If setInstance(SshSessionFactory) is called with parameter null
set default session factory using the newly introduced service loader
instead of hard-coding the default factory class.
Change-Id: I86b5932333cc53b706534a2822e0fd96e12e6e47
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Use ServiceLoader and define
org.eclipse.jgit.transport.DefaultSshSessionFactory in
META-INF/services/org.eclipse.jgit.transport.SshSessionFactory so that
the legacy behavior is still the same.
Bug: 553625
Change-Id: Id1a65506140d921ed76d83699e3817f0d2ca08ed
Signed-off-by: Emmanuel Hugonnet <ehugonne@redhat.com>
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Java GC evicts all SoftReferences when the used heap size comes close to
the maximum heap size. This means peaks in heap memory consumption can
flush the complete WindowCache which was observed to have negative
impact on performance of upload-pack in Gerrit.
Hence add a boolean option core.packedGitUseStrongRefs to allow using
strong references to reference packfile pages cached in the WindowCache.
If this option is set to true Java gc can no longer flush the
WindowCache to free memory if the used heap comes close to the maximum
heap size. On the other hand this provides more predictable performance.
Bug: 553573
Change-Id: I9de406293087ab0fa61130c8e0829775762ece8d
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
* added new public method getContent()
* changed checkoutEntry() to use the new getContent() method
* changed runExternalFilterCommand() parameter "entry" to "path" to be
independent from DirCacheEntry type
* removed runExternalFilterCommand() parameter "fs" as it can be derived
from repo
Bug: 356832
Change-Id: If8991b74870e0d8728093e98a990f93f1871b76a
Signed-off-by: Andre Bossert <andre.bossert@siemens.com>
Using exceptions during normal operations - for example with the
desire of expanding an array in the failure case - can have a
severe performance impact. When exceptions are instantiated,
a stack trace is collected. Generating stack trace can be expensive.
Compared to that, checking an array for length - even if done many
times - is cheap since this is a check that can run in just a
handful of CPU cycles.
Change-Id: Ifaf10623f6a876c9faecfa44654c9296315adfcb
Signed-off-by: Patrick Hiesel <hiesel@google.com>
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Protected field ReceivePack.connectivityChecker is of type
ConnectivityChecker which was located in internal package
org.eclipse.jgit.transport and was thus leaking an internal type.
In order to fix this move ConnectivityChecker to package
org.eclipse.jgit.transport.
Change-Id: Idc0af75502faf39f13a56157bbb6964d24720eb8
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
SSLContext.getInstance("TLS") by default behaves differently on IBM
JDK than on Oracle or OpenJDK.[1] On IBM JDK one gets sockets that
have only TLSv1 enabled, which makes HTTPS connections fail since most
servers refuse this old protocol version. On Oracle JDK/OpenJDK, one
gets sockets with all available protocol versions enabled.
Explicitly enable all available TLS protocol versions to make
HTTPS connections work also on IBM JDK.
[1] https://www.ibm.com/support/knowledgecenter/en/SSYKE2_8.0.0/com.ibm.java.security.component.80.doc/security-component/jsse2Docs/matchsslcontext_tls.html#matchsslcontext_tls
Bug: 558709
Change-Id: I5ffc57a78e67a6239b9dad54840a49a8ed28930a
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Calling sh -c with a script path containing backslashes may fail since
the shell may try to process them as escape characters.
Instead of calling
sh.exe -c 'C:\path\script "$@"' 'C:\path\script' other args
call
sh.exe -c '$0 "$@"' 'C:\path\script' other args
which avoids this escape processing.
Note that this is not specific to Windows. If the path or the script
name contain backslashes, this also occurs on Unix.
Bug: 558577
Change-Id: I47d63db6f8644f956c55c42b07dbcad7d7f305aa
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
StringBuffer is synchronized which is slower and should be replaced with
StringBuilder according to its Javadoc.
Change-Id: If4d4a5a49da289ded34bbec97132ab7636b937cc
Signed-off-by: Lars Vogel <Lars.Vogel@vogella.com>
When converting to reftable format the option extensions.refStorage must
be set to "reftable" [1]. When converting back to refdir format this
config option needs to be removed.
Introduce constants for refStorage config options, also for the
"reftree" format.
[1] https://git.eclipse.org/r/plugins/gitiles/jgit/jgit/+/master/Documentation/technical/reftable.md#Version-1
Change-Id: I190222fa5edc1ad7309daa9be17ca934ff7971e3
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
and switch over strings where possible. Sometimes if statements are
chained and form a series of comparisons against constants. Using switch
statements improves readability.
Bug: 545856
Change-Id: Iacb78956ee5c20db4d793e6b668508ec67466606
Signed-off-by: Carsten Hammer <carsten.hammer@t-online.de>
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
This will change the behavior in the CLI to resemble that of C-Git more
closely by printing the stderr of the hooks to the CLI stderr
independently of the exit code of the hook.
This is also useful for the corresponding EGIT-Change, which will add
the ability to show the hook output in eclipse.
With this also the stderr can be shown even if the exit code is 0.
Bug: 553471
Change-Id: Ie7bc503fe39e270e9b93dd1108b5879f02a12b4c
Signed-off-by: Tim Neumann <Tim.Neumann@advantest.com>
This is a preparation for the corresponding EGit change to remove
redundant output in the aborted by commit hook popup.
Bug: 553469
Change-Id: Id5f39a4df659fafc9d951668e6f53fed4380de9d
Signed-off-by: Tim Neumann <Tim.Neumann@advantest.com>
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Add the following statistics
- cache hit count and hit ratio
- cache miss count and miss ratio
- count of successful and failed loads
- rate of failed loads
- load, eviction and request count
- average and total load time
Use LongAdder instead of AtomicLong to implement counters in order to
improve scalability.
Optionally expose these metrics via JMX, they are registered with the
platform MBean server if the config option jmx.WindowCacheStats = true
in the user or system level git config.
Bug: 553573
Change-Id: Ia2d5246ef69b9c2bd594a23934424bc5800774aa
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
- add missing @since tag on new field connectivityChecker
- suppress warning for this added field which may affect subclasses
which is ok
Change-Id: Id6c22258efd10fa3847290f3dcfa42893b6ae882
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Git log supports the exclude pathspec, which allows for excluding paths
from the log command. JGit only supports adding paths to the log
command. See the following StackOverflow question for details:
https://stackoverflow.com/questions/59143934/java-jgit-how-to-get-git-
commits-not-affecting-certain-directories
This commit adds an excludePath() method to the log command. It does not
yet support regex or glob wildcards.
Change-Id: I8cd59950b87850b55a15c7e2ea5470145c9aae28
Signed-off-by: John Tipper <john_tipper@hotmail.com>
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Move all connectivity check to separate classes. Set default to be
FullConnectivityChecker i.e. checker which will check connectivity
from all advertised refs. Add ability to set other connectivity
checker which can use different approach.
Signed-off-by: Demetr Starshov <dstarshov@google.com>
Change-Id: Ibb107dbfbdde8ad109be25b5ecf42be7660ef736
This method was added in stable-5.6 after 5.6 RC1 was tagged. It's shown
as an API error when using 5.6.0 RC1 as the API baseline for master.
This suppression can be removed when 5.6 is released which will serve as
the API baseline for 5.7.
Change-Id: Ic6359fe59ed2d2a9431583b0854ec86bbac76880
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
The reftable format supports fast inverse (SHA1 => ref) queries.
If the ref database does not support fast inverse queries, it may be
advantageous to build a complete SHA1 to ref map in advance for
multiple uses. To let applications decide, this function indicates
whether the inverse map is available.
Signed-off-by: Han-Wen Nienhuys <hanwen@google.com>
Change-Id: Idaf7e01075906972ec21332cade285289619c2b3
Same as UploadPack. These methods do not handle exceptions and the
caller can handle them. This makes it possible to customize the error
handling.
Change-Id: Ia5203f80133cb5b3e5d754859b4167ac920eaf14
Signed-off-by: Masaya Suzuki <masayasuzuki@google.com>
Currently, there's no way for a user to customize the error handler for
the exception happened during unpacking an incoming pack file. Create an
error handler class and let them specify one.
Change-Id: Id07638ee58c88e1365181c3ddd17ee0266f3934d
Signed-off-by: Masaya Suzuki <masayasuzuki@google.com>
Instead of dropping a second exception, use try-with-resources so that
exception thrown by a hook is attached as a suppressed exception.
This removes a need of holding an exception that is thrown while
unpacking an incoming packfile.
Change-Id: I74d8b944931abbf53d9d1ae5db2e889639fba027
Signed-off-by: Masaya Suzuki <masayasuzuki@google.com>
BaseReceivePack#sendStatusReport anyway needs to know
CAPABILITY_REPORT_STATUS. By moving this flag to BaseReceivePack,
simplify the status reporting code.
Change-Id: Iaa0878b1fc13057b687a7f01d25c85fd78c0423e
Signed-off-by: Masaya Suzuki <masayasuzuki@google.com>
This gives a chance to handle an exception for a user. For example, when
an IOException is thrown while executing
`walk.parseAny(cmd.getNewId())`, it's always handled as
REJECTED_MISSING_OBJECT. However, IOException can mean a Git storage IO
error. By introducing an error handler class, a user can add a custom
error handler for these cases.
Change-Id: I3e03a536e1d8e137cb0f6e596d71642e72adde9e
Signed-off-by: Masaya Suzuki <masayasuzuki@google.com>
Move exception handling code to the caller side. This is a preparation
for adding a custom error handler that is similar to UploadPack.
Note that `catch (Throwable t)` will not affect the exception spec since
Java will do an analysis of rethrown exceptions. See
https://docs.oracle.com/javase/8/docs/technotes/guides/language/catch-multiple.html.
Change-Id: I973a63d4b079c2cd1402afb3f2956e18b7d5a00c
Signed-off-by: Masaya Suzuki <masayasuzuki@google.com>
This removes a raw IOException at one level. Later we'll add a custom
exception handling mechanism like UploadPack.
Change-Id: I52a7423798c97b032d848351be8b6f144776b017
Signed-off-by: Masaya Suzuki <masayasuzuki@google.com>
Matthias Sohn
Emmanuel Hugonnet
Andre Bossert
Han-Wen Nienhuys
Patrick Hiesel
Thomas Wolf
Lars Vogel
Carsten Hammer
Yunjie Li
Tim Neumann
John Tipper
Demetr Starshov
David Pursehouse
Masaya Suzuki