If an application uses PushConnection directly on the native Git wire
protocols JGit should send along the application's expected oldId, not
the advertised value. This allows the remote peer to compare-and-swap
since it was not tested inside JGit.
Discovered when I tried to use a PushConnection (bypassing the
standard PushProcess) and the client blindly overwrote the remote
reference, even though my app had supplied the wrong ObjectId for
the expectedOldObjectId. This was not expected and cost me over an
hour of debugging, plus "corruption" in the remote repository.
By passing along the exact expectedOldObjectId from the app the
remote side can do the check that the application skipped, and
avoid data loss.
Change-Id: Id3920837e6c47100376225bb4dd61fa3e88c64db
FileTreeIterator was calling by mistake
WorkingTreeIterator.idSubmodule(Entry). Instead it should always compute
idSubmodule on its own.
Change-Id: Id1b988aded06939b1d7edd2671e34bf756896c0e
In I1f5dc07182dbf6bba2a9f4807fdd25b475da4ead, FileBasedConfig got
support for reading a configuration with UTF8 BOM. Apply the same
support to BlobBasedConfig, to make SubmoduleWalk able to parse
.gitmodules configurations with BOM.
Change-Id: I25b5474779952fe2c076180b96fc2869eef190a8
Signed-off-by: Doug Kelly <dougk.ff7@gmail.com>
The ChainingCredentialsProvider gave up chaining to the next provider if
the first one returned no credentials items for the given URI.
Change-Id: I9539c50db35e564db9d43d8ebb71d7e9c6fdcc19
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
JGit's Nullable type was added[1] in the hope of being able to add
nullness annotations that (a) do not preclude building and running
with Java 7 and (b) could be shared by Gerrit, which uses a custom
Nullable type for other reasons[2]. Sharing a type is useful because
Eclipse's null analysis is only able to use one Nullable type at a
time in a given workspace (so for this analysis to function in a
workspace used to develop Gerrit, JGit and Gerrit would need to use
the same Nullable type).
The new Nullable type has CLASS instead of RUNTIME retention because
there wasn't any obvious use for the annotation at run time.
Gerrit uses the Nullable annotation to communicate with Guice. Guice
injection happens at runtime, so it needs to be able to read the
@Nullable annotations at run time[3]. Otherwise Guice produces
provisioning errors, such as
3) null returned by binding at com.google.gerrit.lucene.LuceneChangeIndex$Factory.create()
but parameter 7 of com.google.gerrit.lucene.LuceneChangeIndex.<init>() is not @Nullable
Switch to RUNTIME retention to avoid this.
While at it, update the javadoc to explain more clearly how this
annotation relates to other Nullable types[4]. This should make it
clearer why JGit needed another Nullable type:
A. Avoiding dependency on Java 8
B. RUNTIME retention to allow Guice to read the annotation at run time
C. Named Nullable so Guice can recognize the annotation
D. Not an addition to Java EE's javax.annotation package, to avoid
the split-package problem[2] that prevents the annotation from
being readable at run time when loaded from an OSGi container
E. Avoiding heavyweight dependencies, deprecated dependencies, and
dependencies on package internals
org.checkerframework.checker.nullness.qual.Nullable: A
com.sun.istack.internal.Nullable: B, E
*.CheckForNull, *.NullAllowed, etc: C
edu.umd.cs.findbugs.annotations.Nullable: B, E
javax.annotation.Nullable: D
org.eclipse.jdt.annotation.Nullable: B
org.jetbrains.annotations.Nullable: B
org.jmlspecs.annotation.Nullable: E
android.annotation.Nullable, android.support.annotation.Nullable: E
[1] https://git.eclipse.org/r/59993
[2] https://gerrit-review.googlesource.com/50112
[3] https://github.com/google/guice/blob/master/core/src/com/google/inject/internal/Nullability.java
[4] https://github.com/typetools/checker-framework/blob/5832a01f1/checker/src/org/checkerframework/checker/nullness/NullnessAnnotatedTypeFactory.java#L118http://types.cs.washington.edu/checker-framework/current/checker-framework-manual.html#nullness-related-work
Change-Id: I6c482653d2b53e3509abb11211b67fc29cf2949c
Signed-off-by: Jonathan Nieder <jrn@google.com>
If the password char array is null constructing a new String from this
array fails with a NPE. Add a null check to fix this.
Change-Id: Ifae6eecca38d5f114861f44658a32521e6e96866
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
This should mirror the behavior of `git push --atomic` where the
client asks the server to apply all-or-nothing. Some JGit servers
already support this based on a custom DFS backend. InMemoryRepository
is extended to support atomic push for unit testing purposes.
Local disk server side support inside of JGit is a more complex animal
due to the excessive amount of file locking required to protect every
reference as a loose reference.
Change-Id: I15083fbe48447678e034afeffb4639572a32f50c
PreReceiveHook is given a Collection<ReceiveCommand> and it can be
very useful here to call ReceiveCommand.filter(cmds, NOT_ATTEMPTED).
Overload filter to accept both Iterable and List.
Keep backwards binary compatibility for List by upcasting to Iterable.
Change-Id: Ib1341876c703670945ef209edc8259715ee86c26
Recursively copying a tree into a DirCache is a bottleneck for some
algorithms like the in memory merge code in Gerrit Code Review. Drop
a layer down in the stack and use CanonicalTreeParser directly as the
addition logic only processes 1 tree at a time and does not need the
merge sorting feature (or overhead) of TreeWalk.
Combined with 761814fe9c ("DirCacheEntry: Speed up creation by
avoiding string cast") tree loading 38,900 entries nearly halves
in running time from 70ms to 36ms on some platforms.
Change-Id: If1490ca25de0679a71cf508f59b486f9cc816165
Application code sometimes wants to read a DirCache from an ObjectId,
but its confusing how to do this because its buried inside the
DirCacheBuilder.
Use this utility in a few places within JGit that also want to read
a DirCache from a tree's ObjectId.
Change-Id: I578b7e18e58753d154937f4ab835012b09e5adca
Instead of checking every entry for .gitattributes only look for the
entry on request by TreeWalk. This avoids impacting uses like RevWalk
filtering history.
When the attrs is requested skip to the start of the tree and look for
.gitattributes until either it is found, or it is impossible to be
present. Due to the sorting rules of tree entries .gitattributes
should be among the first or second entries in the tree so very few
entries will need to be considered.
Waiting to find the .gitattributes file by native ordering may miss
attrs for files like .config, which sorts before .gitattributes.
Starting from the front of the tree on demand ensures the attributes
are parsed as early as necessary to process any entry in the tree.
Due to TreeWalk recursively processing up the tree of iterators we
cannot just reset the current CanonicalTreeParser to the start as
parent parsers share the same path buffer as their children.
Resetting a parent to look for .gitattributes may overwrite path
buffer data used by a child iterator. Work around this by building a
new temporary CanonicalTreeParser instance.
Change-Id: Ife950253b687be325340d27e9915c9a40df2641c
Line breaking before , is ugly to read. Most formatters and humans
expect line break after , so update a few offensive locations.
Use String.format() for the construction of the error message when
a bad DirCachEntry is being failed on. This simplifies the code and
its not a performance critical section.
Change-Id: I5d990389e7ba24ef0861cf8ec0026ed030d4aeda
The checkPath function is available as a byte[] form, in fact the
String form just converts to byte[] to run the algorithm.
Having DirCacheEntry take a byte[] -> String -> byte[] to check if
each path is valid is a huge waste of CPU time. On some systems it
can double the time required to read 38,999 files from trees to the
DirCache. This slows down any operation using a DirCache.
Expose the byte[] form and use it for DirCacheEntry creation.
Change-Id: I6db7bc793ece99ff3c356338d793c07c061aeac7
The internal array may be longer than entryCnt, in this case the tail
of the array is padded with null entries. Do not return those to the
caller of getEntriesWithin().
Change-Id: I19efb05e103fab6b739ced407f6e28155a48dba6
If defined in .gitattributes call smudge filter during checkout.
To support checkout where current HEAD,index do not contain attributes
we need to also consider attributes from the tree we checkout. Therefore
CanonicalTreeParser has to learn how to provide attributes.
Change-Id: I168fdb81a8e1a9f991587b3e95a36550ea845f0a
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
When filters are defined for certain paths in gitattributes make
sure that clean filters are processed when adding new content to the
object database.
Change-Id: Iffd72914cec5b434ba4d0de232e285b7492db868
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Attributes represents a semantic collector of Attribute(s) and replaces
the anonymous Map<String,Attribute>. This class will be returned by
TreeWalk.getAttributes(). It offers convenient access to the attributes
wrapped in the Attributes object. Adds preparations for a future
Attribute Macro Expansion
Change-Id: I8348c8c457a2a7f1f0c48050e10399b0fa1cdbe1
Signed-off-by: Ivan Motsch <ivan.motsch@bsiag.com>
When FS.runProcess was called and an InputStream was given the method
tried to pump the whole InputStream to the process. When the method
ended the InputStream was not giving any data anymore. Consequently
close the InputStream inside the method.
Change-Id: I0ed738a775e5c977b21447d195acee1ecf5e2cb9
When running from a non-bare repository, "jgit repo" checks whether
the rev passed in is a sha1 or branch name and in the latter case will
check out origin/<branch>.
We are expecting refs/remotes/origin/<branch>, but as a side effect of
using getRef we also end up looking for refs/origin/<branch>,
refs/heads/origin/<branch>, and so on. Avoid that by using exactRef
instead.
Signed-off-by: Jonathan Nieder <jrn@google.com>
Change-Id: I670b2e48a88138a1f2104ea201baa958e9edbddb
The Repository class provides only one method to look up a ref by
name, getRef. If I request refs/heads/master and that ref does not
exist, getRef will look further in the search path:
ref/refs/heads/master
refs/heads/refs/heads/master
refs/remotes/refs/heads/master
This behavior is counterintuitive, needlessly inexpensive, and usually
not what the caller expects.
Allow callers to specify whether to use the search path by providing
two separate methods:
- exactRef, which looks up a ref when its exact name is known
- findRef, which looks for a ref along the search path
For backward compatibility, keep getRef as a deprecated synonym for
findRef.
This change introduces findRef and exactRef but does not update
callers outside tests to use them yet.
Change-Id: I35375d942baeb3ded15520388f8ebb9c0cc86f8c
Signed-off-by: Jonathan Nieder <jrn@google.com>
org.eclipse.jgit.lib.Repository class is an example of the API which
should be written with Java 8 java.util.Optional<T> type. Unfortunately
this API is already released and widely used. The good clients are
currently doing their best with checking return values for null and bad
clients do not know how bad their code is.
I've tried not to change any logic and to be as less intrusive as
possible. Most of the JGit code was well prepared to this, only few
classes needed some smaller fixes.
This change fixes all compiler errors in JGit and replaces possible
NPE's with either appropriate exceptions, avoiding multiple "Nullable
return" method calls or early returning from the method.
Because annotating getDirectory() and getFS() as Nullable would cause
lot of additional changes in JGit and EGit they are postponed.
Change-Id: Ie8369d2c9c5fac5ce83b3b1b9bc217d7b55502a3
Signed-off-by: Andrey Loskutov <loskutov@gmx.de>
File, FileInputStream and friends may throw FileNotFoundException even
if the file is existing e.g. when file permissions don't allow to access
the file content. In most cases this is a severe error we should not
suppress hence rethrow the FileNotFoundException in this case.
This may also fix bug 451508.
Bug: 451508
Change-Id: If4a94217fb5b7cfd4c04d881902f3e86193c7008
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
The class FS_Win32 was always trying out to create a temporary symlink
in order to find out whether symlinks are supported. FS_Win32_Cygwin was
overwriting this method and always returned true. But when the user
running JGit does not have administrative rights then the creation of
symlinks is forbidden even if he is running on FS_Win32_Cygwin. A lot of
tests failed only on the Windows platform because of this. It was
correctly detected that FS_Win32_Cygwin is the filesystem abstraction to
be used but creation of symlinks always failed because of lacking
privileges of the user running the tests.
This fix teaches FS_Win32_Cygwin to behave like FS_Win32 and to test
whether symlinks can be created in order to find out whether symlinks
are supported.
Change-Id: Ie2394631ffc4c489bd37c3ec142ed44bbfcac726
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
This fixes a warning saying this filter isn't needed anymore.
Change-Id: If77056378befe86c1773950dbe48a82c833fd532
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
getRef() loops over its search path to find a ref:
Ref ref = null;
for (String prefix : SEARCH_PATH) {
ref = readRef(prefix + needle, packed);
if (ref != null) {
ref = resolve(ref, 0, null, null, packed);
break;
}
}
fireRefsChanged();
return ref;
If readRef returns null (indicating that the ref does not exist), the
loop continues so we can find the ref later in the search path. And
resolve should never return null, so if we return null it should mean
we exhausted the entire search path and didn't find the ref.
... except that resolve can return null: it does so when it has
followed too many symrefs and concluded that there is a symref loop:
if (MAX_SYMBOLIC_REF_DEPTH <= depth)
return null; // claim it doesn't exist
Continue the loop instead of returning null immediately. This makes
the behavior more consistent.
Arguably getRef should throw an exception when a symref loop is
detected. That would be a more invasive change, so if it's a good
idea it will have to wait for another patch.
Change-Id: Icb1c7fafd4f1e34c9b43538e27ab5bbc17ad9eef
Signed-off-by: Jonathan Nieder <jrn@google.com>
If the index file exists but can't be read for example because of wrong
filesystem permissions we should throw a specific exception. This allows
EGit to handle this error situation.
Bug: 482607
Change-Id: I50bfcb719c45caac3cb5550a8b16307c2ea9def4
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
According to [1] the pre-push hook expects two parameters which provide
the name and location of the destination remote, if a named remote is
not being used both values should be the same.
We did set the first parameter to null in that case which caused
ProcessBuilder to throw a NullPointerException since its start() method
doesn't accept null arguments.
[1] https://git-scm.com/docs/githooks#_pre_push
Bug: 482393
Change-Id: Idb9b0a48cefac01abfcfdf00f6d173f8fa1d9a7b
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
When checking out a branch we need to access the attributes stored
in the tree to be checked out. E.g. directly after a clone we checkout
the remote HEAD. In this case index and workingtree are still empty.
So we have to search the tree to be checked out for attributes.
Change-Id: I6d96f5d095ed2e3c259d4b12124e404f5215bd9f
Adds the getAttributes feature to the tree walk. The computation of
attributes needs to be done by the TreeWalk since it needs both a
WorkingTreeIterator and a DirCacheIterator.
Bug: 342372
CQ: 9120
Change-Id: I5e33257fd8c9895869a128bad3fd1e720409d361
Signed-off-by: Arthur Daussy <arthur.daussy@obeo.fr>
Signed-off-by: Christian Halstrick <christian.halstrick@sap.com>
Other plugins which want to use JGit nullness annotations in their code
cannot do this if the annotations aren't part of the published API.
Unfortunately it looks like although Eclipse JDT allows to use custom
nullness annotation types per project, it does not understand if those
annotations are used mixed with other nullness annotations in other
projects. E.g. EGit can either configure JGit annotations for NPE
analysis and so "understand" nullness from JGit API but so it loses the
ability to use any other nullness annotations to annotate its own code.
Change-Id: Ieeeb578c2fe35223a7561d668dce8e767dc89ef0
Signed-off-by: Andrey Loskutov <loskutov@gmx.de>
The annotation is required for example in Repository case (patch
follows), where almost all non-void return methods return Nullable
except few returning NonNull. I definitely do not favor this style, but
it is a nightmare to clients to guess if the null check is needed or
not.
Change-Id: Ib2a778a246c6d84b7c32565f54df2385b59f6498
Signed-off-by: Andrey Loskutov <loskutov@gmx.de>
When JGit tries to detect symlink support the attempt to create a
symlink may fail with a java.lang.InternalError. This was reported for a
case where the application using JGit runs in Windows XP compatibility
mode using Oracle JDK 1.8. Handle this by assuming symlinks are not
supported in this case.
Bug: 471027
Change-Id: I978288754dea0c6fffd3457fad7d4d971e27c6c2
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
When asked to read a symref pointing to a branch-yet-to-be-born (such
as HEAD in a newly initialized repository), getRef and getRefs provide
different results.
getRef: SymbolicRef[HEAD -> refs/heads/master=00000000]
getRefs and getAdditionalRefs: nothing
exactRef should match the getRef behavior: it is meant to be a
simpler, faster version of getRef that lets you search for a ref
without resolving it using the search path without other semantic
changes. But the fallback implementation of exactRef relies on getRefs
and produces null for this case.
Luckily the in-tree RefDatabase implementations override exactRef and
get the correct behavior. But any out-of-tree storage backend that
doesn't inherit from DfsRefDatabase or RefDirectory would still return
null when it shouldn't.
Let the fallback implementation use getRef instead to avoid this.
This means that exactRef would waste some effort traversing the ref
search path when the named ref is not found --- but subclasses tend to
override exactRef for performance already, so in the default
implementation correctness is more important.
Bug: 478865
Change-Id: I60f04e3ce3bf4731640ffd2433d329e621330029
When attempting to determine the size of a blob that does not exist,
the RenameDetector throws a MissingObjectException.
The fix is to return a size of zero if the size is requested for a blob
id that doesn't exist.
Bug: 481577
Change-Id: I4e86276039c630617610cc51d0eefa56d7d3952f
Signed-off-by: Rüdiger Herrmann <ruediger.herrmann@gmx.de>
When asked to read a symref pointing to a branch-yet-to-be-born (such
as HEAD in a newly initialized repository), DfsRepository and
FileRepository return different results.
FileRepository:
exactRef("HEAD") => null
DfsRepository:
exactRef("HEAD") => SymbolicRef[HEAD -> refs/heads/master=00000000]
getRef("HEAD") returns the same as DfsRepository's exactRef in both
backends.
The intended behavior is the DfsRepository one: exactRef() is supposed
to be like getRef(), but more exact because it doesn't need to
traverse the search path.
The discrepancy is because DfsRefDatabase implements exactRef()
directly with the intended semantics, while RefDirectory uses a
fallback implementation built on top of getRefs(). getRefs() skips
symrefs to an unborn branch.
Override the fallback implementation with a correct implementation
that is similar to getRef() to avoid this. A followup change will fix
the fallback.
Change-Id: Ic138a5564a099ebf32248d86b93e2de9ab3c94ee
Reported-by: David Pursehouse <david.pursehouse@sonymobile.com>
Improved-by: Christian Halstrick <christian.halstrick@sap.com>
Bug: 478865
This reverts commit bbcbcab8d3.
These classes were part of the public API and should not be removed
until JGit 5.0.
Change-Id: Ife4bee69f82151de6ef8ea1a4c6c146d91bbf0d5
Matthias Sohn
Shawn Pearce
Christian Halstrick
Andrey Loskutov
Kaloyan Raev
Doug Kelly
Jonathan Nieder
Shawn Pearce
Ivan Motsch
Arthur Daussy
Rüdiger Herrmann