The special characters <> and '\n' interfere with parsing of
identities. C git strips these special characters, so we should too.
Rather than allocating extra strings by calling String#trim(), add a
few lines to our sanitization method to perform the same trimming as
described in String's Javadoc.
Change-Id: I96edcb93a2fc194ee354d60566d352299742a52f
This might be somewhat surprising behavior to users who might
naturally assume the following invariant:
ident.equals(parseIdent(ident.toExternalString()))
This invariant does not hold since whitespace is only trimmed during
serialization. We don't want to mess with the strings during
initialization, as this is called during the highly-optimized commit
parsing codepath.
Change-Id: I081a603f0ac0e33167462244779b0ff3ad51e80c
We've found in Gerrit Code Review that it is common to pass around
both an ObjectReader (or more commonly a RevWalk wrapping one) and an
ObjectInserter. These code paths often assume that the ObjectReader
can read back any objects created by the ObjectInserter without
flushing. However, we previously had no way to enforce that constraint
programmatically, leading to hard-to-spot problems.
Provide a solution by exposing the ObjectInserter that created an
ObjectReader, when known. Callers can either continue passing both
objects and check:
reader.getCreatedFromInserter() == inserter
or they can just pass around ObjectReader and extract the inserter
when it's needed (checking that it's not null at usage time).
Change-Id: Ibbf5d1968b506f6b47030ab1b046ffccb47352ea
When CheckoutCommand or MergeCommand is called then not in all situation
the treewalks have been prepared to support clean/smudge filters. Fix
this
Bug: 491505
Change-Id: Iab5608049221c46d06812552ab97299e44d59e64
Such hunks are identifiable by a zero value for "new start line". Prior
to the fix, JGit throws and ArrayIndexOutOfBoundsException on such
patches.
Change-Id: I4f3deb5e5f41a08af965fcc178d678c77270cddb
Signed-off-by: Jonathan Schneider <jkschneider@gmail.com>
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Change-Id: I5b3b7b0633354d5ccf0c6c320c0df9c93fdf8eeb
Signed-off-by: Ned Twigg <ned.twigg@diffplug.com>
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
CommitCommand already provided a method to set the comment which should
be written into the reflog. The underlying RefUpdate class supported to
skip writing a reflog entry. But through the CommitCommand API it was
not possible to prevent writing a reflog entry. Fix this and allow
creating commits which don't occur in the reflog.
Change-Id: I193c53de71fb5958ea749c4bfa8360a51acc9b58
RepositoryCache has 2 methods to remove a repository from the cache but
they are never called when a repository is closed. Users of the cache
were expected to call one of those 2 methods but how could they have
called them at proper time without having visibility of the repository
usage count.
Ideally, I would have reworked the RepositoryCache to wrap any
repository it opens in a class that would be responsible to unregister
them from the cache when it's really closed, i.e. when usage counter
reaches 0. The problem preventing the wrapping solution is the
RepositoryCache.register method that allows to register an already
opened repository in the cache. Such repositories cannot be wrapped
because callers are still holding a reference on the unwrapped
repository.
Document that RepositoryCache.close method is removing the repository
from the cache as well as closing it and rework
RepositoryCache.unregister method to only remove the repository from the
cache. Use the latter to unregister repository when Repository.doClose
is getting executed.
Change-Id: Ia364816e4da8d7b6cfa72f10758ca31aa8a1f9db
Signed-off-by: Hugo Arès <hugo.ares@ericsson.com>
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Repository has a usage counter that is initialized to 1 at
instantiation and this counter is decremented when Repository.close
method is called. There is also a Repository.incrementOpen method that
RepositoryCache uses to increment the usage count when it's returning a
repository that is already opened.
The problem was that RepositoryCache was incrementing the usage count
for repositories that it just opened or registered. The usage count was
2 when it should have been 1.
Incrementing usage count is now only be done for repository that are
served from the cache.
This bug is causing slow memory increase of our Gerrit server until the
server become slow. Even if the RepositoryCache is using SoftReference,
it seems that the JVM is not garbage collecting the repositories because
it's not yet on the edge of being out of memory.
To test this change, I replicated all repositories(11k) from Gerrit
master to one slave. The Gerrit master used memory after this test was
10GB without this change and 3.5GB with.
Change-Id: I86c7b36174e384f106b51fe92f306018fd1dbdf0
Signed-off-by: Hugo Arès <hugo.ares@ericsson.com>
When checking out commits/branches JGit was triggering correctly
configured smudge filters. But when checking out paths (either from
index or from commits) JGit was not triggering smudge filters. Fix
CheckoutCommand to properly call filters.
Bug: 486560
Also-by: Pascal Krause <pascal.krausek@sap.com>
Change-Id: I5ff893054defe57ab12e201d901fe74e1376efea
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Implement the DIR_NO_GITLINKS setting with the same functionality
it provides in cGit.
Bug: 436200
Change-Id: I8304e42df2d7e8d7925f515805e075a92ff6ce28
Signed-off-by: Preben Ingvaldsen <preben@puppetlabs.com>
JGit's Garbage Collector is repacking relevant objects into new
packfiles and is afterwards deleting the now obsolete packfiles. But to
prevent problems caused by race conditions JGit was not deleting
packfiles when they are too young. The same mechanism as for loose
objects and the config parameter gc.pruneExpire was used.
But JGit was reusing the parameter gc.pruneExpire also for packfiles
which may cause a lot of filesystem consumption if gc.pruneExpire was
set to the default of 2 weeks. Only two weeks after packfile creation gc
was allowed to delete this packfile.
This change introduces a new config paramter gc.prunePackExpire with a
default of "1.hour". This parameter is used when packfiles are deleted.
Only packfiles older than the specified time can be deleted.
For loose objects the behaviour is not changed and only the old
parameter gc.pruneExpire is relevant.
Change-Id: I6209efb05678b15153bd22479dc13486907a44f8
This commit introduces a FileModeStrategy to
the FileTreeIterator class. This provides a way to
allow different modes of traversing a file tree;
for example, to control whether or not a nested
.git directory should be treated as a gitlink.
Bug: 436200
Change-Id: Ibf85defee28cdeec1e1463e596d0dcd03090dddd
Signed-off-by: Preben Ingvaldsen <preben@puppetlabs.com>
TreeWalk provides the new method getEolStreamType. This new method can
be used with EolStreamTypeUtil in order to create a wrapped InputStream
or OutputStream when reading / writing files. The implementation
implements support for the git configuration options core.crlf, core.eol
and the .gitattributes "text", "eol" and "binary"
CQ: 10896
Bug: 486563
Change-Id: Ie4f6367afc2a6aec1de56faf95120fff0339a358
Signed-off-by: Ivan Motsch <ivan.motsch@bsiag.com>
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
There's only one test method in this module and it's quite long, so
rather than using a try-with-resource and having to indent a huge
block of existing code, make the Git a member variable that gets
initialised and closed in @Before and @After annotated methods.
The methods are named 'before' and 'after' rather than the conventional
'setUp' and 'tearDown' so as not to conflict with the names of the
existing methods in LocalDiskRepositoryTestCase.
Change-Id: I5a4a9b59f244c450dbcae9fdde7d9e0f0cd24e6f
Signed-off-by: David Pursehouse <david.pursehouse@sonymobile.com>
Replace it with ByteArrayInputStream as suggested in [1].
[1] http://stackoverflow.com/a/2219543/381622
Change-Id: I5ca8d721a756a82ea5f5687a20555303eb1dfc18
Signed-off-by: David Pursehouse <david.pursehouse@sonymobile.com>
Using the assume method, instead of just returning, will cause the
test to be marked as skipped rather than passed on systems where
the precondition is not satisfied.
Change-Id: I13672371f6cd3c481a0a6247e0eaed3aac6d766e
Signed-off-by: David Pursehouse <david.pursehouse@sonymobile.com>
The variable and parameter named 'db' were hiding class members
with the same name.
Change-Id: I27017afdc5f49c38c6f5be494e7a21239ea601a7
Signed-off-by: David Pursehouse <david.pursehouse@sonymobile.com>
Also remove unnecessary nesting in test methods.
Change-Id: Id59f8403c0a7b38ebb6b3a24814257cd59ea575d
Signed-off-by: David Pursehouse <david.pursehouse@sonymobile.com>
Dave Borowitz
Christian Halstrick
Jon Schneider
Ned Twigg
Matthias Sohn
Hugo Arès
Preben Ingvaldsen
Ivan Motsch
XinTong Wang
Shawn Pearce
David Pursehouse