
main Repository API.
Remove mapTree(). Application callers who only need the tree's name
can use resolve("^{tree}") syntax to resolve to the tree ObjectId, or
fail if the input is not a tree.
Applications that want to read a tree should use DirCache or TreeWalk.
Change-Id: I85726413790fc87721271c482f6636f81baf8b82
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
This type and its associated methods has been deprecated for a while
now. Time to remove it. Applications can use a TreeWalk instead to
access the elements of any tree-like object.
Change-Id: I047e552ac77b77e2de086f63cb4fb318da57c208
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
This interface has been deprecated for a while now.
Applications can use a TreeWalk instead.
Change-Id: I751d6e919e4b501c36fc36e5f816b8a8c5379cb9
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
This has been deprecated for some time now. Applications should
instead use DirCache within a TreeWalk.
Change-Id: I8099d93f07139c33fe09bdeef8d739782397da17
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
This class has been deprecated for a long time now.
Time to remove it. Applications can use the newer
DirCache.writeTree() as a replacement.
Change-Id: I91dc9507668d8a3ecadd6acd4f1c8b7bd7760cc3
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
This class has been deprecated for a long time now.
Time to remove it. Applications can use the newer
DirCacheCheckout class as a replacement.
Change-Id: Id66d29fcca5a7286b8f8838303d83f40898918d2
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
This interface has been deprecated for a long time now.
Time to remove it.
Change-Id: I29a938657e4637b2a9d0561940b38d70866613f7
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
When I disabled validation I broke the code that handled copying small
objects whose contents were below 8192 bytes in size but spanned over
the end of one window and into the next window. These objects did not
ever populate the temporary write buffer, resulting in garbage writing
into the output stream instead of valid object contents.
Change-Id: Ie26a2aaa885d0eee4888a9b12c222040ee4a8562
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
When fetch TagOpt is AUTO_FOLLOW do not follow refs/tags/ names that
point directly to commits which are on unreleated side branches.
Change-Id: Iea6eee5a05ae7402a7f256fd9c1e3d3b5ccb58dd
Reported-by: Slawomir Ginter <sginter@atlassian.com>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
During unit tests and most likely elsewhere, updates come too fast for
a simple timestamp comparison (with one seconds resolution) to work.
I.e. DirCache thinks it hasn't changed.
Use FileSnapshot instead which has more advanced logic.
Change-Id: Ib850f84398ef7d4b8a8a6f5a0ae6963e37f2b470
Signed-off-by: Robin Rosenberg <robin.rosenberg@dewire.com>
When parsing a string such as "foo-gbed2" resolve() was assuming the
suffix was from git describe output. This lead to JGit trying to find
the completion for the object abbreviation "bed2", rather than using
the current value of the reference. If there was only one such object
in the repository, JGit might actually use the wrong value here, as
resolve() would return the completion of the abbreviation "bed2"
rather than the current value of the reference "refs/heads/foo-gbed2".
Move the parsing of git describe abbreviations out of the operator
portion of the resolve() method and into the simple portion that is
supposed to handle only object ids or reference names, and only do the
describe parsing after all other approaches have already failed to
provide a resolution.
Add new unit tests to verify the behavior is as expected by users.
Bug: 338839
Change-Id: I52054d7b89628700c730f9a4bd7743b16b9042a9
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Applications may already have a Ref or ObjectId on hand that they want
the remote to be updated to. Instead of converting these into a
String and relying on the parsing rules of resolve(), allow the
application to supply the Ref or ObjectId directly.
Bug: 338839
Change-Id: If5865ac9eb069de1c8f224090b6020fc422f9f12
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
If object reuse validation is enabled, the output pack is going to
probably be stored locally. When reusing an existing cached pack
to save object enumeration costs, ensure the cached pack has not
been corrupted by checking its SHA-1 trailer. If it has, writing
will abort and the output pack won't be complete. This prevents
anyone from trying to use the output pack, and catches corruption
before it can be carried any further.
Change-Id: If89d0d4e429d9f4c86f14de6c0020902705153e6
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
There is no need to validate the object contents during
copyObjectAsIs if the result is going to be parsed by unpack-objects
or index-pack. Both programs will compute the SHA-1 of the object,
and also validate most of the pack structure. For git daemon
like servers, this work is already done on the client end of the
connection, so the server doesn't need to repeat that work itself.
Disable object validation for the 3 transport cases where we know
the remote side will handle object validation for us (push, bundle
creation, and upload pack). This improves performance on the server
side by reducing the work that must be done.
Change-Id: Iabb78eec45898e4a17f7aab3fb94c004d8d69af6
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Annotated tags need to be parsed by many viewing tools, but putting
them at the end of the pack hurts because kernel prefetching might
not have loaded them, since they are so far from the commits they
reference.
Position tags right behind the commits, but before the trees.
Typically the annotated tag set for a repository is very small,
so the extra prefetch burden it puts on tools that don't need
annotated tags (but do need commits and trees) is fairly low.
Change-Id: Ibbabdd94e7d563901c0309c79a496ee049cdec50
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
This simple refactoring makes it easier to pre-process each of the
object lists before its handed into the actual write routine.
Change-Id: Iea95e5ecbc7374f6bcbb43d1c75285f4f564d09d
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
JGit doesn't generate deltas for commit or tag objects when it packs
a repository from scratch. This is an explicit design decision that
is (mostly) justified by the fact that these objects do not delta
compress well.
Annotated tags are made once on stable points of the project history,
it is unlikely they will ever appear again with sufficient common
text to justify using a delta over just deflating the raw content.
JGit never tries to delta compress annotated tags and I take the
stance that these are best stored as non-deltas given how frequently
they might be accessed by repository viewers.
Commits only have sufficient common text when they are cherry-picked
to forward-port or back-port a change from one branch to another.
Even in these cases the distance between the commits as returned
by the log traversal has to be small enough that they would both
appear in the delta search window at the same time in order to
delta compress one of the messages against the other. JGit never
tries to delta compress commits, as it requires a lot of CPU time
but typically does not produce a smaller pack file.
Avoid reusing deltas for either of these types when constructing a
new pack. To avoid killing performance during serving of network
clients, UploadPack disables this code change by allowing PackWriter
to reuse delta commits. Repositories that were already repacked by
C Git will not have their delta commits decompressed and recompressed
on the fly during object writing, saving server-side CPU resources.
Change-Id: I749407e7c5c677e05e4d054b40db7656cfa7fca8
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
This is a tiny optimization to how delta search works. Checking for
isReuseAsIs() avoids doing delta compression search on non-delta
objects already stored in packs within the repository. Such objects
are not likely to be delta compressable, as they were already delta
searched when their containing pack was generated and they were
not delta compressed at that time. Doing delta compression now is
unlikely to produce a different result, but would waste a lot of CPU.
The isReuseAsIs() flag is checked before isDoNotDelta() because it
is very common to reuse objects in the output pack. Most objects
get reused, and only a handful have the isDoNotDelta() bit set.
Moving the check earlier allows the loop to more quickly skip
through objects that will never need to be considered.
Change-Id: Ied757363f775058177fc1befb8ace20fe9759bac
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
The alarm queue threads were started with an empty task body, which
meant the thread started and terminated immediately, leaving the
queue itself with no worker.
Change-Id: I2a9b5fe9c2bdff4a5e0f7ec7ad41a54b41a4ddd6
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Instead of polling the system clock on every update(1) method call,
use a scheduled executor to toggle a volatile once per second until
the task is done. Check the volatile on each update(int), looking
to see if output should occur.
This limits progress output to either once per 1% complete, or once
per second. To save time during update calls the timer isn't reset
during each 1% of output, which means we may see one unnecessary
output trigger if at least 1% completed during the one second of the
alarm time.
Change-Id: I8fdd7e31c37bef39a5d1b3da7105da0ef879eb84
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Checkout of remote tracking branch failed when no local branch
existed. Also enhance RepositoryTestCase to enable checking index
state of another test repository.
Bug: 337695
Change-Id: Idf4c05bdf23b5161688818342b2bf9a45b49f479
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
JDK7 changed behavior slightly on some InputStream types, resulting in
the first read being shorter than the count requested. That caused us
to overwrite the earlier part of the buffer with later data, as the
offset index wasn't updated in the loop.
Fix the loop to increment offset by the number of bytes read in this
iteration, so the next read appends to the buffer rather than doing an
overwrite.
Bug: 338119
Change-Id: I222fb2f993cd9b637b6b8d93daab5777ef7ec7a6
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
FetchCommand now does not set a null credentials provider on
Transport because in this case the default provider is replaced with
null and the default mechanism for providing credentials is not
working.
Change-Id: I44096aa856f031545df39d4b09af198caa2c21f6
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
In bc1af8459e ("RevWalk: Don't reset ObjectReader when stopping") we
stopped releasing the reader when the current log traversal is over.
This should have also been applied to the merge base logic that is
buried within MergeGenerator, but got missed.
Change-Id: I8328f43f02cba06fd545e22134872e781b9d4d36
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Also use FS.resolve() to properly resolve files from path strings.
Bug: 328428 (partial fix)
Change-Id: I41d94694f220dcb85605c9acadfffb1fa23beaeb
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
We did not record the time spent on the object reuse search or the
object size lookup, both of which occur between the counting phase and
the compressing phase. If there are enough objects involved, these
times can be significant so its worth timing them and recording it.
Change-Id: I89084acfc598bb6533d75d90cb8de459f0ed93be
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Support for --no-standard-notes and --show-notes=REF options is added
to the Log command. The --show-notes option can be specified more than
once if more than one notes branch should be used for showing notes.
The notes are displayed from note branches in the order how the note
branches are specified in the command line. However, the standard note,
from the refs/notes/commits, is always displayed as first unless
the --no-standard-notes options is given.
Change-Id: I4e7940804ed9d388b625b8e8a8e25bfcf5ee15a6
Signed-off-by: Chris Aniszczyk <caniszczyk@gmail.com>
The total delta count is supposed to include reused deltas, not
just newly created deltas.
Change-Id: I98cbdcef80d59714a4f62ff322e7b709b08b6d26
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
A checked Exception is thrown instead.
The reason for throwing an Exception is that the state of the
repository is inconsistent in this case: There is a merge
configuration containing a non-existing local branch. Ideally the
deletion of a local branch should also delete the corresponding
merge configuration.
Bug: 337315
Change-Id: I8ed57d5aaed60aaab685fc11a8695e474e60215f
Signed-off-by: Stefan Lay <stefan.lay@sap.com>
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Many source browsers and network related tools like UploadPack need
to find and parse the target of all branches and annotated tags
within the repository during their startup phase. Clustering these
together into the same part of the pack file will improve locality,
reducing thrashing when an application starts and needs to load
all of these into memory at once.
To prevent bottlenecking basic log viewing tools that are scannning
backwards from the tip of a current branch (and don't need tags)
we place this cluster of older targets after 4096 newer commits
have already been placed into the pack stream. 4096 was chosen as
a rough guess, but was based on a few factors:
- log viewers typically show 5-200 commits per page
- users only view the first page or two
- DHT can cram 2200-4000 commits per 1 MiB chunk
thus these will fall into the second commit chunk (roughly)
Unfortunately this placement hurts history tools that are scanning
backwards through the commit graph and completely ignored tags or
branch heads when they started.
An ancient tagged commit is no longer positioned behind its first
child (its now much earlier), resulting in a page fault for the
parser to reload this cluster of objects on demand. This may be
an acceptable loss. If a user is walking backwards and has already
scanned through more than 4096 commits of history, waiting for the
region to reload isn't really that bad compared to the amount of
time already spent.
If the repository is so small that there are less than 4096 commits,
this change has no impact on the placement of objects.
Change-Id: If3052e430d305e17878d94145c93754f56b74c61
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Matthias Sohn
Marc Strapetz
Shawn O. Pearce
Jesse Greenwald
Tomasz Zarna
Robin Rosenberg
Sasa Zivkov
Mathias Kinzler
Stefan Lay