The method uses some heuristics to obtain much better performance
than isMergeBase.
Since I wrote the relevant code in the method I approve the license
change from EPL to EDL implied by the move.
Change-Id: Ic4a7584811a2b0bf24e4f6b3eab2a7c022eabee8
Signed-off-by: Robin Rosenberg <robin.rosenberg@dewire.com>
EGit wasn't able to decorate local branches tracking another local
branch with number of commits the checked out local branch differs from
the other local branch it's tracking.
Bug: 376970
Change-Id: I74e932d5eacd74dbf6b0dffcfc65ba3222a8250e
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
On conflicts in rebase or cherry-pick, the conflict markers were like
this:
<<<<<<< OURS
a
=======
b
>>>>>>> THEIRS
This is technically correct, but it could be better.
It's especially confusing during a rebase, where the meaning of
OURS/THEIRS is not obvious. The intuition is that "ours" is the commits
that "I" did before the rebase, but it's the other way around because of
the way rebase works. See various bug reports and stackoverflow
discussions.
With this change, in the case of a cherry-pick while on master, the
markers will be like this:
<<<<<<< master
a
=======
b
>>>>>>> bad1dea Message of the commit I'm cherry-picking
In the case of a "git rebase master":
<<<<<<< Upstream, based on master
a
=======
b
>>>>>>> b161dea Message of a commit I'm rebasing
It's not "master" because that would only be correct for the first
cherry-pick during a rebase, after that, it's master + already
cherry-picked commits.
And in the case of a "git pull --rebase":
<<<<<<< Upstream, based on branch 'master' of git@example.org:repo
a
=======
b
>>>>>>> b161dea Message of a commit I'm rebasing
Bug: 336819
Change-Id: I1333a8dd170bb0077f491962013485efb6f2a926
Signed-off-by: Robin Stocker <robin@nibor.org>
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
The file location of the constructor for BlameGenerator
did not specify where the path should be relative from.
Fix BlameGenerator comments based on suggestions by Robin Stocker.
Change-Id: I3d79db2d2ba4961835fe664ae6178e0bfc97b910
In DFS, everything is stored in a pack but only objects in a pack with
source GC or UNREACHABLE_GARBAGE have had delta compression attempted.
Expose the PackSource setter and getter on DfsPackDescription in order
to implement wasDeltaAttempted.
Change-Id: Ie949f321147ad870f1c3f23b552343bbbda32152
If an object is in a pack file already, delta compression will not
attempt to re-compress it. This assumes that the previous
packing already performed the optimal compression attempt, however,
the subclasses of StoredObjectRepresentation may use other heuristics
to determine if the stored format is optimal.
Change-Id: I403de522f4b0dd2667d54f6faed621f392c07786
This change makes CheckoutCommand pass the list of modified files
through the OK result, enabling outside world to react in a smaller
scope (for example refresh only resources containing the modified
files).
Change-Id: I53c50ee09bc0d3ff501bdc25196e52e739c3f1f9
Signed-off-by: Chris Aniszczyk <zx@twitter.com>
Change-Id: I03f59d07bcc3338ef8d392cbd940799186ca03bd
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Signed-off-by: Christian Halstrick <christian.halstrick@sap.com>
Since git doesn't keep track of empty directories, they should be
created first. Test case included demonstrates that using
StashApplyCommand(). Bugfix is applied to the DirCacheCheckout class,
because StashApplyCommand() uses it internally to apply a stash.
Change-Id: Iac259229ef919f9e92e7e51a671d877172bb88a8
Signed-off-by: Jevgeni Zelenkov <jevgeni.zelenkov@gmail.com>
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
JGit allows to create commits which have duplicate parents: e.g. a
commit X has first parent Y and second parent Y. Such commits are not
handled correctly by PlotCommit leading to wrong display of the history
in EGit. In such cases there is a never ending passing line drawn beside
all commits younger than the commit with duplicate parents. This commit
fixes this by explicitly checking for duplicate parents.
In a different commit we should fix JGit not to create commits with
duplicate parents. I think native git also doesn't allow such commits,
although history display in native git (gitk, git log --graph) is not
damaged by such commits.
Change-Id: Ie3019ef613a507023958bea27b1badc3b8950279
The wordings of the two license are the same. This change is there
to make this file consistent with the LICENSE file.
Change-Id: I7c9d7a8f3622dd4099ca311af3dd032034bf56c0
Implements a garbage collector for FileRepositories. Main ideas are
copied from the garbage collector for DFS based repos
(DfsGarbageCollector). Added functionalities are
- pruning loose objects
- handling of the index
- packing refs
- handling of reflogs (objects referenced from reflog will not be
pruned/)
These are features of a GC which are not handled in this change and
which should come with subsequent changes:
- unpacking packed objects into loose objects (to support that pruning
packed objects doesn't delete them until they are older than two weeks)
- expiration of reflogs
- support for configuration parameters (e.g. gc.pruneExpire)
Change-Id: I14ea5cb7e0fd1b5c50b994fd77f4e05bfbb9d911
Signed-off-by: Christian Halstrick <christian.halstrick@sap.com>
Expose class DfsReader and method DfsPackFile.hasObject() as public.
Applications may want to be able to inquire about some details of
the storage of a repository. Make this possible by exposing some
simple accessor methods.
Expose method DfsObjDatabase.clearCache() as protected, allowing
implementing subclasses to dump the cache if necessary, and force
it to reload on a future request.
Change-Id: Ic592c82d45ace9f2fa5f8d7e4bacfdce96dea969
A configured remote url like "../repo" works with C Git.
In JGit, it only worked if Java's current working directory happened to
be the local repository working directory.
Change-Id: I33ba3f81b37d03cf17ca7ae25a90774a27e7e02b
Signed-off-by: Robin Stocker <robin@nibor.org>
Currently, after a merge/cherry-pick/rebase, all index entries are
smudged as the ResolveMerger never sets entry lengths and/or
modification times. This change teaches it to re-set them at least for
things it did not touch. The other entries are then repaired when the
index is persisted, or entries are checked out.
The first attempt to get this in was commit
3ea694c252 which has been reverted.
Since then some fixes to ResolveMerger and a few more tests have
been added which check situations where the index is not matching
HEAD before we merge.
Change-Id: I648fda30846615b3bf688c34274c6cf4bc857832
Signed-off-by: Christian Halstrick <christian.halstrick@sap.com>
Also-by: Markus Duft <markus.duft@salomon.at>
Repository.resolve can only return an ObjectId and will
continue to do so, but another method, simplify(), will
be able to return a branch name for some cases.
Previous checkouts can be specified as @{-n}, where n is an
integer speifying the n:th previous branch. The result
is the branch name, unless the checkout was a detached head,
in which case the object id is returned. Since the result
is a branch it may be followed by a references to the reflog,
such as @{-1}@{1} if necessary.
A simple expression like "master" is resolved to master in
simplify, but anything starting with refs gets resolved to
its object id, even if it is a branch.
A symbolic ref is resolved to its leaf ref, e.g. "HEAD" might
be resolved to "master".
Change-Id: Ifb815a1247ba2a3e2d9c46249c09be9d47f2b693
Currently, after a merge/cherry-pick/rebase, all index entries are
smudged as the ResolveMerger never sets entry lengths and/or
modification times. This change teaches it to re-set them at least for
things it did not touch. The other entries are then repaired when the
index is persisted, or entries are checked out.
Change-Id: I0944f2017483d32043d0d09409b13055b5609a4b
Signed-off-by: Christian Halstrick <christian.halstrick@sap.com>
Currently, update manager displays the comment message (starting with
"###...") which should not be part of the description.
Change-Id: I1c748cd5987b30f25aca3ca8eb593448bcf128ae
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
No branch before @ is interpreted as the currently checked out branch.
For detached heads it would be HEAD, but normally it is the branch
that HEAD refers to.
Change-Id: I051a1724fa390b8212e8986ba832b1347a20371e
Otherwise applying will fail with a FileNotFoundException, because
File.createNewFile() fails with missing parents.
Contains change & according test.
Change-Id: I970522b549b8bb260ca6720da11f12c57ee8a492
Signed-off-by: Chris Aniszczyk <zx@twitter.com>
It's used in DhtMissingChunkException, which is serializable.
Change-Id: I2b76bc1bc373efd44214be4598a03c62c681a200
Signed-off-by: Robin Stocker <robin@nibor.org>
An example where this is necessary is when a whole directory was deleted
and checkout is used to restore a file which was in that directory.
Bug: 372133
Change-Id: I1d45e0a5d2525fe1fdfbf08c9c5c166dd909e9fd
Signed-off-by: Robin Stocker <robin@nibor.org>
* stable-2.0:
Improve performance of persisting an index by magnitudes
Change-Id: I880f4d0be81c263b598ee24e8373c6f8cb781c51
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
When updating smudged entries use a pathfilter to iterate only over
working tree files which have an associated smudged index entry.
Commit dac66672df introduced that we
check and update smudged entries while persisting a dircache. Before
that commit adding a file to git caused file i/o for the index file,
the object database (to store new content) and all files we wanted to
add (to read new content). After that commit we have additionally file
i/o for every file in the working tree (even ignored files).
Especially on windows iterating over the working tree can be very
time consuming. This decreased the performance of persisting a dircache
dramatically (I measured factors 4 to 10 while adding a file to linux
kernel repo). One could easily see this effect when dragging&dropping
modified files in a linux kernel repo in the egit staging view.
Change-Id: I568dec77635013cf6bb46f652d3f2b89de041c82
Signed-off-by: Kevin Sawicki <kevin@github.com>
I have unfortunately introduced a few bugs in the native Git client
over the years. 1.7.5 is unable to send chunked requests correctly,
resulting in corrupt data at the server. Ban this client whenever
it uses chunked encoding with an error message.
Prior to some more recent versions, git push over HTTP failed to
report status information and error messages due to a race within
the client and its helper process. Check for these bad versions and
send errors as messages before the status report, enabling users
to see the failures on their terminal.
Change-Id: Ic62d6591cbd851d21dbb3e9b023d655eaecb0624
It was easy to create multiple packs with exactly the same name and
same DfsRepositoryDescription in a test, which can poison the
DfsBlockCache. The javadoc for DfsObjDatabase.newPack() explicitly
says pack names should be unique within an entire DFS, so do this by
making the packId AtomicInteger static.
Arguably, test writers shouldn't be doing things like putting
'new DfsRepositoryDescription("test")' in a setUp() method, but that's
a natural thing to do, and we don't document this restriction
anywhere.
Change-Id: I9477413ab3950d83b7d17e173fbc0a3e064896e3
The PackParser EOF check is incompatible with the expect data after
pack footer flag, so turn off the EOF check if the expecting data
flag is true.
Change-Id: I697ebd9e1d1eed765d00aecaef955cf978cfd0b9
This was broken in fe1f1b8f8a, which
preferred the index over the working tree when both were present.
Change-Id: I97dcf9a088adcbd0187fa7eec9ef34445ce3a981
Signed-off-by: Kevin Sawicki <kevin@github.com>
Robin Rosenberg
Matthias Sohn
Robin Stocker
Patrick Carlson
Shawn Pearce
Colby Ranger
Christian Halstrick
Markus Duft
Jevgeni Zelenkov
Shawn O. Pearce
Tomasz Zarna
Dave Borowitz
Ian Wetherbee