The ref points to an ObjectId that then is translated into a RevCommit.
This translation can be costly and with the incremental reachability
check is probably not needed for most of the elements.
Delay the translation from ObjectId to RevCommit to when it is needed.
Use Streams, that have the laziness built-in, all the way from Ref to
RevCommit.
This should reduce the latency for reachability checks over big sets of
references.
Change-Id: I28693087321b2beff3eaa1f3d2e7840ab0eedc6d
Signed-off-by: Ivan Frade <ifrade@google.com>
Preparatory change. Converting ObjectIds to RevCommits is potentially
expensive and in the incremental reachability check, it is probably not
required for all elements in the collection.
Pass a Stream to the reachability checker. In the follow up we make
the conversion from ObjectId to RevCommit in the stream (i.e. on
demand). This should reduce the latency of reachability checks over big
sets of references.
Change-Id: I9f310e331de5b0bf8de34143bd7dcd34316d2fba
Signed-off-by: Ivan Frade <ifrade@google.com>
Reftable is a binary, block-based storage format for the ref-database.
It provides several advantages over the traditional packed + loose
storage format:
* O(1) write performance, even for deletions and transactions.
* atomic updates to the ref database.
* O(log N) lookup and prefix scans
* free from restrictions imposed by the file system: it is
case-sensitive even on case-insensitive file systems, and has
no inherent limitations for directory/file conflicts
* prefix compression reduces space usage for repetitive ref names,
such as gerrit's refs/changes/xx/xxxxx format.
FileReftableDatabase is based on FileReftableStack, which does
compactions inline. This is simple, and has good median performance,
but every so often it will rewrite the entire ref database.
For testing, a FileReftableTest (mirroring RefUpdateTest) is added to
check for Reftable specific behavior. This must be done separately, as
reflogs have different semantics.
Add a reftable flavor of BatchRefUpdateTest.
Add a FileReftableStackTest to exercise compaction.
Add FileRepository#convertToReftable so existing testdata can be
reused.
CQ: 21007
Change-Id: I1837f268e91c6b446cb0155061727dbaccb714b8
Signed-off-by: Han-Wen Nienhuys <hanwen@google.com>
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Prevent adding a null parent to a commit's parent array. Doing so
can cause NPEs later on.
Bug: 552160
Change-Id: Ib24b7b9b7b08e0b6f246006b4a4cade7eeb830b9
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
core.quotePath = false means that "bytes higher than 0x80 are not
considered "unusal" anymore"[1], i.e., they are not escaped. In
essence this preserves non-ASCII characters in path names in output.
Note that control characters and other special characters in the
ASCII range will still be escaped.
Add a new QuotedString.GIT_PATH_MINIMAL singleton implementing this.
Change the normal GIT_PATH algorithm to use bytes instead of characters
so it can be re-used. Provide a setter in DiffFormatter for the quoting
style so that an application can override the default, which is the
setting from the git config (and by default "true"). Use the new
QuotedString.GIT_PATH_MINIMAL when core.quotePath == false.
[1] https://git-scm.com/docs/git-config#Documentation/git-config.txt-corequotePath
Bug: 552467
Change-Id: Ifcb233e7d10676333bf42011e32d01a4e1138059
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
IndexDiff would apply ignore mode ALL from .gitmodules to all remaining
submodules, and would ignore other settings from .gitignore and always
apply the setting defined on the IndexDiff instead. Correct that.
In canonical git the ignore setting from .gitmodules can also be
overridden by .git/config.[1] Implement that override in SubmoduleWalk.
[1] https://git-scm.com/docs/gitmodules#Documentation/gitmodules.txt-submoduleltnamegtignore
Bug: 521613
Change-Id: I9199fd447e41c7838924856dce40678370b66395
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
Move the BaseReceivePack implementation back into ReceivePack. This is a
backward-incompatible change. For example, BaseReceivePack.FirstLine no
longer exists and cannot be referenced. However, most of the code
should just work by replacing BaseReceivePack with ReceivePack.
Although this is an API change, it only affects callers using JGit as a
server, and there are very few of those in the wild.
Change-Id: I1ce92869435d5eebb7d671be44561e69c6233134
Signed-off-by: Masaya Suzuki <masayasuzuki@google.com>
This avoids polluting hand-crafted user level config with
auto-configured options which might disturb in environments where
the user level config is replicated between different machines.
Add a jgit config as parent of the system level config. Persist
measured timestamp resolutions always in this jgit config and read it
via the user global config. This has the effect that auto-configured
timestamp resolution will be used by default and can be overridden in
either the system level or user level config.
Store the jgit config under the XDG_CONFIG_HOME directory following the
XDG base directory specification [1] in order to ensure that we have
write permissions to persist the file. This has the effect that each OS
user will use its jgit config since they typically use different
XDG_CONFIG_HOME directories.
If the environment variable XDG_CONFIG_HOME is defined the jgit config
file is located at $XDG_CONFIG_HOME/jgit/config otherwise the default is
~/.config/jgit/config.
If you want to avoid redundant measurement for different OS users
manually copy the values measured and auto-configured for one OS user to
the system level git config.
[1] https://wiki.archlinux.org/index.php/XDG_Base_Directory
Bug: 551850
Change-Id: I0022bd40ae62f82e5b964c2ea25822eb55d94687
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
A merge may write files to the working tree. After a successful
merge one must fire a WorkingTreeModifiedEvent explicitly if
getModifiedFiles() is not empty.
Also, any touched files must be reported by the
WorkingTreeModifiedEvent fired by DirCacheCheckout.checkout().
Bug: 552636
Change-Id: I5fab8279ed8be8a4ae34cddfa726836b9277aea6
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
MergedReftableTest#scanDuplicates tests whether we can write duplicate
keys in a merged reftable. Apparently, the first key appearing should
get precedence, and this works because the sort() algorithm on ordered
collections is stable.
This is potentially confusing behavior, because you can write data
into the table that cannot be retrieved (Merged table can only have
one entry per key), and the APIs such as exactRef() only return a
single value.
Make this consistent with behavior introduced in I04f55c481 "reftable:
enforce ordering for ref and log writes" by considering a duplicate key
in sortAndWriteRefs as a fatal runtime error.
Change-Id: I1eedd18f028180069f78c5c467169dcfe1521157
Signed-off-by: Han-Wen Nienhuys <hanwen@google.com>
Some URLs cannot be converted via URL.toURI(). So don't convert
the full URL but only the bits that are needed to find a proxy
via java.net.ProxySelector.
Bug: 549690
Change-Id: I55b5ecee70c6b52f72f9bdba9ce552fde7f33976
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
Instead of just looking for a substring match of user.signingKey
in a key's user ID implement the GPG matching formats[1] for:
'=' Full exact match
'<' Full exact match of the e-mail address
'@' Substring match within the e-mail address only
'*' General case-insensitive substring match (default)
When user.signingKey is not set, the committer's e-mail address is
used by default. In that case, use '<', i.e., require an exact match
on the OpenPGP e-mail address.
Also handle the optional "0x" prefix for (partial) key fingerprints.
[1] https://www.gnupg.org/documentation/manuals/gnupg/Specify-a-User-ID.html
Bug: 550335
Change-Id: I6ce482a099ff1a0dc9de45435cd4d3ec5b504f12
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
TreeRevFilterTest uses an unncessarily complicated TreeFilter - an
AndTreeFilter - when it should be as simple as possible because this
class tests TreeRevFilter, not AndTreeFilter. Replace the filter with a
simpler one.
Change-Id: I3256a65f6e0042d32fd76a9224b79a835674ff3a
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Support the core.hooksPath git config. This can be an absolute or
relative path of a directory where to find git hooks; a relative
path is resolved relative to the directory the hook will run in.
Bug: 500266
Change-Id: I671999a6386a837e897c31718583c91d8035f3ba
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
This doesn't yet ensure that _all_ repositories are closed. It only
handles the obvious, local, and easy cases.
Change-Id: I0f9f8607791f0f03ed1f5ad71e9595e78b78892f
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
This comment was probably copied from testCloneRepositoryWithBranch() to
testBareCloneRepositoryOnlyOneBranch() where it doesn't make sense.
Hence remove it.
Change-Id: I846debd084dd77fd473c3602a799f195a8390f77
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Since [1] the gerrit project includes jgit as a submodule, and has this
warning enabled, resulting in 100s of warnings in the console.
Also enable the warning here, and fix them.
At the same time, add missing braces around adjacent and nearby one-line
blocks.
[1] https://gerrit-review.googlesource.com/c/gerrit/+/227897
Change-Id: I81df3fc7ed6eedf6874ce1a3bedfa727a1897e4c
Signed-off-by: David Pursehouse <david.pursehouse@gmail.com>
On changing a ref, the old SHA1 is not updated in the object => ref
mapping. This means search by object ID may still turn up a ref from
deeper within the stack. To fix this, check all refs produced by the
merged iterator against the merged reftables.
Signed-off-by: Han-Wen Nienhuys <hanwen@google.com>
Change-Id: I41e9cd395b0608eedeeaead0a9fd997238d747c9
The flag enabling sideband-all is used in two places: in UploadPack
for advertisement and in the protocol parser to read it from the
request.
This leds to problems in distributed deployments where the two requests of
a fetch can go to different servers with different configurations.
Use the existing allowsidebandall to accept the sideband-all request
(and respond to it) and introduce a new "advertisesidebandall" to toggle
the advertising of the feature.
Change-Id: I892d541bc3f321606c89bad1d333b079dce6b5fa
Signed-off-by: Ivan Frade <ifrade@google.com>
Note that TreeWalk.forPath() needs not be closed; the ObjectReader
_is_ closed when that method returns.
Change-Id: I6e022e4a2fde0c88d610a82de092ea541b33f75c
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
The object identifying packfiles to send them via packfile-uri contains
only the uri and the hash. This is the information that goes through the
wire. It would be useful to know also the size of those packfile, for
example to track how many bytes have been offloaded to HTTP.
Add size field the CachedPackUriProvider.PackInfo object.
Change-Id: If6b921b48a4764d936141c777879b148cc80bbd3
Signed-off-by: Ivan Frade <ifrade@google.com>
The DELIM and END constants are deprecated and using them causes
warnings. Replace them with the accessor methods.
Change-Id: Iadb27000755e8fd8c61d9218591f9d110b8265c8
Signed-off-by: David Pursehouse <david.pursehouse@gmail.com>
Also correctly parse the "always" value (allowed in canonical git
since git 2.12.0[1]). Adapt the ReflogWriter.
[1] https://github.com/git/git/commit/341fb2862
Bug: 551664
Change-Id: I051c76ca355a2ac8d6092de65f44b18bf9aeb125
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
MergedReftable is not used as an AutoCloseable, because closing tables
is currently handled by DfsReftableStack#close.
Encode that a MergedReftable is a list of ReftableReaders. The previous
code suggested that we could form nested trees of MergedReftables,
which is not how we use reftables.
Change-Id: Icbe2fee8a5a12373f45fc5f97d8b1a2b14231c96
Signed-off-by: Han-Wen Nienhuys <hanwen@google.com>
Otherwise the paths modified by a cherry-pick with conflicts won't be
reported as modified via WorkingTreeModifiedEvents.
Change-Id: I875b67c0d2f68efdf90a9c32b80a2e074ed3570d
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
This makes the intended use of the classes more clear. It also
simplifies generic functions that write reftables: they only need a
ReftableWriter as argument, as the stream is carried within the
ReftableWriter.
Change-Id: Idbb06f89ae33100f0c0b562cc38e5b3b026d5181
Signed-off-by: Han-Wen Nienhuys <hanwen@google.com>
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
In https://git.eclipse.org/r/c/144009/ UploadPack tests moved from
thrown to assertThrows, but newly introduced tests are still using
the thrown.
Update test so all of them use assertThrows.
Change-Id: I0ff19a6f8ba9e978d8ffc7a912c0572d9f00c7fa
Signed-off-by: Ivan Frade <ifrade@google.com>
Make a general test with all the cases, like request
advertised/unadvertised tips, reachable/unreachable from those tips,
commits/blobs.
Implement specific validator tests as subclasses. Each test provides the
validator instance and tells what cases are valid.
Change-Id: I7f961fcc05f7fabbeae1ba8ff73d99072ce8fc72
Signed-off-by: Ivan Frade <ifrade@google.com>
UploadPackTest is already too long and it is covering too many aspects
of UploadPack. This makes difficult to see what is tests and if all
cases are covered.
Move the reachability-related tests to its own file. This moves also an
auxiliary function, reducing the length of UploadPack. Complete also the
coverage, adding combinations of bitmap availability/commits or
blobs/reachable or not.
Change-Id: Id5cfc9d0118d997da30e3886c91db996a86250fc
Signed-off-by: Ivan Frade <ifrade@google.com>
Older JGit stored only milliseconds timestamps in the index. Newer
JGit may get finer timestamps from the file system. This leads to
slow index diffs when a new JGit runs against an index produced
by older JGit because many timestamps will differ and JGit will
then do many content checks. See [1].
Handle this migration case by only comparing milliseconds if the
index entry has only millisecond precision.
The inverse may also occur; also compare only milliseconds if the
file timestamp has only millisecond precision.
Do the same also for microsecond resolution. On Windows, NTFS may
provide 100ns resolution and may be used by external programs writing
the index, but Java's WindowsFileAttributes may provide only
microseconds.
File timestamp precision in Java depends not only on the Java APIs
used by different JGit versions but may also change when running the
same Java code on different VMs. And of course the resolution may
vary among operating and file systems. Moreover, timestamp precision
in the index depends on the program that wrote the index. Canonical
git may use a different resolution, maybe even different between git
versions.
[1] https://www.eclipse.org/forums/index.php/t/1100344/
Change-Id: Idfd08606c883cb98787b2138f9baf0cc89a57b56
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
allRefs determined the end of the ref block without accounting for
index or log blocks. This could cause other blocks to be interpreted
as ref blocks, leading to "invalid block" error messages.
Change-Id: I7b9323e7d5e0e7d64535b3ec1efd576aed1e9870
Signed-off-by: Han-Wen Nienhuys <hanwen@google.com>
Using buildifier from master branch and the command:
$ buildifier -r -lint fix -warnings all .
Change-Id: I19c8ff183081093cb73bed7221a78a91b6cba4dc
Signed-off-by: David Pursehouse <david.pursehouse@gmail.com>
Using buildifier from master branch and the command:
$ buildifier -r -lint fix -warnings all .
Change-Id: I52a18c09a1f192e2141f4156f9c1aabbbdbc910a
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Ivan Frade
Han-Wen Nienhuys
Thomas Wolf
Masaya Suzuki
Matthias Sohn
Jonathan Tan
David Pursehouse