Using the batch cleanup operation via Source -> Cleanup -> "Use lambdas
where possible" from standard JDT.
Change-Id: I5452bd94fdccc920ade071228aeed3a8b9fdbe62
Signed-off-by: Lars Vogel <Lars.Vogel@vogella.com>
Commit 6216b0de changed the behavior of the setMirror(),
setCloneAllBranches(), and setBranchesToClone() operations. Before
that commit, these could be set and reset independently and only in
call() it would be determined what exactly to do. Since that commit,
the last of these calls would determine the operation. This means
that the sequence
cloneCommand.setCloneAllBranches(true);
cloneCommand.setBranchesToClone(/* some list of refs */);
would formerly do a "clone all" giving a fetch refspec with wildcards
+refs/heads/*:refs/remotes/origin/*
which picks up new upstream branches, whereas since commit 6216b0de
individual non-wildcard fetch refspecs would be generated and new
upstream branches would not be fetched anymore.
Undo this behavioral change. Make the operations independently settable
and resettable again, and determine the exact operation only in call():
mirror=true > cloneAll=true > specific refs, where ">" means "takes
precedence over", and if none is set assume cloneAll=true.
Note that mirror=true implies setBare(true).
Bug: 559796
Change-Id: I7162b60e99de5e3e512bf27ff4113f554c94f5a6
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
When fetching remote objects, WalkFetchConnection searches remote
packs in the order provided by WalkRemoteObjectDatabase:getPackNames.
Previously, for TransportAmazonS3, the packs were in no particular
order. This resulted in potential many extra calls to get pack idx
files.
This change modifies TransportAmazonS3 and AmazonS3 so that
getPackNames returns a list sorted with the most recently modified
packs first. In the case of fetching recent changes to a repo,
this dramatically reduces the number of packs searched and speeds
up fetch.
Note: WalkRemoteObjectDatabase::getPackNames does not specify
the order of the returned names.
Testing: did "mvn clean install" in root dir and all tests passed.
And manually constructed some S3 repos and using jgit.sh
confirmed that the freshest pack was checked first.
Change-Id: I3b968fee825e793be55566e28c2d69d0cbe53807
Signed-off-by: Joshua Redstone <redstone@gmail.com>
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
The externalized error message added in f4fc640 ("BasePackConnection:
Check for expected length of ref advertisement", Dec 18, 2019) uses a
malformed string format. Since there is only one formatting argument,
it should be referenced with '{0}' rather than '{1}'.
Change-Id: Ibda864dfb0bb902fe07ae4bba73117b212046e8a
Signed-off-by: David Pursehouse <david.pursehouse@gmail.com>
Since ObjectDatabase and PackFile don't know their repository use the
packfile's grand-grand-parent directory as an identifier for the
repository the packfile resides in.
Remove metric for a repository if the number of cached bytes for the
repository drops to 0 in order to ensure the map of cached bytes per
repository doesn't contain repositories which have no data cached in the
WindowCache.
Change-Id: I969ab8029db0a292e7585cbb36ca0baa797da20b
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
The default threads from the ForkJoinPool run without any privileges
when a SecurityManager is installed, leading to SecurityExceptions
when trying to create the probe file even if the application otherwise
has write privileges in the directory.
Use a dedicated ThreadPoolExecutor using daemon threads instead.
Bug: 551690
Change-Id: Id5376f09f0d7da5ceea367e1f0dfc70f823d62d3
Signed-off-by: Alex Jitianu <alex_jitianu@sync.ro>
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
Enable UnusedException at ERROR level which causes the build to fail
in many places with:
[UnusedException] This catch block catches an symbol and re-throws
another, but swallows the caught symbol rather than setting it as a
cause. This can make debugging harder.
Fix it by setting the caught exception as cause on the subsequently
thrown exception.
Note: The grammatically incorrect error message is copy-pasted as-is
from the version of ErrorProne currently used in Bazel; it has been
fixed by [1] in the latest version.
[1] https://github.com/google/error-prone/commit/d57a39c
Change-Id: I11ed38243091fc12f64f1b2db404ba3f1d2e98b5
Signed-off-by: David Pursehouse <david.pursehouse@gmail.com>
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
If setInstance(SshSessionFactory) is called with parameter null
set default session factory using the newly introduced service loader
instead of hard-coding the default factory class.
Change-Id: I86b5932333cc53b706534a2822e0fd96e12e6e47
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Use ServiceLoader and define
org.eclipse.jgit.transport.DefaultSshSessionFactory in
META-INF/services/org.eclipse.jgit.transport.SshSessionFactory so that
the legacy behavior is still the same.
Bug: 553625
Change-Id: Id1a65506140d921ed76d83699e3817f0d2ca08ed
Signed-off-by: Emmanuel Hugonnet <ehugonne@redhat.com>
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Java GC evicts all SoftReferences when the used heap size comes close to
the maximum heap size. This means peaks in heap memory consumption can
flush the complete WindowCache which was observed to have negative
impact on performance of upload-pack in Gerrit.
Hence add a boolean option core.packedGitUseStrongRefs to allow using
strong references to reference packfile pages cached in the WindowCache.
If this option is set to true Java gc can no longer flush the
WindowCache to free memory if the used heap comes close to the maximum
heap size. On the other hand this provides more predictable performance.
Bug: 553573
Change-Id: I9de406293087ab0fa61130c8e0829775762ece8d
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
* added new public method getContent()
* changed checkoutEntry() to use the new getContent() method
* changed runExternalFilterCommand() parameter "entry" to "path" to be
independent from DirCacheEntry type
* removed runExternalFilterCommand() parameter "fs" as it can be derived
from repo
Bug: 356832
Change-Id: If8991b74870e0d8728093e98a990f93f1871b76a
Signed-off-by: Andre Bossert <andre.bossert@siemens.com>
Using exceptions during normal operations - for example with the
desire of expanding an array in the failure case - can have a
severe performance impact. When exceptions are instantiated,
a stack trace is collected. Generating stack trace can be expensive.
Compared to that, checking an array for length - even if done many
times - is cheap since this is a check that can run in just a
handful of CPU cycles.
Change-Id: Ifaf10623f6a876c9faecfa44654c9296315adfcb
Signed-off-by: Patrick Hiesel <hiesel@google.com>
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Protected field ReceivePack.connectivityChecker is of type
ConnectivityChecker which was located in internal package
org.eclipse.jgit.transport and was thus leaking an internal type.
In order to fix this move ConnectivityChecker to package
org.eclipse.jgit.transport.
Change-Id: Idc0af75502faf39f13a56157bbb6964d24720eb8
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
SSLContext.getInstance("TLS") by default behaves differently on IBM
JDK than on Oracle or OpenJDK.[1] On IBM JDK one gets sockets that
have only TLSv1 enabled, which makes HTTPS connections fail since most
servers refuse this old protocol version. On Oracle JDK/OpenJDK, one
gets sockets with all available protocol versions enabled.
Explicitly enable all available TLS protocol versions to make
HTTPS connections work also on IBM JDK.
[1] https://www.ibm.com/support/knowledgecenter/en/SSYKE2_8.0.0/com.ibm.java.security.component.80.doc/security-component/jsse2Docs/matchsslcontext_tls.html#matchsslcontext_tls
Bug: 558709
Change-Id: I5ffc57a78e67a6239b9dad54840a49a8ed28930a
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Calling sh -c with a script path containing backslashes may fail since
the shell may try to process them as escape characters.
Instead of calling
sh.exe -c 'C:\path\script "$@"' 'C:\path\script' other args
call
sh.exe -c '$0 "$@"' 'C:\path\script' other args
which avoids this escape processing.
Note that this is not specific to Windows. If the path or the script
name contain backslashes, this also occurs on Unix.
Bug: 558577
Change-Id: I47d63db6f8644f956c55c42b07dbcad7d7f305aa
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
StringBuffer is synchronized which is slower and should be replaced with
StringBuilder according to its Javadoc.
Change-Id: If4d4a5a49da289ded34bbec97132ab7636b937cc
Signed-off-by: Lars Vogel <Lars.Vogel@vogella.com>
When converting to reftable format the option extensions.refStorage must
be set to "reftable" [1]. When converting back to refdir format this
config option needs to be removed.
Introduce constants for refStorage config options, also for the
"reftree" format.
[1] https://git.eclipse.org/r/plugins/gitiles/jgit/jgit/+/master/Documentation/technical/reftable.md#Version-1
Change-Id: I190222fa5edc1ad7309daa9be17ca934ff7971e3
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
and switch over strings where possible. Sometimes if statements are
chained and form a series of comparisons against constants. Using switch
statements improves readability.
Bug: 545856
Change-Id: Iacb78956ee5c20db4d793e6b668508ec67466606
Signed-off-by: Carsten Hammer <carsten.hammer@t-online.de>
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
This will change the behavior in the CLI to resemble that of C-Git more
closely by printing the stderr of the hooks to the CLI stderr
independently of the exit code of the hook.
This is also useful for the corresponding EGIT-Change, which will add
the ability to show the hook output in eclipse.
With this also the stderr can be shown even if the exit code is 0.
Bug: 553471
Change-Id: Ie7bc503fe39e270e9b93dd1108b5879f02a12b4c
Signed-off-by: Tim Neumann <Tim.Neumann@advantest.com>
This is a preparation for the corresponding EGit change to remove
redundant output in the aborted by commit hook popup.
Bug: 553469
Change-Id: Id5f39a4df659fafc9d951668e6f53fed4380de9d
Signed-off-by: Tim Neumann <Tim.Neumann@advantest.com>
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Add the following statistics
- cache hit count and hit ratio
- cache miss count and miss ratio
- count of successful and failed loads
- rate of failed loads
- load, eviction and request count
- average and total load time
Use LongAdder instead of AtomicLong to implement counters in order to
improve scalability.
Optionally expose these metrics via JMX, they are registered with the
platform MBean server if the config option jmx.WindowCacheStats = true
in the user or system level git config.
Bug: 553573
Change-Id: Ia2d5246ef69b9c2bd594a23934424bc5800774aa
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
- add missing @since tag on new field connectivityChecker
- suppress warning for this added field which may affect subclasses
which is ok
Change-Id: Id6c22258efd10fa3847290f3dcfa42893b6ae882
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Git log supports the exclude pathspec, which allows for excluding paths
from the log command. JGit only supports adding paths to the log
command. See the following StackOverflow question for details:
https://stackoverflow.com/questions/59143934/java-jgit-how-to-get-git-
commits-not-affecting-certain-directories
This commit adds an excludePath() method to the log command. It does not
yet support regex or glob wildcards.
Change-Id: I8cd59950b87850b55a15c7e2ea5470145c9aae28
Signed-off-by: John Tipper <john_tipper@hotmail.com>
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Move all connectivity check to separate classes. Set default to be
FullConnectivityChecker i.e. checker which will check connectivity
from all advertised refs. Add ability to set other connectivity
checker which can use different approach.
Signed-off-by: Demetr Starshov <dstarshov@google.com>
Change-Id: Ibb107dbfbdde8ad109be25b5ecf42be7660ef736
This method was added in stable-5.6 after 5.6 RC1 was tagged. It's shown
as an API error when using 5.6.0 RC1 as the API baseline for master.
This suppression can be removed when 5.6 is released which will serve as
the API baseline for 5.7.
Change-Id: Ic6359fe59ed2d2a9431583b0854ec86bbac76880
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
The reftable format supports fast inverse (SHA1 => ref) queries.
If the ref database does not support fast inverse queries, it may be
advantageous to build a complete SHA1 to ref map in advance for
multiple uses. To let applications decide, this function indicates
whether the inverse map is available.
Signed-off-by: Han-Wen Nienhuys <hanwen@google.com>
Change-Id: Idaf7e01075906972ec21332cade285289619c2b3
Han-Wen Nienhuys
Lars Vogel
Thomas Wolf
Joshua Redstone
David Pursehouse
Matthias Sohn
Alex Jitianu
Emmanuel Hugonnet
Andre Bossert
Patrick Hiesel
Carsten Hammer
Yunjie Li
Tim Neumann
John Tipper
Demetr Starshov