EGit change Iba3b87293c22e5fe7d989fc312184aa7463c4387 is also required
to make this work for EGit.
Change-Id: Iedc80e133e66d72e78ff0980b6e12634f75eca36
Signed-off-by: Carsten Pfeiffer <carsten.pfeiffer@gebit.de>
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Since this change may affect performance and memory consumption on every
access to a loose ref I explicitly made it a RFC to collect opinions.
Previously RefDirectory.scanRef() was not detecting an update of a
loose ref when the update didn't changed the modification time of
the backing file. RefDirectory cached loose refs and the way to detect
outdated cache entries was to compare lastmodification timestamp on the
file representing the ref. If two updates to the same ref happen faster
than the filesystem-timer granularity (for linux this is 2 seconds)
there is the possiblity that we don't detect the update.
Because of this bug EGit's PushOperationTest only works with 2 second
sleeps inside.
This change let RefDirectory use FileSnapshot to detect such situations.
FileSnapshot helps to remember when a file was last read from disk and
therefore enables to decide when to load a file from disk although
modification time has not changed.
Change-Id: I03b9a137af097ec69c4c5e2eaa512d2bdd7fe080
Signed-off-by: Christian Halstrick <christian.halstrick@sap.com>
Signed-off-by: Chris Aniszczyk <caniszczyk@gmail.com>
A checkout conflict during rebase setup should leave the repository
in SAFE state which means ensuring that the rebase temporary files
need to be removed.
Bug: 346813
Change-Id: If8b758fde73ed5a452a99a195a844825a03bae1a
Signed-off-by: Chris Aniszczyk <caniszczyk@gmail.com>
Change Ia2ab4f8dc95020f2914ff01c2bf3b1bc62a9d45d added merge
support for when OURS or THEIRS was simultaneously deleted
and modified. That changeset however did not add create an
entry in the conflicts table so clients would see a CONFLICTING
result but getConflicts() would return null.
This change creates a MergeResult for the conflicting file.
Bug: 345684
Change-Id: I52acb81c1729b49c9fb3e7a477c6448d8e55c317
Signed-off-by: Chris Aniszczyk <caniszczyk@gmail.com>
Change Ib9898fe0f982fa08e41f1dca9452c43de715fdb6 added support for
the 'cherry-pick' fast forward case where the upstream commit history
does not include any merge commits. This change adds support for the
case where merge commits exist and the local branch has no changes.
Bug: 344779
Change-Id: If203ce5aa1b4e5d4d7982deb621b710e71f4ee10
Signed-off-by: Chris Aniszczyk <caniszczyk@gmail.com>
Previously when merging two contents with a non-empty base and one of
the contents was empty (size == 0) and the other was modified there
was a potentially expensive calculation until we finally always come
to the same result -> the complete non-deleted content should collide
with the empty content.
This proposal adds an optimization to detect empty input content and
to produce the appropriate result immediatly.
Change-Id: Ie6a837260c19d808f0e99173f570ff96dd22acd3
Signed-off-by: Christian Halstrick <christian.halstrick@sap.com>
For the following patch on the linux 2.6.32 tag:
--- a/kernel/sched_fair.c
+++ b/kernel/sched_fair.c
@@ -685,6 +685,7 @@ static void enqueue_sleeper(struct cfs_rq *cfs_rq, struct sc
static void check_spread(struct cfs_rq *cfs_rq, struct sched_entity *se)
{
+#if 0
#ifdef CONFIG_SCHED_DEBUG
s64 d = se->vruntime - cfs_rq->min_vruntime;
@@ -694,6 +695,7 @@ static void check_spread(struct cfs_rq *cfs_rq, struct
sched
if (d > 3*sysctl_sched_latency)
schedstat_inc(cfs_rq, nr_spread_over);
#endif
+#endif
}
static void
JGit produced an incorrect diff, attempting to add a new "}" instead
of the new "#endif" at the end of the hunk. This was caused by a prior
fix for bug 328895 where we wanted to "slide" a diff down in the file
when adding a new method/function and want to show the closing curly
brace as being added after the new method, rather than added onto the
end of the prior function or method just before the insertion point.
Bug: 345956
Change-Id: I32b9e24f1e2980258b1b39dd1807919ab1c5f9b2
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
The problem occurred when the first text ends in the middle
of the last line of the other text and the first text has no
end of line.
Bug: 344975
Change-Id: I1f0dd9f8062f2148a7c1341c9122202e082ad19d
Signed-off-by: Robin Rosenberg <robin.rosenberg@dewire.com>
This makes the message look the same as in C Git (the "."):
This reverts commit <sha1>.
Change-Id: I4c254c122277b127e7b039c0d1c7f7a0d691530d
Signed-off-by: Robin Stocker <robin@nibor.org>
Since d1718a the method getHumanishName was broken on windows since
the URIish is not normalized anymore. For a path like
"C:\gitRepositories\egit" the whole path was returned instead of
"egit".
Bug: 343519
Change-Id: I95056009072b99d32f288966302d0f8188b47836
Signed-off-by: Stefan Lay <stefan.lay@sap.com>
Before this change any files in the conflicting set would
also be listed in the the other IndexDiff Sets which is
confusing. With this change a conflicting file will not
be included in any of the other sets.
Change-Id: Ife9f2652685220bcfddc1f9820423acdcd5acfdc
Signed-off-by: Chris Aniszczyk <caniszczyk@gmail.com>
Submodules are supposed to be handled by separate operations, so
we should ignore them on checkout, just like C Git does.
This fix does not add submodule support. We just try harder
to ignore them.
Bug: 343566
Change-Id: I2c5ae1024ea7bb57adf27072da6acc9643018eda
Signed-off-by: Robin Rosenberg <robin.rosenberg@dewire.com>
jgit.storage.dht is a storage provider implementation for JGit that
permits storing the Git repository in a distributed hashtable, NoSQL
system, or other database. The actual underlying storage system is
undefined, and can be plugged in by implementing 7 small interfaces:
* Database
* RepositoryIndexTable
* RepositoryTable
* RefTable
* ChunkTable
* ObjectIndexTable
* WriteBuffer
The storage provider interface tries to assume very little about the
underlying storage system, and requires only three key features:
* key -> value lookup (a hashtable is suitable)
* atomic updates on single rows
* asynchronous operations (Java's ExecutorService is easy to use)
Most NoSQL database products offer all 3 of these features in their
clients, and so does any decent network based cache system like the
open source memcache product. Relying only on key equality for data
retrevial makes it simple for the storage engine to distribute across
multiple machines. Traditional SQL systems could also be used with a
JDBC based spi implementation.
Before submitting this change I have implemented six storage systems
for the spi layer:
* Apache HBase[1]
* Apache Cassandra[2]
* Google Bigtable[3]
* an in-memory implementation for unit testing
* a JDBC implementation for SQL
* a generic cache provider that can ride on top of memcache
All six systems came in with an spi layer around 1000 lines of code to
implement the above 7 interfaces. This is a huge reduction in size
compared to prior attempts to implement a new JGit storage layer. As
this package shows, a complete JGit storage implementation is more
than 17,000 lines of fairly complex code.
A simple cache is provided in storage.dht.spi.cache. Implementers can
use CacheDatabase to wrap any other type of Database and perform fast
reads against a network based cache service, such as the open source
memcached[4]. An implementation of CacheService must be provided to
glue this spi onto the network cache.
[1] https://github.com/spearce/jgit_hbase
[2] https://github.com/spearce/jgit_cassandra
[3] http://labs.google.com/papers/bigtable.html
[4] http://memcached.org/
Change-Id: I0aa4072781f5ccc019ca421c036adff2c40c4295
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Merging into a non-master branch would result in the following message:
Merge branch 'a' into HEAD
Now the merge message is correct:
Merge branch 'a' into b
Change-Id: I488f97190e4c1711c23a7a3cbd64f8b13a87bbac
Signed-off-by: Robin Stocker <robin@nibor.org>
Duplicates cgit behaviour for merging the case where
OURS is deleted and THEIRS is modified as well as
OURS is modified and THEIRS id deleted.
Change-Id: Ia2ab4f8dc95020f2914ff01c2bf3b1bc62a9d45d
Signed-off-by: Chris Aniszczyk <caniszczyk@gmail.com>
This fix makes sure the readPipe methods drains the stderr
pipe and close the subprocess' stdin stream before reading
the process outputs.
I never managed to repeat the reported problem myself, so this
may help in diagnosing the probelm on other peoples machines.
Bug: 337533
Change-Id: I299555f09768c34d5868327e574326946ee265e1
Smart HTTP clients may request both multi_ack_detailed and no-done in
the same request to prevent the client from needing to send a "done"
line to the server in response to a server's "ACK %s ready".
For smart HTTP, this can save 1 full HTTP RPC in the fetch exchange,
improving overall latency when incrementally updating a client that
has not diverged very far from the remote repository.
Unfortuantely this capability cannot be enabled for the traditional
bi-directional connections. multi_ack_detailed has the client sending
more "have" lines at the same time that the server is creating the
"ACK %s ready" and writing out the PACK stream, resulting in some race
conditions and/or deadlock, depending on how the pipe buffers are
implemented. For very small updates, a server might actually be able
to send "ACK %s ready", then the PACK, and disconnect before the
client even finishes sending its first batch of "have" lines. This
may cause the client to fail with a broken pipe exception. To avoid
all of these potential problems, "no-done" is restricted only to the
smart HTTP variant of the protocol.
Change-Id: Ie0d0a39320202bc096fec2e97cb58e9efd061b2d
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
RefDirectory did not correctly follow the contract of RefList. The
contract says if you use add() method of RefList builder, you MUST
sort() it afterwards, and later every other method assumes that list
is properly sorted (especially the binary search in the find() and
get() methods). Instead RefDirectory class tried to scan the refs
recursively while sorting every folder in the process before
processing and did not call sort().
For example, when scanning the contents of refs/tags project1 string
is smaller than project1-*, so it will recursively go into the folder
and add these tags first and only then will add project-* ones. This
will result in a broken list (any project1-* string is less than
project1/* one, but they all appear after them in the list), that's
why binary search will fail making loose RefList and the whole local
RefMap completely unusable.
Change-Id: Ibad90017e3b2435b1396b69a22520db4b1b022bb
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
In order to run the static checks run:
mvn -P static-checks clean install
Change-Id: I14077498a04be986ded123ddbfc97da8f9bc3130
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Change-Id: I22fc46dff6cc5dfd975f6e82161d265781778cde
Signed-off-by: Stefan Lay <stefan.lay@sap.com>
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
The same as with cherry-pick, the commit message of a merge should
include a "Conflicts" section when the merge resulted in conflicts.
Change-Id: I6261dc898262322924af5ca1bef841a654b0df55
Signed-off-by: Robin Stocker <robin@nibor.org>
Add private methods which are used for reading and writing MERGE_HEAD
and CHERRY_PICK_HEAD files, as suggested in the comments on change
I947967fdc2f1d55016c95106b104c2afcc9797a1.
Change-Id: If4617a05ee57054b8b1fcba36a06a641340ecc0e
Signed-off-by: Robin Stocker <robin@nibor.org>
Add handling of CHERRY_PICK_HEAD file in .git (similar to MERGE_HEAD),
which is written in case of a conflicting cherry-pick merge.
It is used so that Repository.getRepositoryState can return the new
states CHERRY_PICKING and CHERRY_PICKING_RESOLVED. These states, as well
as CHERRY_PICK_HEAD can be used in EGit to properly show the merge tool.
Also, in case of a conflict, MERGE_MSG is written with the original
commit message and a "Conflicts" section appended. This way, the
cherry-picked message is not lost and can later be re-used in the commit
dialog.
Bug: 339092
Change-Id: I947967fdc2f1d55016c95106b104c2afcc9797a1
Signed-off-by: Robin Stocker <robin@nibor.org>
Signed-off-by: Chris Aniszczyk <caniszczyk@gmail.com>
The timeout is also used in the FetchCommand called by the
CloneCommand.
The possibility to provide a list of branches to fetch initially is a
feature offered by EGit. To implement it here is a prerequisite for
EGit to be able to use the CloneCommand.
Change-Id: I21453de22e9ca61919a7c3386fcc526024742f5f
Signed-off-by: Stefan Lay <stefan.lay@sap.com>
When no branch was specified in the clone command, HEAD pointed to a
commit after clone. Now the clone command tries to find a branch which
points to the same commit and checks out this branch.
Bug: 339354
Change-Id: Ie3844465329f213dee4a8868dbf434ac3ce23a08
Signed-off-by: Stefan Lay <stefan.lay@sap.com>
Change I61a1b45db2d60fdcc0f87373ac6fd75ac4c4a202 fixed a possible NPE
occurring for newly created repositories - but in that case a wrong
value (false = not modified) was returned.
If a current version of the index file exists (liveFile), but there is
no snapshot, this means that there have been modifications (i.e. true
has to be returned).
Change-Id: I698f78112249f9924860fc58eb7eab7afdf87eb7
Signed-off-by: Philipp Thun <philipp.thun@sap.com>
Findbugs doesn't like using implicitly initialized field in
initializer.
Change-Id: Ic1ff9011813cc02950a71df587f31ed9f8415b49
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
When a new Git instance for an exisiting git repository should be
created there are two use-cases: either the application has already a
Repository instance in hand or the application knows where the
repository resides in the filesystem. Two methods are added to
explicitly support these use-cases: wrap(Repository db) and open(File
gitDir)
Change-Id: I2970e4aa8d4602cb1298f01e5b76bf0f96c492e5
Signed-off-by: Christian Halstrick <christian.halstrick@sap.com>
When reading refs, avoid reading huge files that were put there
accidentally, but still read the top of e.g. FETCH_HEAD, which
may be longer than our limit. We're only interested in the first line
anyway.
Bug: 340880
Change-Id: I11029b9b443f22019bf80bd3dd942b48b531bc11
Signed-off-by: Carsten Pfieffer <carsten.pfeiffer@gebit.de>
Signed-off-by: Chris Aniszczyk <caniszczyk@gmail.com>
The 'Counting objects' phase of PackWriter requires good hit rates
from the DeltaBaseCache while walking trees, the deltas need to find
their bases in the cache in order to inflate in a reasonable time.
If JGit is running in a multi-threaded server, such as Gerrit Code
Review, each thread needs its own DeltaBaseCache to prevent one thread
from evicting the other thread's relevant bases. Move the cache to be
per-ObjectReader, lazily allocated when required by a PackFile.
Change-Id: If9d5ed06728e813632ae96dcfb811f4860b276e8
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
If a repository has an alternate object database, the alternate has
its references advertised as ".have" lines, which permits the client
to use these as delta base candidates when generating the pack. If
setCheckReferencedObjectsAreReachable(true) is used, these additional
have lines need to be considered in addition to the advertised refs.
Change-Id: Ie39c6696f9d3ff147ef4405cd5624f6011700ce5
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Abhishek Bhatnagar
Carsten Pfeiffer
Christian Halstrick
Kevin Sawicki
Bernard Leach
Christoph Brill
Ketan Padegaonkar
Chris Aniszczyk
Piotr Janik
Shawn O. Pearce
Robin Rosenberg
Robin Stocker
Matthias Sohn
Stefan Lay
Leonard Broman
Philipp Thun