This may be used by e.g. a custom reflog implementation to record
this information along with the ref update.
Change-Id: I44adbfad704b76f9c1beced6e1ce82eaf71410d2
These differ subtly from a PersonIdent, because they can contain
anything that is a valid User ID passed to gpg --local-user. Upstream
git push --signed will just take the configuration value from
user.signingkey and pass that verbatim in both --local-user and the
pusher field of the certificate. This does not necessarily contain an
email address, which means the parsing implementation ends up being
substantially different from RawParseUtils.parsePersonIdent.
Nonetheless, we try hard to match PersonIdent behavior in
questionable cases.
Change-Id: I37714ce7372ccf554b24ddbff56aa61f0b19cbae
The signature is intended to be passed to a verification library such
as Bouncy Castle, which expects these lines to be present in order to
parse the signature.
Change-Id: I22097bead2746da5fc53419f79761cafd5c31c3b
This is the subclass of IOException already thrown by
BaseReceivePack#recvCommands when encountering an invalid value on
the wire. That's what PushCertificateParser is doing too, so use the
same subclass.
Change-Id: I1d323909ffe70757ea56e511556080695b1a0c11
The default behavior is to read a repository's signed push
configuration from that repo's config file, but this is not very
flexible when it comes to managing groups of repositories (e.g. with
Gerrit). Allow callers to override the configuration using a POJO.
Change-Id: Ib8f33e75daa0b2fbd000a2c4558c01c014ab1ce5
Add a missing continues to prevent falling through to the command
parsing section. The first continue happens when the command list is
empty, so change the condition to see whether we have read the first
line, rather than any commands.
Fix comparison to BEGIN_SIGNATURE to use raw line with newline.
Change-Id: If3d92f5ceade8ba7605847a4b2bc55ff17d119ac
a85e817d is a slightly breaking API change to classes that were
technically public and technically released in 4.0. However, it is
highly unlikely that people were actually depending on public behavior,
since there were no public methods to create PushCertificates with
anything other than null field values, or a PushCertificateParser that
did anything other than infinite loop or throw exceptions when reading.
Change-Id: I1d0ba9ea0a347e8ff5a0f4af169d9bb18c5838d2
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
UploadPackLogger is incorrectly named--it can be used to trigger any
post upload action, such as GC/compaction. This change introduces
PostUploadHook/PostUploadHookChain to replace
UploadPackLogger/UploadPackLoggerChain and deprecates the latter.
It also introduces PackStatistics as a replacement for
PackWriter.Statistics, since the latter is not public API.
It changes PackWriter to use PackStatistics and reimplements
PackWriter.Statistics to delegate to PackStatistics.
Change-Id: Ic51df1613e471f568ffee25ae67e118425b38986
Signed-off-by: Terry Parker <tparker@google.com>
This method is documented to take a branch name (not a possibly null
string). The only way a caller could have set null without either
re-setting to a sane value afterward or producing NullPointerException
was to also call setNoCheckout(true), in which case there would have
been no reason to set the branch in the first place.
Make setBranch(null) request the default behavior (remote's default
branch) instead, imitating C git's clone --no-branch.
Change-Id: I960e7046b8d5b5bc75c7f3688f3a075d3a951b00
Signed-off-by: Jonathan Nieder <jrn@google.com>
A non-bare clone command with null remote produces a
NullPointerException when trying to produce a refspec to fetch against.
In a bare repository, a null remote name is accepted by mistake,
producing a configuration with items like 'remote.url' instead of
'remote.<remote>.url'. This was never meant to work.
Instead, let's make setRemote(null) undo any previous setRemote calls
and re-set the remote name to DEFAULT_REMOTE, imitating C git clone's
--no-origin option.
While we're here, add some tests for setRemote working normally.
Change-Id: I76f502da5e677df501d3ef387e7f61f42a7ca238
Signed-off-by: Jonathan Nieder <jrn@google.com>
call() throws InvalidRemoteException if uri == null, so there should
never be reason to leave the URI set to null. Document this.
Change-Id: I7f2cdbe8042d99cf8a3c1a8c4c2dcb58c5b8c305
Signed-off-by: Jonathan Nieder <jrn@google.com>
These commands' monitor fields can never be null unless someone passes
null to setProgressMonitor. Anyone passing null probably meant to
disable the ProgressMonitor, so do that (by falling back to
NullProgressMonitor.INSTANCE) instead of saving a null and eventually
producing NullPointerException.
Change-Id: I63ad93ea8ad669fd333a5fd40880e7583ba24827
Signed-off-by: Jonathan Nieder <jrn@google.com>
A project's name attribute is required according to repo's
doc/manifest-format.txt:
<!ELEMENT project (annotation*,
project*)>
<!ATTLIST project name CDATA #REQUIRED>
Enforcing this in code makes reading easier (in particular making it
clearer that getName() and getPath() can never return null).
Change-Id: I8c7014dd6042183d7fecb2202af5acdc384aa8e4
Signed-off-by: Jonathan Nieder <jrn@google.com>
- Consistently return structured data, such as actual ReceiveCommands,
which is more useful for callers that are doing things other than
verifying the signature, e.g. recording the set of commands.
- Store the certificate version field, as this is required to be part
of the signed payload.
- Add a toText() method to recreate the actual payload for signature
verification. This requires keeping track of the un-chomped command
strings from the original protocol stream.
- Separate the parser from the certificate itself, so the actual
PushCertificate object can be immutable. Make a fair attempt at deep
immutability, but this is not possible with the current mutable
ReceiveCommand structure.
- Use more detailed error messages that don't involve NON-NLS strings.
- Document null return values more thoroughly. Instead of having the
undocumented behavior of throwing NPE from certain methods if they
are not first guarded by enabled(), eliminate enabled() and return
null from those methods.
- Add tests for parsing a push cert from a section of pkt-line stream
using a real live stream captured with Wireshark (which, it should
be noted, uncovered several simply incorrect statements in C git's
Documentation/technical/pack-protocol.txt).
This is a slightly breaking API change to classes that were
technically public and technically released in 4.0. However, it is
highly unlikely that people were actually depending on public
behavior, since there were no public methods to create
PushCertificates with anything other than null field values, or a
PushCertificateParser that did anything other than infinite loop or
throw exceptions when reading.
Change-Id: I5382193347a8eb1811032d9b32af9651871372d0
C git's receive-pack.c strips trailing newlines in command lists when
present[1], although send-pack.c does not send them, at least in the
case of command lists[2]. Change JGit to match this behavior.
Add tests.
This also fixes parsing of commands in the push cert, which, unlike
commands sent in the non-push case, always have trailing newlines.
[1] 7974889a05/builtin/receive-pack.c (L1380)
where packet_read_line chomps newlines:
7974889a05/pkt-line.c (L202)
[2] 7974889a05/send-pack.c (L470)
Change-Id: I4bca6342a7482a53c9a5815a94b3c181a479d04b
The new submodule layout where GITDIR of a submodule is located at
<parent-repo-GITDIR>/modules/<submodule-path> was only used during
clone. Teach SubmoduleAddCommand to use the new layout.
Bug: 469666
Change-Id: Ie97dc0607b71499560444616f362bccee9cce515
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Most relative-URL tests for SubmoduleInitCommand carry out the following
steps:
1. add a submodule at path "sub" to the index
2. set remote.origin.url in .git/config
3. configure .gitmodules, possibly using relative URLs, and see what
happens
resolveWorkingDirectoryRelativeUrl() is meant to test the fallback when
remote.origin.url is not set, to match C git which treats the URL as
relative to the cwd in that case. To do so, in step (2) it sets
remote.origin.url to null.
However, Config.setString when taking a null value does not actually
unset that value from the configuration --- it sets it to the empty
string. This means we are testing a behavior that C git never
supported. Use Config.unset instead.
Change-Id: I7af29fbbd333a2598843d62c320093c48b2ad972
Signed-off-by: Jonathan Nieder <jrn@google.com>
* changes:
Allow setting detail message and cause when constructing most exceptions
Use message from ServiceNotAuthorizedException, ServiceNotEnabledException
dumb HTTP: Clarify AsIsFilter by introducing req and res locals
Clarify description of ServiceNotAuthorizedException
Move ObjectCountCallback and WriteAbortedException to package
org.eclipse.jgit.transport, so that they'll become public API.
Change-Id: I95e3cfaa49f3f7371e794d5c253cf6981f87cae0
Signed-off-by: Yuxuan 'fishy' Wang <fishywang@google.com>
This reverts commit 96eb3ee397, which
broke Gerrit tests that set a config value to 'null', serialize the
result, deserialize, and expect 'null' from Config.getString[1].
The intent of that commit was to make it possible to distinguish between
an absent and an empty config value, which we'll have to do with a new
method.
Revert the behavior change. Keep the tests from 428cb23f2de8, since
they test the behavior more precisely than the old tests did.
[1] https://gerrit-review.googlesource.com/68452
Change-Id: Ie8042f380ea0e34e3203e1991aa0feb2e6e44641
Signed-off-by: Jonathan Nieder <jrn@google.com>
Added callback in PackWriter and BundleWriter for the caller to get the
count of objects to write, and a chance to abort the write operation.
Change-Id: I1baeedcc6946b1093652de4a707fe597a577e526
Signed-off-by: Yuxuan 'fishy' Wang <fishywang@google.com>
C git 2.5 supports setting the equivalent of
RequestPolicy.REACHABLE_COMMIT with uploadpack.allowreachablesha1inwant.
Parse this into TransportConfig and use it from UploadPack. An explicitly
set RequestPolicy overrides the config, and the policy may still be
upgraded on a unidirectional connection to avoid races.
Change-Id: Id39771a6e42d8082099acde11249306828a053c0
Signed-off-by: Fredrik Medley <fredrik.medley@gmail.com>
Change-Id: I351cee0ba2e77e3360846ac0c5368da3a322725c
Reported-by: Markus Keller <markus_keller@ch.ibm.com>
Signed-off-by: Jonathan Nieder <jrn@google.com>
exactRef(ref1, ref2, ref3) requests multiple specific refs in a single
lookup, which may be faster in some backends than looking them up one by
one.
firstExactRef generalizes getRef by finding the first existing ref from
the list of refs named. Its main purpose is for the default
implementation of getRef (finding the first existing ref in a search
path). Hopefully it can be useful for other operations that look for
refs in a search path (e.g., git log --notes=<name>), too.
Change-Id: I5c6fcf1d3920f6968b8b97f3d4c3a267258c4b86
Signed-off-by: Jonathan Nieder <jrn@google.com>
Unlike getRef(name), the new exactRef method does not walk the search
path. This should produce a less confusing result than getRef when the
exact ref name is known: it will not try to resolve refs/foo/bar to
refs/heads/refs/foo/bar even when refs/foo/bar does not exist.
It can be faster than both getRefs(ALL).get(name) and getRef(name)
because it only needs to examine a single ref.
A follow-up change will introduce a findRef synonym to getRef and
deprecate getRef to make the choice a caller is making more obvious
(exactRef or findRef, with the same semantics as getRefs(ALL).get and
getRefs(ALL).findRef).
Change-Id: If1bd09bcfc9919e7976a4d77f13184ea58dcda52
Signed-off-by: Jonathan Nieder <jrn@google.com>
Dave Borowitz
Matthias Sohn
Terry Parker
Shawn Pearce
Jonathan Nieder
Christian Halstrick
Yuxuan 'fishy' Wang
Fredrik Medley