Open a repository for submodule entries that have a child .git
directory and use the resolved HEAD commit as the entry's id.
Change-Id: I68d6e127f018b24ee865865a2dd3011a0e21453c
Signed-off-by: Kevin Sawicki <kevin@github.com>
Though it may seem less precise, "0 months" looks bad and the reference
Git implementation also does not display "0 months"
Change-Id: I488e9c97656f9941788ae88d7c5c1562ab6c26f0
The egit history view shows the files associated with a commit by using
a PathFilter. When following renames with a FollowFilter, the PathFilter
cannot be configured anymore because the affected files are simply not
known.
Thus, it should be possible to get to know which files are renamed.
Bug: 302549
Change-Id: I4761e9f5cfb4f0ef0b0e1e38991401a1d5003bea
Besides the formats known by git-log(1) we also add "locale"
and "localelocal" that formats dates according to the user's locale.
"locale" does not translate into local timezone, while
localelocal does.
Change-Id: I1c088dcec992c107e43f6c17be4ac9ed6eb428bf
We deleted the entry if there was a file and an index
entry, but not when there was just an index entry. Now
delete the file in both cases since the missing file
just means our worktree is dirty. This affected the
implementation of reset --hard.
Bug: 347574
Change-Id: Ie66fa61303472422830f5e33614e93ad65094e5d
Since we replaced GitIndex by DirCache JGit didn't fire
IndexChangedEvents anymore. For EGit this still worked with a high
latency since its RepositoryChangeScanner which is scheduled to
run each 10 seconds fires the event in case the index changes.
This scanner is meant to detect index changes induced by a different
process e.g. by calling "git add" from native git.
When the index is changed from within the same process we should fire
the event synchronously. Compare the index checksum on write to index
checksum when index was read earlier to determine if index really
changed. Use IndexChangedListener interface to keep DirCache decoupled
from Repository.
Change-Id: Id4311f7a7859ffe8738863b3d86c83c8b5f513af
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
The checkout command was producing an inconsistent state of the index
which even confuses native git. The content sha1 of the touched index
entries was updated, but the length and the filemode was not updated.
Later in coding the index entries got automatically corrected (through
Dircache.checkoutEntry()) but the correction was after persisting the
index to disk. So, the correction was lost and we ended up with an index
where length and sha1 don't fit together.
A similar problem is fixed with "lastModified" of DircacheEntry. When
checking out a path without specifying an explicit commit (you want to
checkout what's in the index) the index was not updated regarding
lastModified. Readers of the index will think the checked-out
file is dirty because the file has a younger lastmodified then what's
in the index.
Change-Id: Ifc6d806fbf96f53c94d9ded0befcc932d943aa04
Signed-off-by: Christian Halstrick <christian.halstrick@sap.com>
Signed-off-by: Jens Baumgart <jens.baumgart@sap.com>
Bug: 355205
Change-Id: I319f09577b3e04f6c31399fe8e57e9a9ad2c8a6c
Signed-off-by: Robin Rosenberg <robin.rosenberg@dewire.com>
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
The client's use of UnionInputStream was broken when combined with a
8192 byte buffer used by PackParser. A smart HTTP client connection
always pushes in the execute stateless RPC input stream after the
data stream has ended from the remote peer. At the end of the pack,
PackParser asked to fill a 8192 byte buffer, but if only e.g. 1000
bytes remained UnionInputStream went to the next stream and asked
it for input, which triggered a new RPC, and failed because there
was nothing pending in the request buffer.
Change UnionInputStream to only return what it consumed from a
single InputStream without invoking the next InputStream, just in
case that second InputStream happens to be one of these magical
ones that generates an RPC invocation.
Change-Id: I0e51a8e6fea1647e4d2e08ac9cfc69c2945ce4cb
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Change-Id: I91c7e08c4afd2562df2226887a933d93c78a0371
Signed-off-by: Robin Rosenberg <robin.rosenberg@dewire.com>
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
If the ResetCommand should reset to a invalid ref (e.g. HEAD in a repo
whithout a single commit) it was throwing an NPE. This is fixed now by
throwing a JGitInternalExcpeption. It would be nicer if we could throw
a InvalidRefException, but this would modify our API.
Bug: 339610
Change-Id: Iffcb4f2cca9f702176471d93c3a71e5cb3e700b1
Signed-off-by: Christian Halstrick <christian.halstrick@sap.com>
Signed-off-by: Chris Aniszczyk <caniszczyk@gmail.com>
Test was added which reproduce the ClassCastException when ours or
theirs merge strategy is set to MergeCommand. Merger and MergeCommand
were updated in order to avoid exception.
Change-Id: I4c1284b4e80d82638d0677a05e5d38182526d196
Signed-off-by: Denys Digtiar <duemir@gmail.com>
Signed-off-by: Chris Aniszczyk <caniszczyk@gmail.com>
Adds method into DiffEntry class that allows to specify whether changed
trees are included in scanning result list. By default changed trees
aren't added, but in some cases having changed tree would be useful.
Also adds check for tree count in TreeWalk and when it is different from
two it will thrown an IllegalArgumentException.
This change is required by egit
I7ddb21e7ff54333dd6d7ace3209bbcf83da2b219
Change-Id: I5a680a73e1cffa18ade3402cc86008f46c1da1f1
Signed-off-by: Dariusz Luksza <dariusz@luksza.org>
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
During parsing these are used with contains(). If they are a List
type, the contains operation is not efficient. Some callers such
as UploadPack often pass a List here, so convert to Set when the
type isn't efficient for contains().
Change-Id: If948ae3bf1f46e756bd2d5db14795e12ba7a6207
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
A set of ref names like ('a/b' and 'a+b') would cause the RefDirectory
to think that the set of refs have changed because it traversed the
'a' directory in the subtree before looking at 'a+b', but it then
compared with the know refs which are sorted with 'a+b' first.
Fix this by traversing the refs tree in another order. Treat a directory
as if they ends with a '/' before deciding on the order to traverse
the refs tree.
Bug: 348834
Change-Id: I23377f8df00c7252bf27dbcfba5da193c5403917
Signed-off-by: Robin Rosenberg <robin.rosenberg@dewire.com>
Reset command should works recursively and allows reset all changed
files in given directory.
Bug: 348524
Change-Id: I441db34f226be36548c61cef77958995971498de
Signed-off-by: Dariusz Luksza <dariusz@luksza.org>
Signed-off-by: Chris Aniszczyk <caniszczyk@gmail.com>
Creation of a branch X from an annotated tag, as the starting point,
resulted into .git/refs/heads/X containing the ID of the annotated tag
instead of the ID of the tagged commit.
This fix peels the tag ref before using it as the starting point for
the newly created branch.
Bug: 340836
Change-Id: I01c7325770ecb37f5bf8ddb2a22f802466524f24
Signed-off-by: Chris Aniszczyk <caniszczyk@gmail.com>
Use the temporary file management from superclass.
Change-Id: I3042951dc21860b4b85dd72a6bf41ee7cfe2aba4
Signed-off-by: Adrian Goerler <adrian.goerler@sap.com>
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
When trying to clone into a folder that already contains a cloned
repository native git will fail with a message "fatal: destination path
'folder' already exists and is not an empty directory.". Now JGit will
also fail in this situation throwing a JGitInternalException.
The test case was provided by Tomasz Zarna.
Bug: 347852
Change-Id: If9e9919a5f92d13cf038dc470c21ee5967322dac
Also-by: Tomasz Zarna <Tomasz.Zarna@pl.ibm.com>
Signed-off-by: Adrian Goerler <adrian.goerler@sap.com>
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
If no refSpec is explicitly set, the PushCommand should first check the
remote config and then as a fallback use the current behavior.
Change-Id: I2bc648abc517b1d01b2de15d383423ace2081e72
Signed-off-by: Stefan Lay <stefan.lay@sap.com>
I had the conditions wrong here, causing the in-memory InputStream
to always appear to be at EOF.
Change-Id: I6811d6187a34eaf1fd6c5002550d631decdfc391
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Adds a git-reflog command and associated tests.
Bug: 347859
Change-Id: Iba146ac842cc9ca0be43d3381b4082c9e92bf56f
Signed-off-by: Chris Aniszczyk <caniszczyk@gmail.com>
It's useful to have ReflogEntry refactored out so it can be
used by clients via the JGit API.
Change-Id: I03044df9af9f9547777545b7c9b93bdf5f8b7cb5
Signed-off-by: Chris Aniszczyk <caniszczyk@gmail.com>
BlameGenerator digs through history and discovers the origin of each
line of some result file. BlameResult consumes the stream of regions
created by the generator and lays them out in a table for applications
to display alongside of source lines.
Applications may optionally push in the working tree copy of a file
using the push(String, byte[]) method, allowing the application to
receive accurate line annotations for the working tree version. Lines
that are uncommitted (difference between HEAD and working tree) will
show up with the description given by the application as the author,
or "Not Committed Yet" as a default string.
Applications may also run the BlameGenerator in reverse mode using the
reverse(AnyObjectId, AnyObjectId) method instead of push(). When
running in the reverse mode the generator annotates lines by the
commit they are removed in, rather than the commit they were added in.
This allows a user to discover where a line disappeared from when they
are looking at an older revision in the repository. For example:
blame --reverse 16e810b2..master -L 1080, org.eclipse.jgit.test/tst/org/eclipse/jgit/storage/file/RefDirectoryTest.java
( 1080) }
2302a6d3 (Christian Halstrick 2011-05-20 11:18:20 +0200 1081)
2302a6d3 (Christian Halstrick 2011-05-20 11:18:20 +0200 1082) /**
2302a6d3 (Christian Halstrick 2011-05-20 11:18:20 +0200 1083) * Kick the timestamp of a local file.
Above we learn that line 1080 (a closing curly brace of the prior
method) still exists in branch master, but the Javadoc comment below
it has been removed by Christian Halstrick on May 20th as part of
commit 2302a6d3. This result differs considerably from that of C
Git's blame --reverse feature. JGit tells the reader which commit
performed the delete, while C Git tells the reader the last commit
that still contained the line, leaving it an exercise to the reader
to discover the descendant that performed the removal.
This is still only a basic implementation. Quite notably it is
missing support for the smart block copy/move detection that the C
implementation of `git blame` is well known for. Despite being
incremental, the BlameGenerator can only be run once. After the
generator runs it cannot be reused. A better implementation would
support applications browsing through history efficiently.
In regards to CQ 5110, only a little of the original code survives.
CQ: 5110
Bug: 306161
Change-Id: I84b8ea4838bb7d25f4fcdd540547884704661b8f
Signed-off-by: Kevin Sawicki <kevin@github.com>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Chris Aniszczyk <caniszczyk@gmail.com>
Some servlet containers require the servlet to read the EOF marker
from the input stream before a response can be output if the stream
is using "Transfer-Encoding: chunked"... which is typical for any
sort of large push to a repository over smart HTTP.
Ensure the EOF is always read by the PackParser when it is handling
the stream, and fail fast if there is more data present than expected
since this does indicate a protocol error.
Also ensure the EOF is read by UploadPack before it starts to output
a partial response using packing progress meters.
Change-Id: I131db9dea20b2324cb7c3272a814f21296bc64bd
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Some repositories created during tests are not added to the 'toClose'
list in LocalDiskRepositoryTestCase. Therefore when the tests end
we may have open FileHandles and on Windows this may cause the
tests to fail because we can't delete those files.
This is fixed by adding the possibility to explicitly add
repositories to the list of repos which are closed automatically.
Change-Id: I1261baeef4c7d9aaedd7c34b546393bfa005bbcc
Signed-off-by: Christian Halstrick <christian.halstrick@sap.com>
When cloning into a bare repository we should not create remote
tracking branches (e.g refs/remotes/origin/testX). Branches of the
remote repository should but fetched into into branches of the same
name (e.g refs/heads/testX). Also add the noCheckout option which
would prevent checkout after fetch.
Change-Id: I5d4cc0389f3f30c53aa0065f38119af2a1430909
Signed-off-by: Christian Halstrick <christian.halstrick@sap.com>
The teardown faile on Windows because the repos were not closed.
Change-Id: I16cf5645558680029682f898386b061796948237
Signed-off-by: Robin Rosenberg <robin.rosenberg@dewire.com>
Adds a class which can be used to calculates a SHA1 of the diff
associated with a patch, similar to git patch-id.
In this version whitespace is not ignored.
Change-Id: I421d15ea905e23df543082786786841cbe3ef10d
Signed-off-by: Stefan Lay <stefan.lay@sap.com>
Signed-off-by: Chris Aniszczyk <caniszczyk@gmail.com>
Since this change may affect performance and memory consumption on every
access to a loose ref I explicitly made it a RFC to collect opinions.
Previously RefDirectory.scanRef() was not detecting an update of a
loose ref when the update didn't changed the modification time of
the backing file. RefDirectory cached loose refs and the way to detect
outdated cache entries was to compare lastmodification timestamp on the
file representing the ref. If two updates to the same ref happen faster
than the filesystem-timer granularity (for linux this is 2 seconds)
there is the possiblity that we don't detect the update.
Because of this bug EGit's PushOperationTest only works with 2 second
sleeps inside.
This change let RefDirectory use FileSnapshot to detect such situations.
FileSnapshot helps to remember when a file was last read from disk and
therefore enables to decide when to load a file from disk although
modification time has not changed.
Change-Id: I03b9a137af097ec69c4c5e2eaa512d2bdd7fe080
Signed-off-by: Christian Halstrick <christian.halstrick@sap.com>
Signed-off-by: Chris Aniszczyk <caniszczyk@gmail.com>
A checkout conflict during rebase setup should leave the repository
in SAFE state which means ensuring that the rebase temporary files
need to be removed.
Bug: 346813
Change-Id: If8b758fde73ed5a452a99a195a844825a03bae1a
Signed-off-by: Chris Aniszczyk <caniszczyk@gmail.com>
Change Ia2ab4f8dc95020f2914ff01c2bf3b1bc62a9d45d added merge
support for when OURS or THEIRS was simultaneously deleted
and modified. That changeset however did not add create an
entry in the conflicts table so clients would see a CONFLICTING
result but getConflicts() would return null.
This change creates a MergeResult for the conflicting file.
Bug: 345684
Change-Id: I52acb81c1729b49c9fb3e7a477c6448d8e55c317
Signed-off-by: Chris Aniszczyk <caniszczyk@gmail.com>
Kevin Sawicki
Robin Rosenberg
Carsten Pfeiffer
Matthias Sohn
Christian Halstrick
Shawn O. Pearce
Tomasz Zarna
Denys Digtiar
Ketan Padegaonkar
Dariusz Luksza
Sasa Zivkov
Adrian Goerler
Stefan Lay
Chris Aniszczyk
Marc Strapetz
Abhishek Bhatnagar
Bernard Leach